Could not import all of the PowerPoint slides

Similar Questions

• Could not import all of the files in Lightroom

  I've been using Lightroom since Beta 3, but never meet this problem before. He apparently don't ingest photos. (I usually ingest RAW and convert to .dng but it won't let me even copy without converting them to .dng.)

  I tried two readers of different cards, two different cards, with pictures (one CFDC, a SDHC), most copied photos of CF card on my desk and tried to eat there. I also have an auto import to my desktop folder (to put in the files scanned my scanner) will not import. :-( It's used to work like a charm.

  I use LR v3.4.1 on a Mac Pro with 14 GB of RAM. I ran Apple disk First Aid, as well as the latest version of Diskwarrior on this hard drive: no problems found.

  The photos can be viewed on both cameras, they came. I can see them in Lightroom before I attempt ingestion.

  The error message that appears when I click on to ingest is: 'some import operations was made' and inside this window: 'the following files were not imported because they could not be read. (466),"then it shows the folder structure. All of the photos I am trying to import are RAW files, but those sent to my folder to auto import on the desktop of my scanner was RAW, tiff and jpeg. None would have the auto import. :-(

  Any solution for me?

  Only, I have solved my problem.  For reasons that I don't understand, I didn't write permissions to the folder where to put my LR library.

  To solve this (Mac)-, I selected the folder that is located at the top of my directory structure of library (in fact - at the top of the directory tree) and made a command-i.

  From there on, I opened the "sharing & permissions" section and made sure that I have and reading and writing.  Then, I selected "apply to the elements included...". "in the menu of gear below and now, everything is good.

  I hope this helps others who run on this issue.

  Steve

• Setup could not find all of the products available for installation. Windows Update suggests to install 125KO Office 2007 SP1 repeatedly.

  Hello!
  Update for Windows Vista x 64 to Windows 7 x 64 caused the following errors:
  By clicking on the "Edit" button in "Programs and features" with Office 2007 trial selected gives an error "Setup error".
  Setup could not find all of the products available for installation. Please contact your systm administrator. "in Windows 7 x 64. Run the installation of Office 2007 trial version downloaded the file to change the components OK works.
  How to operate the button "Edit"?
  Windows Update suggests to install 125KO Office 2007 SP1 repeatedly. I agree to install each time, updates installs "successfully", but suggest Windows Update to install next time. It started to happen after uninstallation and reinstallation of Office 2007.
  Kind regards
  Dima

  125 KB is obviously not a ServicePack because this would be much MB in size, you have a number of KB (knowledge base) to go with the annoying update?

  How to use a Setup log file to troubleshoot installation in Office
  http://support.Microsoft.com/default.aspx/KB/826511

  How to read the Windowsupdate.log file
  http://support.Microsoft.com/kb/902093#appliesTo

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  As for the "Changes" problem that I have no real solution for this, only that you remove every bit of desktop of your machine and everything don't reinstall desktop applications you need.  It could be a corrupted registry which is behind this problem.

• Firefox will not import all of the favorite Internet explore

  All my favorites Internet Explore will not transfer on Firefox. I already tried all of the suggestions:

  • import from internet explore
  • Export Favorites to internet explore then import into firefox

  Only half of my favorites are passed to firefox. Very frustrating.

  If there are problems with importing IE bookmarks in Firefox, then export favorites in Internet Explorer to a HTML file and import this file in the Firefox Bookmarks Manager.

  If you don't have the menu bar in Internet Explorer, and then right-click on the toolbar above to activate the menu bar.

  • Export Favorites in Internet Explorer to a file (bookmarks.html) HTML:
    File > import and export
  • Import HTML file in Firefox:
    Bookmarks > show all bookmarks > import and backup > import bookmarks HTML

  See "Import from another browser" and "import from file":

  • http://KB.mozillazine.org/Import_bookmarks

• Could not import all the Favorites in IE 8

  Recently experienced the premature death of all new hard drive, but was able to save the files including the IE Favorites on a flash drive.  Now, try to import the Favorites in IE 8 (there are 1 500 +, separated in subfolders).  Export the main folder on the flash drive was not a problem.  How can I import the entire lot without doing each one individually?

  http://support.Microsoft.com/default.aspx/KB/211089/en-us

  Internet Explore 7

  To export the Favorites folder, follow these steps:

  1. In Internet Explorer, click Add to Favorites, and then click import and export.
  2. In the import/export wizard, click Next.
  3. Select Export Favorites, and then click Next.
  4. Click Favorites , and then click Next.
  5. Select the Favorites folder that you want to export. If you want to export all Favorites, select the top level Favorites folder. Otherwise, select the individual folder that you want to export.
  6. Click Next.

     Note By default, Internet Explorer creates a Bookmark.htm file in your Documents folder. If you want to use a different name than the file Bookmark.htm, or if you want to store the Favorites exported in a different folder in the Documents folder, specify the new file and the name of the folder.

  7. Click Next.

     Note If you already have a file with the same name, Internet Explorer asks you to replace. Click Yes to replace the file. Click No to provide a new file name.

  8. Click Finish.

  Internet explore 8

  To export the Favorites folder, follow these steps:

  1. In Internet Explorer, click Favorites, click the arrow next to Add to your Favoritesand then click import and export.
  2. Click export to a file, and then click Next.
  3. Click to select the Favorites check box, and then click Next.
  4. Select the Favorites folder that you want to export. If you want to export all Favorites, select the top level Favorites folder. Otherwise, select the individual folder that you want to export.
  5. Click Next.

     Note By default, Internet Explorer creates a Bookmark.htm file in your Documents folder. If you want to use a different name than the file Bookmark.htm, or if you want to store the Favorites exported in a different folder in the Documents folder, specify the new file and the name of the folder.

  6. Click Next.

     Note If you already have a file with the same name, Internet Explorer asks you to replace. Click Yes to replace the file. Click No to provide a new file name.

  7. Click export.
  8. Click Finish.
  Back to top

  Import Import Favorites to Internet Explorer 6 and earlier versions

  Use the Bookmarks Converter tool to import the Bookmark.htm file into Internet Explorer on Windows 95, Windows 98, Windows 98 Second edition, Windows Millennium Edition, Windows NT 4.0, or Windows 2000.

  Import Favorites to Internet Explorer 7

  1. In Internet Explorer 7, click Add to Favorites , and then click import and export.
  2. In the import/export wizard, click Next.
  3. Select Import Favoritesand then click Next.

     Note By default, Internet Explorer creates a Bookmark.htm file in your Documents folder. However, you can import favorites that are saved under another name. To do this, click Browse, select a file or type a location and a file name, and then click Next. Or, click Browse, and then click Next to accept the default value.

  4. Select the folder where you want to place the imported bookmarks, and then click Next.
  5. Click Finish.

  Import Favorites from Internet Explorer 8

  1. In Internet Explorer, click Favorites, click the arrow next to Add to your Favoritesand then click import and export.
  2. Click import from a file, and then click Next.
  3. Click to select the Favorites check box, and then click Next.
  4. By default, Internet Explorer creates a Bookmark.htm file in your Documents folder. However, you can import favorites that are saved under another name. To do this, click Browse, select a file or type a location and a file name, and then click Next.
  5. Select the folder where you want to place the imported bookmarks, and then click import.
  6. Click Finish.

  See you soon.

  Mick Murphy - Microsoft partner

• Could not import all of a sudden

  After you successfully import a picture tonight, I find that I can no longer import images into pictures.  When I click on import, the import window opens with my showing downloads folder, but is not where the image I want to import. After a few seconds, I get the spinning beachball and just can't navigate to another location or cancel import.  When I move my cursor out of the window, the beachball disappear, but I can't do anything in Photos, save Photos to quit smoking.  I tried to restart my computer, but that didn't help.

  Also, try to reset your iPhone: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  To isolate the problem on Photos or your iPhone, launch the Capture of images from your Applications folder and see if import works there.

• I just installed Firefox for the first time (v9.0.1) & could not save all of the bookmarks. I don't get an error message and it looks like my saved bookmark but when I watch my favorites, there is nothing there.

  I have also problems to import my IE Favorites. I went through the steps to import data from another browser, and it seems that it worked, but when I go to my favorites, it's always empty.

  In Firefox help (Alt + H) > troubleshooting information > Open containing folder. Open it this profile Firefox folder. Once the file is open, exit Firefox and rename the places.sqlite file in the folder and launch Firefox. Before importing anything, please try to score some sites and check.

  Files & Firefox profile folder

• How to resolve the error: "lightroom could not import this catalog due to an unknown error" during an attempt of "import catalog?

  I have about 400 000 pictures of so given the high number of 15 years, I had all my photos in 6 catalogues to avoid potential problems. All photos and catalogs are in a 4 TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.

  I wanted to have a NEW catalogue of all my rated 1 star + photos of all years in a single catalog. So I created this I called Catalog + Star and told me the best option is to import a catalog at a time, and because there is no way to filter import them just photos now, I would like to import all the photos and then delete all the photos of UnStared. I did for the catalog of the year 2014, but in the end gave me the message: "lightroom could not import this catalog because of an unknown error. He had in fact imported about 40 k pictures of about 50 k total. I tried again and again and each time I end up with the same thing. I created a new another catalog and looked from scratch and the same ting happened: EXACT 40 k photos or JUST have been imported and others were not! When I imported catalog year 2013 of about 45 photos of k, it worked perfectly. But when I imported catalog year 2012 35 k photos, it's the same thing!

  All the tips: 1) on how to solve this problem? and (2) if there is a way better and easier to create this main catalog of all looked at them Photos of all my catalogs?

  Okay, my starting point is that LR can contain fortunately 400000 + photos, and it's a mistake to create a 1 star and catalogue as you suggest. Instead, I would recommend that you create a master catalog of all your photos, you can then question however you want - 2 stars, or a certain keyword, or with "xyz" in the title, etc.

  If you are intent on going this way, you could try a slight change in what you have done so far. Instead of trying to import a complete catalogue and then delete photos of TSE, take the 2012 and 2014 catalogs and select only the photos 1 star. Then to Export in the catalog for these items and import the 2014-1star and 2012-1star in your new catalog. Can pass the problem images that I think are the problem.

  If this does not work, or if you follow my initial advice, you're going to need identify the image where the failure occurs. You may have a corrupted image file, and replacement of your backup can be enough to solve the problem. Alternatively, it may be a corrupted in the catalog folder, and in this case, it may be sufficient to remove the image from the catalog and import it again. You can try to select everything in the catalog of 2014 and see if you can do an export as catalog, creating a 2014 clean and delete file previews of 2014 could also get rid of a potential problem. Another thing is to try exporting in the catalog for images 1-40000, then a second export as catalog images 40002 - 50 k.

  So a few things that you need to try, rather than a magic bullet and a recommendation to change the underlying meaning.

  John

• Could not import the platform of error

  Hello
  
  I started the 3.1.0 agent HQ (the version with the included JRE) on a RedHat Linux 9 server and runs the automatic detection of the console of the server process. He discovered the new server as it should, but when I clicked on the button "Add to inventory", I got an error (see below).
  
  Impossible to import the platform: RuntimeException. nested exception is: org.hyperic.hq.common.SystemException: javax.ejb.TransactionRolledbackLocalException: error creating data IA platform: servers of type "FileServer" could not be created on the "Home network" type platforms CausedByException is: creation of data IA platform error: type servers 'FileServer' cannot be created on platforms of type "home network".
  
  Why is this happening?
  
  Thank you
  Brian

  I think there may be a misunderstanding here.  When you say that you "ran the autodiscovery process", which means exactly?  You shouldn't have to do anything else that start the agent on the platform, and then set up your dashboard HQ.  The platform will appear in the queue of the self-inventory and you can then import the platform and all discovered resources.  This type platform sounds like it should be "Solaris" and not "network host.  HQ thinks that it is a network host, leads me to believe that you tried to create a platform manually instead of using the discovery platform created to start the agent.

  Try the following steps:
  1 stop the agent on the affected platform.
  2. remove any resource platform linked to this inventory of HQ
  3. delete the "data" of the installation of the Agent HQ directory
  4. start the Agent from HQ (you will need to provide the login information from server again)
  5. connect to Headquarters as the superuser and look in the auto - inventory of your dashboard portlet.  The platform should appear there.
  6. Select the platform and click on the button to import it into your inventory HQ

  It should work, if not answered and I will work with you to get your server.log and agent.log and troubleshoot more.

• Could not import the RAW with LR4

  I have done the trial LR4... before LR3 and 1.  Could not import raw with 4 files.  MSG comes up saying, "After files were imported not because they cannot be read."  The reason I try it is because Canon 5 d Mk III and I was told HAD to get it for the treatment of the raw with this device.  Fine imports by iphoto.  I must admit, though, as a dunce, this morning, I put in a new CF card and forgot to format... but I don't think it's because I tried a few weeks previously and had same problem with a card which has BEEN formatted.  I had with iphoto, but they import them in a file on my desktop and then import from the desktop.  Tried this time, but the import column does not appear same office option.  And when I try the end of iphoto, and it arrives at its destination, I'm going under applications, and Adobe photoshop LR 4 is grey so I can't click on it to send pictures... Help!  (PLEEEZZZ!)  Thank you!

  Oh, BTW, I downloaded DNG Converter, but have no idea how it works, don't see a help file with it, and Yes, the version of LR 4 I'm trying is 4.3.

  King Tut mummy

  Post edited by: mother of King Tut\

  Quote 'Suite of files were not imported because they cannot be read.

  Make sure you have all the permissions read and write for all locations that you are trying to import the files. (for example if you try to import/copy files to a drive/folder where you have only read access, you will get this message) I think you see this message it is because before LR can read files is they must first be written/copied to the destination.

  Make sure you have full read/write access to all drives/folders, you work with.

• Could not import the Photoshop PSD

  It's weird. Try to import a PSD file. Message body cs6 error is "we were unable to open the file on the disk."

  The file is a fixed image that came to me as a JPG. I've read it in Photoshop cs6, cropped it, because the canvas 1920 x 1080 (to match the size of the sequence of the organism), tinkered and ended by running the action of course broadcast on this subject Luminance. Then I saved it in the body as a project folder *. PSD file. As I did hundreds of times now with dozens of projects.

  Attends agency cs6. Find the file using media browser. File... Import media browser gives me a window with the error message "We cannot open the file on the disk." Preview the Source monitor fails.

  What makes this even more frustrating, it is that the organization can find and open the file that I worked on just before this one. Same conditions, same process, same repertoire, same protections on files (I checked that). Two files seem to be exactly the same except for the file name and the content of the file. Everything else is also identical to that I can do. And none of my hard drives are even half full, so it shouldn't be a question of space.

  So if the organization can read one, why can't he read the other? And what I can do to get the Organization to behave correctly and read the file? Files do not appear to be corrupt - Photoshop can read them both very well. In any case, I've recreated the problem from the source repeatedly *.jpg file now so I think I can exclude from Photoshop file corruption on. Perhaps.

  I ruined my brain for 90 minutes trying to understand what has changed between the first file that works and one that doesn't. I came up empty. I worked on one, then the other, then imported the first on body (which worked), and then imported from the other in the body (which failed). Exact same source (both files were attachments on e-mail even *.jpg), same workflow, saved in the same directory. ARGHHHH!

  I did most of the 'usual suspects '. I left off Photoshop both body and restarted. I saved the file problem in other formats (same error no matter what format). So, I turned to Teh Google, that does not turn a large part that relates. Could not find anything in the Adobe Help documentation. So everyone here tell me what is happening?

  --

  Bruce Watson

  Few things to check - is the color of the RGB PSD Mode. It cannot be CMYK, or some other.

  I had problems with dynamic objects, because sometimes, they import all right, but not always.

  Layers of tiny (a few pixels x pixels) were causing problems.

  Adjustment layers have been known to cause problems.

  Normal layers, so long not tiny, always worked perfectly for me.

  Anything else that comes to my mind, but good luck.

  Hunt

• Could not import the music downloaded from iTunes for Windows Movie Maker.

  Could not import the music downloaded from iTunes for Windows Movie Maker.  He plays in Windows Live Movie Maker and plays on my computer.  Cannot find the codec. Tried the solution to this same question and in help.

  Hello
   
  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker. Some files also require you to install a codec before you can use the files in Windows Movie Maker.
  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
  Import video, photos and audio on Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-video-files-pictures-and-audio-into-Windows-Movie-Maker
  A problem of importing files into Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-importing-files-into-Windows-Movie-Maker
   
  Windows Movie Maker uses. WAV file formats and Apple's iTunes use it. AAC format.
  You can also try saving iTunes songs in the. WAV format instead of Mp3 format and check.
  For more information, see the link:
  http://support.Apple.com/kb/HT1550
  Hope this information is useful.

• Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  Thoughts?

  Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  I've uninstalled Reader and reinstalled, but the problem remains.  I also tried to repair the installation and that doesn't work anymore.

  Thanks for the tip.  It turned out that kind Reader has been commissioning in protected mode.  I changed the setting and it prints now as before.

  Thank you

• I have Adobe Creative Suite 5.5 Design Standard and I can't open Adobe Photoshop. A window pops up that says "could not initialize Photoshop because the preferences file was invalid (it was deleted)." All my other programs, such as Illustrator, are a

  I have Adobe Creative Suite 5.5 Design Standard and I can't open Adobe Photoshop. A window pops up that says "could not initialize Photoshop because the preferences file was invalid (it was deleted)." All my other programs, such as Illustrator, are able to open. Any help is appreciated. Thank you.

  Hello

  Maybe if you check Photoshop on the cover page of the victory 8 and choose Run as administrator from the options bar at the bottom of the page and then do the Ctrl Alt Shift.

  Kind regards

  Sheena

• I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map. The only import option is 'copy', not 'Add '.

  I had a problem with Lightroom on Microsoft Surface 3.  I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map.  The only import option is 'copy', not 'Add '.  I worked around this by mounting a network directory containing photos and imported from there.  Is it possible to stop Lightroom to see such a map as a camera?

  I have not tested, but it should work with Lightroom:

  http://stltechtalk.com/ultimate-Ms-surface-hack-fully-utilize-micro-SD-card/#.

  Not sure what happens if you remove the card and put in a similar SD card. I would like to test it so that you know what to expect.