Count lines of ColumnsetContainer supported on the Web Client INTERFACE

Similar Questions

• Folders that I create in Thunderbird do not arise outside of Thunderbird (on the web client for my emails)

  Hello

  It's my first post because I can usually find supported using google, but I can't see any advice on this.

  Lets say I create a folder and name it 'sites' in Thunderbird, I created a rule for every email I get from stores online on their promotions go in this folder, so they do not distract the important emails, but I can view them later if I want.

  When I then log in my account outlook through their web client or if I check on my phone (which is where I'm mainly going through emails), the folders that I created in Tbird, do not show on my phone or the email provider webclient.

  I tried logging in and out of my web client and Tbird but records do not update, they remain in the Tbird but do not show in the web client or on my phone, which means that I can not read the messages held except when I home on Tbird.

  I appreciate your response.

  When your problem has been fixed, please mark the thread as "resolved".
  Thank you.
  Have a complete backup of your profile folder is strongly recommended in all cases.

• Google chrome is soon dropped in favour of web client plug-ins, so you have to use Flash to use the web client

  I use google chrome version 43.0.2357.81, since flash is no-no, recently I got this message when I connect my Datacenter, "this site uses a (VMware Remote Console Plug-in) plugin that soon unsupported. Currently, there are two warnings.

  Because IE and firefox requires flash to run the web client, so if Google drops support, several data center would 'LOVE' to use flash on their mission critical infrastructure. A big thanks to VMware to listen to the customer feedback, site Web de VMware is great product 100% customer love, you must be the leader when it comes to supporting your customers.

  

  follow this blog.

  http://www.vmwareminds.com/fix-Google-chrome-breaks-the-vSphere-Web-client-integration-plugin/

• performance of the 6.0 POS device in the web client.

  I use the unit of POS 6.0 (6 to) for about a week now. I started adding backups more & more.

  I find the very poor performance of the web client, especially when he's working on backups. In the 'Reports' section, sometimes it takes 10 to 15 minutes on "Loading of the report data" just to see failed or parties constituting the jobs.

  The installation was made with all default values, 4CPU & 10 GB of ram on the x 3650 IBM & IBM DS3500 M4 hosts attached fiber SAN. Disk performance tests all passed.

  Is this normal? The RAM can be increased, and would it be useful? It is almost unusable.

  Thank you.

  So my problem was solved after a long support call with VMWare support.

  The performance of navigation in the section of POS in the web client are now perfect.

  Call technical support and mention VDPGUIPatch.zip. This is the file that must be connected to the POS device.

  I couldn't find a page k on it... I'm sorry.

• Unable to connect via the Web client

  Dear team,

  Web customer service is installed on the SSO Server (SSO installed on seprate VM), since last year 1 it works very well, but as of today I m not able to connect through webclient get below error

  https://SSO.test.com:9443 / vsphere client / #.

  Unable to connect to the server vCenter Single Sign On https://SSO.test.COM:7444/ims/STSService? wsdl .

  Note: I am able to connect VC via vsphere client but not to Web client.

  concerning

  Mr. VMware

  After you restart the WebClient service, wait 5 minutes. Now, I m able to connect VC via the web client.

  Thanks for all the help and support.

• the Web client Setup

  Hello world

  Please forget my lame question.

  I'm running vSphere 5.1 and I use OS X on my laptop.

  I was looking for a native vSphere client, but I discovered there was no. Now, I'm trying to install the web client of vSphere according to this procedure. But when I try to download the installer of vCenter I got the following error:

  You are not allowed or are not authorized to download this product.

  Check with your My VMware Super user, Contact of procurement or the administrator.

  I am a home user and I have a free version of vSphere.

  Is it possible in this case to use the web client, or run a native app on OS X?

  Thank you!

  vSphere client of Web is used to manage vCenter server and does not support only guests.

  You can not access your ESXi server directly by using the web client of vSphere.

  If you want to run the client vSphere on OS X. check this box below the post.

  vSphere Client on Mac OS X - punching of clouds

  If you found my answer correct/good, mark the appropriate response

• The Web Client vs Tradition customer reviews

  I'm planning a vCenter 4.0 migrating to 5.1.0a.  I have a test environment 5.1.0a configuration to experiment, and so far, I like the web client.

  I was wondering what the community thought about the web client vs. the traditional client?  Do you find one faster than the other?  Y at - it of the advantages/disadvantages for each method (other vs browser install obvious software).

  Thank you

  Hello and welcome to the communities.

  For me, the flexibility of the web client is great. No matter what OS with a supported web browser can now have a vSphere Client. The thick client is endangered too, so a Dick can be too fervent about her at this stage.

• Just improved 5.0 to 6.0u2 vcenter.  How do eliminate you the web client certificate error?

  We were a vSphere 5.0 shop for many years and enjoyed the client c# 4.0, 4.1 and 5.0 then days.  We just upgraded 6.0 Update 2 this week and although always, we are primarally used to the c# client and will use it for a while to come, I am getting used to the web client for the new features that are available only in it, such as SRM and VR.

  I was able to click through the numours of screens of reminder to get via Firefox after all these certificate warnings and even easier just click the one or two things in Chrome or IE to get in.  But how could eliminate total certificate errors?  Example, now I'm with Chrome, but the https:// in the address bar is red with a slash through it.

  In most all other device based on web or connection we have, as HP iLO, Dell iDrac etc... usually, we create a CSR on this device and it present our internal Windows certificate authority and recover a file to go back to the device.  Is it possible to do this with the web client?  We have a certificate of 'Server Web 2' model that generates the sha256 return certificate and inherently all field devices to trust him because the area is important our root certificate authority.

  Also, we are running services such as replication vSphere and SRM, I would not change certificate affects only or same vSphere Update Manager.  We have two sites HQ and DR.

  I ended up getting rid of the cert errors by following this page: 6 replacement vSphere SSL certificate / implementation by using the Certificate Manager-automation tool

  I followed the procedures for "Certificate of Machine (Reverse HTTP Proxy) replace with certificate custom" and just that.  I didin 't' t mess with root VMCA with custom signature certificate certificate because its seems to me like he wanted to do an endless number of the signature of the certificate request and keys.  But the first option considered for our internal Windows CA took care of her.

  For replication of vSphere 6.1.1 that I had to turn off the virtual devices from replication via customer web vSphere vSphere and then put them back on.  Then connect to their URL of web management (port 5490) and make the reconnection to the vsphere on the connection tab, where he was invited to accept the new certificate.

  For AUVS I had to run the VMwareUpdateManagerUtility.exe under C:\Program Files (x 86) \VMware\Infrastructure\Update Manager and to the third option of re - register to vCenter, and then restart the service.

  Surprisingly, SRM sites remained paired although I've read that some people have trouble with it.  I'm on 6.0 update 2 and I think one of the questions was fixed in 6.0 Update 1 b.

• Why can't I see hosts/guests in my vCenter while I can see them in the Web Client vSphere?

  Hello

  IM new to VmWare\PowerCLI.  The goal is to get a list of VM guests in a vCenter via PowerCLI.  I can see 80 guests when I connect via the Web Client vSphere, but when I use the PowerCLI cmdlets, a Get-VMHost returns nothing.  I did the following:

  1 connect-VIServer the username-password IluvVmWare myserver.acme.com-acme\BigDog connects fine without error.

  2. $defaultviserver | Select * shows me the default connection properties.

  3 get-data center shows me 2 data centers; DC1 and DC2

  4 get-DataCenter DC1. Get-VMHost returns nothing

  5 get-VMHost returns nothing

  6 get-vmhost-Server myserver.acme.com returns nothing

  What I do wrong with PowerCLI so I can't get a dump of the hosts on the vCenter?  I can see them all in the vSphere Web Client, so permissions seem fine.

  It looks like that there.

  You must speak with the vCenter admin I guess.

  More simple would you give permissions to view read-only on the vCenter and let this authorization to spread.

  Out of curiosity, this shows the VMHostname?

  Get - VM | Select Name,@{N='VMHost'; E={$_. VMHost.Name}}

• NetApp VSC v6.1 UI is missing from the Web Client v6.0u1

  I recently updated my vCenter Server 5.5 to v6.0u1 (2k12r2 for Windows with backend SLQ 2012). With that I installed a fresh instance of Virtual Console storage NetApp v6.1. All was working perfectly until I've restarted the vCenter after about 2 weeks of operation of the new version. After you restart the gui NetApp VSC and features were missing completely on the web client. The plugin has always shown as active in the webclient service is, however, no GUI. Strangely when I try to disable the plugin from the web client, it refreshes and remains only set as active.

  In heavy client, the icon was always present, however with the new version (6.1), no functionality can be achieved through this and you are just re-directed toward the Web Client of VMware. Backups were still underway at the scheduled time, even if the plugin was not visible in the Web Client.

  I tried the following:

  The re-registration plugin

  -Stop webclient VC services, stripping any trace of com.netapp* of the VMware folder of the directory (program files and program data). Mainly located in the folder of vSphere-Client-serenity

  -Departure VC web customer service

  -Re-enrollment VSC with VC

  All the re - install

  -Stop services of VC

  -Stripping any trace of com.netapp* of the VMware folder of the directory (program files and program data)

  -Stop services VSC

  -Do a complete uninstall

  -Remove the VSC installation directory

  -Reboot server VSC to delete reg keys

  -Install the new copy of VSC 6.1

  Re-record with the VC Server

  The same question is observed. The plugin shows as being installed. The extension "com.netapp.nvpf.weblient" exists in the breast of the https://< vCenter > / mob. (see attached screenshot). The thick client still shows the plugin as permitted, as the web client. I still cannot see the interface user via the web client despite the plugin is installed and activated.

  Tear out my hair with it. Any help would be greatly appreciated.

  

  Guys,

  An update on this issue, it could be useful to resolve any other issues similar and research...

  After 4months our case eventually made its way to the development of the web client team in VMware. The problem has been identified as a corrupted file in vCenter which is responsible for organizing the status "enabled/disabled' plugins customer web. Difficulty as follows:

  "C:\ProgramData\VMware\vCenterServer\data\vSphere Web Client\SerenityDB\serenity\ALL\client.package.states.

  The solution was: -.

  • Delete the file
  • Open customer vcentre, administration, plugins
  • Disable a random plugin (this forces the State file recreate)
  • Exit vcentre and then reopen
  • Plugins should now be visible
  • Customer goto plugins and re - turn that which has been previously disabled

  Good luck guys, it was a serious pain in the ass

• Local storage shows as inactive in the web client

  Hello

  So I have a strange problem. On two of my guests, local storage shows as inactive in vCenter. I can access it without problem and there seems to be problems, but it is a bit concerning to see the alert whenever I am connected.

  

  However, when I checked in the thick client this error is not there. It is only in the web client for a reason any. I tried to restart the management agents, update storage adapters, and a new analysis of storage, but it has not changed.

  No idea what can be the cause and if it's something to worry about?

  Thank you!

  Please reboot the host and see again in the Web Client.

  BTW, what version of vSpehre for your environment?

• VUM appearing is not in the Web / Client c#

  I have a test environment in which I recently installed VUM 6.0, as well as 6 VCenter.  VUM is not displayed to each customer, and I'm at a loss at how resolve this problem at this stage.  The form of poster as recorded in the web client.

  Please go to the menu Manager of vSphere Client plug-ins, your Crossover plugin could not have been activated.

  Right-click on it and activate it.

• Single sign-on using the Web client

  Dear all,

  I improved our Vcenter server to 6.0 5.5. All right. After having access to the Web client the first time with IE11 I downloaded and installed the plugin for integration of customer. But whenever I start the web client, I can't see the link «Download the integration plugin» customer It seems that the login page does not detect the plugin of integration already installed. I checked it and the plugin for integration is really installed on the machine. It is the same when I use Firefox to access the web client. It's a machine Windows Pro 8.1

  Also the tick mark 'Use windows session authentication' is grayed out. I can connect with my windows login credentials.

  Is there a chance to fix it? I uninstalled the plugin for integration of client to version 5.5.

  Thank you

  Edy

  There are solutions to your problem, take a look at this post another: vSphere Client Web integration plugin Windows 8.1 problems

  Recently, I had this problem after upgrade a vCenter client version 6 and the solution was add the vCenter URL to the Local Intranet zone.

• VWC plugin using sdk 5.1 is broken if running on the web client 6.0 with port 9443 - out could not connect to the Web Client vSphere. Contact your administrator to resolve this problem.

  We did a vwc with sdk 5.1 plugin, now, we want to make it work on the web client 6.0. before the race, we have changed the MANIFESTO. MF and services-config. XML responses such as the following:

  2 important reminders for your plugin 5.5 is compatible with the Web Client 6.0

  After that, we deployed our plugin on web client 6.0

  If access us using the URL with port: https:// < ipaddress >: client/vsphere-9443 /? csp, our plugin arises, our plugin function is also ok.

  If access us using the URL without port: https://< ipaddress > / vsphere client /? csp, our plugin is present, the function is broken (error occurred when flex user interface by calling the java service: "Could not connect to vSphere Web Client.) Contact your administrator to resolve this problem. »).

  Thank you very much

  Please change the CHANNEL_URL in your proxy classes to use 'amf' instead of 'amfsecure '.

  private static const CHANNEL_URI:String = "/" + YOUR_MODULE.contextPath + "/messagebroker/amf"
  

  This should solve your problem.

• Unable to connect to the Web Client

  Hello

  It is impossible to connect to the Web Client. They receive the following error message:

  Error RSL # 29
  Error 2046

  We use vSphere 5.0 U3.
  

  Hello

  If please try kb article below and choose the right answer if it solves your problem.

  VMware KB: VSphere 5.0 Web Client does not load and displays the error message: Error # 2046 29 with RSL

  Thank you

  RAM