CTS-3010/3000 packs and device

Similar Questions

• I am running XP and I can't use my keyboard and Device Manager is empty.

  I am running XP and I can't use my keyboard and Device Manager is empty. I also have problems with my other computer also running XP and it will only start in safe mode. I tried to restore, and when it restarts it still will not start normally. Help, please

  Hi margaretbrown,

  · What is the number and the model of the computer?

  · Also provide the model number brand of na on the keyboard?

  · What is the service pack installed?

  · Do you remember all the recent changes on the computer before the show?

  Try the steps listed in the link below: No. options appear in the Device Manager list when you open it: http://support.microsoft.com/kb/311504

  And the computer on which you are unable to start up normally, try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Driver DVD disappear from 'My computer' and 'Device Manager '.

  Vista HP Portable DVD player continues to disappear from 'My computer' and 'Device Manager '. Already tried Upper/LowerFilters.

  Hi, a few weeks ago, the DVD burner in the laptop suddenly disappearedmy computer (Windows Explorer).  The first thing I did was check theDevice Manager to see if the drive was there.  It was not the case.  Restarting the laptop did nothing.  Repeated several times, active Vista updates.  No change.  By checking the net, I tried to delete the Upper/LowerFilters in the registry, download it tool Microsoft fix , delete iTunes, do a system restore, to change all the parameters of thesleep and hibernation off and a few other things.  It appeared for the first time after that:

  1. Do a restore of the system for the first restore point.
  2. Remove the DVD writer.
  3. Restarting the laptop.
  4. Research of new hardware in Device Manager .
  5. Change all parameters of standby and Hibernate off. (I tried this method without this step first, but the drive disappeared after the computer went to sleep and woke up.)  Tried 3 times with the same results).
  6. Closing.
  7. Reinsert the DVD burner.

  On the next reboot, the DVD writer has been recognized and ended up in my computer and Device Manager .  No errors of any kind and no drivers were installed at startup.

  What has happened since then, in the last 4 or 5 days, is randomly disappears from thedesktop .  Usually after a few hours or more.  This time, however, it usually appears inDevice Manager after a search of new material.  No reboot required.  It will read from a DVD .avi files each time.  It has not been detected byDevice Manager maybe about 2 or 3 times, and after a simple reboot, it will be present inmy computer and Device Manager automatically after a reboot.  I read that the superior/UpperFilter mark has worked for many people, but for some, the problem returns.  In addition, many of the discussions on this question and proofreading are years.  It happened about 10 days ago.  Within 2 days before the problem appeared first, it was an update of windows, but also an update of iTunes.

  I noticed that I received this error when opening iTunes:

  "The registry settings used by the iTunes for importing and burning CDs and DVDs are missing. This can occur as a result of installing other CD burning software. Please reinstall iTunes. ''

  I have not reinstalled, no DVD player.  Uninstalled itunes again.  Since I finally got the drive to appear (using the method I described above), I did bother to reinstall iTunes because I particularly need it on this computer, worried that it may be the cause of the original problem and I wanted to see if the disc disappears again.  I did do it, however, let QuickTime installed.  Don't know if this could be a problem?

  I stumbled upon this suggestion, but I also had the same question as the next post, and I have not seen a response.  I don't know if or how I should try:

  Nikki,

  You can not go back if the restore points aren't there. Try to reinstall the IDE driver.

  To do:
  -Click on the round to start and right click on computer
  -Left click on properties, this will open the system window
  -Click on device high Managerin left
  -Click on continue if prompted by UAC
  -Goto the 'IDE ATA/ATAPI controllers' you should right click on uninstall and restart

  BTW that dog rox in this avitar

  See you soon! MCP. MCDST. LVL 80

  Hi, thanks for the comment on my puppy. She is now 5 MB and her name is Nikki, lol.

  Well, I tried what you said, but the IDE ATA/ATAP controllers has a (+), so when I select it does give me not an option to uninstall. It is for me (analysis of the physical changes (or) properties).       and if I click on the (+) sign I have 4 different options. 2 channels IDE, Intel (R) 82801 HEM / HBM SATA AHCI controller and Intel(r) ICH8M Ultra ATA Storage controllers - 2850.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/e3701d75-9dbe-4ae9-9d70-83f14129247c?Prof=required

  What I see in "Device Manager", under IDE ATA/ATAP controllers is:

  IDE channel (x 4)

  Ricoh Memory Stick Controller

  Ricoh SD/MMC Host Controller

  Ricoh xD-Picture Card Controller

  Controller of PCI standard IDE dual channel (x 2)

  The laptop is about 2 years and never had problems.  The DVD burner is hardly used to burn, maybe a total of 5 disks in this time.  It has been used occasionally to read or copy from, but not much.  I'm not convinced that he is dead, as I had 2 die on me in desktop computers, after burning hundreds of CDs in them and read much.

  in any case, I was not able to find any bugs or suggestions (with the exception of 'replace' the reader), so I just wanted to describe my specific situation and see if anyone could help out.  Forgive me for information, I have left out, but I am an amateur when it comes to the problems with the computer and still don't know what mean things or where I can get information on my OS, software or hardware.  All anyone can do would be greatly appreciated.

  This is the information I have:

  HP Pavilion dv6700 Notebook PC

  Optiarc DVD RW AD-7560 ATA Device

  Vista Home Premium

  Service Pack 2

  Thanks again for any help.

  Hello
   
  1. do you have the software installed on the computer of CD/DVD burning?
   
  Check if the CD/DVD drive is recognized in the BIOS (Basic Input/Output System).
  Check ' BIOS: frequently asked questions ": http://windows.microsoft.com/en-US/windows-vista/BIOS-frequently-asked-questions
  Step 1: We also recommend to uninstall the CD/DVD burning software, if you have everything installed, restart the computer and check the result.
  Scan for the device in Device Manager. To do this, try the following steps.
  1. click on start, type devmgmt.msc and press to enter.
  2. click on one of the items in the list, click the Action menu and click Scan for hardware changes.
  3. check if the CD/DVD is displayed.
  
  For more assistance on this, contact the manufacturer of the laptop.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• CTS 3010 Participants

  Greetings,

  They say that the maximum number of participants in one room when you use the CTS 3010 is 6.

  Is it possible to scale up to 18 people per site?

  Thank you!

  Hello Fadel

  Of course, you can upgrade 3010 to 3210. Its very easy as you need change existing camera with lens wide angle, and install second line table.

  Please contact that your Cisco account manager and he or she will be able to help organize that.

  Of course your existing room must be large enough to accommodate the second row of table.

  Thank you

  Rafal

• difference between CTS-INTP-C90-K9 and CTS-C90-K9

  Hello

  What is the difference between CTS-INTP-C90-K9 and CTS-C90-K9?

  Kind regards

  Peter.

  Hi Peter,.

  The partnumber CTS-C90-K9 is basically the codec C90, it only includes:

  C90 Unit Codec

  Remote control TRC 5

  C90 CODEC license key

  Presenter products natural package (APM) for the C series

  Rack mounting kit

  HDMI cables and power

  The CTS-INTP-C90-K9 partnumber is a complete bundle, including almost all of the required components. See the following document:

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/codec-c-series/installation_guide/78-19773-02_Codec_C90-C60-C40_Integrator_Package_for_web.PDF

  Note This touch device isn't on the list, because it is optional, but it can be included in the same package for the partnumber CTS-INTP-C90-K9.

  I hope this helps.

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.

• Hi, I bought a brand new 6 s iPhone known most 16 GB from a local retailer. He convinced me to buy the demo not selling iPhone that was attached packed and said his new never used but only after opening updated iOS... Is this phone is normal?

  Hi, I recently bought a new model of more than 16 gb iPhone 6s from a known retailer. The phone wasn't demo for sale but he convinced me saying his seal all packed and quite simply not been used and do not have the phone to the ear, but that he provided separately. But now, after opening the seal that he had to upgrade the iOS and I was skeptical since, but he said its normal to update for all the phone manufacturer before the new iOS. the phone feels very well and works normally, but I feel fuzzy and would like to know if the phone is like nine normal phone or not because I paid him the money together without discount. Also the logo behind apple not incorporated that fine and feels separately. Help, please

  Is this retailer authorized Apple dealer?

• Portege 7020 error message: PXE - E01 PCI vendor and device ID do not match

  Hi all

  I get this error message (ID PXE - E01 PCI vendor and device do not match) when starting, when I use my portege 7020CT on a cd-docking station. The error message occurs only when I boot with the power adapter.
  I know what means the error message, and I tried to change the boot priority and the BIOS update. None of that helped him. I can't say when the error occurred since I used a LAN card wireless for a long time.
  The ethernet LAN for now, so im card dosnt work using an ethernet pccard.

  Toshiba has released a "patch" for this problem but only with the station of transhipment on the DVD, I also tried, but it didn't work either.

  What seems strange is why the problem only occurs when the power supply is turned on?
  When the message appears, the screen is locked and I can not pass.

  hope someone can help me.
  / Dreadeye

  Hello

  Well, you're right. This message is displayed if it of not possible to boot from LAN.
  In this case, it s advisable to change the boot priority.
  But it seems that you have already tried to change this option. It s very strange questions because it s occurs only if the power supply is turned on.
  I n t really have no idea, but I found this site:

  http://support.Intel.com/support/network/adapter/1000/sb/CS-010508.htm

  Try installing the latest Boot Agent. I put t know if it helps but you can try it.

  Good luck

  Good bye

• Lack of cRIO 9154 in the add targets and devices dialog box

  Hello again all you lovers forum useful!

  I have an existing LabVIEW project which includes a Hypervisor PXI real-time target.  One of the devices that target is a chassis cRIO 9114.  I now need to add a cRIO chassis additional 9154 so according to a conditional disable signal, I can modify my code to talk to the old chassis or the new chassis, which keeps my modular code across different hardware.

  However, I write my code update on my regular computer which is not hooked to the target, so when I right click on the target of the hypervisor in my project and select new-> "targets and devices...". ", I can not select the" existing target or device "to be detected automatically.  Instead, I click on the 'new target or device' to add just anyway, and I expand the CompactRIO there, and... no 9154.  I have a bunch of other cRIO features (see screenshot), including the 9114, but no 9154.

  I guessed that maybe my LabVIEW installation (2012 SP1) know not this chassis when it was released last year, so I tried to install the latest drivers from device with discs on developer LabVIEW 2013 that I just got, but he hung up during installation (the first time at 0% the second time at 27%, listed as "Validating install" for long, long before I was abandoned and cancelled).  I restarted my computer, but no change to this problem.

  Does anyone have any ideas as to why I can't choose a newer chassis to insert in my project without that it is actually attached to my computer?  And I was too quick to renounce installation of the driver, not that I don't know if that would have solved the problem anyway?  : PEI

  Thanks for your help, as always,.

  -Joe

  

  Hello Joe,

  The 9154 NOR is a RIO MXI-Express chassis that's why it should appear under the section of chassis MXIe-RIO.

  

  For installation if you are concerned that it has not installed correctly, you can try run a repair on the NOR-RIO software and look at MAX to see if you have RIO 12.1 or 13.0.

• The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it does not list

  I have two printers installed on my laptop, only appears.  The Epson Workforce 600 is connected via a usb cable, the other is a wireless network.  I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something.  When I select "Find a printer", it gives me a list of computer icons.

  Hello

  Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
  responsible for the proper functioning of the printer and their drivers provided.

  Good luck, you need to update or reinstall the latest driver.

  Epson - Support us.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Epson - support from Europe
  http://www.Epson.co.UK/support

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• can not see Add targets and devices in the Project Explorer

  Hello!

  I think I have a strange question. I have the evaluation version of Labview 2010. I am trying to add my cRIO 9004 to a project. I'm just trying to follow the instructions in the getting started with manual cRIO. It is said, add crio to the project by project root right clicking and selecting NEW > ADD TARGETS AND DEVICES. The problem is I can't see the link to the NEW, but once I click that I see not a link under "add new target or device" appear, instead, I see the dialog box to open a NEW FILE LABVIEW appear. everywhere in distress forum/basic knowledge/support of shooting and get started articles have mentioned project root right click > select NEW > select Add a target or peripheral >, as if she IS supposed TO APPEAR STANDARD in all new projects! But I'm not! I do not understand what Miss me. The version of software that I have are below:

  the cRio:

  OR VISA 5.0

  NEITHER RIO 3.0
  RT LV 8.6

  and he allied himself with what I installed on my host.

  I can communicate with the device of cRIO times using MAX as well as ping at the windows command prompt command.

  Any help would be great!

  Thank you!

  Rajesh

  After you have installed the evaluation version of LV 2010, you reinstall all of the other drivers, as for the cRIO?

• I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

  Original title: Journal of spooler

  I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps.     a. Click Start, right click on my computer and select manage.  b. in the console that opens, expand the menu Services and applications.  c. click Services.  d. click the button twice to spool print.  e. in the 'Général' tab, go to Startup Type.  f. the Automatic value.  g. click on the Start button.  h. click on apply and Ok.     Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service.      Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

  Hello

  1. don't you make changes on the computer before this problem?
  2. when exactly you get this error message?

  Step 1: Run the fix it tool using the article below and check out them.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Try the steps from the article below and check out them.

  Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
  http://support.Microsoft.com/kb/915168/en-GB

• trying to install vista service pack and get the error code 8007312... need help

  I am trying to install a vista service pack and continue to receive error code 8007312... need help please

  Hello

  1 did you change on your computer?

  I suggest you to follow the links and check out them.

  Error code 0 x 80073712 when you use Windows Update or Microsoft Update to install updates

  http://support.Microsoft.com/kb/957310

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

• Recent problem that the Autoplay menu does not appear when I plug my digital cameras and devices on Windows Vista

  Recently, I had a problem in that, plugged in my camera and also my phone options auto run does not come up as they used to do.

  The cameras appear under my computer and in Device Manager but not under "Devices that you connect to your computer will be listed here" appear in the automatic game options and this area is totally blank.

  I also checked the box "Use AutoPlay for all media and devices to" check in the auto play options.  CD and USB sticks work very well.

  I have Windows Vista.  I read that Microsoft has sent a security update patch to stop the AutoRun works on Windows Vista.  I tried to turn it around by using their dose, but it doesn't seem to help.

  Any ideas anyone?

  Hi - my problem is now solved.

  Not long after reading the post above the laptop crashed and had to have a replacement hard drive.

  I just got the laptop PC repair workshop, and although there are still a lot of updates to download, I plugged the camera the hurrah the AutoPlay menu appeared.

  Obviously there is something fundamentally wrong with the laptop, but it will be interesting to see if AjutoPlay still works when all the Microsoft updates have been resettled.

  Thanks a lot for your help.

• cannot get rid of the "removable disk" in "my computer" and "Device Manager", after incorrectly removing a USB flash drive

  I stupidly, twice - after using USB flash drives - just shot when he in fact without removing them properly. Now, they are listed at all times in my 'Device Manager' and in 'my computer '. I went into Device Manager and tried to uninstall them. It seemed to work but the next time I booted up Vista found drivers and now they are back in 'my computer' and Device Manager. This does not seem to be a problem, but I would like to get rid of them.
  Joe

  Hi JoeZZ,

  Please see the following instructions on how to see the ghost devices:

  http://support.Microsoft.com/kb/315539/en-us?p=1

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• HP dv7 3000 fan and vga &amp; cpu sinks

  Hello, I would like to know if anyone has the part number of the hp dv7 3000 fan and cpu & heat sink vga. It's with intel core i7 and vga gt 230.

  Thank you.

  Hello

  You can find all the numbers from part/codes for your machine of manuals in the section 'Information Service and maintenance' from the following link:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&prodClassId=-1&ContentType=SupportManual&prodTypeId=321957&prodSeriesId=4011368

  Manual also show you to decide or the pieces on your machine too.

  Kind regards.