Samsung BD Player reports HTTP port is disabled.
As the subject says, I hung a Samsung BD player on a BEFSR41 router. The router has the current version of the firmware. When I run the test connection to the player, the local connection is good but the Internet connection fails and the message is "HTTP port is disabled."
I searched high and low for a solution without success. I did research on the forum and could not find anything. A test, I connected the BD drive directly on the ADSL modem and Internet connection worked perfectly, it seems that the block is in the router.
I have serched through the configuration of the router and changed most of the settings to try to find something that would work. Nothing worked, so I go back to my installation to its original state.
Any help would be appreciated.
Found the solution!
The problem was with the help of the automatic configuration. The configured router allows you to enter 3 DNS servers. The router is smart enough to try all 3 to resolve a domain name. However, Samsung grabs only first that of the router during autoconfiguration. If the first is bad, no internet connection. By manually setting the DNS server in the Samsung with a valid DNS server, everything is good. Or better yet, make sure the first value of the router DNS server are valid.
Hard to hunt, this is the error message given by the player who the "HTTP port is disabled." So bad, it did not something like "Cannot resolve the domain name."
Tags: Linksys Routers
Similar Questions
-
Samsung Allshare Player stopped working-
Samsung AllShare works with windows 7 for 2 months until today. Now it happens suddenly with message at startup "Samsung AllShare Player has stopped working" and the reason is a matter of compatibility, but what?
I checked all of the properties, including the advanced of those who, for the AllShare program and they are exactley the same thing as the AllShare to program on my laptop that is running Windows 7.
I have a click with the button right on the Office Samsung AllShare icon and then click on compatibility 'troubleshoot' line and we tried different test for the program compatibility settings. This does not work, and a new screen 'troubleshooting a complΘtΘ' comes with the designation - detected problems... "Inconsistent Application has detected"... But incompatible, how and what?
The tab "Details" shows that an "Application Incompatible has been detected", then follows a line indicating "difficulty... ended AllShare application ', but once more not fixed."
'Details of detections' listed are:
Collection information
Computer name: Bill-HP-desktop computer
Windows version: 6.1 (?-I don't understand that number of 6.1)
Architecture: amd64
Time: March 17,2012
Program compatibility:
"Make older programs in this version of Windows
Package Version: 1.5
Publisher: Microsft Windows
Program compatibility:
"Make older programs in this version of Windows
Package Version: 1.0
Publisher: Microsoft Corporation
I uninstalled and reinstalled the program AllShare from 2 sources several times and I installed form a previous restore point - March 7,2012 when he was in fact working well, and none of them worked.
Any suggestions?
Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"? Perform, even if your user name is an administrator.
Try right click on the actual Setup.exe and choosing the option "Run As Administrator"? Perform, even if your user name is an administrator.
This example may or may not work for you with your program it uses the built-in account administrator to install or run the program?
"It seems that the"Run as Administrator"command gives you administrative privileges only, and they are not enough to install Java (and OpenOffice, by association). To work around this problem, you must actually connect to the built-in administrator. Open a command prompt with admin rights by clicking Start, type cmd in the search/run box, hit CTRL-SHIFT-ENTER. At the prompt, type:
NET user administrator / Active: Yes
Then disconnect from your regular account and folder administrator integrated, where you might be able to install the program. When you are finished, open a session to your regular account and, for security reasons, disable the built-in using administrator account:
«net user administrator / active: No.»
How to open a high in Windows 7 command prompt
http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html -
I recently bought a Samsung Galaxy Player 5. This is my first Android device. I use Skype on my PC to talk to my granddaughters. After you install Skype on Galaxy 5, I tried to contact one of my granddaughters. I could see and hear her fine. She could see me, but couldn't hear me at all. I noticed an icon of microphone and tried pushing thinking the microphone can be disabled. It did not help. Finally, I disconnected then reconnected using my PC. All was well with two PC talk. Is this a known issue with a Galaxy 5 using Skype? Is there a setting that can be changed to fix this?
The version of Skype on the Galaxy is 4.0.0.19550 and was installed from the Google game store.
After reading others Android questions, I took advice of one who suggested to delete Skype 4.0 and install Skype 3.2. This seems to have fixed my problem of sound. Thank you all.
-
ASR9001 SFP + port 2 and port 3 disabled auto
Hello
Everyone has the same problems?
We have an ASR9001, when we test the port SFP +, after several days of market, the port SFP + 2 and port3 off yourself.
The port is disabled only, but not err - disable.
We can use command 'stop' and 'no stopping' for the recovery of these two ports.
The fault happened several times and we do not know how to solve.
Everyone knows the reason?
Hi David,
If you use ASR 9001 - S SFP and SFP + 2 and 3 are disabled by default. You can enable with a license.
If you use ASR 9001, you hit the following bug: CSCug60558 - fix for ASR9001 port flap problem
More details can be found at: https://tools.cisco.com/bugsearch/bug/CSCug60558
Thank you
Michel.
-
Running ORDS3 on Port 80 returns HTTP port as -1
Hi all
When I run 3 ADR on port 80, the HTTP_PORT CGI_VAR is returned as -1.
Running on other ports seems to work very well. I tested on standalone and through tomcat.
Version of ADR is: 3.0.0.121.10.23
My settings are:
#Tue 12 May 18:48:34 EDT 2015
DB. HostName = localhost
DB. Password=@0559CC6F456D786F7095F25174DD0091C3
DB.port = 1521
DB. ServiceName = XE
DB. UserName = APEX_PUBLIC_USER
PLSQL. Gateway.Add = true
Rest.services.apex.Add = true
Rest.services.ords.Add = true
Schema.tablespace.default = SYSAUX
Schema.tablespace.Temp = Temp
standalone.http.port = 80
standalone.mode = true
standalone.static.images=/ords/apex_images
User.apex.listener.Password=@05D62C9DE41ED558B85770640A3E8761A5
User.apex.restpublic.Password=@052A5AE163CC46C1AD669F99E6129BBD6F
User.public.Password=@05E805F0B5CEC625BE3C2296AC3161A9D7
User.tablespace.default = Users
User.tablespace.Temp = Temp
(oracle passwords)
that is what follows in a page of the apex:
begin FOR I IN 1 .. SYS.OWA.CGI_VAR_NAME.COUNT LOOP if SYS.OWA.CGI_VAR_NAME(i) in ('HTTP_HOST','HTTP_PORT') then htp.prn(SYS.OWA.CGI_VAR_NAME(i)||':'||SYS.OWA.CGI_VAR_VAL(I)); htp.prn('<br />'); end if; END LOOP; end;
Outputs:
HTTP_HOST:192.168.1.4:-1
HTTP_PORT:-1
Thank you for your report, it is a step backwards and will be fixed in the next version. We have filed BUG 21083867 to follow up on this matter.
-
Change according to the instructions of vmware tomcat http port, still gives error
According to this doc, Centre of Documentation of vSphere 5.5 I should be able to change the tomcat port http. But once I do, I see the errors below. I guess there are other conf files to change, but I can't find those who. I need to change the port to something else than my failure to support another agent of products I need on the vcenter server.
Impossible to recover data on the health of https://localhost:443/VSM/health.XML
Impossible to recover data on the health of https://localhost:443/EAM/eamService-Web/health.XML
Thanks for the reply. After working with support and troubleshooting a bit to mine, vmware help has found a workaround.
I stopped the services of vcenter server and Web services.
I changed the port 8082 to meet my needs in the bio line - vmssl.http.port = 8082 in the file C:\Program Files\VMware\Infrastructure\tomcat\conf\catalina.properties
VMware support also noted this line in that same case, bio - vmssl.https.port = 8443
We changed the 8443 port to meet my online "
https://localhost:8443/eam/eamService-web/health.xml " present in the sectionconfiguration in the file C:\Program Files\VMware\Infrastructure\VirtualCenter Server\extensions\com.vmware.vim.eam\extension.xml We changed the 8443 port to meet my online "
https://localhost:8443/vsm/health.xml " present in the sectionconfiguration in the file C:\Program Files\VMware\Infrastructure\VirtualCenter Server\extensions\com.vmware.vim.vsm\extension.xml I changed the port 8082 in line
http://127.0.0.1:8082/vsm/ovfConsumer / in the file C:\Program Files\VMware\Infrastructure\VirtualCenter Server\extensions\com.vmware.vim.vsm\extension.xmlI started the server vcenter and webservices. Then I start the service in a conflict that also used the port 8081, I have since the change of port 8082 in my configuration of vcenter. In my case, port 8081 used for communication of McAfee Agent throughout our whole environment. After all this, no error is reported by the vcenter service monitor, and I can hit the URLS of health via a browser and get a valid answer.
-
Cannot access internet, check HTTP, FTP and HTTPS port settings
Using Windows XP, cannot access internet. The problems notified that Windows cannot connect Internet using HTTP HTTPS or FTP. Said that it's probably caused by the settings of the firewall. Adiveses to check the settings of the firewall for HTTP (80) port, the HTTPS port (443) and FTP port (21). Did not inform how to do this.
Any suggestion would be appreciated.
Hello
· What version of internet explore are you working on?
· Were there any changes made on the computer before the show?
I suggest you try the steps listed in the links below: how to manually open ports in Internet Connection Firewall in Windows XP: http://support.microsoft.com/kb/308127
"Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer: http://support.microsoft.com/kb/956196
Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357
-
Change the title: internet connection.
Unable to connect to the internet, suddenly, message that I can't connect to the internet using HTTP<>< or="" ftp.="" thios="" is="" probably="" caused="" by="" firewall="" settings="" on="" your="" computer.="" check="" settings="" for="" http="" port(80),="" https="" port(443)="" and="" ftp.="" funny="" i="" was="" just="" on="" the="" net="" not="" more="" than="" 10="" minutes="" prior="" to="" this.="" checked="" all="" conections-="" good.="" what's="" my="" next="">
Try a system restore to a Date before the problem began:
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
-
VPN connection to access the content server on the HTTP port only
Hello
We have ASA5520, and we want to set up an IPSEC VPN profile so that one of our partners can access a server and only on the HTTP port.
I tried to Configure tunneling split with an extended ACL, but probably I'm missing something. I just set up the ACL so that it included all source IP of our server on the HTTP port, but when testing, it did not work.
However, if I configure a Standard ACL on the split tunneling I can access the server and all services it provides.
Do you know if Miss me anything on the extended ACL configuration?
Should I configure it any other way?
Thanks in advance.
Best regards
Igor
Hi Igor,.
To do this, you must use a VPN filter.
Please see this:
* Split tunneling should be a Standard ACL.
HTH.
Portu.
Be sure to note all the useful messages.
-
vCenter Question Upgrade (requirement of http and https ports)
Hello
In vSphere Upgrade Guide, the documentation clearly indicates "vCenter Server 4.0 uses TCP/IP Ports 80 and 443, you _cannot _run vCenter Server on the same computer as a webserver using these ports, because this causes conflicts of port.
Now in the vCenter has always allowed me to change the ports by default during the installation, not only do this to avoid conflicts? My current virtualcenter server using ports 80 and 443 for a bunch of websites and I can't move. I don't have another server that has these free ports.
If any of you have changed the default http and https ports during installation (I even do that)? Problems? All comments in general? VCenter even use these ports for? I searched but could not find a definitive answer.
This is a very critical level and I'd rather not start it until I know exactly what to expect.
Thank you!!
Well the port 80 and 443 are generally webservices 80 http 443 https, it is no different with virtual center, they are used for web access to manage virtual machines etc.
and yes I have changed these on a server vc, when access to the content of the web services via the browser enough ":" at the end of the address
change change will require virtual center of service needs to be restarted
-
Remote Server Update Manager with different http port
To put it simply, I think I might have some problems, but I installed the update on a remote server Manager (and not on the VC server) and since he also manages the WSUS updates, I couldn't use port 80 for the http port so I changed it to 81. I have problems with the VC connection to Manager Update server. I can't download the plugin to activate it. Also, I noticed that there is a full installation of the 2.5u3 on our server of VC, which also included the Update Manager. Should I uninstall that before the new one would connect upward?
Kyle
I'm Tryin '
I found something good again
-
How to change HTTP port programmatically?
Hello
I would like to know if it is possible to change the http port on a server managed by program without repeating the server?
Could it be perhaps with a JMX MBean?
Greetings,
AméoHi Améo,
One more thing... As soon as you accelerate that program... Once the server change port, you will get "* PeerGoneException *"... This is because the Server Port is changed... Now the MBeanServerConnection object no longer able to be connected to the old Port. It's good... So when you write try {} catch {} block to handle this exception, and then create a fresh MBeanServerConnection to connect save() and activate().
Please mark the thread as answered as well... ;) Just for the simplicity of a few users who comes to read messages answered...
Thank you
Jay SenSharmaPublished by: Jay SenSharma on February 25, 2010 20:56
-
HTTP port conflict detected...
Hi all
I'm just new to JDeveloper.
When I try to run the page. XML file in my project... its giving the below the error message in the log file...
HTTP port conflict detected. The HTTP port is reassigned to port 8063.
Starting of the OC4J was cancelled by the user.
The return port assignments to: HTTP = 8062, RMI = 23892, RMI - SSL = 24044, JMS = 9228.
The IIOP return port assignments to: = 5656 IIOP, IIOP-SSL = 5657
If I put the HTTP = 8062 value in 'Embedded server OC4J Preferences', his tent to assign the value HTTP = 8063 then my port instance is 8062.
Please suggest me how to go further.
Thank you
Harish.IF you don't have much of a problem, I suggest that you close jdeveloper, delete the folder system and myclasses and try again. Even in this case if the problem is not resolved, I suggest you to unpack a fresh zip for Jdeveloper.
Concerning
Sumit -
Trouble when not specify the HTTP port
Hey all,.
I'm trying to install JRUN4/IIS and deploy a web application that accesses servlets. I'm fairly positive that almost everything is set up very well because the servlet needs out of XML, however, I get a 404 error, if I DO NOT specify the HTTP port that uses the server - for example, my server is called frank and i've got things configured so that newsite.here.com translates into frank and things pull his IIS. Long story short, I can get out of my servlet if I specify the HTTP port that it is using such as:
http://NewSite.here.com:8303 / htmlcontent.View
However if I access it as:
http://NewSite.here.com/htmlcontent.view
In addition, newsite.here.com should resolve correctly because there are several other pages JSP/etc I can access this site.
Can someone point me in a direction to look? Thank you.Did you run the web server configuration tool (wsconfig.exe)? See http://livedocs.macromedia.com/jrun/4/Installing_JRun/servconf.htm.
Ted Zimmerman
-
Portege 3480CT - DVD player in those Port Replicator errors
I have a Toshiba Portege 3480CT with an external media Port Replicator.
The MPR has a DVD player, but I can't get the laptop to recognize DVD.
He can see and read CDs, but I get the following error when I try to watch a DVD.
"ASPI for Windows is not available...
Only 32 bits supported CD rom drive... »
The MPR recognizes that the drive is there.
Laptop is running Windows XP SP2
Have the BIOS update update and installed all the drivers Toshiba known.
Can anyone help? Thank you.Hello
In my opinion you need driver ASPI Google everywhere. Maybe you will find the solution for your problem. You can start with this one http://www.ncf.carleton.ca/~aa571/aspi.htm
Maybe you are looking for
-
I've updated to Firefox 8, now, it will not keep Me connected to all the sites!
Everything was beautiful and brilliant. Then I updated to Firefox 8. Now any website I want to (Amazon, Facebook, Twitter, etc.) will not keep me connected when I check the box to do so. As soon as I close Firefox and reopen it, I have to log in agai
-
Equium L10: How to configure the wireless card to pick up the router?
Am wireless news and putting in place Broadband BT BT Voyager2091 router. Laptop wireless button in 'on', but is unable to connect or view available wireless networks. How to set up the portable integrated wireless card to pick up the router?
-
Hello I am a student who learns the LabVIEW 2010.Using the LabVIEW program, I want to measure the levels of pH and graphic grid.Therefore, I would buy a pH meter that can be connected to the computer to transmit data.However, I am a beginner so I bar
-
DLL malloc() and free(), and common area of pile
Hello In continuation with my last post, I have another problem, which may be the same, or it may be different. I have 2 dll, a pilot (driver.dll) and a support package (support.dll). If support.dll has the MyDLLAllocFunction() function and it is sim
-
Passport BB blackBerry Lift screen
Madam, Sir, I got my BB Passport 6 weeks and it works fine. today I have whenever I have a creen lift corners of the screen, next to the metal frame and the bacllight will come out. kindly help advising the resolution of this issue. BR, Mina