Creating a circle clear ole

Similar Questions

• How to create a circle of multiple segment?

  Hi guys,.

  I need some advice on how to create a circle segmented as shown in the picture as an attachment. I have it as a jpg, but I want to create it in Illustrator so I could have more control over the parts. For example, while the image shows three segments, I may have to add another in the image (this is the part of a demo of process).

  Advice/help greatly appreciated.

  See you soon

  Carl

  Carl,

  You can (all circles are concentric):

  (1) create two circles, indoor and outdoor, and oppose > compound path > make.

  (2) create an auxiliary outside circle, extending outside the extreme parts to make arrows

  (3) create a tip of arrow in the center of the circles; to avoid its pointing outwards (too), you can place its Center (rather than the part which can / base) in the Center.

  (4) move a copy of the arrow by the width of the desired interval, cut to side anchors and remove the base segment (and filling) If you have a path composed of two curved segments.

  Movement 5) a copy of 4) at the top of the arrow Tip 3).

  6 move 3) 4) and 5), in position with the centre between the two circles (from the average of the rays) and turn all of them as well as the circle auxiliary so that you get all the arrows placed in the right way (120 3, 90 degrees to 4 degrees, etc.).

  (7) hide/remove the auxiliary of the circles,

  (8) hide arrowheads,

  (9) select (Ctrl / Cmd + A) and Pathfinder > divide and remove unneded parts, namely the gaps and the funny thingy in the middle.

  Now you have the parts of the circle in a simplified version since they would be without the sides of arrow sticking out (some do),.

  (10) show arrowheads, and then select each with the corresponding part of circle and Pathfinder > unit (or Add to shape area or whatever it is called in your version).

  (You can color the parts as desired in connection with 9 arrow/circle) or 10).

• Failed to create a circle using the ellipse (using CS4 on Macbook Pro 11.0.2) tool

  I'm used to be able to create a circle with tool ellipse in shift-key while dragging, long-standing method.  That is no longer works and I can not understand why.  The ellipse remains as an ellipse, regardless of what I do.  I restarted the program but that had no effect on the problem.  Any suggestions?  Thank you

  Did you get fixed report selected in the options bar?

  [EDIT]  Just noticed a typo in my last post.  'Aspect ratio' not 'aspect ratio' Doh!

• Create a circle class

  Hey guys,.

  I'm trying to do something very simple which doesn't

  I have a custom class that creates a circle:

  create package

  {

  import flash.display.Shape

  public class circle

  {

  public function circle()

  {

  var circle: Shape = new Shape();

  circle.graphics.lineStyle (5, 0, 1);

  circle.graphics.drawCircle (50,50,20);

  }

  }

  }

  And I have a main mxml file that has a button that when pushed must execute the code in the custom class costructor and add the circle on the stage:

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:WindowedApplication ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx" >

  < fx:Script >

  <! [CDATA]

  import creat.circle

  protected function createCircle_clickHandler(event:MouseEvent):void

  {

  }

  ]]>

  < / fx:Script >

  < s:Button id = "createCircle" x = "27" y = "122" width = "35" label = "Button".

  Click = "createCircle_clickHandler (event)" / >

  < / s:WindowedApplication >

  What code should go in the createCircle function to make it work? I tried creat.circle (); and it gave me the error that says: I need 1 argument in part (). That is confusing
  Someone at - it help him?
  Thank you
  Chris

  Hello

  Create your class circle as below: -.

  Class circle: -.

  package
  {
  import flash.display.Sprite;
     
  Import mx.core.UIComponent;

  SerializableAttribute public class Circle extends UIComponent
  {
  public function Circle()
  {
  var circle: Sprite = new Sprite();
             
  circle.graphics.lineStyle (5, 0, 1);
             
  circle.graphics.drawCircle (50,50,20);
  this.addChild (circle);
  }

  }
  }

  And use it in your Application as below:

  YourApplication;

  
  http://ns.Adobe.com/MXML/2009.
  xmlns:s = "library://ns.adobe.com/flex/spark".
  xmlns:MX = "library://ns.adobe.com/flex/mx" >

  
          protected function btnHandler(event:MouseEvent):void
  {
  var circle: Circle = new Circle();
  circleConatiner.addChild (circle);
  }
  ]]>
     

  
         
     
     
     
     
     
  

  with respect,

  Wallerand

• Magnetic Lasso creates a circle instead of just what I chose, why is this?

  IM using magnetic lasso in Cs6, I make my selection, and just as I finish it and click on the last box, it clears my selection and turns into a circle at random, why is - this?

  How can I stop it?

  

  Hi Mikem,

  I don't know what caused the corruption of your PS tools. However, there is a way to 'Reset' of all the tools to the factory presets that had been loaded when the program was installed.

  Try the following:

  1 Select the magnetic lasso tool.

  2. If the tool options do not appear in the upper part of the screen, go to the window menu, click "Options".

  3. just to the right of the icon of the selected tool in the menu options, is a drop down. It will be just under the menu 'Edit' at the top left.

  Activate this sequence.

  4. when the drop down menu opens, there will be a ' > ' in the upper right corner.

  Click on the ' > ' button.

  5. in the menu that opens, select "Reset Tool". It will be at halfway in the list.

  Click on 'OK '.

  Who should the tool to the factory presets when the program was installed.

  Concerning

  Sarika

• Create a circle incomplete stroke

  Please could someone advise a simple way to the following

  How to create any outline circle percentage in illustrator, mainly if the circle is empty - just a stroke and her with, i.e. a 33%, 57% or whatever

  but the circle is not complete, it would be useful for an info-graphic.

  It would be nice to put pictures behind it, so should be as said earlier, incomplete.

  See you soon,.

  Simon.

  Simon,

  If you mean less than a full circle, you can select directly one of the 4 segments and press DELETE to remove 25%; for the other angles, you can use the scissors tool or a path as described below.

  If you want the part circle to be filled, you can add straight segments of the Center to the ends of the circumference, otherwise the fact already in connection with the cut that in the solution below.

  You can click where you want to cut with the scissors tool, or you can create a straight path that goes from the Center to the circumference, turn then a copy around the center of the desired angle, then select both and Ctrl / Cmd + J to join them, then object > path > divide objects below, and then delete the unwanted path. The remaining part will take place through the partial circumference and in the Center.

• How to create a circle from the Center?

  Hello. I'm using PS CS3 and I want to create a perfect circle around the Center. How do you do that?

  I know not pressing SHIFT while dragging makes it perfectly round. I also read that pressing alt at the same time he draws in the Center, but it does not work, it just all just with the eyedropper tool. Am I missing something or is there another way to do it?

  Thank you.

  Hello

  If you click and hold the mouse pointer and press the Alt key and drag, it should work.

  In addition, once you start dragging, add the SHIFT key to constrain to a circle.

• How to create Chinese circles

  I am a novice with illustrator using CS3. I'm trying to create a Chinese circular pattern for my family reunion - see attachment. is there an easy way to do this? can I start with a pattern of right and somehow manipulate it in a circular pattern? any help would be greatly appreciated. Thank you!

  Yes. Draw a flat shape.

  

  Drag it to the Panel forms.

  Choose the model of brush, and then click OK. Then click OK in the second window.

  Now draw a circle, and then click the brush that you did in the Panel forms.

  

• How to create a circle dotted with dots whose size varies...

  In aid of Illustrator (since I need a vector for this), I need to find a way to recreate the image as an attachment. Thank you!

  

  You can use profiles of width and then spin the circle with the rotation tool

  

• Creating partition circle-shaped arch

  Hi, I was trying to recreate the image below in Illustrator, vector image, but were unsuccessful for reasons of torque.

  1st track of image but the resulting image has tried I couldn't color the white areas, or change its size for printing

  2nd tried to build a circle and insert the arches of the online tool, but as I moved through the circle, the CRA has changed its angle. In addition, I could not find a way to keep the intersection of the arches at the same distance.

  Now, I really need help to draw the image below.

  Thanks in advance for the help

  

  A semicircle (magenta) and a circle (blue)

  Mark the center of the circle with guides (actually you don't really need, but it contributes to understanding)

  

  Select the semicircle and the rotation tool

  ALT-click on the Center

  Enter the 36 ° and click on copy

  Press Cmd + D (Win Ctrl + D) until you have reached the first semicircle

  Select all, determine the race to zero and color then with the living tool, for example

  

  Expand if necessary.

• Creating a circle with 100 spaced equal, equal size shims it contains.

  I need to create a chart of "spinning wheel" 100 corners (like a camembert but does not feature camembert) with each corner the same size and spacing, but can't seem to find a process that works. Any help greatly ppreciated.

  Sheesh, it was easy to embarrisingly!

  Thank you, Monika

• Ring controls to create the visible circle

  I try to use the ring on the front panel control to specify a circle with a radius of particuly pixel, and I'd like to be able to drag the circle around different x / Y positions.  I was able to do, but the problem is, I don't see where the annular space is located on my image (the controls of the annular space do not give the corresponding circle anywhere) - there is no visual, just output text feedback in control boxes.  Otherwise, I was able to create a circle on top of my image which acts as a region of interest using the KING property on the property node.  The problem here is that I can not specify the RADIUS in pixels of the circle I draw my image above.

  So basically I want to display a circle on top of my picture showing the return on investment and I want to be able to control the radius around an area of controls.

  Jessica

  Hello, Jessica,.

  You can use the ring to convert IMAQ VI KING and the Overlay IMAQ KING VI to do this. The IMAQ convert Annulus VI takes a command input through which you can specify the RADIUS, X, Y and angles of the annulus. After that, the Overlay IMAQ KING VI will let you see the annular space displayed in the control to display the images. I hope this helps.

• Create an indicator of circle

  Hello

  I'm looking to create a circle indicator which would fill as a pie chart according to the percentage. This would be something similar to a gauge.

  See you soon

  Simply pull on the circle to draw by the VI RADIUS. Who does all the work.

• Create and extract circle them on a 2D array

  Hello

  I've tried for 2 days to get this right, but I can't solve this problem.

  

  I have a chart 2D containing random integers. I want to create a circle and extract and add all the values that are inside this circle.

  Entries:

  -2D-Array = 2D-array with random integers

  -Center of circle = coordinated table that specifies the center of the circle

  -RADIUS = is the radius of the circle in the values in the table (in the sample photo is 3)

  Output:

  -Integer = the sum of all values inside the circle

  The radius of the circle, the size of the table-2D, the 2D table values and the center of the circle are variable.

  You guys can give me any suggestions how to solve this problem? : mansurprised:

  Bravo will be given!

  
  

• Problems by performing a penrose circle - how to create infinitely cutting lines?

  Hello!

  I try to create a full color 3 segment penrose circle in Illustrator, but I'm having a problem of creation of points that get smaller and smaller when he meets another segment. I'm not the best to describe so here's what it looks like...:

  

  

  So the first image is the current state and the second, that's how I want it to look, I managed to make this article by superimposing each other but that created problems at the other end.

  If anyone can understand what my problem is and has a solution that would be beyond amazing.

  Thanks in advance,

  -Suhail

  I would like this:

  Create 3 circles and line up like this (alignment with the anchor (use of guides).

  Then rotate/duplicate make a circle around the central point of 120 ° with the roate tool

  Complete with live paint