CPU and mother Panel upgrade - disabling necessary?

Similar Questions

• I have a ~ Windows 8 HP_ Pavillion CPU and went to upgrade to Windows Pro but now I can't Word, Publisher etc.

  After trying to update Windows 8 for Windows 8 Pro I find now that while the saved files are accessible I'm unable to access Word, Publisher etc.

  The product used to upgrade was a real bit of Microsoft64 CD.

  Looks like you could have done a custom Setup on Windows 8 Pro on your installation of Windows 8 that deleted your earlier applications such as Word and Publisher. You will have to reinstall applications from their original installation disk:

  How to install applications in Windows 8

• I'm trying to update my windows xp to vista Home premium and it says 'upgrade disabled. "

  It is a hp media center since 2003

  Hello

  You must do a clean install from XP Media Center in Vista Home Premium, depending on the year, XP Media Center (2002 or 2004, not 2003).

  "Upgrading from Windows XP to Windows Vista"

  http://Windows.Microsoft.com/en-us/Windows-Vista/upgrading-from-Windows-XP-to-Windows-Vista

  See you soon.

• HP 8000 Elite SFF CPU and graphics card upgrade

  
  

  Yes, the BIOS updates are OS independent

• HP ProBook 4445 s processor and graphics card upgrade

  Hello

  I need to have my CPU and graphics card upgraded to the requirements below please add link/s that will help me

  Processor
  I need to improve my processor 1.90 GHz to 4 GHz (at least 2.66 GHz). Then please add a link/s to this processor/s that I can use to upgrade my laptop to 2.66 GHz at least, or reach 4 Ghz.

  Video card
  I also need to improve my video card from the AMD Radeon HD 7640 G to a DirectX 11 with 2 GB of video ram (at least 1 GB of video ram). Please add link/s on what card video/s who reach the requirements I need.

  Thank you

  Here's the problem with that:

  AMD A6 - 4400M, Max 3,2 GHz / 2.7 - GHz Base, 1 MB of L2 cache, Dual-Core,.
  Graphic 35W: 7520G HD

  AMD - A8 4500 M, Max 2.8 GHz/1, 9-basis of GHz, 4 MB L2 cache, quadcore,.
  Graphic 35W: 7640G HD

  AMD - A4 - 4300M, 3.0 GHz maximum / 2.5 - GHz Base, 1 MB of L2 cache, double
  Core, graphic 35W: HD 7420 G

  Above are your graphics options for laptop. If yours is 1.9 ghz it cannot the A8, which is the best CPU and GPU option available. The video is part of the processor. There is just no way for you to improve the graphics capabilities of this laptop. It may seem like the A-6 is better because it works to 2.7 ghz, but there only 2 hearts: you have 4. And the 7520 graphics are lower than what you have. That's what you try to do? There is not too many computers that reach 4 ghz, not to mention a laptop.

• CPU and memory HotPlug

  When hotplug cpu and memory should be disabled?  Should I always use it unless I have a good reason to not do?

  Thank you!

  Have a look here for explanations on overload when hot - add default: http://www.yellow-bricks.com/2012/01/16/enabling-hot-add-by-default-cc-gabvirtualworld/

• problems with wireless after the motherboard, cpu and ram upgrade adapters

  As the title says, I have recently updated my card mother, cpu and ram (increased from Asrock extreme6 z77/i7 3770 k/Kingston 8 gb hyperx for EVGA ftw/i5 z97 4670 k/g. Skill ripjaw x 16 gb). I always use the same installation of Windows 7 64 via the same SSD. After I was installing new equipment, I used the disc that comes with the motherboard and installed all the drivers that were available (twice, just to be safe). All the features of the OS I had before seem to be there except to exit Device Manager to correctly install the drivers for my wireless (Linksys AE1000 and TP Link N900) adapters. I downloaded the current driver for the Linksys Web site and I have the disc for the TP-Link and I tried several times to install, but keep the same message ' Windows found driver software for your device, but has encountered an error trying to install it. Device Manager recognizes the device and it is not any question of State symbol (IE yellow triangle, etc.) that is displayed in conjunction with an adapter. I tried disable/re-enabling and uninstall/re-installing times and keep having the same problem. I tried to search in several forums of people with similar problems, but none of the resolutions seem to work or are suitable for my situation. Any help that can be provided would be greatly appreciated. Thank you.

  Hello

  When you upgrade your motherboard, cpu and ram, drivers for particular devices may not be related to other drivers. That's why I suggest you to install all the drivers for the chipset from the manufacturers website and see if that helps.

• HP ENVY J4W42AA: The upgrade of the power of the CPU and power

  I was looking to upgrade my cpu and my diet. I looked at the very least of suggested improvements, but I want I have different cpu can I get a new one or not. also what is the best power upgrade.

  (card mother MS-7906 or the Orchid-S )

  (power supply info

  We are not on the list, so I can't guarantee it will work. It adapts to the power outlet and is usually of the same family, so it might work.

  The difference between the 7870K and 7850B is negligible.

  http://www.CPU-world.com/compare/751/AMD_A10-Series_A10_PRO-7850B_vs_AMD_A10-Series_A10-7870K.html

  You won't be able to overclock if that's what you think. The BIOS does not, even if the K 7870 is "unlocked."

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How can I get Snipping tools im using Vista and this control panel and then enable or disable the thing pc isn't here. Help?

  How can I get Snipping tools im using Vista and this control panel and then enable or disable the thing pc isn't here. Help?

  Hello

  You don't say which edition of Vista you are using.

  Vista Home Basic Edition does not have the "snipping tool".

  If you have a different edition of Vista, read the information on how to find it:

  http://www.PCWorld.com/article/137099/activate_vistas_snipping_tool.html

  If you have one version of Vista, other than the Home Basic edition, you already have the Snipping Tool screenshot utility: click on Start, all programs, accessories, Snipping Tool. If you do not see here, it cannot be activated. Go to the Control Panel and open programs and features (you may need to click programs first). In the left pane, click Windows turn features on or off. If necessary, click continue when you are prompted by user account control. Scroll down the list of features, check the box next to Tablet PC optional components, and click OK. Marketing of these features gives you not only the Snipping Tool, but also input panel Tablet PC, Windows Journal and other features related to the stylus.

  "Install or activate the cutting tool in Windows Vista"

  http://www.mydigitallife.info/install-or-enable-Snipping-Tool-in-Windows-Vista/

  See you soon.

• Satellite A100 - 495 (PSAA9) - CPU and GPU upgrade

  Hi all

  I have a few questions.
  I have a Satellite A100-495 with 2 GB of Ram, Core2Duo 1.83 GHz (2 x; T5600) and an NVIDIA Geforce 7600go.
  I want to spend the CPU and the GPU. Is this possible?
  I don't want to do. I am looking for a store (if possible in Germany) that can do this.

  If its possible, what it costs? And what store can I speak?

  If this is not possible-> why? It is fixed; It getting too hot?

  What solution do I? I don't want to buy a new laptop.

  Kind regards
  Dave

  Update CPU and GPU on laptop computers is complicated enough or is not possible. At first, I must say that GPU is part of the motherboard and graphics card can not be upgraded at all.

  What about the CPU upgrade? Toshiba authorized service providers will not do that and the CPU upgrade is not supported. Few people on this forum have talked about CPU upgrade, but for me the risk is too high. All hardware components are adapted to the work well together and also to reduce the risk of damaging the material. The BIOS is also suitable for the specific hardware configuration. The values of the fans are also tested and there is no risk of overheating.

  Change CPU, you will get no more powerful laptop. Modern processors are powerful enough and a few MHz more won't do anymore difference. What you can do is to increase the RAM to the maximum level - 4 GB. That s all what you should do and your laptop runs a lot faster.

  Also be careful on the configuration of the operating system. This will also help make your laptop faster than before.

  By the way: for operations you need more power? What you want to do with your laptop?

• Satellite L30-134 - question about upgrade CPU and video performance

  Hi have updated my satellite l30 - 134 with a bus t2450 dual core @2 ghz 533 Mhz = cpu is runing swell-marks look nice... BUT - my video performance droped a lot - grafics 2d - to top but 3d grafics are very poor why? driver problem?
  have also 2 g ram 2 x 1 g kinmax @ 6xx runing @533

  can anyone help? see that are some similar configs on this site... then maybe you can help me
  I'll try editing a xp 64 bit (curently runing xp sp3 32-BIT)

  > I'll try editing a xp 64 bit (curently runing xp sp3 32-BIT)
  Forget that don t recommend install Win XP 64-bit.
  Why? Because the Win XP 64 bit was not so popular as Win 32 bit or Vista/Win 7 64 bit and you won't find many drivers for Win XP 64 bit.
  Stay with XP 32 bit or you can change to Win 7 64 bit.

  Regarding the graphical issue;
  Have you noticed that also using the old CPU (Intel Celeron M Processor 410)?
  If this were not the case, then I guess this could be a problem between the CPU and BIOS.
  Otherwise I would recommend upgrading the graphics card driver.

• Upgrade of Acer Aspire 5738 G CPU and RAM?

  Hello! I want to spend the CPU and the RAM of the Aspire 5738 G. The Chipset is PM45. Common current C2D [email protected] and RAM CPU is 2x2gb Kingston DDR2 PC2-6400 to 400 MHz. I'm confused because some sources claim that he cannot be upgraded

  but official intel PM45 docs say. I want to put the 8 GB of memory and if possible some cpu faster. Thanks in advance!

  PS: I found an answer here on the RAM upgrade. It is said that it can be improved with two 4 GB DDR2 modules. But what is DDR3 and CPU?

  Hello

  I found your laptop specifications:

  LX. PEX0C.015 - ASPIRE AS5738G-664G50Mn

  I also found other specifications on this one:

  1 - motherboard:

  MO. P5601.011

  BD OF THE HAND. TELL. PM45 WO / 3G (only DDR2)

  2 - memory:

  Up to 2 GB of DDR2 667 or 800 MHz memory per slot, expandable to 4 GB using two modules soDIMM.

  3-original processors:

• Change of motherboard, cpu and ram by using the version of upgrade of windows 7

  I plan on upgrading my motherboard, cpu and ram. I am using windows 7 Home premium that I have updated from xp using a retail upgrade disc that I bought from a company of national computer supplies. Should I have any problems activating this the wrench that came with the drive. I have read several posts on this but can't seem to find a definitive answer. Help, please!

  Well, Windows XP and Windows 7 are versions of upgrade as you claim, that means XP used a qualifying version of Windows that is pre-installed with the system used the upgrade of the command.

  This means, Windows XP and Windows 7 are both related to this version of Windows that came with the system. Because the copy of the original Windows supplied with the system would have been an OEM license, which means, Windows 7 and XP have more rights to transfer if you change the motherboard.

  You can always try a clean install with upgrade.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number.

  Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number. How can I activate it?

  Hi Uri,

  Please click on the link below and contact the Adobe Support via chat.

  Contact the customer service

  Hope this will help you.

  Kind regards

  Hervé Khare

• HP Pavilion G6 1356-el; CPU and card mother temperatures

  Hi, I am a happy owner of this laptop great, but I have a question: when I play videogames temperature is about 70, even 80 °, talk about the (2450 m i5) CPU and motherboard. What is normal and safe, your should I need to worry and buy a basement of fan or something? THX,

  Nicolò.

  http://www.YouTube.com/watch?v=cf5XvOWRHWU

  I like the fact that you can move the fans and it's cheaper. I also think that if one of the fans couldn't you could just buy a replacement.

  I go with this one, but keep in mind it is at an angle of permanent, so if there is a problem, this isn't for you.

  Here's the Google search I did for her. Trying to find how much noise generates.

  https://www.Google.ca/search?q=Cooler+Master+NotePal+U2&SourceID=IE7&RLS=com.Microsoft: en - us: IE-address & ie = & oe = & redir_esc = & ei = tpyXT8i7JImfiAKHq-zLDw