Creating a configuration supported MSCS by using the node and sharing of majority files in VCD?

Similar Questions

• I'm trying to set up an Ad Hoc network, but there is no option for the Ad Hoc network configuration when I go into the network and sharing Center.

  I looked at how to make a point of my computer because I have a usb wireless internet device for my laptop and I tried to get an ad hoc network setup but there is NO option for the CONFIGURATION of the NETWORK AD HOC when I go to network and sharing Center... what should I do?

  original title: ad hoc isn't here...

  Hi NickBean2,

  You can refer to the following articles and see if it helps.

  Set up a computer-to-computer (ad hoc) network
  Solve problems, find wireless networks

  Hope this information is useful.

• My computer (gateway GT5404) becomes noisy when you run the windows media player, often when you use the interent and frequently when loading files/photos or download. What is a hard drive problem?

  My computer did this for about a year. It is currently 4 years with 1 GB of RAM.

  JBW

  Could be HD or thermal / fan.  I want to download cpu - z and gpu - z (both free) to check the time.

  I also get the HD of the Lim diagnostic utility and run it to check the HD

• When I create an ad hoc network on my laptop HP using Win7, I find in the 'manage wireless networks' (in the network and sharing Center)

  Hello, when I create an ad hoc network on my laptop HP using Win7,

  I can't find it in the 'manage wireless networks' (in the network and sharing Center)
  can you help me please?

  Hello

  In case there are problems with your computer or it network devices check
  with HP, their documentation online support and drivers, diagnostics, and
  Ask problems known in their forums.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ==========================================

  The routers are much easier and they don't cost much.

  These should help:

  References to Vista also apply to Windows 7.

  Set up a computer-to-computer (ad hoc) network
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad hoc networking - how the network with the funny name can make your life easier
  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

  How to build a wireless network without using a router at wide band (also Windows 7)
  http://www.hardwaresecrets.com/article/how-to-build-a-wireless-network-without-using-a-broadband-router/418

  Build a Wireless Home network without a router (also Windows 7)
  http://www.labnol.org/software/wireless-network-without-router/11494/

  How to share files and printers on your network
  http://www.hardwaresecrets.com/article/how-to-share-folders-and-printers-on-your-network/247

  -------------------------------------------------------------------------

  Other solutions include the use of these that turn your WiFi PC into a virtual router
  instead of using the ad hoc network.

  Connectify
  http://www.Connectify.me/

  Virtual router
  http://virtualrouter.codeplex.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• What approach would be best for creating a condition of display by using the DECODE function criteria?

  Hello world

  The requirement is to filter a LOV based on a date entered by the user and a condition that uses DECODE. If : update or : pSystemLinkageFunctionDate Exchange then the LOV should be updated. So, I created a VO of read-only by using SQL. But I can't create a view of criteria that uses the DECODING. What approach would be the best method to meet this requirement?

  Select

  PET.expenditure_type

  pet.start_date_active

  pet.end_date_active

  petsl.start_date_active

  petsl.end_date_active

  petsl.system_linkage_function

  Of

  pa_lookups pl

  pa_expend_typ_sys_links petsl

  pa_expenditure_types pet

  pa_system_linkages psl

  where 1 = 1

  and pet.unit_of_measure = pl.lookup_code

  and pet.expenditure_type = petsl.expenditure_type

  and petsl.system_linkage_function = psl.function

  and pl.lookup_type = 'UNIT '.

  and: pDate between nvl(pet.start_date_active,:pDate)

  and nvl(pet.end_date_active,:pDate)

  and: pDate between nvl(petsl.start_date_active,:pDate)

  and nvl(petsl.end_date_active,:pDate)

  and petsl.system_linkage_function = decode(:pSystemLinkageFunction,'L','S','E')

  James

  Hi Timo,

  ADF business components: 11.1.1.62.29

  Platform Java (TM): 1.6.0_24

  Oracle IDE: 11.1.1.6.38.62.29

  Support for version control: 11.1.1.6.38.62.29

  Thanks for the link... I'll take a look. However, the DECODING work now; I wasn't quite deep in the stack trace to find the error that turned out be related to one of the dregs.

  James

• How to create a list of button by using the names of a table

  Hi, I want to create an application that displays detailed information about something. for example, as the profile of the users. my application will read an xml response from the server that contains the list of the names of the users. How to create a list of buttons using the names and then each button that displays the name that can be pressed and displays detailed information about the name? I think that it is similar to the BBM app that displays a contact list of the user. Thank you very much

  Create a ButtonField as:

  ButtonField [] users_buttons = new ButtonField [number of users];

  Initialize the uasing dem:

  for (int i = 0; i)<>

  users_buttons [i] = new ButtonField ("user", Field.FIELD_HCENTER |) ButtonField.CONSUME_CLICK);

  Make dem clickable setchangeListener method of buttonField and Ooveride Navigation click to make a few operatoin by clicking on the specific button!

• My CS5 Illustrator (just updated) guard smoking when I either try to re - create a link, scroll through fonts, use the pipette for the selection of the color of police/or save to a new folder outside of the previously used. Even when I choose to close, he

  My CS5 Illustrator (just updated) guard smoking when I either try to re - create a link, scroll through fonts, use the pipette for the selection of the color of police/or save to a new folder outside of the previously used. Even when I choose to close, he said that it "unexpected." Really irritating - ideas?

  Your options are:

  -try to make it work (could take a few hours and may does not always work)

  -get the CS6 (has problems as well, but works a little better)

  -get CC

  -install a virtual machine with an older system (10.6 or 10.8)

  -Check if your Mac is not as new as you think and you can still run Yosemite (also has problems, but perhaps not as much)

• My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.

  My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.

  Hi chbradshaw,

  Instead of filling & signature, tool, use the text comment comment tool, KB doc option. using comments in the PDF, Adobe Acrobat DC files (keyword: Add a text comment).

  Kind regards

  Nicos

• Hi, I recently bought numbers in order to create a commercial newspaper. I'm the pen and paper. I need help to create a formula. A purchase column determines if the entry price column is subtracted from the price of output column or output subtracted

  Hi, I recently bought numbers in order to create a commercial newspaper. I'm the pen and paper. I need help to create a formula. A purchase column; Determines if the entry price column is subtracted from the price of output column (buy) or subtracted from (Sell) entry exit. Thank you for your help

  Hi B',.

  Buying and selling in column B

  Price of entry in column c.

  Exit in column D price

  Formula (and outcome) in column E

  If the column will B always contained 'Buy' or 'Sell', it works. It is default to a calculation of 'sell' if sale or has been specified.

  E2: = IF (B = "Buy", D - C, C - D)

  If you want to delay the calculation until the amounts entered in C and D, use this version:

  E2: = IF (OR (LEN (C) < 1, LEN (D) < 1,"", IF (B = "Buy", D - C, C - D) ")

  If you want to delay the calculation until all three ducks are on a line (B contains buy or sell, C and D contain both data), use this version:

  E2: = IF (OR (LEN (C) < 1, LEN (D) < 1,"", IF (B = "Buy", D - C, IF(B="Sell",C-D,) "" ")))

  Third version used in this table.

  

  Kind regards

  Barry

• I can't use the tab key to move to the next field or use the shift and tab to move to the previous field in the forms.

  After update to 7.0.1 I can't always use the tab key to move to the next field or use the shift and tab key to move to the previous field in forms. He has always worked in previous versions and it is essential for my type of work. Does anyone know of a setting to enable this? If this is not the case, can the developers of Firefox is working on this issue (please). I love Firefox but desperately need this feature to work properly. Thank you!

  No - because it works in Mode safe mode, this means an extension is probably to blame. See http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes

• How many phone numbers can be connected simultaneously, use the most and merge buttons

  How many numbers phones can be connected at the same time, use the most and fusion of the buttons after you make the first call?

  It depends on your operator.

  It's been a few years since I've really looked into it, but I think that AT & T supports up to 5 concurrent calls. I know that other major U.S. carriers support less, but I don't remember the exact numbers. I want to say that Verizon and Sprint are in charge 3 and T-Mobile supports 2, but my memory on this subject is blurred.

  Contact your operator for more information.

• the window on my computer does not return to its original size and I can't use the max and min and exit button

  my window is too far to the right and ive tried to get to the original size and it will until a certain point to the left. This leaves me unable to use the max and min and exit tabs

  Hello

  1. What is the brand and model of the computer?

  2. is it a laptop or a desktop computer?

  3. the problem occurs after leaving the game or program?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  If this happens when you leave a game, I suggest you to follow the steps mentioned in the link and check.

  Open the troubleshooter of display quality

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 2:

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Method 3:

  Step 1:

  I also suggest you to check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  You can also check if the problem persists in a clean boot state.

  Clean boot:

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 article to start the computer to a normal startup.

  Hope this helps and keep us posted.

• I used the backup and restore of the backup C on pc. Then tried to open saved files with IE and started acting weird.

  zip files

  I used the backup and restore of the backup C on pc.  Then tried to open the files saved with IE.  IE went into free fall.  ???

  I have no idea what opened the backup files when you have double-clicked, or if you will not quote you took after doing this...  However, the official way to 'Browse' the content of the backup...

  You can view the contents of your backup by opening the wizard to restore files.

  1. Open backup and restore by clicking on the button start , clicking Control Panel, clicking system and Maintenance and then click Backup and restore.

  2. Do one of the following:

     • To view your files, click Restore my files.

     • To display files all the, click on restore files for all users. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Do one of the following:

     • To browse the contents of the backup, click Browse for files or click Browse for folders.

       When you browse folders, you will not be able to see the files in a folder. To view individual files, use her browse for files option.

     • To search the contents of the backup, click search, type all or part of a file name, and then click search.

  If you back up to the top PC (VHD) integer then you mifght consider this trick:
  http://www.Petri.co.il/mounting-Vista-backups-using-Windows-complete-PC-Backup.htm

  According to the edition of Windows Vista that you have (and how useful, you will find the possibility to look at old versions of a given file and possibly restore), this could be useful to you:
  http://www.ShadowExplorer.com/
  (not a replacement of relief.)

  With regard to the rate of success vs. failure rate of backup - it is difficult to measure.  Indeed most of the people backs up incorrectly.  It's really * not * enough to set a backup and forget about it.  If you test ever that your backups work/glance to see if you are backing up the good thing - it's just not wise.  Although most people expect that it is essential that the backups were working properly (not a test, a real emergency) to be discovered.  Most individuals who report failures, unfortunately, fall into this category "when my aircraft crashed and I went to my backups - it turns out _ backup _ does not and never told me...» ».

  A question... If you manually create a ZIP file (not a backup) - can you still Explorer in it as a folder?

  To test... Create a folder on your desktop.  Copy some files into it - of different types.  I say COPY and not MOVE on the goal here - because you can just blow this folder and all that results from this folder later if it was all fair copies of things.

  Make a right click on this folder and choose "send to" and "compress (ZIP) file and give a name to the new 'folder '.  (It's really a file.)  On your desktop, you should have the original folder you created and copied some stuff in, and a new "folder" with the name you just gave.  If you open the 'new' folder - you should see the name of the folder that is still on the desktop and go to this folder, you should see the files.  You literally use Windows Vista to the 'discovery' inside a ZIP file as if it were a folder.

• Problem ejecting USB Mass Storage Device "this device is currently in use. Close any programs or windows that might be using the device, and then try again. »

  Original title: problem ejecting USB Mass Storage Device

  When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.

  Hi a. Cook,

  (1) how long have you been faced with this problem?

  (2) is limited to any specific USB device?

  This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.

  Method 1:

  (a) Download Process Explorer from the link below

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  (b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.

  (c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.

  (d) find the process and its PID (process identifier) in the following box.

  (e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.

  (f) press Ctrl + H to display the handles in the view in the lower pane.

  (g) find the file according to the drive letter and right click, choose Manage close.

  Reference:

  
  Problem ejecting USB mass storage device
  http://support.Microsoft.com/kb/555665

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 2: You can see the steps in the link below by Diana d.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71

  Method 3: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

• computer automatically opens Internet start up how can I stop this? When I would use the computer and open internet when I'm ready to use it

  computer will automatically connect to IE start up how can I stop this.

  When I would use the computer and open IE when I'm ready to use it.

  I have a ZYXEL router.

  This has happened only since I checked a pop box that says connect automatically very stupid, I know, but now can not cancel.

  help please

  Hi Tansy,

  Thanks for posting your query in Microsoft Community.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  I understand that you want to disable the open Internet Explorer at startup option.

  Method 1
  Step 1: I suggest to start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: If the problem is solved in SafeMode with networking, then I suggest to perform clean boot and remove the program that is causing the problem.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Method 2
  I suggest you run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

  See also: Stop a program from running automatically when Windows starts
  http://Windows.Microsoft.com/en-in/Windows7/stop-a-program-from-running-automatically-when-Windows-starts

  Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you