CS4 and CS5 play well together?

Similar Questions

• Re-installing CS4 and CS5

  I am trying to reinstall CS4 and CS5 (updates), began to reinstall Dreamweaver and everything was going well and then drive one of CS4 - also OK, but disc 2 does not work! What should I do now? I need really only the Photoshop Extended CS and nothing else... Can I download it somewhere separately?

  If you mean that you want only installed CS5 is possible.  Just install CS5 and when you go to turn it on, after you enter a valid serial CS5 number you will be asked to identify the eligible product (CS4 in your case), and then to provide the serial number for CS4 as proof that you qualify for the use of the CS5 upgrade.

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• First, I'm joining the forum with a question CS4 and CS5 Suite for Mac. Can someone tell me why it is NOT a place to submit a question as it is here?

  First, I'm joining the forum with a question CS4 and CS5 Suite for Mac. Can someone tell me why it is NOT a place to submit a question as it is here?

  Creative Suites Mac forum seems to be closed, so moved that Creative Suites Windows the Forum of Creative Suites "base".

  Then... Post your question and someone may be able to help... is your question about the installation of the old software on a new Mac?

  IF El Capitan Mac read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help (just not Adobe)

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• I'm looking for web premium CS2 with cs4 and cs5 update sources. CD has been lost, but I have all the license keys

  I'm working on CS5 web premium.

  I've updated a web creation CS2 to cs4 and cs5 premium. I want to uninstall my suite for a new installation on the new computer, but the CD was lost on the road. Where can I download the sources? I have all my keys to license, no problem with that.

  Thanks a lot for your help.

  Thomas

  Download the CS4 products

  Download the CS5 products

  CS2 product activation has been abandoned, but you can use your old serial number as a serial number eligible for CS4.

  You are entitled to replacements for CS2, but do not use the upgraded replacement for CS4 serial numbers, I don't think they will work.

  The CS/CS2 activation servers have been removed. Download CS2 and use the new number given to the right of the download link.

  ml https://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.HT

• Uninstall cs4 and cs5, but keep the cs6

  I installed cs4, cs5 and cs6 on my mac. Now I uninstall cs4 and cs5. Can I use the uninstaller cs4 and cs5? After uninstalling, cs6 works or there at - missing components?

  Thank you, Robert

  There should be no problem if you use the uninstaller adobe cs4 and cs5.

• Dreamweaver CS4 and CS5 required.

  Hi all, my career requires me to download Dreamweaver CS4 and CS5.

  I understand that CS4 was recently withdrawn fromm Adobe.

  Please indicate what the icons/links that I need to download both these Adobe, or safely elsewhere?

  Thanks, TJ

  Follow the steps below to download Dreamweaver CS4 and CS5

  1. go to the download page for Dreamweaver: http://www.adobe.com/cfusion/tdrc/index.cfm?product=dreamweaver

  2. sign in with your Adobe ID

  3 copy and paste the following links on the both address bar and hit enter:

  Adobe Dreamweaver CS4 Windows English

  http://trials2.Adobe.com/applications/Dreamweaver/CS4/win/ADBEDRWVCS4_LS1.7z

  http://trials2.adobe.com/applications/Dreamweaver/CS4/Win/ADBEDRWVCS4_LS1.exe

  Adobe Dreamweaver CS5 Windows English

  http://trials2.adobe.com/AdobeProducts/DRWV/11/OSX10/Dreamweaver_11_LS1.exe

  4. save the files.

  5. run the .exe file to start the installation.

• CS4 and CS5 Indy with the same serial number

  CS4 and CS5 Indy with the same serial number may be open both on the same machine?

  Thank you!

  I wonder how you have two versions with the same serial number? Maybe volume license?

  In the world of individual license an upgrade from versions CS4 CS5 would get a new number again, at least in my experience. With regard to the installation of multiple versions (but not different locations, such as the United States and TO the same version) no problem and I often open several versions at the same time to test and answereing questions here on the forum.

• Having trouble disabling CS4 and CS5 Master Collection

  I got the CS4 and CS5 Master Collection installed on my Macbook Pro and Mac Pro. I have recently reinstalled the operating system and do not disable the software before I did. How to do this, so I can reinstall the software? The serial number of the software think that I have already installed the software, because it has not been disabled, but just trying to reinstall on the same computers since I wiped the hard drive.

  Thank you!

  If you have problems to reactivate your software and have no way to disable its previous installations, while the only way to do it is to contact Adobe customer service / technical support, which, with luck, can work on it at their end.

• PS4 and Cintiq don't play well together

  This problem is related to the Cintiq 21 UX & Photoshop CS4 ONLY!

  I have a Setup dual monitor: Cintiq 21 & NEC 19 LCD Miltisync 90GX2 Opticlear. Both monitors are driven by ATI Radeon HD2600XT separate cards with 512 MB RAM video. The system CPU is a chip of AMD Athlon 64 x 2 Dual core 6000 +. I charge what I believe to be the latest drivers from the website.

  Start on the side of the Cintiq PS4; load AN image; picture of Get with 6 bunk rectangles and rectangles is divided diagonally into half of the URHC to LLHC. Lower half is good image; superior hald is a color United, crudely pixelated or gibberish. Drag the image a bit and as long as it is moved it is picture perfect; stop dragging and he returns to the image of the rectangles of 6. Drag on the NEC monitor and the image is strong and clear when dragging but goes transparent as soon as mouse.

  Start the PS4 on NEC side and everything is as advertised. Just drag the image to the Cintiq, and he is always good. Now slide PS4 sideways Cintiq, and everything is always good. Open another image on the side of the Cintiq and the problem repeats.

  This problem is perfectly reproducible, does not happen with any other software and makes it practically unusable PS4. PS3 works as advertised and has always.  I've done 4 install CS4 to see if that was the problem, including a record meticulous cleaning between installs. Situation is constant through installs it. Curiously, the bridge does not have the problem.  I send to Wacom as well.  I gave 2 jpg what look like images.

  Any advice greatly appreciated

  Dave

  The OpenGL makes CS4 a different animal.  You can try to disable and see if the establishment works this way.  If so, confrim it's a driver problem.

  Make sure you run v. 11.0.1 CS4 and you have the latest video card drivers.

• CS4 and CS5 swatches Palette

  Hi there, I know it's small but I was wondering if we could have it fixed for CS6. CS3 < were very good with that because they had no custon UI, but CS4 was bad, and CS5 is a little better, but still bad.

  It's just the window shades, all colors are offset compared to the old version, where they have been set correctly. This image shows what I mean:

  http://i151.Photobucket.com/albums/S133/rickyt_album/imageofswatches.jpg

  If this small UI error could be fixed, it would much appreciated! I also noticed that the version of CS5 Mac doesn't have this it seems.

  It is not an error of the user interface: is that the width of the palette changed because it is grouped with the other palettes that are wider.

  Happened in older versions, so if you grouped the palette with other palettes, changed the width of the pallet, or changed the point of view of witnesses or used a localized version that needed more space for the palette.

• Dreamweaver and AngularJS don't play well together

  Hi, I'm starting on Dreamweaver and AngularJS for the moment and so I'll have a go at using them together. He's not going very well, you can more or less run but Design view, there are red lines around things AngularJS and same property that asks you if you want to remove it...

  I note that it seems to be very good support for JQuery, Visual design support.

  I also note that, in the talks on the AngularJS, they almost never mention an IDE.

  Is there a plan to add support for AngularJS? Or I'm fighting just a lost cause?

  Thank you

  If enough people want the feature, I'm sure it will be added. Use this form to submit a feature request/Bug Report Form request

• ICloud - do they play well together and external Photos library system?

  Due to limited hard disk space, I need to move from a library of Photos 500 GB on a hard drive 3 TB mounted outside.

  If I name an external library as the library of the system, iCloud will recognize it there and add photos recently uploaded to the cloud?

  I formatted externally as MacOS extended journaled. and added to my backup process Time Machine (destination - 3 TB Time Capsule from Apple.)

  My goals are threefold:

  1. create and maintain space of hard drive on my iMac

  2 have a redundant backup of photos/videos of Photos

  3. to have access to these photos and videos for editing/design work, when you travel with MacbookPro.

  Any suggestion for a workflow, different and better appreciated. As well as recommendations for when my library reached the iCloud 1 TB limit.

  Now, my iPhone was crushed and expected the swap - so I need to get the photos/videos on my iMac so that I can save and unload an another 110 GB of media before the Exchange. (And I must improve my OSx).

  Thanks for the answers/help ():

  Pictures 1.0.1

  Yes, that's fine - pictures is perfectly happy with what you have

  LN

• LaserJet 4 L and Vista do not play well together

  I have my LaserJet 4 L hooked up to a Vista desktop via a parallel to USB adapter, using a USB port.  It works very well for a while.  Then, it will not work.  When it fails, the printer info box shows the file in mode 'impression', but it never reaches the printer. And when I try to cancel printing, it can take five minutes to remove.  If I remove and reinstall the printer, it works for awhile - and then the same thing happens. Sometimes rebooting makes the printer works for a while, but not always.  I use Vista 4 L driver. (HP is not posting a 4L Vista driver on their site - they just will tell you to use the one in Vista.) I manually installed the printer and also leave Vista recognize and install it. I get the same results (bad) anyway.

  I begin to suspect the parallel to USB adapter.  (Believe it or not, its documentation is partly in Chinese, and I bought in the USA).  At this point, I could buy another - or I guess I could buy a card for my computer's parallel port.

  (I know this is an old printer, but it worked flawlessly for 15 years, and I don't like junk food it.)

  Any suggestions to solve this?

  Thank you

  Alan

  I don't got no answer on that.  But I managed to solve this problem.  So, just in case, someone else has this problem:

  It was indeed my parallel to USB adapter.  I bought a new parallel cable USB (a cables unlimited, Micro Center brand). The package called for it is Vista compatible and that it supported a long list of old printers HP, Canon, Epson, Lexmark, Panasonic.  It works perfectly. First of all, I just connected the cable to the computer. Vista recognized and loaded a driver.  Then I plugged the other end into the printer and Vista has recognized the printer and loaded the driver for this.

  Be aware that most of the parallel to USB adapters don't pretend to be Vista compatible - and probably are not.

  Alan

• Zbook 17 G3: M2 and Sata don't play well together

  Hello

  Have a Zbook 17 G3 with a drive as boot drive m2. After adding a second SATA drive may not start automatically. It will start only if I select the disk in the F9 boot menu.

  It is the first in the boot order and no secure startup is enabled.

  Any ideas?

  MVH

  Thomas

  I solved it by deselecting QuickStart.

• 5.5 ESXi and ZFS do not play well together?

  A couple of weeks, I've improved some HP DL380G6 of ESXi ESXi 5.1 to 5.5. One of those contains a Solaris 10 VM with a small volume of ZFS with about 120 GB of data and there are regular backups of that provided by using 'zfs send '. With ESXi 5.1 'zfs send' would complete in about an hour. With ESXi 5.5, it is not finished.

  Try to get a 'zfs send' manually in the command results up to a certain point and then stop. Him 'zfs send' stopped at 8 GB, 20 GB, 40 GB, 60 GB on different series. Whenever it starts to run in misfortune, messages such as these show upward in vmkernel.log:

  (2014 01-07 T 05: 51:16.698Z cpu9:32806) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412fc3bbc1c0, 0) to dev "mpx.vmhba0:C0:T0:L0' on the way 'vmhba0:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2014 01-07 T 05: 51:16.698Z cpu9:32806) ScsiDeviceIO: 2337: Cmd (0x412fc3bbc1c0) 0x1a, CmdSN 0 x 12711 world 0-dev "mpx.vmhba0:C0:T0:L0" has no sense H:0 x D:0 x 2 P:0 valid 0 x 0 data: 0 x 5 0x20 0x0.

  (2014 01-07 T 05: 56:16.708Z cpu15:32812) NMP: nmp_ThrottleLogForDevice:2321: Cmd 0x1a (0x412fc2626700, 0) to dev "mpx.vmhba0:C0:T0:L0' on the way 'vmhba0:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0 x 5 0x20 0x0. Bill: NO

  (2014 01-07 T 05: 56:16.708Z cpu15:32812) ScsiDeviceIO: 2337: Cmd (0x412fc2626700) 0x1a, CmdSN 0 x 12716 world 0-dev "mpx.vmhba0:C0:T0:L0" has no sense H:0 x D:0 x 2 P:0 valid 0 x 0 data: 0 x 5 0x20 0x0.

  
  

  When you look at the performance of the system of ESXi, everything seems reasonable until the moment where performance disappears. On Solaris, the system has more than 2 GB of free RAM and makes a constant rate of e/s until this happens and throughput IO falls to zero.

  
  

  Also has anyone seen this behavior?

  If so, how you haven't solved the situation?
  

  The solution to this has nothing to do with the disks, it was networking.

  To solve the problem, I installed vmware tools in the Solaris 10 host, changed the type of e1000g to vmxnet3 NETWORK card and changed the IP configuration on Solaris 10 using the hostname.vmxnet3* instead of files hostname.e1000g* files.

  So, it would seem that there is some corner performance e1000g behavior cases that appear to be inconsistent between the driver in ESXi 5.5 and Solaris 10 that were not already there.