Could not save the picture. Cannot print the illustration.

Similar Questions

• Problem in Adobe Illustrator CS6: could not open the illustration. Cannot complete the requested operation.

  Problem in Adobe Illustrator CS6: could not open the illustration. Cannot complete the requested operation.

  I was working on my .ai file and pasted a picture of PowerPoint to the adobe illustrator file. Then, AI crashed graphics colorful/patterns/images in my .ai file become black and white, and then I closed the file and may never reopen. I have tried a few apps demo available online recovery (as: service to restore file corrupted Illustrator for anyone ) but they do not work so far... What should I do? Thank you in advance!

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  deppie,

  Because obviously, cannot you try to copy and paste the work of a new document, one other thing that is often attempted is first of all create a new document and the file > Place (PDF summary, if any, of the) a corrupt how much can be saved this way.

  Here are a few Web sites I hope more effective where you can see if it can save the actual file, and if possible, you can pay a subscription having,.

  http://www.recoverytoolbox.com/buy_illustrator.html

  the http://Markzware.com/Adobe-Software/Fix-Illustrator-file-Unknown-error-occurred-pdf2dtp-fi collection.

  http://www.Illustrator.fixtoolbox.com/

  I remember, the first is for the victory and the second is for Mac, while the third should be both.

  Here are some pages about yourself the wrong with it:

  http://daxxter.WordPress.com/2009/04/16/how-to-recover-a-corrupted-Illustrator-AI-file/

  http://helpx.Adobe.com/Illustrator/KB/troubleshoot-damaged-Illustrator-files.html

  http://kb2.Adobe.com/CPS/500/cpsid_50032.html

  http://kb2.Adobe.com/CPS/500/cpsid_50031.html

  http://helpx.Adobe.com/Illustrator/KB/enable-content-recovery-mode-Illustrator.html

• HP 4620: HP 4620 scans very well, but could not save the analysis in a file

  The scanner scans very well, but could not save the analysis in a file. Whenever I try to save, it crashes.

  Hey @motikama,

  Welcome to the Forums of HP Support!

  I see that you encounter some problems with the scanning of your Officejet 4620 e-all-in-one for your Windows 7 PC. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Uninstall all software associated with the printer to your computer.
  2. Restart your PC.
  3. Download and install the latest drivers by clicking on this link.

  Please let me know the results after following the above. If you can scan, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Photosmart Premium C410b: could not save the scanned images

  I use the HP Scan application and the error message: -.

  Could not save the scanned images

  appears when you try to save in a folder as a PDF or any other format.

  Ironically, if I'm going by sending to the printer and then save to PDF it works!

  I checked and I'm using 4.2.2 with El Capitan HP driver software

  Any thoughts?

  Hello

  The application from HP for your printer is not compatible with El Capitan, so the output files incorrectly recorded.

  In the Hewlett-Packard folder move HP Scan to the trash and empty it.

  Before you install and use the HP Easy Scan application below which should save the files correctly:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Kind regards

  Shlomi

• Lightroom could not save the catalog

  I get the following error when trying to save my catalog:

  Lightroom could not save the name of the catalog 'Catalogue Lightroom'.

  I use Lightroom CC 2015.5

  I have over 300 GB of free space on my drive.  I have more than 3 GB of photos.

  Backup follows these steps before the failure:

  Integrity checking,

  Copy of catalog

  Catalog optimization

  The Catalog backup compression

  
  

  Any ideas on what to do next?

  I had a chat with Adobe session live support.  She has tried everything that you guys recommended then asked me to delete a bunch of files on my C drive because it was pretty full.  She said that this drive should be at least 2 x the size of the free catalog.  Once I cleaned stuff backup succeeded.  Thank you all.

• Adobe Illustrator CS6: Can not save the file as an EPS file.  Could not save the picture. Cannot print the illustration. Message

  In Adobe CS6 on a PC I can not save the file as an EPS file. I reinstalled the software and made a new document with a simple square in the file, but the error remains. I can save the file to any other format except in EPS format. The error window I said "can't save the picture. Cannot print the illustration. »

  

  Illustrator needs a printer.

  If you haven't set up the print to PDF format or something in the system.

• Could not save the privacy settings!

  I go into 'Settings '. On the 'privacy' in 'history' written ' Firefox: will be remembered in history. " Change to "use... custom parameters. ». Click OK. And then I go into 'Settings '. And behold, it is written: "Firefox: will be remembered in history," that is, the parameters are not changed, even if I changed the. What am I doing wrong and how fix it, please show me.

  Hello

  See the article How to fix preferences that will not save for clues that could help. It could just be that a file is set to read-only.

  Let us know if you find out what causes the problem!

• Could not save the WRT54G Router settings!

  Recently, I have reset the Linksys WRT54G Router because I can't get the page with a note to "CONTINUE", I used to have. I can also save the new setting. What comes out is a blank page. Pls help me. Thank you.

  This problem is usually caused by suboptimal communication between the computer and the router. The most common cause for this is a computer software firewall problem, but there are also several other possible causes:

  To view web pages of the router (and to solve problems "Cannot save settings"):

  You don't need an Internet connection. 'web Pages' of the router are integrated into the router.
  Use Internet Explorer, it usually works.
  JavaScript must be enabled.
  Use a computer that is connected to the router.
  In the non-working computer, temporarily disable your firewall software.

  Point your browser to 192.168.1.1, and then connect to your router. Your username must be left blank. Your password is "admin" (without the quotes), unless you changed it.

  If you use Zone Alarm, do a right-click on the ZA icon in the taskbar (bottom right of screen) then click on "Shutdown ZoneAlarm" and see if that solves your problem. If this does not work, try the following with Zone Alarm: open the control center ZAISS, go to privacy, then temporarily disable Ad Blocking and Cookie Control and see if it solves your problem.

  Some Zone Alarm users reported that the addition of 192.168.1.1 to their address list "of trust" solved the problem. This trick can also work with other firewalls.

  If you use Noton Internet Security with the add-on Pack, don't forget to disable the blocker and ad blocker. Some users have reported that they needed to uninstall all Norton Add-on Pack.

  If you can not get anything to 192.168.1.1 then perhaps this is not the address of the router. Go to 'Start' > all programs > Accessories > command prompt.
  A black DOS window will appear. Type "ipconfig" (with no quotes), and press the Enter key. Look at the "default gateway". It is 192.168.1.1? Point your browser to the 'default gateway', can connect you to your router.

  If the above fails, unplug your modem router, then try again. If it solves your problem, then you probably a "modem-router" rather than a regular modem. A report with this problem and also specify the brand and exact model of your modem (not router) number.

  If all above fails them, turn off your entire system, unplug it from the wall, wait a minute, then lights up, then try again.

  If all the above tips fail, then reset the default router: power down the router and unplug all the wires. Wait a minute. Switch on the router, let it fully boot (1-2 minutes), then press and hold the reset for 30 seconds button, then release the button and allow the router to reset and restart (2-3 minutes). Turn off the router. Wait a minute. To connect to a computer, cable, a router's LAN port. Initialize the system. It should work.

  If you still have problems, then you must download and install (or reinstall) the latest firmware for your router. After the update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.

• Error message: could not open the illustration. The illustration...

  Cannot open the illustration. The figure is greater than a limit of implementation.

  Faulty operator: ' % HiResBoundingBox:-1229.2598

  -6416.8828

  (((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((( (

  (((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((((( (

  (((((((((((((((((((((((((((((((

  I would maybe put counted the number of media.

  Any idea what's going on with my file? It worked yesterday and for 3 days before. 3 days of concepts for a customer. Check regularly recorded.

  Very frustrated and worried.

  CS4 Mac 10.6.4

  Caspian Sea

  

  Caspian,

  Some other suggestions:

  (1) you can see how much, if any, is saved by creating a new document and placing the damaged file.

  (2) you can try to repair the file, using this approach:

  http://kb2.Adobe.com/CPS/500/cpsid_50031.html

  http://kb2.Adobe.com/CPS/500/cpsid_50032.html

  One thing to try is perhaps to find the offending party

  %% HiResBoundingBox: - 1229.2598 - 6416.8828

  and remove this and

  (a) one/some mounts for the numbers of each type correspond.

  (b) something that follows and seems to be linked to the other party,

  (c) all the following.

• Could not import the illustrator file

  I can't import an illustrator file I exported from CorelDRAW. However, it opens fine in adobe illustrator, see gif animation and the attachment.

  http://www.sendspace.com/file/8anw2h [this is the link to the illustrator file]

  

  Have you tried to re-record in Illustrator?

• Illustrator cs4 error: could not open the illustration. Cannot print the illustration.

  Full disk error has occurred while printing.

  Everyone knows this? I am running Illustrator CS4 on a Mac Snow Leopard. The error occurs when starting to open an eps file on my computer, that are ALL my files Illustrator, sigh. I contacted Adobe and I was told this is a bug, and they have yet no solution. Does anyone know how to find out when the fix will be released?

  Thank you very much.

  If you do a Get Info on one of your files, which is listed as the program to open the .eps files? Try changing IT and change everything.

• I filled out all the fields with the data but could not save the file with the data.

  Please help because I do not restart and repopulate the data. I found that if I go in advance, then extend the functionality of Adobe Reader, I can fill in the form again and save and print it. But that's before I fill the data, now that I filled until I put it to extend the functionality, is there a way to save and print?

  Thank you.

  Hello.

  You cannot extend the reader a PDF with Adobe Reader form, it requires Acrobat Pro.

  Adobe Reader X and older versions cannot save a completed form is not extended to PDF, but it can be printed * in all cases.

  XI of Adobe Reader and Acrobat Reader DC can save and print * a PDF form completed, extended or not.

  Acrobat Pro or Standard (all versions) can save and print * a PDF form completed, extended or not.

  * Assuming no restriction file printing

• Could not save the different string value to each element of the array

  I have a configuration of VI to read several channels Veristand project.  The entrance is a table 1 d of channels, (an element for each channel, I want to read).  The channels have different names, each of the elements in the chain must be different.  I am able to edit each item and run the VI, and it works fine.  However, if I save, close and reopen the VI, all elements show the same value (what happens to the value of the last element for which I defined a default value).  Is this behavior planned, or have I missed a configuration setting which would allow different string values?  Please notify.  Thank you.

  GSinMN

  Make sure that you select the table and not only one item when you right click-> set by default on the front panel.

• Could not save the sound in windows 7 64 bit with Conexant Smartaudio HD

  Facing problem in sound recording & speech recognition in my laptop installed with Windows 7 Home Premium (64-bit).

  Audio by default in my portable device is HD(Driver version 8.54.0.53; date 18-02-2011) Conexant Smartaudio.
  The system is not able to any sound during recording. Verified that the microphone is not muted

  Hello

  It gives you no specific error message?

  If I had the same problem, I tried the methods to solve the problem.

  Method 1:

  I suggest you try to use the Audio playback problems troubleshooting to solve the problem. Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method2:

  I suggest you to update the driver on the manufacturer's Web site.

  See the link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-75899-1

   

  See also the link below:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  If this problem persists please post us. We will provide you with additional options that you can use to get the problem resolved.

• Could not open the file in Illustrator .eps

  I have a CS6 and I tried to open a .eps of our customer, then I have this message "could not open the Illustrator. The gall was generated by a newer og Illustrator and cannot be opened. The og Illustrator version I hva on CS6 is 16.0.0

  Try to create a new file I and then place the EPS in it.