CS5 Configuration - same error after changing the permissions - still getting error

Similar Questions

• Printer problem - after changing the cartridge, I get a message that the USB cable is not connected

  As above. I checked the USB port and it is connected.

  Original title: printer problem. After changing the cartridge, I get a message that the USB cable is not connected?

  Hello

  1. you receive an error message/code when you try to print?

  2. What is the serial number and model of the printer?
   
  Follow the steps.
   
  Method 1
  Run the hardware and devices Troubleshooter
  This utility checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also run convenience store Print that would help us diagnose the problem better
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2

  (a) check the physical connection of the printer and make sure that the USB cable is properly plugged.

  (b) connect the printer to a different USB port and check if it helps.

  (c) check the on another computer.

  Method 3

  Run the fix - it tool from the link.

  Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

  Method 4
  If the previous step fails, follow the steps described in the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
   
  Let us know if it helps.

• 500 error after changing the application CF9 Server account

  Hello

  I changed the user account in my 9 of the ColdFusion Application Server Service.

  After restarting the service I get the following error on every page of my applications:

  java.lang.NullPointerException

  at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:285)

  at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)

  at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)

  to jrunx.scheduler.ThreadPool$ DownstreamMetrics.invokeRunnable (ThreadPool.java:320)

  to jrunx.scheduler.ThreadPool$ ThreadThrottle.invokeRunnable (ThreadPool.java:428)

  to jrunx.scheduler.ThreadPool$ UpstreamMetrics.invokeRunnable (ThreadPool.java:266)

  at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

  I use CF9 Standard Edition and Windows Server 2008.

  concerning

  Claudia

  Hi Claudia,.

  Is the CF app as service account have permissions of file system to the CFM files on the disk?

  HTH, Carl.

• When I try to change the permissions on the folders, I see the error "an error has occurred applying security information to: < \\folder > access denied»

  Original title: APPLICATION SECURITY ERROR

  I recently changed my security permissions for a public folder to full control.  However, when I try to change the permissions of return, you receive an error "an error has occurred applying security information to: <\\folder>access is denied."  I then click on continue and I receive «Cannot save changes to authorization on <\\folder>access denied»  What waste? and how can I solve this problem?

  Hello Craig powers,.

  For that matter, please submit this question to the forum below for Home Server.

  Home Server:

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

• error printhead after changing the printhead in L7680

  I have an OfficeJet Pro L7680 that is a few years old.  Recently, I have noticed a decline in the print quality for mainly black, but also a little yellow, and after changing the black cartridge with no changes, I decided to change the Black/Yellow Printhead.  So, I thought that if I'm trying to change a print head, I should change the other (cyan/magenta).  I bought new Office Depot print heads.  After replacing the print heads that I was able to print a page or two, and then all of a sudden the printer started saying there is a problem with the cyan/magenta printhead.  I tried to remove and reinstall, the suppression and power reset and then put it back up, etc, but nothing moves it.  I have not yet called HP, but I hope that when I do they will help because the print heads are under warranty until 2014, even if the printer is out of warranty.  In the meantime, I thought I would ask here is - it possible I only have a print head of DOA?  Or would it be the printer?  Unfortunately I threw the old printheads immediately (stupid me) so I can't try that goes back to the old magent/cyan print head and see what happens.

  Hello jmmarton.

  Your chip printheads were damaged by inserting wrong while the transport is always on the right side. This document provides instructions on how to replace the printhead to the unit.

  Use the link below to find how to contact HP phone support in your country.

  http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

  See you soon!

• After changing hard drives, I get an error message that says: I need a full version disc windows genuine

  Original title: replacement hard drive configuration issue

  My hard drive crashed and I can't access anything anyone on this subject. I have a second hard drive that was used for additional storage only. I'm doing this second walk my master drive. After changing the cables, jumpers, the bios settings to show as the master I am using the Windows XP disk, I try to put in place. I get an error message that says: I need a full version disc windows genuine, not a disc to upgrade to. When I bought the computer it came with Windows ME preinstalled and there was no disk that came with the machine. When I went to XP apparently, I bought a version upgrade, not the full version. Is it possible to get a cd of microsoft, or download a file, which can help get this another hard drive mounting correctly?

  Thank you

  Jeff

  Hello

  Since you have changed your HDD, I would contact the Microsoft product activation center to get on your version of the operating system. Visit the link that provides the phone number of the same below:

  http://support.Microsoft.com/kb/950929

  See also: http://support.microsoft.com/kb/811224

• Internet connection is slow after changing the MAC address

  * Original title: win7... problems with internet after changing the WIRELESS card MAC address

  I have win7 home ed... .i tried to change my WIFI MAC address of the card (I had a reason to do so), SMAC program change but I could not, the address remained the same... I changed my mind... has decided to forget about this topic... but unfortunately, I had a big problem (very probably)... the internet connection is too slow or stop a few times pages load too slowly or especially do not charge. downloads are always stop in network on Chrome error... I tried a different browser to check, but the problem exists with all explorers, it's big terrible trouble please help me (Note: this problem is related to some how with internet traffic... late night speed is much better, but not 100%... but of course not as speed) ", I had before changing to MAC)... Thank you very much

  Hello

  1. what made you want to change the MAC address?

  2. what exactly happens while you are trying to connect to the internet?

  3. you receive an error code or error message? If Yes, what is the full error message?

  4 have you checked the issue in internet explore as well?

  Please follow the steps below and we update with the results.

  Method 1: Run the network troubleshooter, and check.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Please try following the steps provided in the article and check out them.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For more information, see the articles and check out them.

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps!

• DW change the Permissions of file on FTP Upload

  I had this problem where Dreamweaver CS6 changes the permissions of the file downloading. I get a HTTP 403 error when you try to view the pages. I have to manually reset the permissions on each .html file after download. Sometimes, I have to go through the Server Manager and reset all the permissions for the site. It is not specific to a server, because it happened on three different servers. I am running OSX 10.7.4 on a MacBook Pro.

  It is a known problem for a very small group of people. Adobe strives to isolate the source to find a solution.

  During this time, file a bug report official below with the details of your system:

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  And use a dedicated FTP such as Filezilla or Cyberduck, app until Adobe fixes this problem.

  Nancy O.

• After changing the administrator password in windows server 2003, I can not connect the next day why?

  After changing the password in windows server 2003, when the new password take effect?

  Hello

  In dealing with the problem with Windows Server 2003, it would be preferable to send the same in the Technet community. http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Hope the information is useful.

• HP laserjet p1006: does not print after changing the toner

  I just changed the toner. The green light is on, but when something I send to the printer to print, the orange error light. Before inserting the toner, I pulled the Strip in transparent plastic attached to an orange tongue and the black cloth. I tried to reinsert the toner and turn on/off the printer again. Help please if you can. Thank you!

  Hi @cindycb,

  Welcome to the Forums of HP Support! I read your post and to see that when you try to print after changing the toner, the Attention light. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Make sure all the orange, packaging material is to remove the toner.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Open and close the cover five times quickly. It should print a page with black lines on it.

  You can find the flashing light distribution in this document and the right solutions for the reason that you are experiencing, lights blinking on HP LaserJet P1005, P1006, P1007, P1008 and P1009 Printer Series.

  You use Genuine HP Toner?

  Please let me know the result and if there is anything else I can help you. Thank you.

• Windows cannot change the permissions.

  I am running windows 7 as my operating system.

  I tried to make a change to a file in C/Windows/System32/drivers/etc/hosts, he tells me I don't have permission, I am the only user of the pc, and I have administrators full permissions.

  C / I \have all permissions

  in C/windows I have no permission, and I can't change the permissions of the advice please.

  I tried right click on windows and then properties, then security, I see that I do not have the permissions.

  If I try to edit, I find this edition and all of the checkboxes are greyed out not accessible.

  If I try advanced / change permissions the only thing I can do is view.

  Exactly the same thing happens on my wife's cell phone.

  Hello.

  To change/edit the host file follow these steps

  1. click on Start -> all programs -> Accessories.

  2. right click on Notepad, then select run as administrator.

  3. click on continue on the "Windows needs your permission" Windows UAC.

  4. When Notepad opens click the file -> Open.

  5. in the file name field type:

  C:\Windows\System32\Drivers\etc\hosts
  

  6. click on Open.

  7. make the necessary changes to the hosts file.

  8. click on the file -> Save to save your changes.

  It will be useful.

  Source: http://www.rackspace.com/knowledge_center/article/how-do-i-modify-my-hosts-file

• After changing the port (1521 to 1525 in listener.ora and tnsnames.ora) OEM: the database is down

  Hello

  I'm installing Oracle Database 11 g 2 (11.2.0.4) on Oracle Linux 7.1.

  In short, what I'm trying to do now is changing the default port of 1521 to 1525.

  So I stopped the listener (lsnrctl stop) and then changed my listener.ora and tnsnames.ora:

  Listener.ora

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

  )

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = localhost))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  tnsnames.ora

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  BI =

  (DESCRIPTION =

  (ADDRESS_LIST =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = localhost))

  )

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = bi)

  )

  )

  And then changed the local_listener:

  SQL > ALTER SYSTEM SET LOCAL_LISTENER = "(ADDRESS = (PROTOCOL = TCP)(HOST=localhost) (PORT = 1525))";

  SQL > ALTER the REGISTRY SYSTEM;

  Finally, I started the listener (lsnrctl start) again.

  Then I tried to connect using Oracle SQL Developer to the customer. The port of 1525 works perfectly well.

  The problem is, when I open the OEM (Oracle Enterprise Manager), it says: "the database is down. Please specify the credentials of the host to access the restart and database diagnostic tools," which is like this: http://imgur.com/oKLPW65

  So I logged on the account of the host, and it shows that the database instance, listener and the agent is all down like this: http://imgur.com/Bzr84bz

  It seems that the port used by the OEM is always 1521.

  What should I do? Can someone help me solve the problem?

  Thanks in advance.

  UPDATE:

  After changing the emoms.properties & the targets.xml (thanks to Elisabeth), you will need to reconfigure dbconsole using emca.

  So what I'm doing is decreasing the config:

  $ emca - deconfig dbcontrol db-rest drop

  and then create again:

  $ emca - create config dbcontrol db-rest

  Voila.

  Best regards

  Jerry Antonius

  Hello

  Try to change the port numbers in the following files

  Don't port no 1521 to 1525

  $ORACLE_HOME /_SID/sysman/config/emoms.properties

  oracle.sysman.eml.mntr.emdRepPort = 1525 (before 1521)

  $ORACLE_HOME /_SID/sysman/emd/targets.xml

  (Before 1521)

  (Before 1521)

• AutoConfig required after changing the Paswords

  Hello
  Everytime when I use it to change the password apps and sysadmin, I always use to run automatic configuration after you have changed the passwords on the application and database level.
  
  AutoConfig & change password
  
  But a few days back we had problem in our DR autoconfig changed the entries of the AMT and the password file and the sending of log files has been arrested.
  
  This time, I'm afraid. Should I run it every time on the applications and the database.

  Should I must run autoconfig on DB level also after changing the FNDCPASS apps on the Application tier password.

  Yes, please run AutoConfig on each node application/database layer.

  Thank you
  Hussein

• Unable to connect to APEX after changing the IP address of the server

  Hello
  
  After changing the IP address of my DB server, my DB works perfectly.
  However, I can connect only to APEX locally using localhost in the URL. I can not connect to APEX of remote machines, although I can connect to the DB of remote machines using SQL Developer very well.
  
  Do I need to make changes to the gateway PL/SQL embedded, that I use to connect to the APEX? How can I do?
  
  Thank you very much
  Best,
  Peter

  Hi Peter,.
  >
  After changing the IP address of my DB server, my DB works perfectly.
  However, I can connect only to APEX locally using localhost in the URL. I can not connect to APEX of remote machines, although I can connect to the DB of remote machines using SQL Developer very well.

  Do I need to make changes to the gateway PL/SQL embedded, that I use to connect to the APEX? How can I do?
  >
  With EPG, you don't need to make any configuration changes, you have to work on the new IP/hostname.

  You could try running the following just in case wherever it may help, as SYSDBA

  SQL> EXEC DBMS_XDB.setlistenerlocalaccess(FALSE);
  SQL>COMMIT;
  

  See you soon,.

• HARD does not work after changing the disk partitions recovery media creator

  Hello world

  After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.

  Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
  I got in the OEM recovery partition.
  I am also able to create a recovery using the Windows tool unit.
  You have no idea about it?

  Thank you very much!

  Hello

  Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.

  Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.

  Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.

  I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx

  If you have any other questions you are welcome.