CUCM 8 and Tandberg E20

Similar Questions

• Unable to make outgoing calls on Tandberg E20

  Dear all,

  Will be gratefull if someone could help us get a solution.

  We have Tandberg E20 registered (as a third-party device advanced) to CUCM 7.0. We are able to make calls to E20 of SIP and SCCP phones. But we are unable to make calls of E20.

  Can someone help me pls on this...

  Hello

  If you do not configure the SIP URL like [email protected] / * /, change to this format and try it.

  Teck Chye

• Integration of CUCM, CTS and TMS

  We currently have a 8.6/CTS-Man/CTMS CUCM environment for our telepresence system.  All systems are CTS only.  Currently, connect us to a Tandberg system via Server CUBE/VCS/telepresence.

  We are looking at the possibility of integrating the two systems together.  This would involve decommissioning our CTS-man and using their existing planning TMS.  Networks would be open to each other so that they didn't cross highway of CUBE/VCS.

  Can someone tell me please to some documents on the integration of the TMS with our CUCM for planning?

  Furthermore, is it possible to have a single MSDS to perform the planning on the two CUCM registered CTS and saved VCS Tandberg endpoints end points, as well as to perform planning tasks for Community trade marks and MSE8000/telepresence Server?

  Thank you

  Hi Nick

  It is a very good question, and the bellows are drawn from the responses on the features that each product can provide you (CTS - Man and TMS) however as we know the TP Cisco world is changing and moving quickly if the bellows has been updated / changed and can someone comment on this topic will be great for us

  Meetings 1-booking

  TMS:

  -adhoc and meetings,

  -3rd-party endpoints reservation.

  -Ms Exchange, Domino, and API

  CTS - Man:

  -mainly used for endpoints STC booking

  -You can book and include cisco webex

  -Ms Exchange, domino and API

  2 features

  TMS:

  -End suppliers Multi points

  -Telephone directories

  -planning of conf

  -management endpoints (monitoring, Reporting, strong alerts... etc)

  -commissioning

  -integration with 3rd party such as Ms exchange

  -"There is no button to push" for the endpoints of CTS (you can add CTS alis for TMS rooms and book it or add the E164 of the external endpoint CTS as a participant and not these means are a button to push the meeting!

  CTS-MAN

  -integration of calendar

  -Midware between CTS, CUCM system and society of calendaring system

  -provide 'a button to push' scheduled meetings

  -provide interoperability simplified such planning via Cisco MXE

  -Live English option and CTMS geographical selection

  for each of them can provide you with options and features and its depends on the needs of your business, you could keep both or just go with one, if you have endpoints of VCS I would say for sure to the TMS

  HTH

  Marwan

• Update Tandberg E20 TE2.1.0 TE4.1.1. Phone is set to both data & Voice VLAN

  I've updated a Tandberg E20 TE2.1.0 to TE4.1.1 (without encryption) phone is now appear in the two VLANS data & voice/video.

  It seems that the voice traffic and data is properly managed, due to the fact that when I STOP the audio/video/VLAN no appeal that can be sent or received.

  Q: do I need to worry about why the phone of Tandberg is now appear in the two VLANS data & voice/video?

  Thank you, Scott

  Hello

  I think what happens is that when the device is initializing, DHCP tries to get the IP address to the VLAN 100 native. After that CDP discovers there is a voice VLAN, endpoint application address DHCP VLAN 11. So you see twice MAC:

  #sh table of mac addresses

  Mac address table

  -------------------------------------------

  VLAN Mac Address Type Ports

  11 0050.6004.2451 DYNAMICS Gi0/2 / / Tandberg E20

  100 0050.6004.2451 DYNAMICS Gi0/2

  If you open the MAC address table, the entry for 100 will disappear [I hope].

  The other entrance to the connected PC is normal.

  #sh table of mac addresses

  Mac address table

  -------------------------------------------

  VLAN Mac Address Type Ports

  100 1803.73e3.083c DYNAMICS Gi0/2 / / workstation connected to E20

  We have a DDT where we would not obtain a correct address in the case of CDP Auto: CSCtx84402.

  Should be fixed in the TC6 release.

  Danny.

• Update Tandberg E20 TE2.1.0 TE4.1.0. Encrypt or not encrypt?

  Hello

  I am CCNP, but a beginner VOIP, just took a new job.  That is why the first VOIP LAN.

  I upgraded my LAN using switches of WS-C3560X.  I'm upgrading 60 Tandberg E20 video phones from TE2.1.0 to TE4.1.0 because of the E20 not finding the vlan voice.

  I use Avaya S8800 Server CM 5.2.1 with Avaya phones model 9640D01A-1009 and model Tandberg E20 video phones.

  I am trying to decide which software to use; with encryption or no encryption.

  Software Cisco E20

  S52100te4_1_1.pkg AES encryption

  No encryption s52101tenc4_1_1.pkg

  Q1.  What's being encryption?  Voice traffic is the obvious answer to this, no?

  Q2.  This device is at the other end of the encryption?  CM or telephone

  Q3.  Since the appeal will go outside my Avaya CM (ie. call to the outside world), encryption important?

  Thank you for your time and effort.

  Scott

  Hello.

  S52100te4_1_1.pkg AES encryption for the countries where the AES encryption are allowed.

  No s52101tenc4_1_1.pkg encryption is the countries where VOIP encryption is not allowed by law.

  You have only one key to unlock for one of them, so there is really no other choice.

  You can choose to disable encryption on the TE4 version (so it will have the same function as the TENC4), but you are not able to activate encryption on the TENC4.

  TE4 encryption is disabled by default, in any case, if the different software versions are here just for the legal question.

  Q1: Call for installation and the RTP stream can be configured to be encrypted on TE4.

  Q2: Endpoint or device interop

  Q3: It depends if your Avaya CM supports encryption or not.

  Thank you

  Marius

• Failed installation of CUCM IM and presence in be6k

  Dear all,

  There is a new facility in our lab on be6k, we have completed the installation of CUCM.

  However, we cannot install the CUCM IM and presence in the be6k in the section "first node access configuration.

  Please refer to the photo 1/2/3.

  I created the password of security during installation of CUCM, however, it incorrect report in CUCM 1 M and the installation of presence.

  Please comment on this issue.

  Thank you very much.

  Best regards

  Benjamin Lai

  Hello

  -Can you confirm if IM & P server is added IM & P in CUCM under system > server?

  -Is the NTP on accessible CUCM (open SSH > ntp utils status)?

  Thank you

  Shadi

• Tandberg E20 and CUCM 8.6

  Hello

  I have 2 tandbergs what e20 integrated in CUCM 8.6

  1 registered as Native running TE4.1.1.273710 firware version

  1 registered as third-party SIP device (Advanced) TE2.2.1.224666

  I tried registered as 3rd party peripheral running TE4.1 but without success. I made different ways to try, but always without success.

  1 - it is possible to register under 3rd party running TE4.1...? or only works if TE2.2 is running. ?

  2 - the E20 which is registered as 3rd party Sip, while im trying to place a call to an extension of the appeal take about 15 seconds to set up, it is

  the normal behavior? or there is a way to adjust the settings to place the call more quickly?

  Thanks in advance

  Kind regards!

  Hello Victor,.

  I recommend you to use CUCM 8.6.2a

  and E20 on 4.1.2 TE or TE 6.0

  It would probably solve your problem.

  Cisco does not encourage the registration of the party device 3rd on CUCM and you can deal with any call setup.

  Thank you

  Saurabh

• Upgrade of Tandberg E20, EX90 and C20

  Dear Experts,

  I have Tandberg old endpoints with versino points and I want to upgrade in order to be registered to CUCM natively.

  C20 version is T3.1.2

  EX9-version is T3.1.2

  E20 I am unsure with the version.

  I want to install C20 and EX90 T7.0 and E20 version to version T4.1

  What is required for the upgrade, which is the steps? is there an intermediate version upgrade or we can do a direct upgrade later.

  Thanks in advance

  Anas

  Hello

  You can go forward with a direct upgrade. It's not a problem but its compatibility with the version of cucm depends on.
  Olexsander having already asked of the cucm verion it is critical info just in case you are not running on a more recent/compatible version and not in a situation of cucm upgrade.

  Concerning
  Ravi kr.

  Sent by Cisco Support technique Android app

• CUCM: Roles and permissions for Reset/restart of the phone or apply Config

  Can someone tell me what the authorization must be added to a role to allow a user to this role of restart/reset (or apply config - same thing really) a phone device?

  The popup once you press reset/retart or apply config shows just "user is not authorized to access this page."

  Thank you

  Ben.

  Hi Ben,

  What is your version CUCM? you use any custom for these end-users role which reset/restart?

  If so, please add privileges to read/set up-to-date for the resource ' Voice Mail pilot web pages "to the custom role and check.

  Please check this bug ID: CSCug29903

• VCS CUCM BFCP and area profile

  Hello

  Referring to the VCS Release Notes:

  If you configure a trunk to CUCM 8.6, you must create a custom SIP section which does not remove the lines BFCP to CUCM. If you choose CUCM as profile in the VCS, BFCP will be removed and double flow (BFCP) is not possible between CUCM and VCS.

  If this has been resolved with VCS X7.0.3 and if not, what do I have to set in the profile of custom interop with CUCM area?

  Thank you!

  Tino

  Hi Tino,

  Thank you for this comment. I'll test in my lab.

  During this time the information you are looking for is you can get under the link below.

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/VCs/config_guide/Cisco_VCS_Cisco_Unified_Communications_Manager_Deployment_Guide_CUCM_6-1_7_8_and_X7-0.PDF

  Please see page 46, where the parameter sets are given for the area such as CUCM.

  Thank you

  Alok

• Cisco/Tandberg E20 - reset password

  Hello

  I have looked everywhere but can't find information about how to reset the password on the E20 unit.

  The unit given TE1 software installed and is currently in bad user name or password.

  Is there a guide on how to do this?

  I'm glad it worked out. Be sure to mark the answer as the correct answer for others. Thank you.

  Sent by Cisco Support technique iPhone App

• Migrate CUCM, CUP and CUC VMS from the physical server Dell to a UCS

  Hi all

  We have 3 virtual machines from one physical server to Dell, we want to migrate those virtual machines from a server of the UCS.

  Reference Dell physical server:

  Model: PowerEdge M610

  UCS: Version of UCS B200 M4 3.0 (2 c)

  I was wondering if just copy all the files of the virtual machine to another server or there is another procedure to do this... and also we need new licenses of vmware?

  Thank you very much!!

  Kind regards!

  ESXi licenses is up to you, you might have bought it so that the UCS, or buy directly from VMWare, but you need to license.

  As for traffic, if you have vCenter, you can move the virtual machines using it (vMotion and/or Storage vMotion), or if not, you can perform a cold migration.

• Question about commissioning of the E20s - CUCM and TMS

  If we now run software CUCM 8.6.2 and 4.1 E20.  I played with CUCM and TMS supply by and a few questions.

  It seems that there are some features that can be set via the TMS models that cannot be resolved via CUCM (MTU, custom, etc commands).  Is it possible to apply these settings through TMS while having the unit registered in CUCM?

  Essentially, I want my call recording platform CUCM and control, but want to keep the granularity that TMS offers in terms of commissioning etc..  I expect the same problems with C-series, etc.

  Am I right in saying that, in order to get the E20 to join CUCM, I need to define the external Manager to "CUCM", and thus eliminate any possibility of TMS to manage? Otherwise, what is I could have managed by TMS and then set the SIP of the E20 to point to CUCM via templates in TMS?

  Any tips on that?

  Hello

  Having both TMS and CUCM to manage endpoints is not a good idea (yet). TMS and CUCM will return to each of the other toes with unpredictable results.

  With TMS 13.2, I understand that you should be able to import the CUCM in TMS and then find all systems registered to it and import these into TMS, however in this case TMS plan only systems conferences and will manage them not active (you can see status of the call as well).  13.2 TMS is not yet released, so that's what I said must be in this version.

  So basically now if you use CUCM, use CUCM provisioning and don't use TMS.  We focus on interactions with systems registered with CUCM TMS and it will be more developed on this in the future.  I recommend you check out the TMS13.2 release notes released to see if it is mentioned.

  Thank you

• Using the Codec C90 Tandberg T1 with CUCM

  Hi all

  is it possible to register the Codec C90 a Tandberg T1 to the CUCM?

  We are currently trying to save one, but the State of the record is still "failed: 485 ambiguous." The CUCM tells us that the record is rejected. Is it possible that the problem is the product ID, which is "Cisco Telepresence T1". We can only select C90 Cisco CUCM on. If it does not, and the device is rejected.

  Is there a way to fix this? Perhaps saying the C90 is therefore more a T1? We have already tried to remove all optionkeys, but there is a 'unknown' type which cannot be deleted. Could this be the key T1?

  I hope good answers :)

  Kind regards

  Jannik

  Looking at the matrix unit CUCM package compatibility, TANDBERG T Series end points are not supported, IE: are not.

  If you do not want to use the codec C90 T1 of the TANDBERG itself and not the Q1 as a whole, you may be able to change the product key for the T1 be a C90 asking new license keys.  See t3-c90-codecs.

• Adding a TX9000 and TX1300 to CUCM

  If you follow the installation guide for the TX9000 and try to add the CUCM system TX system is not listed in the drop down the list of devices.

  I downloaded the file for the CUCM system COP but the TX9000 or 1300 is not listed in the drop-down list when you add a new device.

  Could someone point me in the right direction.

  TX9000 Version: 1.9.0

  CUCM Version: 8.6.2

  Hello

  you have not (only) to download the firmware of endpoint (as you did via file COP upload), but you must install the last devicepack for your CUCM first.

  (for example "Cisco Unified Communications Manager 8.6 (2.22038) package of device"-Compatible Version UCM: 8,6)

  This prepares CUCM webUI and download files of the Conference of the parties for the various points of entry (new end points such as TX and the files updated for existing devices).

  Keep in mind:

  -Dev Package installation automatically change all the default firmware, then you may need to clean up these settings.

  -You must install the pack of dev on each node of the Cluster CUCM

  After you have installed the dev package, you will find the new endpoint TX points listed.

  Once you have registered, you are free to install COP files newer than the next with the pack of the device.

  Good luck

  Thomas