CQ-61-319wm (Presario CQ-61): cq-61-319wm does not SSD

Similar Questions

• Compaq Presario CQ60-420US: CD/DVD drive does not

  Hello

  CD/DVD drive on laptop does not.

  Brand: HP-Compaq Presario CQ60-420US

  Memory type: DDR2 SDRAM
  Type of socket: Socket 478

  Number of memory slots: 2
  MPN: Ports output 579000-001: Ethernet (RJ-45), SATA II
  Embedded Audio, integrated video chipset

  Device Manager: CD-ROM/DVD-ROM readers:

  (1) yellow triangle on HL-DT-ST DVDRAM GT20L ATA Device

  Status: Windows cannot start this hardware device because its

  information of configuration (in the registry) is incomplete or damaged

  (code19)

  Details: Hardware ID: first string readings.
  IDE\CdRomHL-DT-ST_DVDRAM___DCO3__

  Any help would be greatly appreciated

  @doublesix66

  Try to follow the procedure under the resolution of the subtopic-method 3: difficulty manually the registry entries corrupted on the link below to remove upper and lower filters and see if that helps the issue.

  https://support.Microsoft.com/en-us/KB/314060/en-us

  Kind regards

  DP - K

• Presario Notebook PC NV243UA #ABA CQ60419WM does not connect to the internet. Nvidia Driver problem.

  Initially, got a Nvidia 10 code.  Downloaded and installed another NVIDIA driver from a flash drive.  Restore the computer to earier time and currently says Nvidia Driver Helper Service Version 186.44.  Connection to the router is good but the computer does not see the connection.  What can I install to correct driver?  Thank you.  John

  Hello:

  I don't know why the graphics driver is not installed, but you need this driver to connect wirelessly to the internet.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&sp4ts.Oid=5060882&swItem=ob_108905_1

• Compaq Presario CQ62-a20EC does not load

  
  

  OK, the original (defective) power adapter details are:

  Pei/n: 608425-003

  -spare part: 609939-001

  The other of Presario CQ61-315EC that I used for the test is:

  Pei/n: 519329-002

  -spare part: 463958-001

  Part Locator does not contain my country (Slovakia). I played with him in selecting other nearby countries, but it has not helped me a lot. I contacted three local stores for proper AC adapter and I already bought a.

  p/n: 608425-001 - this has a different suffix as the original

  -spare part: 609939-001

  CQ62-a20EC works correctly with both above mentioned functional power supplies.

  ==

  There is another problem that appeared in fact after the update of the BIOS (F.8-> F2. (B).

  (Press F2 during POST) diagnostic-> battery test system:

  -F.8 BIOS with defective power supply = > has failed with the message "no adapter not connected" - this seems reasonable

  -BIOS f.2bs with defective power supply = > failure with "primary - replace (30)", failure id: 0GFM7R - 52T 693 - 9XL03G - C0E903 - sounds strange and I do not expect such different error after BIOS update

  -BIOS f.2bs with the new power adapter = > failure with "primary - replace (30)", failure id: 0GFM7R - 52T 699 - 9XL03G - C0E903 - please see that failure is different

• Compaq presario sr5010nx does not recognize cpu

  Hi guys my dad have a really crappy computer (cannot run the half-life 1) and I want to give him my old (also shitty, but less) which I use no more. I bought a new processor, an intel Core 2 Duo E4300 1.80 GHz 2 M 800 MHz processor LGA775 Conroe, which is on the list of caught cpu supported by the motherboard (945GCT-HM (Livermore)) on the website of intel. When I changed the cpu, apply the thermal paste and it started
  I got "ERROR: unsupported processor installed.
  PC will turn off automatically in a few seconds "message and I wonder why it does not work. Is it possible that the CPU is broken? I bought on ebay so it would not be surprising. I also changed the power supply which fried for a 550W and added the new ram, 1 stick of 1 GB and a 2 GB.
  
  P.S. I asked on another Web site and all they told me is get a better machine, please do not. My father is really not great matches and I don't have the money for her ^^

  Hello @Charlesesteban,

  I understand that you are having problems with upgrading the processor on your desktop Compaq Presario SR5010NX. Well well, according to the HP Support document: upgrade or replacement of the processor you have followed the steps correctly. The TDP for the original and intel processor Core 2 Duo E4300 1.80 GHz 2 M 800 MHz LGA775 processor are the two 65w so this isn't a problem. I suspect that you're right in that the new processor is faulty.

  I hope this helps. Thanks for posting on the HP Forums. Have a great day!

• Compaq Presario SR5123WM does not turn on

  Compaq Presario SR5123WM does not illuminate. Green light on the back is the only one that lights up. Fans don't come on. It is plugged. No lights on the keyboard or the mouse. Haven't added a new hardware or software. the fans were working and the keyboard and mouse worked, but the monitor would not come on, now nothing.

  I thank very you much for the quick response. The instructions with the videos helped. It was the power supply.

• Keyboard and trackpad which does not Compaq presario CQ60

  Help!

  My keyboard and trackpad on my Compaq Presario CQ60 laptop do not react and do not have external devices to see if it is an internal matter. Cannot restart in Mode safe as the keyboard is unresponsive, however it allows me to type my password to access vista! I think I just lock the computer, but do not know how unlock, various forums have specified relocation drivers etc, but I am unable to do this without functional keyboard and do not know how if I pressed a key combination that caused it. I don't know if it's a problem of Vista or Compaq/HP.

  Immensely from any help appreciated!

  as far as I know, if you can type your password on the login screen, then the keyboard works, if the problem appears after the connection or it will appear when you are on your desktop screen, it may be a problem of operating system or a problem with corruption of user account

  the keyboard would be a hardware failure, if when you turn on your nb, there will be no ligts on the keyboard will make the capslock key does not illuminate or does not at all as long as you turn on the nb

  for the touchpad, try to check if its or disable... If there is a light orange above the touch pad then sound off, toggle the switch the light to turn to blue...

  so before anything else... TRY THIS FIRST!

  1. remove the battery

  2 disconnect the power adapter

  3. no power supply at all, press in and hold the button for 1 min... Be sure that it will be 1 min...

  technically, we call this HARD RESET... This process would free electricity static that could be included on the power button spout these electrostatic charges sometimes causes harware malfunctionalities...

  then it this step does not work... do this...

  try to go into safe mode by continuously pressing F8 during startup (press F8 when you see the hp invent screen), then you will be directed to advance startup options... Choose last known good config... Then, it will boot to the last known good setting...

  Please let me know if this does not work...

  Otherwise, ' choose repair your computer "on the start options... Choose the American keyboard layout... so if asked for a user name and password, you can change the administrator username username and then put your password... If you do not use any password leave it blank... then choose Startup Repair...

  Please let me know if this does not work...

  I hope this helps...

• Presario CQ56 - 154CA does not load BIOS

  Hello, I have a compaq presario CQ56 - 154 mobile CA. I deleted the hard drive using DriveCleanser to True Image Home 2011 and then tried to load the recovery with F11 (or F10 or whatever it is) Manager, but now all I get is a red screen with the big Q logo with "Press ESC for boot menu" on the bottom left and it just hangs there. I wipe the Win7 and system partitions, but not the recovery partition. I did a backup of these 3 partitions on my external hard drive, but the laptop does not start from a flash drive bootable, that I did in True Image, nor any of my startup CD and I set the bios to boot from flash first, then the DVD, then drive before wiping.

  I don't have the DVD with Recovery Manager recovery in Win7, but I wouldn't need them not from the recovery partition is still there.

  I read that some Compaq portable computers use a utility on the hard drive to load the bios, boot etc menu, so if this is the case with mine, then it has been completely removed. If this is the case, is there a way I can get it on the drive?

  If this isn't the case, I could try to remove the drive and put it in an envelope outside and connect to my office. It is possible that I can use the flash drive to use True Image to restore wiped two partitions. Also, I read that in this case, remove the disc and then turn on the laptop may allow the bios load, but I'd really prefer not to take the drive if I have to.

  I have faith in your ability to help me with this, thanks!

  ...
  Get off drugs or get back at them

  I seem to have solved the problem! As soon as I was able to restore the partition of 'System', which is the partition active, the bios loaded no problem. After the release of the bios, the Recovery Manager has finally started automatically and I was able to restore the laptop to its "out-of-box" State

  What I did buy a 2 1/2 inch, SATA HARD drive, USB adapter I used to connect the player to the laptop on my desk. I used my flash boot disk image first restore the MBR on the drive by using the backup that I did. That did not work. Then I restored the system partition, crossed my fingers and pulled to the top of the laptop again and finally the Recovery Manager came. It was the most beautiful thing I've seen in days.

  A little advice. If you want to clear Win7 out of your Compaq, say you want to sell or something, and you want to use a method of multiple passes, clean partition "Win7". Don't wipe the 'HP tools', the 'system', or the 'Recovery' partitions (is there such partitions). If none of this has meaning for you, find a friend or a tech store, he does not sense of. I consider myself lucky.

  Thanks Charles for your answers, I appreciate them!

• Compaq Presario CQ71 Ser: CNF01002QT model CQ71-4142F - Dead - no power supply - does not start - no led

  Hello *. *

  First time here...

  Compaq Presario Notebook Win7 32-bit - 4 GB DDR2, aged about 3 years?

  A customer brought this with virus / malware issues - arranged.

  On start-up, the bios made regular account that the HP OEM battery must renew. Not difficult technical question here.

  Powered on the laptop without the battery and the pc has stopped completely after a few seconds.  No beeps, no LED. Suspecting power, the original showed 19.* * volts. Ok.

  Bidirectional p - s for another check the jack plug connection. No change, tried jumping jack plug connection.

  Out two-way RAM for good, no change.
  Two-way 2032 battery of the bios for good, not change.
  Removed HARD drive, no change.

  Non-powered from DC or battery, depressed and button who was held for at least a minute, without change.

  The bios battery removed for 30 minutes, without change.

  Fan do not get stuck.

  No attached devices.

  Remarkable:

  Without battery : white DC power LED stays on for about 5 seconds. And then off.

  Old battery included: white DC power LED does not illuminate.

  I did not remove the optical drive, because I think it's ok. Works fine (or used to).

  I am familiar with this series of Presario laptops / laptops and while I have tried everything I know, I was wondering if, before I have conviction as having a short-circuit motherboard / failure, is there anything else I can try with this model of HP laptop before I am progressing with the send for repair of component.

  Thanks in advance

  Nick

  Freelance technician PC technical support

  Compaq Presario CQ71 CNF01002QT / WR067EA #ABF model CQ71-4142F - Dead - no power - no Boot - no led

  With everything else has been tried, it does seem to be a hardware problem at the moment. It is more than likely isolated pay-per-view system, based on the symptoms. I'm sorry.

• Compaq presario cq57-339WM does not recognize the drive as a bootable disk recovery

  Compaq presario cq57-339WM does not recognize the drive as a boot drive recovery, I'm sorry people, I searched and I entered the job in New York as a matter of research. Operating system is 7 Home premium. Hard drive went bad, so I rplaced with new. I have had I have windows image backup, but the wizard could not find the hard drive. I ordered the HP poped the first of the two recovery disks, but the machine does not recognize the drive as a bootable disk recovery. I did factory retrieve records a large number of times on computers with different operating systems and have never seen this. TNA

  Randy Rich

  I found this on PC world. I downloaded everything I need, I hope. I tried not to build the disk again. I need some rest and sleep. Stay tuned for more develonents. Here is the link http://www.pcworld.com/article/2364269/how-to-reinstall-windows-like-a-pro.html?page=2

• system recovery does not reach 50%, presario CO61-312SA

  Presario CO ^!-312SA does not start. Click f11 to start recovery of the system that does not reach 50%. I understand that the wireless switch should be during the restore process, the wireless button will be red or blue? If it should be blue, then I can't go blue... If one red so... it is!

  I bought Windows 7 drives home premium but have no idea how do I reinstall my OS... There are 2 disks for 32-bit and 64-bit, but I can't read the sticker on my laptop to see what I need to use a disc.

  Any information you can give me on any of my questions today will be very appreciated, thank you x

  Hello

  You have a few options in my opinion please find the steps below may help you solve the problem.

  (1) Please run the hard drive & memory test and check if any part fails, you will have to replace the part. If both the test passes you can call the HP technical support to order the recovery again disc.

  Test a hard drive by using the Built in Self Test

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

  
  

• Photo cd does not appear on Presario CQ60-615DX

  My daughter put 100 pictures of our trip on a cd at Walgreens.  When I put in my computer, nothing happens.

  I also put a music cd and it does not play.  I am using windows 7 on my Presario CQ60-615DX.  Thank you.

  Hello

  First of all, to eject the drawer and gently clean the small lens with a soft material such as cotton.

  Once done, check if there is no change when you insert a disc.

  Otherwise, click on the start menu, type AutoPlay , and press ENTER.  Scroll to the bottom of this window and then click on the button "reset all default settings.  When you're finished, restart the computer and check if the drive recognize a disc.

  If she is not always recognize a disk, download and run Microsoft 'Fixit' at the following link.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Let me know

  Best regards

  DP - K

• Compaq presario cq71, sudden death, does not start

  Compaq presario cq71-140ea. was fine yesterday but this morning it will not start. It turns on, displays of compaq on the screen and then does nothing. Have you tried pressing f10 to change the sequence of boot for the relocation, but it just says bios configure options at the bottom of the screen and will not actually in it. All keys have the same effect. Says on the bottom, what is it but isn't "doing". Does anyone have any ideas on how I can him get up and running?

  Ruling on a BIOS corrupted, removing the CMOS (exhibit) just battery resets the default settings for the BIOS, but you do not have to remove the laptop battery as well. Did you remove the two batteries?

  I still really want you to try to boot the machine with a stick of memory removed.

  Here's a good video youtube, that he mentions on the battery and electric shock _ you won't electrocute yourself, the voltage inside a laptop is very low and also the battery will be removed.

  http://www.YouTube.com/watch?v=dbvmRsSh210

  Remove the stick dessu first (you don't have to replace the cover on the penalty), insert the battery back in and start. If no luck, remove the lower Strip and try this one. If it does not always start upward, then I would say that the BIOS is damaged. If it starts, then you have a bad stick of RAM.

  The RAM sticks are matched, you can't make them in trust, me it's a very simple thing to do.

  http://h20574.www2.HP.com/default.htm?lang=en&cc=us&hpappid=psml

  Also here is a link to HP multimedia Services library and some screenshots as getting there.

  

  

  When you click the link you may have to sign in again, giving the two pages of time to load, especially the other, it takes about 30 seconds.

  In the video he says you only touch the memory stick to the edges, it is a good idea, but I've seen people deal with it very casually and it's always nice. However just follow the steps in the video.

  I mention this once again and that's to make sure that you're statically discharged before opening the laptop.

  After trying the solution of the RAM (Random Access Memory) and if it fails, you will need a 1 GB flash drive. If there is something on this subject, and then save the information we have will be formatted.

  Flash player is required to save your BIOS.

  I guess we'll use your computer for girls, so I need to know what operating system is on it.

• HE commands to work - Compaq Presario SR5000 does not start

  I have a Compaq Presario SR5000 running Windows Vista Edition family basic and once we got in, I first cleaned the internals to the air compressed, then tried to start, and it failed, so recommended BIOS I run the Startup Repair tool and so I did, and the startup repair couldn't fix the computer "automatically".

  Now, I run the system restore and I tried to restore the computer to its last Windows Update, and I got the error code 0 x 80070002, meaning that the system cannot find the specified file.

  Specifications for the Compaq Presario SR5000 I have:

  AMD Sempron LE-1250 to 2.20 GHz

  2 GB PC2-6400 DDR2 SDRAM Samsung

  WDC WD3200AAJS 320 GB HDD at 3.0 Gbps

  Phoenix BIOS CMOS review 5.16 12/11/2008

  Windows Vista Home Basic

  HP M2N86 - THE mother

  Power supply PS-5251-08 LiteON 250W

  Well, if this is the case, then I think you may try to access BIOS, if that does not work then go ahead with the HARD drive option. I had this problem before and I wiped the hard and it worked eventually. If this does not work, I will try and find a different solution.

  -Steven Jacob Dallas, TX

• My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.

  When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.

  A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.

  If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us