Create soft is not visible.

Similar Questions

• LR5 - created subfolder is not visible

  Mac Mini OS X 10.7.5 64-bit

  LR 5 (updated)

  newbie question I'm afraid.

  So that imported images from the camera, created a folder by clicking on folder parent in the destination import Panel and selecting create the folder in the menu.  Create the new folder in the pop up dialog box and he chose.  The new subfolder is not displayed in the destination Panel. The subfolder is visible in the finder and file permissions/properties are the same as the other subfolders.

  If I click on the parent folder and select Create folder, the under is displayed in the dialog box.  If I select it instead to create another subfolder, it does not always appear in the destination Panel and an another subfolder is selected.

  I understand that this doesn't work as expected. I see the same behavior. I have never imported this way so I would have never noticed it.

  To the contrary, why not select the parent folder, check the box that says "in the subfolder:" and enter a new folder name it? It bypasses the folder OS create the dialog box that appears to have you hang up.

• Stor.E TV 2 to - the new created partition is not visible if connected to the TV

  Hello everyone, here I have a small question.

  I have acquired a store of tv Ref: PA4211E-1HLO store.tv is the old model with a 2 TB hard drive

  Here's my problem:

  I have two partitions on the hard drive.
  Then I deleted the original already installed on the hard drive partition. After I have two partitions on the hard disk with partition magic 8 all is fine, but I see partition on the computer, but when I unplug the hard drive to see on my tv but the partition on TV that he is no longer, and when I'm back on the computer, they are.

  In fact, we say that the firmware doesn't support hard drive partition, but yet I did it right

  are you a person has the same problem as me
  Thank you a lot

  Stand by. You have created the new partitions on this TV Stor.E and these partitions are recognized by the laptop's OS but are not recognized by the TV (if connected to the TV directly)

  Right?

  I think you chose standard partitions wrong as far as I know the TV Stor.E taken in charge the standard NTFS partitions to the new partitions must support this format too

• Soft keys are not visible on Simulator

  Soft keys are not visible on BB10 Simulator by clicking on textfield. It will be visible on real device

  You use the resolution of 720 x 720 in the Simulator? There are no virtual keyboard as the device has a physical keyboard. You can use your keyboard to office as input.

  To test the virtual keyboard, make sure that you start the Simulator in the fulltouch option 1280 x 768. This option is visible during the initial start of Simulator.

  Thank you

• I just started to use a new version of Illustrator and the text I've created has a pink box behind, seems to be on the depth of the normal linespace, it is not visible in outline view, only in the preview. What is this and how do I get rid of him?

  I just started to use a new version of Illustrator and the text I've created has a pink box behind, seems to be on the depth of the normal linespace, it is not visible in outline view, only in the preview. What is this and how do I get rid of him?

  A pink box indicates that the font is not installed. This is a file that you have worked before, or is this a new file?

• the user created in myrealm is not visible

  Hello
  
  I created a new user in my Kingdom. To do this, I went to user tab and group and selected new user option. I've assigned a name, description and passoword. But after that I enable button changes not has not been highlighted. so I pressed the release configuration. Now the username ADD1 is not visible on the tab of group and user. I tried to recreate the username with the same name of his name showing already in use. I use wls9.2 MP3.
  
  Help, please.
  Thank you

  On the tab..click 'user' 'customize the table' and check the 'criteria' box and make sure it is empty and then see if the user shows. If this isn't the case, then look for 'ADD1' and see if it shows them...

• EL CAPITAN - when in safari Apple toolbar is not visible

  I tried this and do not find any answer to El Capitan and NOT the FULLSCREEN MODE. When I open safari, NOT full-screen, the Apple toolbar is not visible (the one with wi - fi, Apple, file edit, history etc.). The only thing visible is the bar with red, yellow and green circles. If I click on the safari window in another program, it comes back.

  Most solutions speak to exit full screen, but I'm not in full screen - I have several open small windows (safari, word, etc.) which are all on the desktop at the same time.

  I spent hours looking for this. One solution was to repair permissions, but has no El Capitan - it is built in.

  If anyone has a solution for El Capitan, I would be very grateful.

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in the Preferenes system, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the United Nations to the Installer application or instructions to uninstall using the developer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

  If it works in safe mode, try to run this program when it is started normally, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Books in iBooks not visible in iTunes

  This problem appeared in the Yosemite and persists at El Capitan.  He is still rampant in iTunes 12.5.1.21 that just came out (September 2016).

  The books in my library iBooks may be assigned to my iDevices via iTunes.  When I boot my Mac, launch iTunes, select a device (for example, iPad) and click on books in the sidebar, I see all the books in my library, iBooks.

  However, if I close iTunes and then reopen it again books are not visible.

  It is repeatable.

  Hello Bernard,.

  Looks like your iBooks library seems to be disappearing from iTunes when you close and re open the app and it has happened for a long time. First, he need to know if this is happening to another user on your computer. Use this article to test this possibility and let us know how it works in another user:

  OS X El Capitan: set up users on your Mac.

  1. • Choose the Apple menu > System Preferences, and then click users and groups.

     • Click on the lock icon to unlock, then enter an administrator name and password.

     • Click on the button Add below the list of users.

     • On the pop-up menu click new account, and then choose a user type.

       • Administrator: An administrator can add and manage other users, install applications, and change the settings. The new user that you create when you set up your Mac is an administrator. Your Mac can have multiple administrators. You can create new ones and convert standard users to administrators. Don't set up the automatic connection to an administrator. If you do, someone could simply restart your Mac and access with administrator privileges. To secure your Mac, don't share administrator names and passwords.

     • Enter a display name for the new user. An account name is automatically generated. To use a different account name, enter it now, you can't change it later.

     • Enter a password for the user, and then enter again to verify. Using an index of password is recommended to help the user remember the password.

     • Click on create user.

  You may need to copy some of the books to the new user using iCloud drive or download your past buys iBook for testing purposes. For more information, see the following articles:

  iBooks for Mac: import books or PDF documents

  Download your latest purchases

  Sincerely.

• I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information?

  Taché product key

  Hello

  I try to install vista on my laptop but a letter of the key is not visible, all the other parts are very well including the serial code, is there another way to get the key of the other information? The laptop currently has non-OS I've tried to reinstall.

  Thank you

  Scott

  Product keys are bit-agnostic - they don't care if it's 32-bit or 64-bit.

  However, cannot legally use the recovery disk from one computer to a different constructor machine - as other licenses are not properly paid..

  There is nothing nonetheless to try all possible variations on the absence of character (there are only 25, after all the )

  Other than that, your best option is to contact the manufacturer and order a set of recovery disc for the machine. I do no download available for Vista with SP2 - but you can download Vista with SP1 and create the disc.

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

• New folder in Windows Explorer is not visible until I press refresh

  Hello!

  If I create a new folder in Windows Explorer to a network drive (which is a DFS share) under Windows 7 Professional 32 bit, the new folder is not visible until I have press F5 (refresh). Is there a fix or a solution to this problem?

  Thank you

  Kampi

  Hi kampi,.

  You can wait for a while and do not try to rush by pressing f5, because it can take a while to showup on network drive.

  To work around the problem, you can try to disable the Client of Microsoft Networks in the LAN connection properties

  a. open management of network and sharing Center.

  b. go to the Local network connection and click Properties.

  c. clear the Client for Microsoft Networks option and check.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Vista backup file is not visible

  Using the backup feature in Vista, I managed (under Vista) saved 200 + GB of my PC hard disk laptop.  I know that it worked because:

  1 - unused space on the hard drive laptop declined significantly

  2 - I was able to restore files from the portable hard drive

  HOWEVER, according to the help Windows, a file "Backup set Date" was created, but I can't - it is not visible.  How can I make it visible?

  Thank you

  Hello

  Check if the file is hidden:Show hidden files

  Backups are saved in this format: ------\Backup Set . For example, if your computer name is computer, your backup location is E, and you saved on April 2, 2006 at 16:32, that the backup occur in the value of E:\Computer\Backup 2006-02-04 163200. You would right-click the folder named Backup Set 2006-02-04 163200 to delete this backup.

  When you perform a full backup, a backup folder is created and labeled with the date of this day. When you add updates, this date remains the same, but your backup is not expired. The next time you perform a backup completes, a new backup folder is created and labeled with the date of this day, and updates are then added to that new folder. Do not remove the current backup folder.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• InvokeActionItem not visible on Z30

  Hello guys, I have developed an application that uses InvokeActionItems on the status bar to call actions such as sharing on facebook or NFC, when I applied to BFB, he rejected because these items were not visible on the bar and he just got the 'back' button, however, my application deploys perfectly Q10 and Z10. Any suggestions on this subject?

  Here's some of my code:

  InvokeActionItem {
              ActionBar.placement: ActionBarPlacement.OnBar
              title: qsTr("       Share on FB                             ")//qsTr("Post")
  
              query {
                  mimeType: "image/jpeg"
                  invokeTargetId: "Facebook"
                  invokeActionId: "bb.action.SHARE"
                  // Share an image that is packaged with the app
                  uri: _dirPaths.files + "1Meme.jpg"
              }
          }
  

  I did some research autour and unfortunately it seems that the problem is caused by a known issue with InvokeActionItem. Basically, on 10.2 If you specify an invokeTargetId it will fail, which will cause the ActionItem to not appear in the Bard of the action.

  I created this topic says follow: https://www.blackberry.com/jira/browse/BBTEN-1765

  I would still recommend a generic action (with no target specified) button. If you want a workaround solution for which specify you a target, you must create a custom class that manages it in the layer of C++, as the InvokeManager of the normal stuff still works.

• WLC 5 GHz active SSID not visible in the available networks

  We use WLC 2504 with 2 AIR-CAP2702I-D-K9Access Points. I am facing a problem of slow performance with customers active wifi (Macbook Pro). As all the clients that we use are computers laptops Macbook Pro who takes supported 802.11ac, I created a new WLAN (SSID) with Radio 802 11 a only to force all laptops to use the 5 Ghz band to check that it makes the difference. The SSID is not visible as a network available on the client if the radio SSID is set to "802. 11 a only"if it is marked to broadcast the ssid. '802.11ac' is also enabled in the network "802.11a/n/ac" categories of wireless.

  That means my Access Points do not support the 802.11ac?

  Yes, the Country is set to US which is not correct, Does it make any difference?

  As Leo does, that's the problem. Configure the appropriate country code where this access point works (appropriately by the detail of the AP, India). See below http://www.cisco.com/c/en/us/products/collateral/wireless/access-points/product_data_sheet0900aecd80537b6a.html see this post to see how you can configure https://mrncciew.com/2013/04/07/configuring-country-codes-on-wlc/ HTH Rasika * Pls note all useful responses *.

• Unallocated space is not visible in disk management

  Hello
  So I dropped my volume of the C: drive of 20480 KB, and after it decreases, it was not visible as long as the space that is not allocated. At this point, my C: disk space has fallen 20 GB, and yet the unallocated space was not visible in disk management. So, I tried to reduce it again but the same problem occurred. I tried to refresh the disk management, and unallocated space appear. I tried to restart my computer, it does not appear. Initially, I got appx. 450 GB of space on the C: drive, but now I 391,66 Go.

  The link below is a screenshot of disk management window:
  http://gyazo.com/af8c09e4e0510d4fe96c23a89041a0cf.PNG

  I have no idea what to do, so please help solve me this problem.

  -Partition management utilities-

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
  http://www.partitionwizard.com/bootable-Flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  Resizing a partition, Move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• Files not Visible in folders

  I had this problem for a while.  After a reboot, I can see my files on local, network and USB drives, but I do not see the FILES.  I can walk the tree of directories, but nothing, but folders are visible.  Usually, after a restart extra (or 2), all the files reappear.  Once I get a boot where I can see my files, as long as I do not turn off the computer or restart again, the files will be always visible during this session.

  This happened once a week or more.  During periods where the files are not visible, some of my applications are able to see the files through their menus to open the file, but some may not.  I can create any application files, but I do not see the file once they are created.  I can see all the files on my computer if I connect remotely from another computer on the network.  I checked the file attributes and they are very well

  Well today after 5 reboots, I still don't see my files.  I have a feeling that this may be permanent.  I ran Norton, Superantispyware Pro, and no virus and Malware Bytes appear.  I have a feeling that there is a file system damaged somewhere, but I don't know where to look.  It is a job with a lot of software and files over 8 million on this subject, it takes about 2 days to make a clean install so I hope to avoid this.

  Any help would be appreciated!

  PS: I just noticed now that except for the "Libraries" directory where windows Explorer opens, I see the other directories.

  Hey Tom,

  Thank you very much for your PS at the bottom of your message, which actually makes this solution fast enough if all goes well.  The libraries are not real places in fact, they are just search results.  For example, the library of Documents search both your own Document folder and the folder shared documents public and combined all the files it finds in a single view, called a library.  These libraries are XML files with the definitions of the search inside of them, and they can be damaged.

  Here's how to restore:

  1. Click each library to the left of the Windows Explorer window, then delete it.  None of your files will be deleted or altered in any way.
  2. Once they are all removed, right-click libraries section and choose "restore default libraries."