Update Tandberg E20 TE2.1.0 TE4.1.1. Phone is set to both data & Voice VLAN

Similar Questions

• Update Tandberg E20 TE2.1.0 TE4.1.0. Encrypt or not encrypt?

  Hello

  I am CCNP, but a beginner VOIP, just took a new job.  That is why the first VOIP LAN.

  I upgraded my LAN using switches of WS-C3560X.  I'm upgrading 60 Tandberg E20 video phones from TE2.1.0 to TE4.1.0 because of the E20 not finding the vlan voice.

  I use Avaya S8800 Server CM 5.2.1 with Avaya phones model 9640D01A-1009 and model Tandberg E20 video phones.

  I am trying to decide which software to use; with encryption or no encryption.

  Software Cisco E20

  S52100te4_1_1.pkg AES encryption

  No encryption s52101tenc4_1_1.pkg

  Q1.  What's being encryption?  Voice traffic is the obvious answer to this, no?

  Q2.  This device is at the other end of the encryption?  CM or telephone

  Q3.  Since the appeal will go outside my Avaya CM (ie. call to the outside world), encryption important?

  Thank you for your time and effort.

  Scott

  Hello.

  S52100te4_1_1.pkg AES encryption for the countries where the AES encryption are allowed.

  No s52101tenc4_1_1.pkg encryption is the countries where VOIP encryption is not allowed by law.

  You have only one key to unlock for one of them, so there is really no other choice.

  You can choose to disable encryption on the TE4 version (so it will have the same function as the TENC4), but you are not able to activate encryption on the TENC4.

  TE4 encryption is disabled by default, in any case, if the different software versions are here just for the legal question.

  Q1: Call for installation and the RTP stream can be configured to be encrypted on TE4.

  Q2: Endpoint or device interop

  Q3: It depends if your Avaya CM supports encryption or not.

  Thank you

  Marius

• Updated to Win10, now the ch & Lr have error 0xc0000007b. Set display to date, no change driver. Run as admin, no change.

  Updated to Win10, now the ch & Lr have error 0xc0000007b. Set display to date, no change driver. Run as admin, no change.

  Hi Michael,

  Please, download the file vcredist_x64.exe for Microsoft Visual C++ Redistributable 2012 4 update this link and share the result:

  https://www.Microsoft.com/en-AU/download/confirmation.aspx?ID=30679

  Kind regards

  Claes

• Unable to make outgoing calls on Tandberg E20

  Dear all,

  Will be gratefull if someone could help us get a solution.

  We have Tandberg E20 registered (as a third-party device advanced) to CUCM 7.0. We are able to make calls to E20 of SIP and SCCP phones. But we are unable to make calls of E20.

  Can someone help me pls on this...

  Hello

  If you do not configure the SIP URL like [email protected] / * /, change to this format and try it.

  Teck Chye

• After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?

  After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?  Help, please.

  You can not

• Tandberg E20 and CUCM 8.6

  Hello

  I have 2 tandbergs what e20 integrated in CUCM 8.6

  1 registered as Native running TE4.1.1.273710 firware version

  1 registered as third-party SIP device (Advanced) TE2.2.1.224666

  I tried registered as 3rd party peripheral running TE4.1 but without success. I made different ways to try, but always without success.

  1 - it is possible to register under 3rd party running TE4.1...? or only works if TE2.2 is running. ?

  2 - the E20 which is registered as 3rd party Sip, while im trying to place a call to an extension of the appeal take about 15 seconds to set up, it is

  the normal behavior? or there is a way to adjust the settings to place the call more quickly?

  Thanks in advance

  Kind regards!

  Hello Victor,.

  I recommend you to use CUCM 8.6.2a

  and E20 on 4.1.2 TE or TE 6.0

  It would probably solve your problem.

  Cisco does not encourage the registration of the party device 3rd on CUCM and you can deal with any call setup.

  Thank you

  Saurabh

• CUCM 8 and Tandberg E20

  Hi all

  I tried and tried to record my E20 to the CUCM8.0 (3) as a third-party SIP (Advanced) with no luck.

  Someone at - it step by step for her.

  I have set up for the end user with username 1000 and digest the 12345 password

  Set up the new device as 3rd party SIP advanced

  Digest enabled in the device profile

  selected the user created earlier as a user digest

  used the Standard SIP profile for the SIP profile

  On the E20, I configured the SIP 1 profile with

  Proxy 1 - IP address of the CUCM8

  Authentication username - 1000

  Password - 12345

  URI - 1000 (I tried [email protected]/ * / _address_cucm)

  And I can't function. Can anyone help with this please. You don't see any problem with my setup. Thank you

  Adnan

  Adnan,

  I recently had to set up a SIP of Mitel 5224 CUCM 8.5 phone.  Here are the steps I did to make it work.

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "}

  Procedure for the establishment of a third party SIP device with CUCM (5224 Mitel in this case):

  CUCM single installation:

  1. create a SIP profile for the third-party SIP phone that is a copy of the Standard SIP profile

  2 create a copy of the profile for the third-party SIP phone advanced security SIP Phone and check the authentication Digest

  Installation of CUCM telephone:

  / * Style definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-priority: 99; mso-style - qformat:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman", "serif" ;} "} 1. create the SIP phone in CUCM as a basic or advanced SIP device

  (Basic requires 3 DLU gives you 1 line. Advanced requires 6 DLU and gives you up to 8 lines with video)

  a. use the SIP and the security profile you created previously

  b. set the phone user digest to the end user of the phone

  c. create a line for the phone and note the extension

  2. find the end user you want assigned to a phone in CUCM

  a. set their Digest credentials (this can be critical assigned to be the same password for all users, but there's a security risk)

  b. associate phone end-user normally

  Third-party SIP telephone phone installation (this is specific to a 5224 Mitel therefore do everything that is needed for your phone):

  1. Phone start pressing down on the *SUPERKEY* (blue button)
  2. Use the phone keys to SIP mode and the phone will restart
  3. Find the IP address of the phone and connect on the phone admin page (sup: admin p: 5224)
  4. Select the Quick Start link on the left

  a. the user is the extension in the call manager

  (b) full name of the user, it's how you want the phone shows the number/user

  c. SIP to authenticate user and password are the user username and password SIP Digest in CUCM

  d. SIP Proxy server is the address IP of CUCM

  e. SIP Register Server is the address IP of CUCM

  f. press on apply

  From what I've read above maybe your security profile is not setup correctly?  Moreover, if the Tandberg camera does not make the distinction between the phone user name and the username for authentication then then end-user in CUCM name must also be the extension number. If it is to distinguish between them, you can use the user name of the phone as an extension (do not use the @) and the user name to authenticate as user name of the end user.

  I hope this helps.

  -Steven

• Upgrade of Tandberg E20, EX90 and C20

  Dear Experts,

  I have Tandberg old endpoints with versino points and I want to upgrade in order to be registered to CUCM natively.

  C20 version is T3.1.2

  EX9-version is T3.1.2

  E20 I am unsure with the version.

  I want to install C20 and EX90 T7.0 and E20 version to version T4.1

  What is required for the upgrade, which is the steps? is there an intermediate version upgrade or we can do a direct upgrade later.

  Thanks in advance

  Anas

  Hello

  You can go forward with a direct upgrade. It's not a problem but its compatibility with the version of cucm depends on.
  Olexsander having already asked of the cucm verion it is critical info just in case you are not running on a more recent/compatible version and not in a situation of cucm upgrade.

  Concerning
  Ravi kr.

  Sent by Cisco Support technique Android app

• Cisco/Tandberg E20 - reset password

  Hello

  I have looked everywhere but can't find information about how to reset the password on the E20 unit.

  The unit given TE1 software installed and is currently in bad user name or password.

  Is there a guide on how to do this?

  I'm glad it worked out. Be sure to mark the answer as the correct answer for others. Thank you.

  Sent by Cisco Support technique iPhone App

• I've updated Firefox, another file (exe type) have also downloaded. There is no exact date, just the day. I can't open it.

  This is the file: https://s3.amazonaws.com/turbo-bundles/windows/e3231ef3418f60951e7d0ff44ed9f476/TurboYourPC_Setup.exe
  Can you help me to explain what it's for? I have a lot of problems with changes apparently not allowed in my computer settings.

  Looks like you fell for a fake update notification. Do not attempt to install this TurboYourPC_Setup.exe program, it may be malicious.

• I have updated to iOs 9.3.2 and now my phone has no sound

  I had been turned off of the update for a while and finally decided to do yesterday.  Once completed the update my phone now no sound then to make or receive calls and has no outside sound trying to watch some videos/listening to music, etc.  Is this a software or peripheral problem and how

  I solve this problem?

  It is a problem with your device. Have what troubleshooting measures you tried so far? Have you tried a forced reboot (hold down the HOME and SLEEP buttons simultaneously until the Apple logo appears).

• I'm having a problem with Firefox nightly since the 28.0a1 update (2013-11-19). By browser.tabs.OnTop configuration is set to false, but the notches are on top. Help?

  Everything was working fine until today. I don't like having tabs on top, and I would like to have in the classic position of firefox, as many people as well.

  I hope you'll solve the problem with the next update.

  You can watch this extension:

  • Restorer of classic theme: https://addons.mozilla.org/firefox/addon/classicthemerestorer/

  You can set "Tabs not on top" in the options for the extension on the subject: addons page.

• I have updated to ioS 9.3.2 and now my phone won't open.

  I've just updated to iOs 9.3.2.  My laptop does not open.  Its as if the phone crashed after the update.  This happened to someone else?  I was hoping that this new update would fix my Bluetooth problem and my problem of date and hour now, it seems to be another problem with this new update... I have no access to my cell!

  MSPIN77 wrote:

  I've just updated to iOs 9.3.2.  My laptop does not open.  Its as if the phone crashed after the update.  This happened to someone else?  I was hoping that this new update would fix my Bluetooth problem and my problem of date and hour now, it seems to be another problem with this new update... I have no access to my cell!

  I don't know what you mean "my phone does not open or I do not have access to my cell".

  If you have problems with the update take a look on the link If you cannot update or restore your iPhone, iPad, or iPod touch - Apple Support

• Firefox tells me to upgrade to 10.0.1, but also tells me that my AVG security does not work with the update. What should I do for security? I would jump up to date, but I already blocking problems, which always seems to happen if I don't update to the c

  I want to update, but does not lose the security I have and like you.

  A catch-22 here: updated to avoid blocking-time problems and lose my security, I'm uncomfortable with OR keep my AVG security and put up with the frustration of time hang "Mozilla does not.

  You're welcome, BamaGirl.

• I can't update Firefox, my computer is claiming that I need permission admin (everything else to date very well) I am the admin for this computer and I have the password. Any ideas?

  I can't update Firefox, I tried to disable Firewall etc. My computer says I need permission admin to update Firefox, even if I am the owner and the administrator of this computer. There are updates available and know the password for this computer. It all started when I installed the Noscript tool (that I tried to disable them with the same results)

  This has happened

  A few times a week

  == I installed Noscript tool

  See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
  .....
  If you have Mac OS X 10.5 or newer then follow these steps:
  Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
  Trash the current demand for Firefox to do a clean reinstall.
  Install the new version you downloaded.
  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.