creation of DVD will not burn DVDs for movie maker projects, why?

Similar Questions

• Error when you try to open a Windows Movie Maker. MSWMM file: cannot be opened because it is not a valid windows movie maker project file

  Help! Says the file can't be flat, .mswmm file, but the program made the film.

  I used the Windows to make a film, I scanned 458 pictures, done my book of stories, etc. with music - took a month... I "published" and now when I go to open it it says ' cannot be opened because it is not a valid windows movie maker project file? But the Director did, now I can't open it to all, it has an .mswmm file extension! Help, it's a gift for my dad who is going to be 70 and I have not yet a month to make it again!

  Hi, I'm having a similar problem but have 1 idea as to why I can't open my .mswmm file. I have two xp machines running sp3, but a pro and a home edition if it matters.

  the file.mswmm I am trying to open was created on the moviemaker version 2.1.4028.0 and it still works fine on this machine. On the xp pro machine, he is Director of windows 2.1.4026.0.

  So I try to install the movie maker 28 to my other machine I have a lot of files created with the 28 I want to be able to change on the other computer.

  =============================================
  The project .mswmm file is best to use the system that created
  because it takes all the source files... Video clips, Photos, music
  files... always be available at the original location.

  Moving from one computer to another can work if you move as best
  all of the source files. When you open the .mswmm file you will see
  Xs red instead of thumbnails of the source but if you right click the red Xs
  You should be able to navigate to the new location of the files sources and re-
  establish the path.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Why my video preview will not play on Windows Movie Maker?

  I worked on a video in Windows Movie Maker, and now it will not play my preview of the video.

  More than likely one or more of your source files are not
  fully compatible with Movie Maker or the project is too
  large and/or complex for your system resources.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

  It may be interesting to try to create a small project
  and see if Movie Maker exhibits the same behavior.

  Sometimes, it can help if you are going to... Tools / Options /.
  Compatibility tab and disable all filters / OK.

  Have you tried the publication (save) project in the
  . WMV format movie to a folder on your hard drive?

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

• The downloaded songs will not import into Windows Movie Maker

  Windows Movie Maker Vista

  I downloaded 6 songs to itunes and have converted their MP3 using itunes software. Two of the six will download in movie maker, Windows Vista 64 bit and I don't understand why the other 4 wrong?

  I downloaded 6 songs to itunes and have converted their MP3 using itunes software. Two of the six will download in movie maker, Windows Vista 64 bit and I don't understand why the other 4 wrong?

  ================================================
  Might be worth trying to convert to WMA before you import into Movie Maker. Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• does not open my windows Movie Maker project!

  I worked on a project I did with a friend for hours, and I recorded and he was preparing to publish on youtube, but before I did, I tried to open my project again, and when I clicked on open, it charge at halfway, and then he said the Director of windows has stopped working I tried to open it several times and it does not work, so I made the same video again once and tried to open it, the first time that it worked, but when I opened it again, it does the same thing, so I thought it was the length, so I made the video in 2 parts, and it still does not work! can you help me please? It is very important for me and my friend!

  Windows system: vista
  Windows movie maker system: 2007-2008... I'm not sure which

  Sounds like your project .mswmm files is corrupt.
  Maybe you're trying to make the project too complex
  with too many changes, transitions and effects.

  Next time you have a project open... try to publish in
  the DV - AVI format.

  The following articles provide information about the (economy) edition
  in a film format that will play in Windows Media Player
  and can be shared.

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html it is possible that your project will be inaugurated in
  Movie Maker 2.6, but it is doubtful for Live Movie Maker.
  It would be well worth a try.

  Good luck...

• Win7 dvd & cd maker will not burn for all formats

  Windows 7 Ultimate (used to have xp, & it worked) will not burn cds & DVD for playback in standalone players. Will only play on the pc.

  The version of the audio driver is now 6.1.7601.17514

  The modem is Conexnt

  VGA driver nVidiaMotherboard is: NVIDIA

  Windows 7 Ultimate (used to have xp, & it worked) will not burn cds & DVD for playback in standalone players. Will only play on the pc.

  The version of the audio driver is now 6.1.7601.17514

  The modem is Conexnt

  VGA driver nVidiaMotherboard is: NVIDIA

  ===========================================
  Windows 7 what app do you use to burn video DVDs
  and video CD?

  Have you tried to use DVD creation in Windows 7 to burn your DVD?

  Read the following article.

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

• LOOKING FOR DVD DRIVE FIRMWARE W. 7. PRO DRIVE WILL NOT BURN

  MY OPTICAL DRIVE WILL NOT BURN OR FORMAT, IT WILL READ.  IT ALSO DESTROYED RECORDS. The M/S FIXIT TOOL DOES NOT HELP. TRY TO FIND THE FIRMWARE for a (STANDARD) OPTIARC ad - 7540a PLAYER PERSPECTIVE.  I LOWERED THE WRITE SPEED, OFF THE DRIVE AND REACTIVATED, WITHOUT SUCCESS.

  AN A6020 FUJITSU NOTEBOOK, ORIG. WITH VISTA AND UPGRADED TO WINDOWS 7 PRO.

  will follow your advice and get a USB key.       Ernie g

  Definitely recommended, and they are bootable too. :)

• Windows 7 starter edition will not burn DVD and will not format

  • My recorder DVD format player, will play and burn DVDs when I move my dvd drive to another computer running windows vista
  • It will not burn a dvd or format a dvd rw disc when it is attached to my netbook toshiba running windows starter 7

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  Engraving for Windows 7 Info

  If your computer has a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. Windows Burns discs in the active file system format or in ISO image format, depending on which disc format you choose.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.

  When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.

  A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.

  If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• TSST TS-L632 will not burn a DVD

  TSST TS-L632 will load a DVD and DVD to show, but even after trying the new firmware it will not burn. Also I tried new DVDs and I tried Opti Drive Control and it does not create a test disc. ConvertXtoDVD goes through the process to the end, but does not burn the DVD. No error message appears.

  Hi DeputydD,

  If Dell diagnostics failed, then you need to replace the DVD drive. They are fairly easy to find for your model laptop and pretty inexpensive ($25-40).

• Satellite P10: The drive will not burn DVD

  Hope someone can help me,

  I have a Toshiba Satellite P10 and have just received some photos software, burning
  But my drive will not burn DVD, I try with discs DVD - RW which must work my laptop.
  What is happening is when it comes of the burn on the part of the disk of the process he starts, but it fails.

  I tried to burn it with Nero, but even if I burn OK on any CD discs with this software it will not work on DVD discs. It's really annoying because when the burning process it fails so that it makes the DVD - RW disc seem curupt and then my drive has problems mounting the disc to try a deletion once more.

  I have the Nero log file failed
  Done if it's any help to anyone.

  A big thank you Michael.

  Hello

  What about different DVD media? Have you tested the media DVD-R or DVD + R common?
  Have you tried different brands of DVD?
  I can't give you a properly answer why the drive can't burn your DVD - RW, but to my knowledge not every media is supported by the player.
  So I think you should check different DVDs.

• I do not understand why my creation of windows DVD burn only 1% of one of my windows movie maker projects.

  Hello

  I made a video of my Windows Movie Maker project and have tried several times to burn through my Windows DVD Maker with the burning of 7% max.  After that, it gets stuck.  However, my other several attempts were a result of burning of 1% and it stuck.  I've left overnight to see if it was the capacity but the next day it is still 1%.  I did other projects without problem.  It is only with this project.  I don't understand why it won't let me if I used Windows movie maker without problem.  The video was originally in AVI, but I was able to convert a 3GP using dvdvideosoft software. Then only, I have done a project using my Windows Movie Maker.  The full minutes of this project is 90 minutes, while the DVD that I want to burn it holds 150 minutes.  Can you help me?  Tried several things and can not find the solution.  I don't know that there must be a solution.

  What or who persuaded allows you to convert AVI, which is supported by Windows, to 3GP, which is not supported by Windows?

  If you must, convert AVI to WMV format.
  Bypass Windows Movie Maker.
  Add the WMV video in Windows DVD Maker directly.
  Try to burn now.

• Does not recognize DVD in Movie maker

  I don't know how I have to save to computer or how to edit a video of 3.5 hours from me painting. I would also like to change it in advance but don't want to mess the place dvd on. I'm new on this and made a few other videos with photos, etc. on movie maker. I need a software or the plug should ins converters or mpeg... out there, any help would be appreciated.

  Will not identify DVD in Movie maker. I recorded paint me a mural using stringing older with Hi 8 tape mini. Then I copied a vhs tape and finished to burn to a dvd + r and now it will play in the drive but I can't open it in movie maker to edit it or reduce it in order to save on computer and then make a short video. Don't know?

  Jazdo

  Actually Yes, there is a video_TS and a video_RM

  =====================================
  Sorry... This will be a long answer...
   
  DVD files you need for editing in Movie Maker
  are the. VOB files. You can find them in the VIDEO_TS
  folder. Copy them to a folder on your hard drive.
  (drag/drop...copy/paste)

  First... just try to rename one of the. VOB files to
  . MPG or. AVI and see if it will matter in Movie Maker.
  If import works... drag the file to the timeline and
  Economy/publication (file / save movie file) in the .wmv
  or to the .avi format. So... re - import new movie .wmv

  Clip for editing purposes.

  (Also... you may be able to play the renowned files

  Windows Media Player... This will give you a chance
  to identify the VOB file that contains the content
  you want to change)
   
  If this does not work... rename the file back to VOB and try
  convert the .wmv file by using one of the following
  free converters:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  #1) format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  (#2) SUPER © Simplified
  Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster)

  (FWIW... it is always a good practice to create one)
  System restore point before installing new software)

  After installing the program GREAT... open...
  you will see two small circles at the top left
  corner of the screen... check the UPPER circle.

  Now... Drag/Drop your. VOB files in the current field.

  Output container... Choose wmv...

  Video scale size / no change

  Left, click the Encode button.

  Choice: A Simple Profile / OK...

  Wait...

  (FWIW... I have better luck with video if I'm not
  try to multi-task while a file is being converted)

  When the file is converted, you should find it in...
  Program Files / eRightSoft / Super / exit.

  Or... you can type... CTRL + O.. o open the Save
  Window and choose a backup folder.

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker project doesn't find or burns correctly in DVD maker overview

  I have created a Windows Movie Maker project, composed of many avi files (129 min) and I can see the entire project in Movie Maker, but when I go to burn a DVD in DVD maker I can only listen to excerpts from the first minutes 33 and the rest is a black screen with no audio (as if there's nothing there). Also when I burn a DVD only burn the first 33 min.  I tried to publish the project to my computer in WMV format, but I get an error when I try to open in DVD creation that the file is not indexed and cannot be opened in creation of DVD. I tried to uncheck the vidoe filters and that has not worked.  Help, please. I put many hours of work into this and am very frustrated.

  The file is too large and complex. The best would be to create
  several small projects... To each post in the. WMV or. DV - AVI
  format in a folder on your hard drive. Then you can import the collection
  video files in DVD Maker and each clip becomes a scene
  (Chapter) on the DVD. (You can have up to 18 scenes).

  The following links explain how to post:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  The following chart shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  Also... for a project for more than two hours... There is a possibility that
  You may need to use a DVD Double layer...

  Good luck...

• Creation of dvd Windows Movie

  I own a canon ixus 120 is, I'm trying to burn a movie to creating windows on a dvd - rw disc dvd movie, allows you to record still images on ok, but when I try to burn movie I get message "one or more of the files that have been added in movie maker impossible dvd decoded correctly. Make sure you have decoding software installed on your computer that can decode files different "I installed the disk supplied with the camera ver51.0 and using vista.

  Hi brianholl,

  1. what type of file you want to burn?
   
  Make sure that the video you are trying to burn are not damaged. To see whether the videos you want to burn is corrupted, try playing or viewing with Windows Media Player. If the files do not play with the player, Windows DVD Maker cannot burn.
   
  The error message says to install the software for decoding on the computer in order to successfully burn the video DVD with movie maker. We recommend that you browse the disc that came with the camera to the cross check if there is no software to install.
   
  See problems with creating a DVD-video using Windows DVD creation

  Kind regards
  Syed
  Answers from Microsoft supports the engineer.