cursor is frozen Mid-screen,

Similar Questions

• I don't know what happened but my keyboard is coming as split and Mid-screen instead of come inside.

  MY keyboard is now shared and until Mid-screen instead of set and future on the background.

  Press on and hold the small keyboard icon at the bottom right, swipe your finger up to select "merge and Dock.

• My MacBook is frozen. The cursor is frozen and I cannot open a session

  MacBook Air 11 '' did not pay for a few days. I tried to put it and the cursor is frozen. I can't type my password the only used the computer. I suspect the battery may be defective

  Connect it to the sector/charger adapter until the battery is fully charged. You have no proof so far that the battery is defective. During this time. Press the power button and hold the button until the computer turns off. Wait one minute, then restart it.

• NB100 - mouse cursor flies around the screen

  Hello

  So, I bought the NB100 and noticed that something was not right but stupidly put upward with her for over 2 years. Now he is just really annoying as its happens more frequently and, possibly, gets worse!

  Randomly, the mouse cursor flies around the screen, by clicking at the opening programs and files, etc. The only way to stop it is to turn off the laptop holding down the power button. She also does when I plug in a usb mouse (and disable the touchpad) so I assume that it is not the hardware, but I have reinstalled as the driver...

  Usually, if I turn the laptop on its always crazy but if I start it in safe mode its fine. This made me think I had a virus but I did a scan and nothing shows.

  In addition, I don't think that turn it off by holding the power button down is very good for the system that sometimes, when I try to turn it back on, it doesn't load at all (just a black screen with the cursor).

  Help, please! I would be eternally grateful...

  Thanks in advance, Nadia

  need you pretty much time to fix. My advice is to reinstall Windows from disk image or hard drive recovery. Please, understand me, it's easier and quicker to reinstall rather try to fix it.

• Cursor moves on the screen and without entrance music will start to play

  I have two dell - a desktop and laptop computers. We have ATT uverse service of broadband ISPS. My phone receives the signal of a wireless router. Several times, I looked down my laptop and noticed the cursor "darting on the screen. In addition, on occasion, without any input from anyone, audio advertising or music started playing. I have McAfee security and my wireless signal is supposed to be encrypted. Have you ever heard such a thing? It's a little scary!

  Original title: WEIRD ACTIVITY

  Hi, Bandaid99,

  To rule out malware, download the following tool and run a scan complete

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  (1) is the own mouse?

  (2) is it a phone, cell phone, or come close to the mouse?  Their distance.

  (3) is it the humidity or lotion on your hands when you use the mouse?

  (4) the drivers are up to date?

  (5) can you test with another mouse?  Disable the touchpad and start again with the mouse.

  (6) open the Device Manager and uninstall the mouse driver.  Restart windows

  Right click on desktop

  Select customization

  Select the mouse pointers

  Uncheck the enhance pointer precision

  Click on apply, Ok

  Retry using the mouse

  When you hear the sound, you have a page (s) open where the sound may come from ads on the page?

  Update using Device Manager sound card drivers

• Slow cursor on the login screen; How to control the speed?

  I got a laptop HP Win7.  I don't know much it.

  When I on the connection of the screen (account login), the cursor moves very slowly.

  How can I control the speed of the cursor on the login screen?

  I know that when I log on a user account, I can go to a control panel to control the speed of the cursor.  In fact, I did.

  But apparently, which affects only the current user.

  Thing certain, happy to help you.  Just a quick warning: registry changes can break your PC, so proceed with caution. That being said, it must be a very painless process.  Here's what I suggest.

  1. Create a system restore point.
     Prevention is better than cure and this takes only a second.  Type "restore point" in your Start menu, choose the option "create a restore point. In the box that opens, go ahead and click on create and name it something like 'before you make changes to registry' and save it.
  2. Open the registry editor.
     Press the Windows Logo key and type R to open the run, then run regedit to open the registry editor. Accept the UAC security prompt if you receive one.
  3. Go to your mouse settings.
     Access the mouse of your own user profile settings in the registry. It works a bit like the shirts, then navigate to this path:

     HKEY_Current_User\Control Panel\Mouse

     Once you open this key ("record"), you will see all your settings of the mouse on the right side of the window.

  4. Export your own settings of the mouse to a file
     Right click on the folder of the mouse, choose export and save it to your desktop.  Close the registry editor at this point, we're done with it.
  5. Change the saved file.
     We use this file as a template. Go to your desktop, right-click the file that you saved, and choose Edit. It should open in Notepad.  We will only change the 3rd line in the file.  This is change you can do:

     Old: [HKEY_CURRENT_USER\Control Panel\Mouse]
     New: [HKEY_USERS\. Default\Control Panel\Mouse]

     After you have made a change to this line, close and save the file.

  6. Import the settings changed in the registry.
     This is the easy part. Simply double-click on this settings file and allow it to import into the registry when prompted.

  This is import your account settings and apply them to the. By DEFAULT, the account used on the logon screen.  Therefore, after you apply these, restart the computer and you should find that the settings are now on the logon screen.

  Please let me know how it goes.

• my cursor is frozen

  my cursor is frozen.  an image of a notebook with a diagonal red line through it is broadcast for 3 sec

  Hello

  Try double-clicking top left corner of the touchpad - this is the usual method to enable or disable the pad.

  Kind regards

  DP - K

• media, stops and starts with the cursor movement on the screen

  When you watch a video on Youtube or any media file on the internet, it plays very well, then stop so he could continue to play I move the cursor on the video screen, as soon as I stop moving the cursor, it will continue to play and then stop again.
  In other words if I want to display a media file I need to keep the mouse move the cursor over the corner of the screen of media.

  I have no problems with playback of multimedia files stored on my computer. My operating system is Windows 7

  I hope you can help me

  Hello Craig Barnett.

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description, it seems that you are having problems with online videos don't play do not.

  Perform the steps from the link if you have Internet Explorer and check.

  The video problems when you use Internet Explorer

  Answer to us if you are experiencing problems with Internet Explorer or any Windows problem, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Envy beats audio: cursor frozen on screen

  Hello. I hope that all is well. My cursor is stuck in the middle of the screen, I can move it anywhere. My laptop doesn't have a battery that I can get out. Help

  Hello

  Stopping Notepad and then try the menu of the bios again via the following methods:

  Click next to the ESC key as soon as you start Notepad to open the Start Menu, then choose f10 to open the Bios Menu.

  or

  Tap here to f10 as soon as you turn on.

  If you can access the menu of the bios, Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  If this does not help, then it began to resemble a hardware failure.

  Kind regards

  DP - K

• Installed Windows 7 and now can't start Wow, the cursor is frozen on the start screen.

  I tried to restart, resettlement and to plug and unplug the mouse, made sure that all the drivers are up to date! What now?

  Hi navvar,

  Thanks for posting of Windows 7 community.

  I suggest to start the system in safe mode and check if the problem still persists.

  Also download the current drivers and update the firmware of your mouse.

  Step 1: Perform a clean boot

  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click on start to reduce this includes this ima, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  c. collapse this includes this ima if you are prompted for an administrator password or for confirmation, type your password or click continue .

  On the general tab, click Selective startup , and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all .

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK , and then click restart .

  Follow the steps in the below link:

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 929135

  Kind regards

  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Equium M40 - cursor usually frozen - Touchpad very erratic

  My cursor seems to freeze when the laptop is turned on for awhile (heat?) and then suddenly works again after days and days of frost. Have reinstalled the drivers (which worked for 24 hours), sent to Toshiba last week who has reinstalled everything and it worked again for 24 hours only, has been slain for worked days and now it suddenly after all the frozen screen and he would answer no to the keyboard either so I had to turn off at the power button but I have done this before and it didn't work before - WITHOUT RHYME or REASON. This is a brand new machine. WHAT CAN I DO? It makes me mental.

  Hey richie

  It's not easy to say what exactly is the problem. Maybe your unit switches to hot?
  It is also very important, that this laptop should be free of any objects that can cover the ventilation openings. There should be place around the unit so he cans "breath". Sometimes can help to update BIOS. You can also change the performance of the processor and method of cooling of the unit in Toshiba power saver utility.
  Maybe it helps.

  Best regards

• Portege 700 Jumping cursor and liquid on screen

  Hi all
  My Portege 700 is only 2 months old. I am running XP on it. When you type, email or whatever it is, the cursor jumps around previous text in the message randomly. I tried to watch what happens when this happens, but cannot determine what is the cause. This is so frustrating because I'm still typing messages and it takes me now four or five times more time to this simple task as it should.

  I also have a liquid in the middle of the screen. I took it to a repair center and they did what they could to fix under warranty, because of a problem with. I have not reversed anything on what they first suggested until they looked upwards... Anyone had this problem and what was the solution?

  I am a novice when it comes to understanding my PC so when it is not working properly... I'm totally lost.

  Thank you
  BHelson

  Looks like you hit the keyboard as you type on the laptop.
  Try disabling it touchpad with FN + F9, to plug an external mouse or disable tapping in the touchpad settings. I think this should solve the problem.

  The liquid contained in the screen must be cleaned to an ASP. I think that it of the best solution if you bring the laptop of the ASP.

  Good luck!

• NB200 - cursor jumps around the screen while typing

  Hello

  When I type in MS Word or OpenOffice or any other text box on a Web site for example flushing prompt that identifies where the next word/character must be placed around the screen jumps.

  So when I type a line of text I then start another line below and then without reason, that the text cursor jumps to the top line. This inserts text in the wrong place, which is incredibly annoying!

  Any help or ideas greatly appreciated!
  Thesis writing will be more months if the problem persists! :)

  John

  Here is the solution I've used and displayed a few threads down...

  Under the properties of the mouse, click on the "Advanced" tab, click on the pointer speed and Tapping settings, in the new screen click setting Tapping, on this screen, check the box that says disable Tapping during the key entry.

  You will suffer is not since the Cursur jump you met more...

  HTH,

  The f

• Frozen in screen really terminals

  When I picked up the magazine this morning, I noticed that the time on the screen was from 07:00 (time real 7:49 a) of the charge and 100% fresh. Then the loading screen has not disappeared. So I put it on the charger and nothing, it's still there. A few times and still nothing. It was almost an hour that the watch is stuck on the loading of the screen always show 07:00. It does not meet the power button, I can't restart, but it does not vibrate notifications, connect and disconnect, etc... and this Sun to black. Not cause a burn, full intensity, loading screen. Any ideas? Is it possible to restart it otherwise? My replacement watch can't happen soon enough.

  The same thing happened to me this morning. Take the watch off the charger, then press the side button for 30 seconds, or until it turns off. Press the button to turn it on. Although mine is 100% when it was frozen, he was charged only to 30%. I then, after power on it, loaded and it works very well at the moment. I also uninstalled an application of watch face that I had added yesterday to see if it was the culprit.

• Cursor jumps across the screen.

  While trying to navigate around my screen with my mousepad to laptop, the cursor jumps randomly offline.

  • ex: when you try to click on the scroll bar (on a Web page) at the bottom of the page, the cursor jumps to the top of the page.
  • ex: on the desktop, I'll move the cursor over an icon, and the cursor will move to a random point on the screen and continue to move in the direction my finger, said that on a new path.
  • Sometimes, the slider works very well.
  • The problem occurs when you use any program.
  • I don't have the problem "while typing, my mouse moves and clicks on".
  • The movement is just a quick jump from point a to point b. (not rapidly moving around screen clicking everything)
  • If you need more info leave me a message.

  Specifications of the computer:

  -Laptop computer Dell: Latitude D620

  -Race: Service of Windows Xp Professional Version 2002 pack 3
  -Computer: Genuine Intel(r) CPU

  @1.83 GHz T2400
  987 MHz, 1.00 GB of RAM

  Properties of the mouse:

  Typical laptop mouse (the one under the space bar on the keyboard)

  Driver Date: 7-1-2001

  Driver version: 5.1.2600

  Thank you

  Rollwtide88

  This can occur if your version of windows is not genuine. Please call Microsoft for even better your current situation.