Crash after running exe for Ad-aware personal edition

Similar Questions

• Vista crashes after using it for a few minutes and then does not start (after a few hours - it starts and again the same problem)

  I'll have this weird problem and did not find the problem. Suddenly my laptop (Lenovo Y710 - 4 GB RAM - Windows Vista Home Premium 32 bit) crashes after a few minutes of activity, Vista freezes. CTRL + Alt + Delete does not work. If I force close to the bottom and then try to restart, it do display anything. I tried to start in safe mode, but after pressing f8 and it only beeps and still doest appear anyting on screen you. If I try to start the laptop after a few hours it starts again and minutes it freezes again. I noticed this problem for the first time when using RDP to my desktop, but it wasn't the first time I've done RDP. I have not installed new hardware or drivers. Am not able to nail the question, would appreciate any help.

  Thank you.

  This is no doubt hardware failure. The laptop could be overheating and/or other components could be involved. Contact Lenovo technical support or take to a competent local computer Tech do not use a type of BigComputerStore/GeekSquad of the place.

  If you have a pretty good level of computer skills, you can test some components yourself although it is more difficult to make accurate material on a laptop computer troubleshooting.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  MS - MVP - Elephant Boy computers - don't panic!

• Windows crashes after leaving idle for 20 minutes approximately

  Hi, my windows hang after that I left it idle for about 20 minutes. It happens every time it is on idle. even when my leave the music player. I have searched the web for solutions and tried to start windows in safe mode or a boot of cleab nothing helps. I tried to run a SFC scan and it came up with several errors. What should I do now?

  Hello

  
  It seems that problem with the corrupted hard drive.
  
  I'm offering please contact the manufacturer of the system for the best assistance.

• CC of Lightroom crashing after running and/or publishing

  I just downloaded Lightroom CC and it is to crush and closing after opening.  I can see the images, I can even change a little (from 4 minutes to 25 minutes).  But then it freezes (formidable circle) and then firm - accidents / shuts down.

  I wonder if I use too old a computer - I have a macbook pro 17 "(I don't know, but I don't think that its 64-bit execution?)

  Here is the error report that appears

  Process: Adobe Lightroom [7870]

  Path: / Applications/Adobe Lightroom/Adobe Lightroom Lightroom.app/Contents/MacOS/Adobe

  ID: com.adobe.Lightroom6

  Version: Adobe Lightroom [1014445] (6.0)

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Responsible for: Adobe Lightroom [7870]

  User ID: 501

  Date/time: 2015-05-10 16:56:30.150-0600

  OS version: Mac OS X 10.10.3 (14D136)

  Report Version: 11

  Anonymous UUID: AE198B93-AB8E-720C-E588-6842685D6811

  Sleep/wake UUID: E0376083-119F-42C0-8C9F-AB9CED93ADFB

  Time since started awake: 70000 seconds

  Wake time: 68000 seconds

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_CRASH (SIGABRT)

  Exception codes: 0 x 0000000000000000, 0 x 0000000000000000

  Request for clarification:

  Abort() called

  Application of specific Signatures:

  Graphic kernel error: 0x00000002

  I REMOVED A LOT OF CODE AT THIS POINT, UNTIL IT REACHES BELOW:

  Model: MacBookPro5, 2, MBP52.008E.B05 of BootROM, 2 processors, Intel Core 2 Duo 3.06 GHz, 4 GB, MSC 1.42f4

  Graphics card: NVIDIA GeForce 9400 M, NVIDIA GeForce 9400 M, PCI, 256 MB

  Graphics card: NVIDIA GeForce 9600 M GT, GeForce 9600 M GT from NVIDIA, PCIe 512 MB

  Memory module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020

  Memory module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334548312D4346382020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.24)

  Bluetooth: Version 4.3.4f4 15601, 3 services, 26 aircraft, 1 incoming serial ports

  Network service: Airport, AirPort, en1

  Serial ATA Device: HGST HTS721010A9E630, 1 TB

  Serial ATA Device: HL-DT-ST DVD - RW GS21N

  USB device: ISight built-in

  USB device: USB Laser Mouse

  USB device: BCM2046A

  USB device: Apple keyboard / Trackpad

  USB Device: IR receiver

  Crush Bus:

  One thing to try is to disable the GPU acceleration in Lightroom preferences and see if this fixes things for you.

• Laptop crashes after loading SP2 for Vista - stuck at 0%

  I downloaded the SP2 for Vista and now my phone is blocked 3 of 3 update after reboot. It is stuck at 0% complete. How to spend it?

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Problem running streets $ travel 2007 after running fine for several months.

  I installed MS streets & trips 2007 on my new Dell w / Vista Home Premium 64 bit and it worked fine until a few days ago. Now the message "your registry settings for this application were not copied corectly. To correct these settings, run Setup again for this application from the location where you originally installed IT."is displayed. I uninstalled S & T, reinstalled, but the same thing happens. No error is indicated during the installation.

  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.streets-trips

  I advise you to ask your question in the Newsgroup S & T, dealing with these problems.

  See you soon. Mick Murphy - Microsoft partner

• In Windows 7, crashes after being idle for a few minutes

  COMP. CAME WITH VISTA HOME PRO. HDD OUT CRAPPED.  REPLACE HARD DRIVE WITH PROGRAM T1 & ADV. WITH WINDOWS 7.  INSTALATION WENT WELL. BUT COMP. A LOCKED UP AFTER SITTING A FEW MINUTES PRESENCE REPAIRS.

  Please have a read of this page - resume idle freezes. May have tips on there for you.

  Above all, make sure you have the latest OS updates as there have been updates of stability.

• Sibelius 6 educational does not run after running good for a while.

  When you run the troubleshooting (right click), it is said now that it is not compatible.  Tried to uninstall and reinstall (works on another computer, but not my main pc).

  It does not start at all.

  Hello

  Try to run the program in compatibility mode and select

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

• After running Diagnostics for error 0142 problem

  Help, please. I ran a diagnostic test and an error code 0142 came. So, I read a few o forums and found if I get my original os drive and put it in when I start the computer it would give me a prompt asking you to fix. I never had that. So I just downloaded the drive of the computer. He said then he would save all the old files and install the new os. When I did that the computer is very slow an I lost everything. Or I can't seem to find where they are. Don't know what to do. I don't care any other thing on this computer, but my photos. If the hard drive is gone or can it be fixed here?

  Thank you, Ben k

  In this case, it is a hard drive problem.

  You will need to follow the advice I've already given search you your data.

  Replace the hard drive, then reinstall the operating system.

  Have you read the information on the Dell Forums link I already suppied you with?

  http://en.community.Dell.com/support-forums/software-OS/f/3524/p/19242834/19373278.aspx#19373278

  "Kobracoach,

  Please contact Dell Community Forums.  The error code 2000-0142 means specifically that the drive hard self test failed, which means that the disk is more reliable.  You may be able to retrieve the information of the reader, but to do this, you would probably either need to take the drive to a data recovery provider (Ontrack can perform data recovery on hard drives without compromising the Dell factory warranty), or connect the drive to another computer with an external adapter and try to read data from it.  If your system is still under warranty, you can get Dell CD of the site. »

  Good luck with it.

  See you soon...

• BSOD after installing SP1 for Windows 7 Home edition

  Hello

  I use my laptop with windows 7 Home Edition that is installed on my Seagate 1 TB hard drive.  Laptop has no internal hard drive. It was working fine until recently I downloaded the service Pack 1 update from the Microsoft site and began to install it. During installation, it asked to reboot your computer and started to reboot. At this point during the boot, I met BSOD. And I'm stuck their eversince. I am not been able to start windows. Pls help me solve this problem since I was my imp project is working to complet.complete.

  * Message moved by the moderator of the appropriate forum category. Windows / Windows 7/download, install, & activate/download and install for Windows/Windows 7 / Performance & System Doctor*

  This is not a configuration supported for Windows 7 running. Windows 7 must be installed on an internal storage device. This is probably why Windows 7 SP1 fails.

• Oracle Database Personal Edition

  Hi, if I buy Oracle Database Personal Edition with a perpetual license and 1 year of support, I use the complete Meta-Link base support? If the answer is Yes, can I renew this support?

  Hi, if I buy Oracle Database Personal Edition with a perpetual license and 1 year of support, I use the complete Meta-Link base support?

  I would like to say - Yes. You can create support requests and download patches for Oracle Database Personal Edition. And you can search and read articles here.

  If the answer is Yes, can I renew this support?

  I would like to say - Yes. But you better check out representing Oracle.

• Hi, I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair o

  Hello

  I installed an Alfred Workflow (see code below) that will mark all my mails as read. After you run it for a minute, the mail has crashed and I had to forcequit. However, now, when you open the Mail it crashes instantly, even after restart and repair the permissions. I also used the Ctrl + C and CTRL-Z commands in the Terminal to leave the alfred_script, but nothing helped. I'm running out of ideas here, so I hope you could help me either reinstall the mail.app. I could always just switch to a different mail application, but it's kind of a last resort.

  Code:

  Tell application "Mail".

  Define allAccounts on each account name

  Repeat with currAccount in allAccounts

  the unreadMboxes value (each mailbox to the account currAccount the unread number is not 0)

  Repeat with currMbox in unreadMboxes

  (read status of each message to currMbox including the playback State is set to false) true value

  end repeat

  end repeat

  tell the end

  Any input would be greatly appreciated. Can post the report of crash on demand.

  Not sure that Alfred's, but it's just an Applescript script and it would not cause Mail to be planted.

  However, when running through all the messages, it is possible Mail database has been corrupted and it crashes because of this.

  I'll probably get anything out of the accident report, but others might.

  My first instinct would be to rebuild the mailbox. Because you can't do that with him crashing, you can simply delete the databases and it will rebuild them.

  Navigate to this folder:

  ~/Library/Mail/v3/MailData/

  You can either manually through the files, or copy the full path and paste it into go the folder in the menu go to the Finder.

  Remove the envelope Index files. Open Mail and see if it works well.

  If your library does not appear in your folder, hold down the Option key and select library in the menu go to in the Finder.

• iTunes 12.3.3.17 crashes after playing the song for about 30 seconds

  Hello!

  I have a problem, I'm fighting currently to solve - iTunes 12.3.3.17 iTunes crashes after playing the song for about 30 seconds.

  I already tried things:

  (1) the preferences removed from the library, so that they can be recreated - did not work;

  (2) reinstalled iTunes - not worked;

  (3) removed freshly installed Bitdefender Antivirus for Mac - did not help.

  Product: Macbook Air

  OS X El Capitan

  I receive the following information in the log file

  ===============================================================

  Crashed thread: queue main iTunes shipping 0: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0 x 0000000000000011

  Note the exception: EXC_CORPSE_NOTIFY

  Can you help me please?

  elina_j,

  It seems that your iTunes software seems to be stop unexpectedly when you play the music back after about 30 seconds or more. First, I would check to see if there are errors on the disc that need repair:

  Disk utility (El Capitan): a disc repair

  Once the repair and verification done go ahead and test the issue again. If that fixes it, then great! If this is not the case, however, I would then remove third-party plug-ins that may interfere with the operation of iTunes:

  Test with iTunes plug-ins removed.

  • Quit iTunes.
  • Mac OS X:
    • ~/Library/iTunes/iTunes Plug-ins(The "~" represents your home folder)
    • /Library/iTunes/iTunes Plug-ins
  • If all the files in this folder, move it to the desktop temporarily.
  • Open iTunes and test to see if the problem is resolved. If so, you can leave these plug-ins removed iTunes. If you want to reuse these iTunes plug-ins, check with the supplier of iTunes plug-ins to see if updates are available.

  From: iTunes: may crash when you plug in the iPhone, iPad or iPod touch

  If the problem is still there after removing the plugins or there is none to remove, then you must then create a new library, add content to it and see if the problem persists it:

  Open a different iTunes library file or create a

  Mac

  1. If iTunes is running, quit iTunes.
  2. Hold down the Option key when you open iTunes.
  3. You will see a message that says choose iTunes library. Depending on what you want to do, choose Create or choose library.
     

  Now if the problem is still not resolved then you can create a new user admin on your computer and test it there too well?

  OS X El Capitan: set up users on your Mac.

  Add a user

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on the lock icon to unlock, then enter an administrator name and password.

  3. Click on the button Add below the list of users.

  4. On the pop-up menu click new account, and then choose a user type.

  • Administrator: An administrator can add and manage other users, install applications, and change the settings. The new user that you create when you set up your Mac is an administrator. Your Mac can have multiple administrators. You can create new ones and convert standard users to administrators. Don't set up the automatic connection to an administrator. If you do, someone could simply restart your Mac and access with administrator privileges. To secure your Mac, don't share administrator names and passwords.

• Enter a display name for the new user. An account name is automatically generated. To use a different account name, enter it now, you can't change it later.

• Enter a password for the user, and then enter again to verify. Using an index of password is recommended to help the user remember the password.

• Click on create user.

The result of the new user will determine what we then so let us know how it goes! Thank you for using communities of Apple Support.

• HP Envy 15-k020us: video flickers and has red screen after running for 2 hours

  After running for 2 hours, my screen flickers then goes red.  I saw a previous announcement but this person was able to solve the problem and the answer has never been published.  I fear that the problem may be due to overheating.  Thank you.

  Hello @Jodonnell715,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are not familiar with works of the function of the Forum, private messages
  this message has instructions.

  Good luck!

• Windows vista is 63 92 updated installation and after running for seven hours must be stuck in a loop. How to regain control of my everex computer

  Windows vista is 63 92 updated installation and after running for seven hours must be stuck in a loop. How to regain control of my everex computer

  Hello

  1. have there been recent changes to the system before the show?

  2 is the issue limited to the installation of Windows updates?

  3. do you have security software installed on your system?

  Method:

  Follow the indicated link and perform the steps and check if it helps fix the problem.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note: It is strongly recommended that you back up all your personal files. For more information about how to back up your files, please visit: http://windows.microsoft.com/en-US/windows7/Back-up-your-files

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  Let us know if it helps.