Select the appropriate boot device

Similar Questions

• Member of the Raid 'Select the appropriate boot device' "free".

  Hello

  This morning I started my first CS5 computer and got this message (see screen capture): "Reboot and select proper... boot device." »

  I checked my raid settings.  All seem to find and in good health.  See the attached screenshots.

  I see that under Raid set information, it says ' #000 Raid set: 4/4 disks: Normal.

  I see no error in the newspaper

  And I see that Member Raid value '5' is listed as 'free '.  (see screen capture)

  BTW, I see in one of my Asus configuration screens than Sata 1-6 not "detected", but, if I remember, it's normal since I use an Areca ARC-1680 d-IX 12 - ports SAS RAID

  I guess I have to do repairs on my raid.   But I think that this has nothing to do with the raid, since the raid seems to be 'healthy' and no errors in the log of the raid.  BTW, according to my notes, I have a "Raid 3"

  Any suggestions?

  Thank you

  Rowby

  Rowby,

  On my system, which also has an Areca controller, but a Gigabyte motherboard, if the "boot" order gets reconfigured by the system BIOS, that it will not start.

  Assuming that your Asus has something similar, make sure your Areca is at the top of the list.

  Jim

• computer not boot vista windows after moving it __error message: reboot and select the right Boot device.___or Insert Boot Media in selected Boot device and pressed key__

  My computer worked fine Windows Vista Home Premium. I stop him, he moved to another room, reconected everything and now it won't start. I just got this message:

  First: Hardware Monitor with a lot of temperature and tensions etc.

  Then: Reboot and select proper boot device.

  or insert media in selected Boot device key start and pressed

  You will probably have to open the computer case and check the cable from hard drive, graphics card, RAM, etc., to make sure everything is neat and tight fitting.

  Remove cards, and then reinstall them using to ensure that they are properly installed.

  See you soon.

  Mick Murphy - Microsoft partner

• Virtual machines Windows display "reboot and select the proper boot device or insert boot media in selected boot device.

  I downloaded the VM Windows and created a machine. The machine should start with ' Microsoft Corporation PXE Boot Agent v2.00 (built-in BIOS) (C) Copyright 2008 Microsoft Corporation all rights reserved.»

  "CLIENT MAC ADDR: 00 03 FF 8 1 C 2 C GUID: 2FA ' and more digits"DHCP. "... "with a spinny beside the points thing. After awhile, the... won't have a message "no boot file received" or "any offer DHCP or proxyDHCP was received" with a "reboot and device or insert boot media select start suitable for the selected boot device". What should I do? It also appears on other virtual machines. I tried pressing tools and clicking on install the built-in components, but nothing happens!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

• system crashed, I need to select the first boot device in the boot menu...

  my computer crashed and has a black screen I have reboot by pressing F8 and then to the start menu

  What now?  Press and hold f8 at startup takes me the blue screen with 3 options 1) esc = boot menu 2) f10 = set up 3) f11 = system restore.  I don't have a disk to restore the system or boot disk.  What should I do

  +

  Hello, thank you for using the Microsoft forums!

  What happened when you "press f8 and went into the start menu. ?  You should have seen the inscription as:

  'safe mode', "safe mode with networking", "last known good", etc. etc.  In these situations, it depends on what the computer or the user was doing when the computer crashed, what the line of resolution would result. Just from the top, select Safe mode and try to start.  If windows starts, there are probably a problem with drivers not loaded through a secure boot which only loads the windows drivers of base needed for windows open and run in a limited mode. While in safe mode, we will offer you the choice to use the SYSTEM RESTORE to restore your computer to an earlier point in time where everything worked well. In unknown situations, when I'm in front of a computer when you know not what caused the accident, I take a point of restoring older and not the most recent one, preferably a machine made on its own schedule, not a constraint by a device or driver installation. Note that a SafeMode restore is not generally reversible, i.e. canoe must be cancelled at the point before the restoration (in this case, the condition has crashed), yet other points before and after can be subsequently used.

  Once you have done this, or even before, if you would not rather try this again, you can use Event Viewer to try to find out what happened before the crash. Check the system and application logs, for the latest entries and repost here about this if you need help with the content of the newspapers, and we will try to help you. Alternatively, if you get it running, then you can visit this site to help you with additional questions. This is the new, free and fully automated from MICROSOFT support portal, and it can help you with most of the problems windows with a few mouse clicks.

  http://support.Microsoft.com/FixIt/default.aspx

  "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! "I"DON'T"WINDOWS...". »

• In Safari, I get the error code BSO D 0 X 80060402, error code Windows defender in the available boot device. He told me to contact Microsoft certified technicians. I do not use Microsoft or windows.

  In Safari, I get the error code BSOD 0 X 80060402, error code Windows defender in the available boot device. He told me to contact Microsoft certified technicians. I do not use Microsoft or windows.

  You have utilities installed on the computer antivirus, cleanup, or other third party maintenance?

• Not found on the computer boot device 250 hp laptop

  Hi, I have problems with starting my laptop. When I turn it on it comes up with the found boot device, please install an operating system on your hard drive, hard drive (3F0), F2 system diagnostics. Any ideas why this happens?

  Hello

  If you have the copy of the invoice, you can contact HP Support on the phone and get the security number set. Also since the disk HARD is not get in the BIOS. Once the question of the guarantee is fixed, you can ask them the HARD drive replacement.

  http://WWW8.HP.com/us/en/contact-HP/support.html

• When I try to power to the top of our Dell computer, we get a black screen and the message "boot device available. Press button to try again. »

  Pressing enter does nothing, then it usually starts by pressing "ctrl-alt-delete."  The computer runs VERY slowly.  We have Windows XP and also just downloaded Safe Eyes software McAfee, but it was slow & have start questions for a while.  My son also downloads a lot of PS3 games, etc.  Who would have something to do with it so slow?  Is there something we can do to clean it ourselves instead of redoing it to Best Buy and pay $100?

  Hello

  Start are what problems you referring?

  Method 1: May be that the hard drive is not detected. Boot to the Bios Setup and make sure that the first boot device is defined as hard drive and also make sure that save you the settings and check what is happening.

  If your computer is not configured to boot from a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions. For assistance, contact the manufacturer of your computer.

  Warning of the BIOS:

  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Method 2: If you are able to boot to the desktop then try to perform the clean boot on the computer to resolve the performance issue.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on Startand then click run.

  2. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  3. click on the general tab, click Normal startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  The following articles could be useful.

  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• Restart, and then select the appropriate emergency start device

  Hello guys

  I need help

  Here's what happens:

  I was surfing on the internet and then suddenly I heard a ticking sound coming from somewhere near the hardrive so I took off my computer cause laptop (asus 1000HE) I freaked out. Its my first time to hear the ticking. I turned on my laptop and then a message "reboot and select proper boot device." Or insert boot media in selected boot device and press a key. "When I read the message I thought that my hardrive is maybe damaged. I asked my friend, and yes it says its corrupt. He said that I had to format my laptop, but I had a few important files there. I found a few solutions in google and youtube, I can't explain it clearly, but what their practice is really different. I tried to follow their instructions, but when I get to the start part things get complicated. Priority widget does not work. I'm really new to this.

  If my story is confusing, please comment below.

  How can I recover my files if formatting is necessary

  DON'T

  Fabric is more indicative of a real hardware problem as a hard drive failed.  I would try to boot from win 7 dvd and see if you can do a repair installation.  If you take the BACKUP OS NOW and then go to the preparer Hd download their utility check HD and run it.

  If you are unable to start win 7 dvd your options are extremely limited

• Hi, install SSD on Acer Aspire VN7 - 591 G-70RT and setting for the primary boot device?

  Hello

  I have an Acer Aspire VN7 - 591 G-70RT that came with a Western Digital blue 5400 RPM HARD drive which is limitation of my performance of laptops. I contacted Acer recently to ask for upgrades that might be made and they confirmed that I could build an SSD 256 GB and up to 16 GB of ram.

  I bought an SSD now and install, but I wanted to ask how I could continue on the definition of the SSD as my main drive.

  At this point, I guess I could install the SSD, then select it as primary boot device in the BIOS by pressing F2, and then install windows 10 via my USB. If this should be good to reboot or the existence of windows on my current HARD drive causes a conflict?

  Thank you

  I have the device works now and here's what I did.

  WEAR AN ANTI STATIC BAND:

  Step 1) remove all the screws on the underside of the laptop

  Step 2) use spudger or credit GENTLY lift a gap between the keyboard and the base, then use the credit card to slide slowly into the space to jump open clips, NOT FORCE.

  Step 3) (OPTIONAL) remove the keyboard connectors by moving clip and gently remove the cable from the Jack. However the HARD drive slipped in for me without necessary to detach.

  Step 4) unplug original WD HDD blue reversing the clip and disconnect the cable

  Step 5) close laptop together and boot with Windows 10 USB install

  Step 6) install windows on new SSD (for me windows automatically activated via the BIOS/UEFI) if it doesn't happen for you, simply re-attatch the original HARD disk.

  Step 7) if the activation is successful, again set HARD drive and original format. I have kept all the original ACER RECOVERY and Partitions (Healthy) in case I need to restore factory default, but formatted primary partition.

• Select the audio recording device

  I have inspiron 1501 (a new replacement), with 32-bit amd anthlon, windows vista OS.

  My micro phone volume was very low, the person on the voice chat could not hear it. I tried to make it work properly, by mistake, I disabled the device for registration of the properties. now I don't know how to re - activate again. It gives the message that no audio device is installed. I think by the upgrade of a link to forums to dell than the old problem will be over, but I do not know where to install the audio recording device. I tried the installation of equipment as well, but did not work.

  laasa.

  
  

• In the BIOS boot device options

  Hello

  I want to use my USB to be bootable since my laptop Winxdows XP.  When I go to the BIOS to change the settings,

  the Boot Options available are:

  Startup CD-ROM (ENABLE)

  Boot disk (ENABLE)

  (DISABLE) internal network card boot

  BOOT ORDER

  USB disk on key

  USB floppy drive

  CD-ROM ATAPI CD/DVD drive

  Portable hard drive

  USB hard drive

  Network card

  Please indicate which of these Boot Options should I 'ACTIVATE' and

  that the boot ORDER should I choose to be at the top: -.

  1. If I want to boot from my USB key USB

  2. If I want to boot my Portable external hard drive

  3. If I want to boot from my CD/DVD Rom

  4. If I want to boot from my laptop

  The "boot" of Word to say 'start' in language computer, right?

  So if I chose to boot from my USB key, my laptop cannot start to load Windows XP because it normal would be more until I go back to the BIOS to change the setting?

  Why cannot it not auto answer to the user's choice to start the Windows?

  BTW, what does "Starting the internal network card" means?

  Please notify.

  Thank you

  glemel

  To see if you can boot from a USB key, you must go into your BIOS and look at the boot order.  If you see "USB stick" in the list, then you can probably - but it should be placed in the order before the drive hard to make it work.

  If you want a boot disc/USB drive for repair purposes, I highly recommend the free Hirens Boot CD.  This CD comes with a bunch of diagnosis and repair integrated tools.  If you can't fix it with this CD, it cannot be fixed without having to reinstall Windows.  Of course, this is not Microsoft.

  Download Hirens: <> http://www.hirensbootcd.org/download/ >
  Don't be fooled by the fake download links.  The correct link is a file .zip downstairs in a light green rectangle with a drive icon.

  There are instructions to create a Bootable CD and bootable USB Thumbdrive:
  Hirens CD Burn: <> http://www.hirensbootcd.org/burning/ >
  Hirens USB Flashdrive Burn: <> http://www.hirensbootcd.org/usb-booting/ >

  HTH,
  JW

• By selecting the appropriate parameters for a new project

  I'm about to start my first project with Premiere Elements and the final result for the project be must be a H264 or "WMV" file that can be uploaded to an FTP site.  It will also be displayed in front of a group on a screen (size is 7.5 ' x 10'.)

  What is the most optimal project settings that I use when I start the new project?  Something in the AVCHD category?  (With the help of NTSC).

  Thank you!

  (Sorry... This is a repost... I accidentally sent in the PS forum at the beginning).

  With the Audio and still Images ONLY, you can go with 1920 x 1080, full HD at 30 fps (NTSC) or 25 FPS (PAL), depending on where you live.

  For images, I'd like to see this ARTICLE. Note: it was written when SD was the norm, but as HD took over, sizes have been faced to understand this, as well.

  Images of PowerPoint may be problematic, but recent versions of the program can export slides as TIFF Images. I would like to keep as much of the material as possible in PSD native Photoshop, PNG or TIFF. Unless you start with formats JPEG, I would not save Images in JPEG, to keep this stage of compression on the mixture. Many have found with PowerPoint slides, they are better off starting from scratch and those in Photoshop or Illustrator maybe build. If you go with Illustrator or similar vector Art program, I would import into Photoshop and not the pixelation, rather than import the Images of AI in pre and use it for the pixelation.

  If you have any music (the narration must be PCM/WAV at first), I have that converting to PCM/WAV, if IE MP3.

  Good luck

  Hunt

• PXE e61 pxe m0f error no boot device

  Hello, I just formatted my acer travelmate p253 and when I put the boot order to boot from the disk and rebooted I got the error saying
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Brodcom PXE ROM
  No boot device - insert boot disk and press any key

  And I have tried every thing ro get my laptop to work I removed the hard drive and it return set the inserted default bios disk win 7 and set the boot order, insert a usb key with 8.1 victory in drive and set the boot order.

  Nothing

  So now, I turn to the acer community for help.

  When you start with your installation DVD or USB pen, press F12, and then select the appropriate boot device.

  Please check if you turn off the option to secure BIOS, boot before trying to install a new OS.

• Equium A110-233 - I need to manually select the boot device menu

  In the last few days when I turn on my laptop Toshiba screen appears but I need to go and select the device to boot to start windows manually.

  (Down to the bottom of the message "press F2 for set up. Menu of device selection entering boot')
  Why is - this started and what can I do to get it to access directly to Windows XP as before?

  After turning on your laptop, please use the F12 button and you will be able to select the first boot device.