Vista backup file is not visible

Similar Questions

• error message - your backup file is not valid. It may have been deleted.

  When I start my laptop I say error message-"your backup file is not valid. It may have been deleted.' I can't select one that he tells me to do and I can't get it back, what do I do to fix this error?

  Hello

  1. what operating system is installed on your computer?

  2. what file the error refers?

  Method 1: Start in safe mode and check if it helps.

  Windows XP: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  Windows 7: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Note: make sure to start the computer in normal startup, troubleshooting is completed.

  Method2: Start the computer in a clean boot and check if it helps.

  Windows XP: http://support.microsoft.com/kb/310353

  Windows Vista and 7: http://support.microsoft.com/kb/929135

  Note: make sure to start the computer in normal startup, troubleshooting is completed.

• Error - backup file is not found or is not the file you requested.

  Original title: restoration of Windows XP utility gives "file not found error.

  Hello
  I have Windows XP SP3 on my system. I tried to restore my backup file I had created a few months back. and I get the following error:
  "Backup file is not found or is not the file you requested.
  even though I am pointing to the correct file.

  It is possible (although I'm not sure) can I have left my backup file a different location for a more current. However, in the Restore Wizard, I'm still that it points to the current file.

  I followed the instructions of Dena in the following post:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cannot-restore-files-from-computer-backup-on/4c3ac6eb-c8f5-4DB9-BA56-e158e057f828

  However, it does not help. When I try to catalog them by following the steps, an hourglass appears, but there is no algorithmic activity event. So if I move my mouse even slightly, the hourglass disappears and is replaced by the pointer. Then when I try to work with the backup file, I get the same error as above.

  Please help me with this restoration! There is a huge amount of data which suddenly went 'pfoosh' one morning. people say we should have backups for buffering against these events, but a pity that my backup doesn't even work! Help, please! I would really appreciate it.

  Thank you

  Hello

  ·         You receive a specific error with the error code: "the backup file is not found or is not the file you requested"?

  ·         Is the backup stored locally or on an external drive?

  You try to run chkdsk on the drive that contains the backup. Later, check to see if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer

• Vignette to locate some ppsx files are not visible in windows Explorer

  I have windows 7. Thumbnails for some of my .ppsx files are not visible in Windows Explorer, while the other .ppsx files are visible as thumbnails. I have attached a screenshot to show that 8 .ppsx files, 6 display their thumbnails while the 2 only.

  

  Try this option.  Open your file in PowerPoint.  Then go to the file menu.  To the right, choose Properties, and then view the advanced properties:

  

  Make sure that the image 'Save Preview' is turned on:

  

• Have a great 2009 backup file is not deleted.

  I tried to remove through the usual channels, and I have run suggestions as administrator, but everything just cannot remove this old and quite useless backup file to there are 2 computers.  There is nothing that I need because individual segment within the backup files will not open and I have not been able to find a program to open.

  I need help to remove this big enough file.
  Thank you
  jyeary3

  Start in safe mode, see if it can then be deleted.

  In the case against where the file is located and what exactly is the err msg?

• VISTA: backup application could not start due to an internal error: (0 x 80080005) Server execution failed

  The backup application could not start due to an internal error:
  Server execution failed (0 x 80080005)

  Vista Ultimate - trying to COMPLETE the backup of a computer

  Hi people,

  I had a similar problem with Vista (64-bit edition complete edition) machine. I run automatic backups for more than a year. Suddenly, backups started fail with the following error code:

  "The file or directory is corrupted and unreadable 0 x 80070570.

  I thought it would be my external drive - so I tried an another one - same error. After a search of different topics around, I tried various fixes (similar to above), but none of them worked.

  I managed to find the problem though. The issue is not with the drive being written - it's the current backup disc that is the problem. If you want to save your primary drive (C:, for example), try to perform a check of the errors on this drive (right click on your drive home, you are trying to save, choose 'Properties' then go to 'tools' - click 'Check now' under the control of errors - and check both boxes). Since this is the current drive, you must stop and restart - the system then automatically checks the system files and windows files on the next boot.

  After doing this, my problem cleared up. Apparently, the backup software was crashing trying to read a corrupted file or a sector of the hard disk, that he was backing.

• computer Vista Home network is not visible from the XP computers

  I have a home network with 4 computers. Both run Windows XP, Windows Vista is running and
  It works in Windows 7. Each group can see all the others and can access shared files and printers
  with one exception. Vista computer is not visible from the XP computers. It is visible from
  the Windows 7 computer. I guess that there is a setting somewhere on the Vista machine
  That I need to change, but I'm not.

  Thank you.

  David

  Hello

  see Help for these links if

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Setting up a network home

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Vista File and Printer Sharing

• reinstall with vista backup files

  I have a toshiba laptop satellite series I have upgraded from vista home premium to before windows 7 to do this I have backup files on dvd everything was great.  Now I reinstall vista with recovery disc, is possible to reinstall my dvd backup files.

  TKS

  jeanpro30

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Restoration of the backup files is not HD

  Microsoft window came up with message that my HD was 'BAD', and I have to back up the files and replace HD.  I chose the option to back up all the files on a flash drive.

  I have now replaced the HD and run the recovery discs.

  When I insert the flash drive it contains a file 'OWNER-PC.'

  Open this file, there is another file: "Backup Set 2010-11-01..."

  Open this file, I find: "backup files 2010-11-0.

  This file contains 19 files: "Save files 1" by "backup Files19".

  Each of these files contain files and each of them contain files.

  What is the best way to restore my files of the tree of which I guess are compressed files.

  Hello

  ·         How you back up files?

  ·         You use the backup program in Windows?

  If Yes, then you must restore the backup files to view.

  Here's how you can restore backup files: http://windows.microsoft.com/en-US/windows-vista/Restore-files-from-a-backup

  If you did the backup windows of the computer, and then follow the steps of: http://windows.microsoft.com/en-US/windows-vista/Restore-your-computer-from-a-system-image-backup

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Quicken 2008 backup file does not open

  I am trying to open a Quicken 2008 backup file to restore my date of Quicken. When I go to open the file the error is
  can not open the file, the QDF file is from a later version of Quicken. This is not a later version. I saved the file in Quicken of Quicken 2008 using Windows XP.

  If you right-click on the file and select Properties, in the general tab is there any mention of "Unlock" down at the bottom, or in the Security tab are the correct access permissions for your user access to the file?

  This will lead you to the Inuit Forum and additional help.

  Quicken community
  http://www.quickencommunity.com/

• Multitrack session: how have session reference copies of BACKUP files and not the originals?

  Hello.

  Back to the Audition 1.5, I mainly to save a session as and have it save copies of all files in the same folder as the file .its. Since getting CC of the hearing, I found the option to save files through the session export multitrack and saved the project successfully with its project files... However, I find that hearing CC is still reference the original files when I open the session rather file referencing the backup files in the folder.

  So my question is... How do I get Audition to reference CC and make use of the backup files, rather than the originals? My reason for doing this, it is simply because I have a large archive of SFX files and do not want the changes recorded in the original accidentally files. I want basically, each session to be autonomous and no risk of harming the integrity of the original files, I reuse SFX for different projects all the time.

  If I was not clear enough, please ask and I will try to explain my problem.

  Thank you.

  masarudaimon wrote:

  However, I find that hearing CC is still reference the original files when I open the session rather file referencing the backup files in the folder.

  So my question is... How do I get Audition to reference CC and make use of the backup files, rather than the originals?

  I studied this earlier today, for a different reason, and Yes, it is a bit strange - although explicable. The thing about 'Export', is normally the session expected to be open on the same computer, where it was then used. That will happen, is that the session would open on another machine, and all tracks marked as 'offline' should be linked to the hand to the copy of the file in the folder.

  Personally I don't think it's particularly useful either. The problem is that if you make a copy of the files, you also make a copy of the session file and is not really what you want here, is it? You want a modified version that does not require all the relinking etc.

  Unfortunately, I think it's 'as expected '. But, I'll put a request for the behavior to be changed, so that the .sesx export file reference saved copies, as it is much more logical to me as well as you, I think!

• Imported files LR not visible

  Need help... using lightroom CC2015.  I imported some files raw, a few days ago. Has made some changes today and exported to a subdirectory of the main files called "lively." The files are not on my hard drive that subdirectory... and now they are not visible in LR either.  I tried to re - import (not happy with it after spending 2 hours editing), and I don't see that dimmed by images with the message that they are duplicates of files already in my catalog. I rebooted and restarted everything... no difference.  Argggg! Can anyone help?

  Your originals disappeared from Lightroom? This is probably not the case. Look at your article "all photos" to see if they're really gone. The fact that it gray images on trying to import them again means they are really in your catalog. Probably just not looking in the right place. What have you selected when you originally imported for what to do with the files? Lightroom may have moved or copied to a different folder where you had them according to what you have chosen in the import dialog box. When you find them in your catalogue, control or right click on one of the images and select "Show in Finder/show in Explorer" to show you where are the files that it uses.

• Error 0x800700AA (VISTA BACKUP FILES) _

  Whenever I try to backup my files of paper on a DVD, I get the following information:
  "Required source in use - Ref. 0x800700AA.
  How can I backup my data? Someone can help me. Thank you.

  Hello Liblue ·         Have you tried to backup to another source? ·         Have you tried another DVD? First of all, make sure that the backup you are trying to create does not exceed the capacity of the DVD. Try using a different DVD and check if you have the same problem. It would be the best way to create a backup on an external hard drive. Backup and restore: frequently asked questions http://windows.microsoft.com/en-US/windows-vista/Back-up-and-restore-frequently-asked-questions thank you,.
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Clip + - music files preloaded not visible in Windows Explorer

  Hello

  just got my new Clip + 4 GB. I plugged on the Windows 7 computer in MSC mode. In Windows Explorer, I see the complete folder structure and few files in the root folder. Explorer displays as well as the used space on the CLip + is 238 MB. However, all the files look empty! I can't find any single file of the music to the player. Can someone tell me how I can find these music files?

  Thank you very much!

  The music of the sample appears only when the player is in MTP mode.  Files placed in a mode can not be seen in the other in windows Explorer. If you love music, you can make a backup of it.  It cannot be downloaded if it is accidentally deleted...

• Unable to sign in user correctly... He advised I have a temporary user and subsequently all my files are not visible!

  I recently reinstalled my computer. Everything was fine until today when I went to sign in under my user ID. It is responsible by saying that I gave me a temporary user as mine did not load successfully. He said to check the event log. I've lost everything. I can't find anything in the favourites of Documents, photos, whatever it is. I'm not too computer, but I'm doing ok. Could someone please give me an idea of what could have gone wrong and how can I fix to get back all my files again? With thanks... Helene

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.