Crystal face has lost

Similar Questions

• my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

  my iphone 4S has lost carrier no service modernized 9.3.5 software but my other 4 s with the same carrier is very well after upgrade

  Hi rog247,

  Thanks for posting here in Support of Apple communities! After reading your post, I see that your iPhone 4S shows 'No Service'. It is certainly important to have access to mobile data; I would like to help get this sorted out.

  Please follow the instructions here:
  

  If you see no Service or research

  If you see no Service or search on your device, or cannot connect to a cellular network or cellular data, follow these steps:

  1. Check your coverage area to ensure that you are in an area with a cellular network coverage.
     • If you cannot connect to a cellular network on your iPhone, make sure that the cell data is on in settings > cellular*. On your iPad, go to settings > cellular data.
     • If you travel internationally, make sure that your device is set up for data roaming. Go to settings > cellular > data roaming.
       
  2. Restart your iPhone or iPad.
  3. Looking for a carrier settings update.
  4. Update your iPhone or iPad to the latest version of iOS.
  5. Remove the SIM card and put it again. If the SIM card is damaged, or does not fit in the drawer of the SIM card, contact your carrier.
  6. Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.
  7. If you have another device, see if you can connect your business with her network to this place.
  8. Contact your operator for:
     • Make sure your account is active and in good and due form.
     • Make sure that there are no failures in your area.
     • Verify that your device is not blocked to receive cellular services and is set up with the right data plan.

  If you still cannot connect to a cellular network and have confirmed with your carrier is not a problem with your account, or your network, try to restore your device.

  If you cannot connect to a cellular network or cellular data - Apple Support

  See you soon!

• I received an error message on my iPad: the application has lost the device context when I try to open the Jam Cookie

  If someone got the error message: "the application has lost the device context? This appeared on my iPad on the application of jam cookie there is a thin red strip across a black screen with the error message locked in the red band. Help!

  Reset the iPad.  Press and hold the power and home together for 10 seconds until the Apple logo appears.

• Does anyone know how to return the icons in the sidebar color safari?  My mac has lost this ability on the upgrade to El Capitan.  Thank you.

  Does anyone know how to get Safari sidebar icons to color?  My mac has lost this ability when I upgraded to El Capitan.  Thank you.

  rmcdga wrote:

  Does anyone know how to get Safari sidebar icons to color?  My mac has lost this ability when I upgraded to El Capitan.  Thank you.

  rmcdga ~.

  Safari sidebar slips into view, move the mouse to the left or by clicking on the icon in the toolbar.

  There are 3 menus through the albums has only 2 3 show any color.  This is part of the new flat design, minimal color (a bit like side bar of the Finder)

  Favorites - No.

  reading list - Yes (if photos)

  subscriptions: Yes

• iPhoto has lost about 3000 pictures

  I need help!

  My iPhoto has lost about 3000 pictures in the web I read something about a corrupt library.

  If I scroll in my pictures, I can see them for a few seconds, and then they disappear! I can't find them in the masters (iPhoto 11) and the iPLM show me entered as missing.tiff of the document with no content.

  Can someone help me?

  Thank you for a booty!

  If I scroll in my pictures, I can see them for a few seconds, and then they disappear! I can't find them in the masters (iPhoto 11) and the iPLM show me entered as missing.tiff of the document with no content.

  What happened, until the photos have disappeared?

  Did you move your library to a different location or restore your iPhoto library? Have you run free cleaning of storage applications?

  Where is stored the iPhoto library?

  If missing photos are no longer in your folder of masters and IPLM missing reports TIFFs, the photos are actually missing.  Is there a 'Old masters' folder in your iPhoto library?

  Try to restore t the library since the last Time Machine backup, you did until the photos have disappeared.

• How has lost all my passwords that are automatically populated? Can I get back them?

  I used to have all my passwords stored, then it their information automatically. Now he has lost all, and it doesn't have a firefox popup where it asks if I want the preserved Word. I need my password OLD return... I did not and now can't get into many of my sites. Thanks for any help you can give me... I don't have this bar on top either.

  See https://support.mozilla.com/en-US/questions/901716

• Satellite Pro A200 - hard drive has lost half it's memory

  I have a toshiba Satellite Pro A200 on Vista. Vista came preloaded and I not all disks for it. I got it from the new (Sept 2007). The hard disk is divided into units. Recently my C drive has filled competely and I now no space left (went 55gigs) I store some data in this drive. All my multimedia elements (music, photos, and other files) is in my E drive. I have to run C Cleaner whenever I start in order to have enough space for the operation of the computer. I also remove all but the last restore point in order to function.

  I am at my wits end and think I must have a virus or something. Is there a way to restore the computer to the 'new '? I have all my files backed up on an external hard drive, so I don't mind from scratch. Not keeping in mind I have no install discs as Vista came preloaded.

  Can anyone help? Please, I beg you!

  Hello

  If you don't have a recovery disk, you can order from Toshiba for the money. Otherwise, you can get copy of Windows and installed with the drivers of Toshiba (http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp)
  Then, you mentioned that hard drive has lost half it's memory, tell you if it was ok before but not available? Please check disk management, utility of the Panel. What is shown here?

• Pages has lost ONLY the ability to print the envelope templates.

  Pages for Mac has lost ONLY the ability to print envelopes pistols (Mac OS 10.11.4 Pages 5.6.1) corrupt app? How to restore without buying new program?

  Test installation of response to my email.

• Time Capsule has lost the Internet connection and DNS servers

  I use a Time Capsule for Time Machine via Ethernet backups for a couple of years, use it in mode bridge taking its Internet connection directly from my router and connected in turn by Ethernet to my iMac. (Most of the time that I also had wifi off on my iMac and took my Internet directly via the TC Ethernet connection.) A few months ago I upgraded to El Capitan, and the TC has lost its connection Internet (flashing yellow). A few days later I drove back to the Yosemite (for other reasons - Mail had gone mad) to restore a backup of the TC and everything was fine again for a few months. It may or may not be meaningful I plugged TC yesterday to new laptop for my wife to support for the first time, and this laptop is running El Capitan. Since then, the TC has once more lost its Internet connection and DNS settings and is stuck on flashing orange. By clicking on the 'Internet connection' status alert, tells me that the TC is not a valid IP address.

  

  I have reset the TC, repeatedly and reconfigured but all without success. After consulting the other discussions, I also tried giving the unit an alphanumeric name with no spaces & special characters and change the IPv6 "Link-local" configuration only, but this did not affect the result. And I updated the firmware for good measure. Then I unplugged overnight and carried out a full power cycle the steps recommended here, restart the router, TC and the computer (and performed a factory reset on the TC, while the router & computer was turned off). After doing that, the TC has become undetectable by AirPort Utility, until I have reset reconfigured once again, he and ended up in the same place.

  It may or may not be important to mention the following:

  1 when you set the TC after a reset, I repeatedly selected the option of adding to an existing network instead of create a network, but the installation wizard who ignored each time.

  2. in the installation each time, this point, I shows me the following, which seems to suggest that there is a problem but don't say so explicitly:

  

  I would be grateful for any advice.

  Weird how everything's going well for a few years and then crazy when you have something will change.

  El Capo adds some network problems more... but something could be fundamentally wrong with the installer.

  Your current configuration, it is apparently bridged but cannot get an IP address. The address 169.254 is give it since it's self generated.

  You need to do a manual installation. It simply means the Assistant is unable for any reason to be your network so start over and do it manually of misfortune (wow, or also possible misery, woah being where you are now!) to go...!

  1. I need to know what modem you are connected. Make and model please?

  2. the most important. What is the main router on your network or a modem?

  I gave the edge to make manual settings a few times. Somehow my instructions for Yosemite/El Capo got lost... I'll try and hunt down them. In the meantime, the basic method remains the same.

  https://discussions.Apple.com/thread/6509420

  It is not so difficult... You just know where you're going before you start.

  Airtport Utility cannot find airport Time Capsule on one of my Macs 2009

• Touchpad has lost some features

  My touchpad has lost some features... I can still do the click function but striking swiping does not move the cursor. (I had to add a mouse to the laptop to get my cursor to move).

  It begins only after I have connected to the computer. The touchpad has all of the features, while I'm on the login screen, it starts only failed once Windows appears. Which leads me to believe that this is a setting in Windows.

  I tried to disable and re-enable the touchpad in the mouse settings functions; remove the touchpad Device Manager and restart the computer. checked all my touchpad settings were the same, none had changed.

  Windows says I have the latest drivers for the device. But just to be sure, I entered my model number of the laptop on the Toshiba Driver Downloads box and downloaded the synaptic drivers. When I tried to install these drivers installation has failed. (I have not yet tried to remove the drivers that came with the laptop, but that try next if I can't find something else that solves this problem.)

  Can someone please offer suggestions on what else to try?

  At first, I must say that it will be interesting to know what model of laptop you have and what operating system you use.

  Have you tried to turn the touchpad on or off using the F keys?

• Sometime this week, my MacBook Pro has lost its sound. I can't listen to anything that has the sound of iTunes for video clips. It is no longer a Volume icon (speaker w / lines of radiation) on my Menu bar

  Sometime this week, my MacBook Pro has lost its sound. I can't listen to anything that has the sound of iTunes for video clips. It is no longer a Volume icon (speaker w / lines of radiation) on my Menu bar. My MacBook Pro is a mid-2012, 2.3 GHz Intel Core i7 Memory 16 GB 1600 MHz DDR3 OS X Version Yosemite 10.10.5

  Graphics Intel HD 4000. Can anyone help?

  Thank you very much!

  Thai-Anh

  Reset NVRAM may solve it.

  How to reset the NVRAM on your Mac - Apple Support

  Or system preferences > sound, check on 'Volume to see the menu bar' to show the volume of the sound in the menu bar.

• my computer has lost the suond?

  my computer has lost yesterday the sound works well and my speakers in good condition, what can Ido to restore the sound, my English is limited and perhaps something I've hurt please help me thank you from

  Hello

  1. what operating system is installed on the computer?

  2. What is the number of brand and model of the computer?

  3 have there recent changes or updates made on the computer before the show?

  I suggest you to return the item and check if it helps:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• My screen has lost about two inches on each side.

  My screen has lost about two inches on each side. I have no idea what's going on that I just got on my computer, and the mode full screen did not come.

  Hello

  ·         What is the operating system that you are working?

  ·         The computer is a desktop or laptop computer?

  Insufficient information provided by you, please answer the questions above.

  It seems that the screen resolution is incorrect. Try changing the screen resolution to fit the screen. The link below will guide you on how to change the screen resolution.

  For Windows Vista and 7:

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  For Windows XP:

  ·         Click Start, click Control Panel, click appearance and themes, and then click on view

  ·         On the tab settings in the screen resolution, drag the slider, and then click apply.

  ·         When you are prompted to apply the settings, click OK. Your screen becomes black for a moment.

  ·         Once your screen resolution changes, you have 15 seconds to confirm the change. Click Yes to confirm the change. Click No or do nothing to return to your previous configuration.

  I hope this helps you.

• Windows cannot connect to the printer. The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.

  A Windows Server 2003 Standard Edition SP2 32-bit computer is a field, the file and print server.

  A computer on the domain is a machine of Windows 7 Ultimate 64 - bit with HP DesignJet 500 24 printer connected via USB.  The printer is running the latest firmware.  The PC is running the latest 64-bit drivers with no problems to the host machine printing.  The host also has the latest drivers 32-bit (x 86) installed by downloading by other computers on the network.  The printer is configured to share with the share name of HPDJ500.

  Now, on a machine Windows XP Pro SP3 32 bit on the field, I'm trying to connect to the shared printer.  Add a printer > click Next in the wizard of > check "a network printer or a printer attached to another computer" and then click Next > click on "Find a printer in the directory", then click Next > click Find now > HPDJ500 in the list below (the XP machine can see the shared printer on the Windows 7 computer!) and click OK.  At this point, I get an error that says: "Windows cannot connect to the printer.  The name of the printer has been correctly entered, or the specified printer has lost its connection to the server.  For more information, click Help. »

  Alternatively, if I right-click on the HPDJ500 printer listed, then click on connect, I get the same error message but I also see a separate window that says "Connecting to HPDJ500 on H2.ws.net" with the lively projector.  This window also disappears as soon as I clear the error message.

  Please note that this printer worked perfectly as a printer shared, hosted on a machine XP 32 bit on the field.  It works perfectly for the new Windows 7 64-bit machine, but we cannot connect from anywhere else on the network (including the server which translates the same exact error message).  On the server, I also preinstalled drivers thinking there was a problem with a 32-bit computer, trying to grasp the correct drivers from the host 64-bit Windows 7, but that doesn't change anything.

  How connect to this printer?

  Try using the path UNC path of the printer in the Add Printer Wizard.

  Add a printer > network printer > connection to this printer ((deuxieme point)

  Click next to browse (leave blank, the name field) or type the UNC path of the printer (i.e. \\Computername\Printername) path

• Profile of Xbox has lost his identification of windows live

  profile xbox of my son has lost his identification of windows live and now can not be added to the family profile as it comes up with an error, HRT can be restored?

  Essex Templar salvation,

  What is the error message that you receive with the error code if any?

  I suggest you send your query in Xbox forum for assistance on the same: http://forums.xbox.com/

  In the meantime, you can consult the section below: error: the e-mail address or the password entered is not valid: http://support.microsoft.com/kb/906930

  With regard to:

  Samhrutha G S - Microsoft technical support.