Unable to connect to the Web Client

Similar Questions

• Unable to connect via the Web client

  Dear team,

  Web customer service is installed on the SSO Server (SSO installed on seprate VM), since last year 1 it works very well, but as of today I m not able to connect through webclient get below error

  https://SSO.test.com:9443 / vsphere client / #.

  Unable to connect to the server vCenter Single Sign On https://SSO.test.COM:7444/ims/STSService? wsdl .

  Note: I am able to connect VC via vsphere client but not to Web client.

  concerning

  Mr. VMware

  After you restart the WebClient service, wait 5 minutes. Now, I m able to connect VC via the web client.

  Thanks for all the help and support.

• Unable to connect to the web services server

  Unable to connect to the web services server.  It is a common error that you might see if you try to enable web services.  If you receive this message, try the following steps.

  For Officejet printers

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds and then try to enable web services.

  For Photosmart printers

  1. Enter the printer's IP address in a browser.

  2 Select the network at the top of the page.

  3. on the left, select network.

  4. Select Network (IP) address

  5. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  6. Select apply you could get a fair warning select OK

  I hope this helps!

• Unable to connect to the web proxy/services

  Unable to connect to the web proxy/services used for officejet pro 8600 as well as using verizon fios actiontec router.  I tried wireless and ethernet.  Connectivity seems good.

  Resolved.  Port forwarding blocked by another application of verizonwebcamera problem.

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• Unable to connect to vSphere Web Client after you restart the web service from client vSphere in vCenter

  I tried my code change and restarted the service WebClient vSphere. The first time it worked but the second time I restarted the service, he stoped working: when I try to set up the web client from a browser, a pop error message appeared: "Could not connect to vSphere client to web. Contact your administrator to resolve this problem. Then the page is reloaded, but showing the same error over and over again. We run vCenter 6 with web client sdk6.

  

  In the journal of the Virgin, I found this:

  [2015 04-21 T 09: 36:00.361Z] [ERROR] http-bio-9443-exec-4 o.a.c.c.C. [.] [localhost]. [/ vsphere client]. [springServlet]         Servlet.Service () for servlet [springServlet] in the context of path [/ vsphere client] threw exception [processing request failed, the nested exception is java.lang.NullPointerException] with root cause java.lang.NullPointerException: null

  at flex.messaging.io.SerializationContext.clearThreadLocalObjects(SerializationContext.java:249)

  at org.springframework.flex.servlet.MessageBrokerHandlerAdapter.handle(MessageBrokerHandlerAdapter.java:121)

  at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:923)

  at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:852)

  at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:882)

  at org.springframework.web.servlet.FrameworkServlet.doPost(FrameworkServlet.java:789)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:755)

  at javax.servlet.http.HttpServlet.service(HttpServlet.java:848)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:303)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)

  at org.apache.tomcat.websocket.server.WsFilter.doFilter(WsFilter.java:52)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)

  to org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter (FilterChainProxy.java:330)

  at org.springframework.security.web.access.intercept.FilterSecurityInterceptor.invoke(FilterSecurityInterceptor.java:118)

  at org.springframework.security.web.access.intercept.FilterSecurityInterceptor.doFilter(FilterSecurityInterceptor.java:84)

  to org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter (FilterChainProxy.java:342)

  at org.springframework.security.web.access.ExceptionTranslationFilter.doFilter(ExceptionTranslationFilter.java:113)

  to org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter (FilterChainProxy.java:342)

  at org.springframework.security.web.session.SessionManagementFilter.doFilter(SessionManagementFilter.java:103)

  to org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter (FilterChainProxy.java:342)

  at org.springframework.security.web.authentication.AnonymousAuthenticationFilter.doFilter(AnonymousAuthenticationFilter.java:113)

  to org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter (FilterChainProxy.java:342)

  at org.springframework.security.web.authentication.rememberme.RememberMeAuthenticationFilter.doFilter(RememberMeAuthenticationFilter.java:146)

  to org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter (FilterChainProxy.java:342)

  at org.springframework.security.web.servletapi.SecurityContextHolderAwareRequestFilter.doFilter(SecurityContextHolderAwareRequestFilter.java:54)

  to org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter (FilterChainProxy.java:342)

  at org.springframework.security.web.savedrequest.RequestCacheAwareFilter.doFilter(RequestCacheAwareFilter.java:45)

  to org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter (FilterChainProxy.java:342)

  at org.springframework.security.web.authentication.AbstractAuthenticationProcessingFilter.doFilter(AbstractAuthenticationProcessingFilter.java:183)

  to org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter (FilterChainProxy.java:342)

  at org.springframework.security.web.authentication.logout.LogoutFilter.doFilter(LogoutFilter.java:105)

  to org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter (FilterChainProxy.java:342)

  at org.springframework.security.web.context.SecurityContextPersistenceFilter.doFilter(SecurityContextPersistenceFilter.java:87)

  to org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter (FilterChainProxy.java:342)

  at com.vmware.vise.security.websso.SecurityRequestWrapperFilter.doFilterInternal(SecurityRequestWrapperFilter.java:47)

  at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:76)

  to org.springframework.security.web.FilterChainProxy$ VirtualFilterChain.doFilter (FilterChainProxy.java:342)

  at org.springframework.security.web.FilterChainProxy.doFilterInternal(FilterChainProxy.java:192)

  at org.springframework.security.web.FilterChainProxy.doFilter(FilterChainProxy.java:160)

  at org.springframework.web.filter.DelegatingFilterProxy.invokeDelegate(DelegatingFilterProxy.java:346)

  at org.springframework.web.filter.DelegatingFilterProxy.doFilter(DelegatingFilterProxy.java:259)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)

  at com.vmware.vise.security.SessionManagementFilter.doFilterInternal(SessionManagementFilter.java:82)

  at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:76)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)

  at com.vmware.vsphere.client.logging.MDCLogFilter.doFilterInternal(MDCLogFilter.java:41)

  at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:76)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)

  at com.vmware.vise.extensionfw.DeploymentFilter.doFilter(DeploymentFilter.java:35)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)

  at com.vmware.vise.util.jsp.JspFilter.doFilterInternal(JspFilter.java:54)

  at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:76)

  at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:241)

  at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:208)

  at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)

  at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:122)

  at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:501)

  at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)

  at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:98)

  at org.eclipse.virgo.web.tomcat.support.ApplicationNameTrackingValve.invoke(ApplicationNameTrackingValve.java:33)

  at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:950)

  at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:116)

  at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:408)

  at org.apache.coyote.http11.AbstractHttp11Processor.process(AbstractHttp11Processor.java:1040)

  to org.apache.coyote.AbstractProtocol$ AbstractConnectionHandler.process (AbstractProtocol.java:607)

  to org.apache.tomcat.util.net.JIoEndpoint$ SocketProcessor.run (JIoEndpoint.java:313)

  at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:615)

  at java.lang.Thread.run(Thread.java:745)

  Your first mistake is:

  > [2015 04-21 T 20: 46:29.308Z] [ERROR] start-signs-2 org.springframework.flex.core.MessageBrokerFactoryBean error thrown during initialization flex.messaging.MessageException MessageBroker: cannot create class of type 'com.vmware.vise.messaging.endpoints.SecureAMFEndpoint '.

  It must be because your UI package is CLEAR. MF does not import the com.vmware.vise.messaging.endpoints package

  If that isn't it, check what is different between your plugin and a similar SDK sample

• Unable to connect to vSphere Web Client using Firefox or Chrome on the server 2012R2

  I recently installed the web client of vsphere 5.1.0 on my 2K12R2 box.  I get questions that are well known and documented when I try to connect using IE11 (but note that I can always connect to the server vCenter). So I decided to try firefox and chrome.

  With Firefox, I just get a cannot connect error message - Firefox can't establish a connection with the serere to localhost:9443.  When I try Chrome I get "this webpage is not available" with IE it came with the problem with the security certificate, but if I continue I can enter.  Other browsers are set to use the system proxy settings, so I don't ' know what is happening.

  Help!

  Thank you

  Have you tried to set the proxy to 'No Proxy' settings?

  What the system proxy settings are currently configured (netsh winhttp, see the proxy)?

  André

• Unable to connect to the Web sites security and microsoft, but internet is not working properly

  Can anyone help?
  Now, this is getting very frustrating.
  I can connect to the internet and browse most Web sites. My email works fine but I can't connect to websites www.microsoft , Norton is 'unable to connect to the Live Update server, check the internet connection' and my media center can't find my internet connection.
  What is going on?
  I have a subscription to Norton who can't find any problems. I also downloaded onecare and trojan remover, returning with a clean report.
  Please help before I go out what remains of my hair.
  What about Frank

  Hello

  You can access Microsoft.com, McAffee.com, Symatec.com? Thinking you have a conficker.

  Check with this site
  http://www.confickerworkinggroup.org/infection_test/cfeyechart.html

  Alert on the Win32/conficker virus
  http://support.Microsoft.com/kb/962007

  Protect yourself from Conficker
  http://www.Microsoft.com/security/worms/Conficker.aspx

  How to remove the worm Downadup Conficker (Uninstall Instructions)
  http://www.bleepingcomputer.com/virus-removal/remove-Downadup-Conficker

  How to manually remove the Conficker worm
  http://www.411-spyware.com/Conficker-worm-removal#how-to-remove

  BDTool to remove
  http://www.bdtools.NET/

  -----------------------------------------------

  Run the malicious Microsoft removal tool, scan with Malwarebytes, Prevx to be sure you know all the
  malware involved and if necessary use UnHackMe.

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows Update - if necessary, you can download it here.

  Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
  (Then run MRT as shown above.)

  Malicious removal tool from Microsoft
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Malwarebytes - a scanner at the request - update on the updates tab and run whenever you think malware.
  http://www.Malwarebytes.org/

  Here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  also install Prevx to be sure that it is all gone.

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------

  Also do to the General corruption of cleaning.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------

  Run Malwarebytes when you can.

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK

  Close IE

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question. (Toolbars are BHO)
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Don't forget to do:

  Logon as administrator

  Start - type in the search box-> COMMAND - find on the list above - CLICK RIGHT - RUN AS ADMIN

  Enter each of these one at a time and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset
  ------------------------------------------------------

  Here are a few rootkits if it were a question:

  SpyDLL Remover - free
  http://securityxploded.com/spydllremover.php

  Advanced Windows Service Manager
  http://securityxploded.com/winservicemanager.php

  Run the Rootkit Revealer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb897445.aspx

  UnHackme - trial
  http://www.Greatis.com/UnHackMe/

  This shows how to use UnHackme and includes a link to version 2.5 – use it as a guideline and current
  available as version above is 5.5
  http://safecomputing.umn.edu/guides/scan_unhackme.html

  IceSword - free
  http://www.AntiRootkit.com/software/IceSword.htm
  Instructions and pictorial
  http://securityxploded.com/IceSword.php
  Tutorial for use of IceSword
  http://translate.Google.com/translate?hl=en&SL=zh-CN&u=http://soft.zol.com.CN/2004/0803/145163.shtml&prev=/search%3Fq%3Dicesword%26hl%3Den%26lr%3D

  Revo Uninstaller - free
  http://www.revouninstaller.com/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• VWC plugin using sdk 5.1 is broken if running on the web client 6.0 with port 9443 - out could not connect to the Web Client vSphere. Contact your administrator to resolve this problem.

  We did a vwc with sdk 5.1 plugin, now, we want to make it work on the web client 6.0. before the race, we have changed the MANIFESTO. MF and services-config. XML responses such as the following:

  2 important reminders for your plugin 5.5 is compatible with the Web Client 6.0

  After that, we deployed our plugin on web client 6.0

  If access us using the URL with port: https:// < ipaddress >: client/vsphere-9443 /? csp, our plugin arises, our plugin function is also ok.

  If access us using the URL without port: https://< ipaddress > / vsphere client /? csp, our plugin is present, the function is broken (error occurred when flex user interface by calling the java service: "Could not connect to vSphere Web Client.) Contact your administrator to resolve this problem. »).

  Thank you very much

  Please change the CHANNEL_URL in your proxy classes to use 'amf' instead of 'amfsecure '.

  private static const CHANNEL_URI:String = "/" + YOUR_MODULE.contextPath + "/messagebroker/amf"
  

  This should solve your problem.

• Unable to connect to the web.

  I have an Inspiron One 2305. Yesterday morning, everything was fine. Before noon I couldn't connect to the web. The network connection shows that I am connected. I always get an error "unable to connect to the page. I ran anti-virus and malware. Still nothing. Do a system restore I can connect on a single page. Try to leave this page and I get the same error. Can someone give me an idea?

  At this point you can repair or reinstall Win 7. Make sure that all of your personal files are stored on a medium firstexternally.

  To do a repair, you will need your reinstall Dell Win 7 drive. Start with a hard disk check

  • Click Start > run
  • Type: chkdsk c: /f
  • Click OK
  • Accept offer to run chkdsk at the next startup, and then restart. CHKDSK runs before Windows loads. Be patient as this can take some time, depending on the size of your hard drive.

  Unlikely that chkdsk will solve the network problem, but check it anyway...

  Then run a check of Windows system (CFS) files:

  • Click Start > run
  • Type: sfc/scannow
  • Click OK
  • Insert the Dell Windows reinstallation disc, if/when requested
  • Restart when done
  • Check again networking

  If this does not help, make sure that your files are backed up! Restart, and then press F8 before Windows loads. Look for the option of repair that may be on an advanced options menu. Follow the prompts. See if that solves network problems. And don't forget to visit the Windows Update site and reinstall all updates that are missing after the repair.

• Cannot use Chrome to connect to the web client vcenter after update.

  vCenter Web Client Version 5.1.0 build 1115182

  Customer integration Plugin VMRC version 5.1.0 build 1060398

  Customer support version 5.1.0 build 832030

  Flash Player WIN 11,8,800,94

  Browser Google Chrome Version 29.0.1547.66 m

  After all components of vCenter update I am more able to use Chrome to access vCenter Web Client.  When the connection page opens, I get the following error:

  Connection error: could not connect to vSphere Web Client. Contact your administrator to resolve this problem.

  If I try to connect, I get this error:

  Provided credentials are not valid.

  Everything works fine if I use IE 10.  Someone at - it see this before and knows how to solve?

  Thank you

  Mux

  It is fixed.  I had 'Block third-party cookies' checked.  After unchecking it connected perfectly.

  Mux

• Laptop has virus and still unable to connect to the Web site after his withdrawal.

  Original title: laptop cannot connect to router

  my daughter portable computer had bankerfoxa virus I think that I got rid of but she still can't connect on the website I want to download microsoft security essential on his cell phone how if I can not connect? pls help

  Hi trinidadg,.

  Also try the following steps, you have a problem connecting to the Web sites.

  Try to do a System Restore to an earlier date when your computer was working well and try to run a scan for malware removal.

  Try to reset the Proxy settings to connect to the internet, as some malware enable proxy settings that block your ability to browse Internet sites.

  To reset the Proxy settings:

  Click Start-> in "search programs and files" type CMD-> in the programs in the list right click CMD and click 'run as administrator '.

  In the command prompt, type the following and press ENTER:

  NETSH WINHTTP RESET PROXY

  Restart the computer

  Touhami

• Unable to connect to the web interface TCS

  Hello, I'm having a problem with a TC who left the factory of S5.3 current version. I can RDP into the Windows operating system without problem and access the web page of the OS on the port 8098 management no problem, but if I try to connect to the web application interface I get a name of user and password error.  any IDE on what is causing the problem?  the server was running fine until after a reboot.  Thank you!

  Hi Patrick, http:///tcs/#page:login&rescue:true method is used for the local administrator to log in if for some reason any when LDAP authentication is configured on TCS and local users cannot connect.

  ARO

  Mahesh Adithiyha

• Unable to connect to the Web site

  I can get www.calphalon.com to load but am unable to connect. When I created the account, calphalon did exactly the same thing ebay-t - it does not recognize the security code even if it is correct. I did exactly what I do on Ebay when I ask a question to a seller - I use Internet Explorer. You have created calphalon account no problem and am able to sign in and out of my account without any problem with IE, but when I switch back to FF (updated 22), this is a go. With FF, the sign of the popup box is much too small and is completely empty. When I go to the tab of the client service to register a product (this is why I am on the site), I filled up on the sign in info on the page and the kickoff, nothing happens. It's as if I never hit the Send button. It does not seem to convey anything at all. I have signed up for newsletters, but cannot access my account on ff so it seems I'm going w/IE when I get on this site.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• Unable to connect to the Web site of 'report a problem '.

  I'm having a strange problem signing on the Web page 'Report a problem' in order to report a problem with an application that I downloaded via the iTunes store. I went to purchase in the iTunes store on my computer, click report a problem for the application in the order and he took me to a Web page called 'Report a problem' and asked me to connect.  However, I enter my information and click on connect, but the page just refreshes and doesn't connect. I know that my sign in information is correct (in addition to using it in iTunes, I just used to login here to post this question) and I came many times to just in case there was a typo in with my password.  I tried a longer password and it gave me the error "your AppleID or your password was entered incorrectly" so he is grateful to my info... I tried to clear cookies and cache from my browser (Chrome).  I also tried to use Internet Explorer and Edge to connect, but both had the same problem.  I couldn't even find a way to contact Apple on this specific problem... their support menus not occurred for problems of website that I could find at least (if someone could point me to that, I can try that as well).

  I had no problem connecting to https://reportaproblem.apple.com/ earlier. A temporary glitch perhaps?

  TT2