Could not start Rescue and Recovery

Similar Questions

• Windows could not start. And I don't have an installation CD. Can someone help me?

  I have an Asus and since it fell from my Office I can't start Windows, it starts with a black screen and tells me to insert my disc of installation because of some "hardware or software changes."  I can never remember you get a Vista installation CD.

  Hello jkwendel,

  If you were not provided with a Vista CD, chances are that the image of the operating system is stored on a hidden partition on your PC. What you would ned to do is restore back to factory conditions. You, of course losing everything that is currently on your PC then, if all goes well, you have all the important files already saved.

  Check your PC user guidfe supplied with the PC to see what you need to do to restore to factory conditions.

  Alternatively, you can contact Asus and ask if they can provide you with your particular computer recovery discs. They will, fo course, charge you for these and the price could be higher than £50.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Lenovo 3000 N200 - cannot access Rescue and Recovery - MBR poss problem?

  I have a Lenovo 3000 N200 sick who was running XP home. I could not start XP and can only access the Rescue and Recovery utility in the Lenovo recovery Partition that would be to rebuild the hard drive to factory settings IE. Windows XP with no data. I managed to copy the data using a Paragon backup cd and then made the fatal mistake of attempting a repair MBR, which was a very tempting option on the Paragon rescue cd. Now, not only it does not boot to XP, but I can run is even more Rescue and Recovery to reinstall XP which is the problem!

  If I boot with windows install disc and take the option recovery console it stops, statement that "recovery console could not find the hard drives connected to your computer. Setup cannot continue. "

  I was wondering if someone another backup MBR restore could help me with this?

  So, if someone has a Lenovo 3000 N200 work and is willing to try to save the MBR to send it to me, then please get in touch. It is probably useful to make a backup for yourself where the same problems happen to you!  In my view, there are a bunch of programs that backup the MBR for example MBRtool, MBRWizard and so on.

  Any ideas, offer accepted with gratitude.

  Yes I know I could buy the Lenovo recovery disk, but it is a matter of principle for me avoid paying £50 or so if I can avoid it! We'll see if we can help here...

  Thank you

  Simonides

  I am pleased Andyp!

  The solution was to set the primary partition to inactive and value the recovery partition Active, then restart and use the Lenovo Care button (now finally works) to access the function of recovery so I could return the laptop to factory State.

  No doubt there are plenty of ways to do it, but the approach I took to solve this problem is released under

  1. use another PC to download Paragon backup and restore (I actually used the trial edition now but the free edition may have a similar feature)

  2nd burn a CD bootable backup and recovery 10.0.

  3. start the CD Lenovo, and after a long wait, a menu should appear with 11 options, the first of them being Paragon backup and restore.

  4. Select Paragon backup and restore.

  5 select properties in the pick a task window and you will see two partitions, a big enough (in my case Go 143, called Preload) and the other is quite small (6 GB called SERVICEV001).

  Note: this is an opportunity brilliant to use the Back Up Partition option to make a backup on external drive USB of the two partitions as the reconstruction of the hard drive with Lenovo Care button you will lose all data.

  6 right-click the partition preloads and select Edit and set idle

  7. made the SERVICEV001 partition right click and select Edit and set the Active

  8 remove the backup and recovery of CD and put it somewhere safe

  9. restart the PC and Lenovo Care button (might be called something different) should now work, allowing you to restore the hard drive to factory settings which will erase all data of a personal nature. You did a backup?

  10 Windows should then start as usual, reinstall Paragon backup and restore, and restore your data.

  Finally, look at this as a lesson to

  (a) you get a writable DVD and use the Lenovo menu under windows to create a floppy disk from Lenovo rescue and recovery started.

  (b) use Paragon or equivalent to create copies of images of each partition and ordinary differential copies of the primary partition.

  I hope this will help other owners who have a hidden rescue for example partition. IBM and HP and would like to receive feedback.

  Finally, I must acknowledge assistance patient e-mail provided by Taisia Smirnova Paragon support by offering me this solution.

  best, Simonides

  (If you found this helpful please click on the star to give me a point Bravo!)

• Rescue and recovery will not restore backup files it finds when starting

  I recently had a system problem on my Lenovo computer and had to recreate the image. When I try to restore my backup using rescue and recovery (R & R), they prove inaccessible. How to access these backups?

  Details of the options selected in R & R are attached, as an image on the screen of the settings dialog box.

  Running R & R, backups (on an external HDD USB) are visible and can be selected as expected. When the computer restarts in the space of restoration work, after a warning do not turn off the power, you get the error message "the restore has failed because the backup was not found at the specified location. Accept that the computer restarts in Windows. In this case regardless of the options selected at the start of R & R.  Where appropriate I select the USB external storage device in the Setup program and select a backup of those listed.

  I also tried updating all Lenovo utilities, including R & R. The option 'get new updates"errors when downloading the package information Lenovo Service Center (1 on 1) at the helm of the 30% with the error" Exception should not met!

  

  A lot of ongoing issues.  Many Lenovo post deal with each issue. Intel, system update, create a recovery to the USB media.

  For now, I'll address your problems of rescue and recovery. It seems that your system worked well, until a database had records in doubles in it, and you want to use RI to restore a backup on your USB.

  Then you have attempted a return to the factory, which show a lot of questions.

  If I understand your request, you want to restore your system to some time in the past, using a backup RNR. Either last week or 2 months ago. Something that works.

  ===

  RNR will save all partitions on the disk C DD.  It never saves another HARD disk.  2 readers warning has been around for a while. If C and D are on the C drive, HARD drive, it will run through RNR.

  Single file restore only runs on the windows RNR.  But there is no need to restart standalone RNR (pf11 during startup).

  It is ok. At least the RNR version on windows can find and restore your USB /rrbackups, of 5 min or 30 hours. This works.

  ==

  Factory restore installs a RNR version right here. This version probably does not match the version on your USB. If you started the RNR factory with the USB version version, you might expect not found messages.

  ===

  On your system windows today, please state the version installed.  Start using pf11 and indicate the version installed.

  You cannot create recovery media and rescue on the same device. Your luck if anything boots on the USB (other positions).

  Essentially, the RNR standaone version must match the /rrbackups on USB.

  =

  How do restore you to the factory settings? pf11 through the work of rnr or external cd/dvd?

  You are the original owner of the machine?

• Install upgrade-drive HARD T42 recovery discs but hard disk starts only in routine of Rescue and Recovery.

  I am doing a new installation in what follows rather than cloning because the system has not been reinstalled for 4 years.  A CD drive external usb (internal drive deleted), I installed the recovery disks on a 160 GB Samsung HM160HC PATA drive without problem.  Then you click on the button restart.  My T42 started immediately in the opening page of the routine of Rescue and Recovery.  On restart again once I use F12 to get the list of readers with the Samsung HDD.  This did not help.  Repeated many times start.  The computer could not watch any other player because the Samsung is the only one connected.  I'm tempted to download the update of the BIOS available from Lenovo that connected with the old 30 GB disk, while that my program of on-board controller is worm 3.04 and supposed to be suitable for the 160 GB drive upgrade.  If anyone has a suggestion please let me know.

  Hi ned11wils,

  Once the machine has restarted in recovery environment, there is an option there to restore to factory condition?

  IIRC, on these older machines, the restoration is a two-step process.  First use the CD to recreate the environment of recovery, then start the environment recovery and restore from the recovery partition BONE now restored.

  Z.

• Rescue and Recovery backup not file system - without error message

  I use, since 1985 the first IBM, Lenovo then. I was very happy, my next Lenovo will be bought next spring.

  But I'm just very disappointed. Daily tracks of rescue and recovery on the local disk, which later are copied to a backup drive.

  The program has never shown an error on the screen and still run perfectly-, I thought!

  A few days ago, I got a Windows error for the first time. There are a lot of missing files.
  I restored the system on the R & R and reboted. But cannot start.
  With a boot disk, I booted the system and could now see that all the Windows directory was empty!

  Unfortunately, I can not in R & R files see what files and directories contain a backup? Or can you?

  Question 1:

  So I would like to know how if someone can enlighten me.

  Then I started to investigate on what had happened. In c:-Library SWSHARE I found some files that I see is connected to R & R.
  In the engine.log file, I see R & R has written a large number of error lines, of which a part is reproduced below. File dates to 2011 and there are errors all the way

  Question 2:
  Why the program not onscreen when R & R run display errors, so that the user knows there are errors?

  Now I'm sitting at the bottom with a long nose, after 2 days and nights, trying to find a solution and restored the system several times and do not know how the file system works will come back on my PC so normally again.

  Be more happy if someone can tell me how to solve this problem.

  Here is a selection of error lines:

  Thu 17 Oct 08:41:59 ENGINE 2013: failed to send an IOCTL_FFDRIVER_ENCRYPT_OFF
  Thu 17 Oct 08:43:38 engine 2013: br_funcs.exe - version is '04.17.20a.00 '.
  Thu 17 Oct 08:43:40 engine 2013: CopySAM called with pwszDestination = "C:\RRbackups\common".
  Thu Oct 17 08:43:44 engine 2013: out of CopySAM with dwRet = 0 x 00000000
  Thu 17 Oct 17:00:09 engine 2013: br_funcs.exe - version is '04.17.20a.00 '.
  Thu 17 Oct 17:00:09 engine 2013: DeleteSISAndExclude (delType 1, drive letter C, Destination 'C:\RRbackups', level 12)
  Thu Oct 17 17:01:25 engine 2013: DeleteSISAndExclude out with return code 0 x 00000000
  Thu Oct 17 17:01:59 2013 engine: br_funcs.exe - version is '04.17.20a.00 '.
  Thu Oct 17 17:01:59 2013 Verbatim: WriteDriveContents (DriveLetter ='C:', Dest = 'C:\RRbackups', level = 13, SleepCount = 0, DeviceType = 1, dwOptFlags = 0 x 00000001)
  Thu Oct 17 17:05:48 2013 Verbatim: 0x00000010883e6399 - space required before compression
  Thu Oct 17 17:05:49 2013 Verbatim: 0x00000001ef30e1bf - estimated space required after compression
  Thu Oct 17 17:05:49 2013 Verbatim: 0x0000001dae2dd000 - currently available disk space
  Thu 17 Oct 17:07:27 2013 Verbatim: can't get exclusive lock for the entire file 'C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\cookies.sqlite-shm' - WinRC = 0x00000000
  Thu 17 Oct 17:07:30 2013 Verbatim: can't get exclusive lock for the entire file 'C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\healthreport.sqlite-shm' - WinRC = 0x00000000
  Thu 17 Oct 17:07:31 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\parent.lock" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu 17 Oct 17:07:33 2013 Verbatim: can't get exclusive lock for the entire file 'C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\places.sqlite-shm' - WinRC = 0x00000000
  Thu 17 Oct 17:07:34 2013 Verbatim: can't get exclusive lock for the entire file 'C:\Documents and Settings\Bendt Skov.DK\Application Data\Mozilla\Firefox\Profiles\gbkxfkqd.default\webappsstore.sqlite-shm' - WinRC = 0x00000000
  Thu Oct 17 17:08:28 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\Local Settings\Application Data\Microsoft\Windows\UsrClass.dat" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:08:30 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\Local Settings\Application Data\Microsoft\Windows\UsrClass.dat.LOG" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:02 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\NTUSER." DAT' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:09 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\Bendt Skov.DK\ntuser.dat.LOG" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:15 engine 2013: CreateFileW failed for the file 'C:\Documents and Settings\Application Data\Microsoft\Windows\UsrClass.dat.LOG LocalService' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:16 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\LocalService\NTUSER. DAT' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:17 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\LocalService\ntuser.dat.LOG" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:18 engine 2013: CreateFileW failed for the file 'C:\Documents and Settings\Application Data\Microsoft\Windows\UsrClass.dat.LOG Settings' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:19 engine 2013: CreateFileW failed for the file ' C:\Documents and NetworkService NTUSER. DAT' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:20 engine 2013: CreateFileW failed for the file "C:\Documents and Settings\NetworkService\ntuser.dat.LOG" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:09:25 Verbatim 2013: cannot save short name of "C:\hiberfil.sys" - WinRC = 0x00000020
  Thu Oct 17 17:09:25 engine 2013: impossible to attributes of record for the file "C:\hiberfil.sys" - WinRC = 0x00000020
  Thu Oct 17 17:09:47 2013 Verbatim: cannot save short name of "C:\pagefile.sys" - WinRC = 0x00000020
  Thu Oct 17 17:09:47 engine 2013: impossible to attributes of record for the file "C:\pagefile.sys" - WinRC = 0x00000020
  Thu Oct 17 17:11:50 engine 2013: CreateFileW failed for the file "C:\Program Files\Bitdefender\Bitdefender\onaccess.dat" and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:19:49 motor 2013: jump from the C:\Program Files\Bitdefender\Bitdefender\onaccess.dat file at the request of the user
  Thu Oct 17 17:23:10 engine 2013: CreateFileW failed for file ' C:\Program Files\Common Files\Bitdefender\Bitdefender threatens Scanner\smartdb - ntfs.db' and the reason was not a sharing violation - Windows RC = 0 x 00000020
  Thu Oct 17 17:33:13 engine 2013: jump to the folder C:\Program Files\Common Files\Bitdefender\Bitdefender threat Scanner\smartdb - ntfs.db at the request of the user
  Thu Oct 17 17:37:08 2013 engine: BackupFile failed - unable to "C:\WINDOWS" BackupRead - GetLastError() returns 0x00000020
  Thu Oct 17 17:37:08 2013 engine: unable to BackupFile directory C:\WINDOWS - dwRet = 0 x 00000516
  Thu Oct 17 17:37:09 2013 Verbatim: can't get exclusive lock for the entire file "C:\Documents and Settings\Bendt Skov.DK\Local Settings\Application Data\Microsoft\Outlook\outlook.pst" - WinRC = 0x00000000
  Thu Oct 17 17:37:13 2013 Verbatim: can't get exclusive lock for the whole of the file "C:\Documents and Settings\Bendt Skov.DK\Local Settings\Application Data\Microsoft\Outlook\Personal folders (1) .pst '-WinRC = 0 x 00000000"
  Thu Oct 17 17:37:15 2013 Verbatim: can't get exclusive lock for the entire file "C:\Privat\bendtskov-hotmail Arkiv.pst" - WinRC = 0x00000000
  Thu Oct 17 17:37:16 Verbatim 2013: can't get exclusive lock for the entire file "C:\Privat\morkebjerg-hotmail Arkiv.pst" - WinRC = 0x00000000
  Thu Oct 17 17:37:17 2013 Verbatim: WriteDriveContents exit with return code 0 x 00000000
  Thu Oct 17 17:37:25 engine 2013: br_funcs.exe - version is '04.17.20a.00 '.
  Thu Oct 17 17:37:25 engine 2013: CopySAM called with pwszDestination = "C:\RRbackups\common".
  Thu Oct 17 17:37:26 engine 2013: out of CopySAM with dwRet = 0 x 00000000
  Thu Oct 17 22:34:38 engine 2013: br_funcs.exe - version is '04.17.20a.00 '.
  Thu Oct 17 22:34:39 engine 2013: CopySAM called with pwszDestination = "C:\RRbackups\common".
  Thu Oct 17 22:34:42 engine 2013: out of CopySAM with dwRet = 0 x 00000000

  
  

• Today my Macbook Pro could not start.  He showed me the ban or no symbol.  I was able to access disk utility and run first aid on the SM0256G of SSD Apple media successfully.  Cannot start in normal/safe mode.  Should I delete/install so I can?

  MacBook Pro 13 '' end 2015.  256 GB SSD drive. El Capitan last version 10.11.4. I turned on the Macbook Pro and it could not start.  The progress bar with the Apple Logo would be present but would end not showing the symbol «»  I tried to boot mode safe - no go.  I have not reset PRAM help.  I was able to access disk utility and run successfully the first aid. No help. I was unable to restore two separate backup.  The utility show me backups however when I would go to the next screen and no backup is available.  Disk utility displays the SSD.  Can I erase the disc and download OS X install?  Thank you.

  At this point, there is no need to delete. A new copy of Mac OS X can be installed directly over the old copy. This process replaces the components of Mac OS X on a file by file basis and adds missing ones, there will be no major throwing away what anyone, unless there is a power failure.

  You have already run disk first aid.

  Now use mode of recovery (command + R to start) to "Re-install Mac OS X. It should install the latest revision of the main version that you ran last.

• Satellite C660D froze and won't start - Windows could not start

  OK, enough of the more dense person you will ever likely to meet when it comes to things like that. but will try my best to explain.

  There are a few days that my laptop has frozen on me on me having to turn it off and start it again by the power button. When I started again the message below appears.

  WINDOWS ERROR RECOVERY
  Windows could not start. A recent hardware or software change might be the cause.
  If windows files have been damaged or misconfigured in, Startup Repair can help diagnose the problem, if the power was interrupted during startup upward, choose start windows normally.

  -Launch start repair (recommended)
  -Start windows normally

  When I press launch Start up repair that it goes to a screen with a big cursor (that you can move) but nothing happens.
  When I pressed the start windows normally put it went through the windows logo while starting but then stops at this point.

  My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was dense enough: p

  Thanks for looking

  Dean

  > My question is, is - this easy to fix & if not where is the best place to consider to get fixed. Said I was pretty dense

  I think its easy to correct, but you'd need a Toshiba recovery disc.
  Have you created one in the past?

  If not, try to start the HARD drive recovery: turn on the device, press F8. Now choose fix my computer.
  Now new window should open, and here you must select Toshiba HDD recovery option. This would create the laptop back to factory settings.

  In case this isn't possible, you will need to boot from a recovery disk to reinstall the system.

• Rescue and recovery work do not

  I erased from my hard drive and installed Ubuntu. Now I need Vista to use some software to test for my state bar examination. Rescue and recovery disks as well as keep the f11 system restore gives me an error of starting. Vista is gone for good? Lenovo wants to charge me $45 to send discs that will work. Can get an a .iso for this version (Vista Business SP1 64, I think) somewhere and use my activation key product on the lower part of the PC? I don't have time to search the forums and I'm not an expert. Help, please.

  http://www.mydigitallife.info/2009/04/29/Windows-Vista-with-SP2-RTM-slipstreamedintegrated-DVD-ISO-i...

  something here should work for you.

• Rescue and recovery software will not remove preinstalled Partition

  I recently had a T450s by a great process and tries to get her comfortable environment again.

  My two latest Lenovo laptops had a recovery in the stock installation partition, and I was able to remove simply by running the top software and selecting an option amounting to "delete backup partition" or something allowing me to back up c.

  On this machine, I ran the software and he gave me an option to create a recovery media more. I installed the software, Thinkvantage Rescue and Recovery, and he has an option to delete backups, but does not recognize the partition.

  It's deeply annoying, I do not use it and he eats up to 15 GB. If anyone has a solution for this, please let me know.

  ADDENDUM:

  Moreover, now the software on the partition is not ongoing, saying: it does not find "recovburncd.exe" and try again. Help, please.

  So reinstall RNR has failed, but I realized that I could go into administrative tools and modify the disk partitions.

  I now have this problem solved, thank you for your comments.

• Windows error recovery. Windows could not start... _

  My Dell laptop I have from 10th July indicates the following:

  Windows error recovery

  Windows could not start.  A recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, chose to start windows normall7

  Start the reboot system (recommended)

  Start Windows normally

  The two options to return to the same screen.

  I tried the menu under the F keys, but all options listed do not seem to do anything.  I talked to Dell who ran a diagnostic test on the portable equipment and everything was ok.  They wanted then £70 the issue above which I am unhappy that have not had the laptop for a year yet!

  I would be very grateful if you could help!

  Thank you

  Mark

  Hello mtb123,

  1. have you tried the steps suggested by Srinivas R in the previous post to make a startup on your computer repair using the Windows installation disc?

  2. you remember what changes you made to the computer before you start this error?

  I suggest that you access the system recovery options using a Windows Vista installation disc and do a startup repair and if this fails, you can do a restore of the system from the Windows recovery environment.

  You can see the previous post of Srinivas R to verify the information on the system restore.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Delete backup files Rescue and Recovery after the uninstallation of r ' not R

  During the upgrade to Windows 10, Rescue and Recovery has been automatically uninstalled.  I had neglected to remove the external drive backup files before that.  I would like to locate these files so I can delete them manually.  What files are backups Rescue and Recovery?

  Y at - it a compatible version of Windows 10 Rescue and Recovery?

  I leave your external USB - HDD intact right now.

  You might like to win 10, win10 could not meet your needs and turn.

  A Loved via RNR win7 would be nice to have, just in case.

  If it comes to the test computer, your decision.

• Rescue and recovery of backup fails: current drive does not match the previous backup

  I have just rebuild my T60p with a new hard drive for the recovery of Lenovo CD via the rescue and recovery CD. Once the system restore is complete and the laptop running, I took a full backup using Rescue and Recovery. This backup is the C:\ drive which was the only drive I had and was on a USB hard drive.

  In recent days I have the C:\ split in two, giving me a new D: drive, patched all system software, added my own data, and obtained the machine configuration as I want. I've also trashed the R & R hidden partition so I could make a bigger drive D:\ and created my own bootable CD R & R for future use - not that it makes a difference.

  Now, I want to take a second backup with the Rescue and Recovery tool. Naturally I want to back up the disks C:\ and D:\, but the backup fails saying: -.

  "The last backup of this system include the following drive letters: C: .

  Your system is now back up these drive letters: C: d:

  Please define drive letters, as they were before and Christine backup. You may need to exclude partitions created since the last backup. »

  Is there anyway that I can make a backup of disks C:\ so my D:\?

  The only option I see is to delete my previuos backup and I don't want to do because it can be useful in the future if I still want to restore my system to original state manufactured.

  Suggestions anyone?

  Thanks, Iain

  Given that you have saved on an external USB disk your backup will be saved in a

  the folder named RRbackups.  If you rename this file I - think - R & R going to think

  you do not have any backups, so the next backup will be a 'base '. If you

  never have to restore the original of your 'base' backup, rename the folders should allow.

• Try reinstalling firefox on a windows machine 7 and I get «the application could not start correctly (0xc0000142)»

  To solve a different problem, I uninstalled Firefox. After you have solved the other issue I'm tying to re - install Firefox and get an error message that says that "the application could not start correctly (0xc0000142). Click OK to close the application. "The title bar of the window, said"setup - stub.exe - Application error. "My PC is a Dell Studio 19 all-in-one running Windows 7 Home Premium.

  I ended up solving this problem by doing a reinstall on Windows 7 site. It took a little while but fixed this and a few other issues I've had.

• Rescue and Recovery 4.21.00.16.00 have not installed

  I just use System Update to download and install Rescue and Recovery 4.21.00.16.00.

  He told me that she has not installed, but gave no reason and there is no error message.

  I tried again and SU acknowledges that it has been already downloaded, but the result was the

  even.

  Does this mean I'm stuck with 4.20.0511.00?

  I looked in my event viewer and has got a hint. Besides, knowing that my anti-virus program,

  BitDefender, willing of a feature which prevents the change to the registry without the permission of

  me and I had not asked for these, I decided to disable this feature, and then try again.

  It worked and I now have the latest version of rescue and recovery installed.