cursor problems

Similar Questions

• Mouse cursor problem

  After a few hours, my mouse cursor gets... weird. She becomes a fatter version of himself (in his goal a bit biased as well) with multiple copies, overlapping itself in different colors. The cursor "hovering on the text" is not affected, its 'I' used remaining shape, but others, including the slider "arrow" by default and the "hovering on the hyperlink pointing to the hand" is weird. Turning on the traces of the mouse leaves a copy of the weird arrow cursor, but the normal mouse comes back and works well.

  So, basically, how to avoid this strange, large, multicolored, slider which came into existence, and the case of activation of the traces of the mouse * is * the only way to turn it off, how can I get rid of the weird, big, multicolored cursor unsightly that lingers on my screen? Virus scan has not turned up all wicked. Would it be a specific program (it's a gaming computer and not all games are perfect...) which irritates my computer in a certain way and results do?

  NOTE: I use a special gaming mouse or anything like that. It's a Dell which came with a (different) computer that I got years ago. Device Manager indicates that the drivers are up to date. I don't think it's a problem with this mouse especially, but I have no real way to check a different mouse on this computer without having to buy one.

  Thanks for reading.

  I'd be willing to bet that it's your video card driver.  My Dell has an ATI video card and it happens sometimes.  I have a graphics card dual monitor and oddly enough happens that on my primary monitor - display of the cursor on the screen 2 is not affected.

  ATI made a patch for cursor problems, unfortunately the Dell that I use is in a corporate environment and they did not find enough critical to give me the patch again.

  You could try the Dell support page, go to the downloads section and make sure you have the latest video card driver.

• Focus cursor problem: I can't get my cursor will appear in a search box

  Original title: Focus cursor problem

  I can't get my cursor will appear in a search box (e.g., Google, amazon.com, etc.) in Firefox Version 16.  It seems to be a kind of focus problem.  Is it a Firefox problem or a problem of Windows 7?  Could this be a script problem?  Thanks for any ideas on how to solve this problem.

  Hi Letaiyo,

  You are welcome.
  
  I am happy to learn that the problem is solved!
  
  Your efforts to solve this problem is appreciated.
  
  Thank you for sharing your information on the way in which you solved the problem.
  
  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.
  
  Thank you.

• Windows 7 displays the error message when you exit + cursor problem

  Two issues here. Phoshop CS5 on Wind 7 64-bit.

  Number of physical processors: 8
  Processor speed: 3073 MHz
  Built-in memory: 12279 MB
  Free memory: 9577 MB
  Memory available to Photoshop: 10934 MB
  Memory used by Photoshop: 80%
  Tile image size: 128K

  First issue is since the last update automatic Adobe (why fix what is not broken?) Whenever I go out now Photoshop I get the message "Server QT Adobe has stoped working" and sometimes when I go out the bridge. InDesign behaves as evil. I can no longer start a previous document in the file without ID Manager crashing on.

  The other is the sliders in the Clone and delete lose their advantage (become invisable) without any reason - well not quite. Noise Ninja crashed in Photoshop when I tried to use it. I reinstalled it and all is well. The issue of cursor seems to be intermittent but came back (for no reason), after that I reinstalled NN. I can't seem to change the cursor, no matter what I do. The problem now seriously affect how I work. Almost any return to Win XP, who ran perfectly in Photoshop CS5.

  Any help will be accepted with gratitude.

  Doug

  Cursor problems are known to be caused by outdated video drivers (nVidia).

  Assuming you have a nVidia (which model?) video card, go to their web site and download and install the latest video drivers for your card.

  Also, this could very well solve your crash.

  Don't forget the video drivers to apply the OpenGL system, on which Photoshop relies heavily.

  -Christmas

• Libretto W100 cursor problems

  Hello

  I have a lot of problems of cursor on a new Libretto W100. Using the field courses on the display it move it in the opposite on the top of the screen. Then I go to the right below, the cursor moves in the direction towards the top left. The only way I found to stop this problem is a full reboot. And then it works OK, but when I close the lid and leave it alone for two hours, for example, come and activate the problem reappears. I especially don't even touch screens to avoid confusion between the machine. But I can reproduce it consistently.

  Very annoying. Any seen elsewhere or have a solution?

  Kind regards
  Wim.

  Hi Winm

  Since when you noticed this behavior? On the first day?

• cursor problem chart xy

  Hello

  I have a weird problem with cursors on XY graph. I can't get the cursor and even when I put manually the value of X in the legend of the cursor, the cursor sometimes go to go to this value of X. And the question is very intermittent. The sliders sometimes operate without any problem and sometimes I can not enter and move them.

  I have attached the vi here that I'm having a problem with. Could someone take a look and let me know if you also have the same problem as me. See if you can move the sliders, snap the cursor on different plots and always able to move the sliders.

  Thank you

  LVCoder

  OK, I found the problem with the bizarre behavior of cursors. It is because of the free third sliders whose value is set by program. Because I set its value equal to the difference first 2 sliders, its value can be a higher value of the negative due to which the sliders do not behave properly.

  To solve the problem I am remove the third cursor and place 2 digital indicators on the front panel to show the delta between 2 sliders

• Keyboard/cursor problems.

  I have an ASUS E - pad Transformer 101. As I type on my keyboard, the cursor continues on to go somewhere else on my screen, so that if I'm not careful, I will be typing in somewhere else. It is very annoying... If someone has had this problem or know why it continues to be now?

  It is a very common problem when users become familiar with a new laptop. Either your palm/wrist/cuff/bracelet is touching the touchpad as you type or the touch pad sensitivity is set too high and reacts to strong strikes.
  • Someone to watch you while you type to see if you are brushing the laptop touchpad inadvertently.
  • Go to the control panel mouse configuration and reduce the sensitivity of the touchpad.
  • Make sure you use the latest version of the driver from the manufacturer of the laptop for the touchpad and update if a new becomes available.
  • Some laptops allow the option to disable the touchpad while typing is performed.
  • Disable the touchpad entirely in favor of a wireless laptop mouse.
  As noted previously, this is a very common problem and users are usually completely unaware they do even when it is pointed out to them.

• drag cursor problem

  Hi all

  I have some problems playing with movement of the sliders.

  In my application, I have a chart with 2 sliders. There is 1 primary cursor (black color) that can be moved can on the chart. And another (in green) cannot go to the left of the black.

  On 'Move cursor' (green) event, whenever the value of the cursor X is less black, I do value let slip false. But it's not working.

  Could you pls look at my Vi and suggest me a solution.

  Thank you

  Ritesh

  Sorry, of course you should get the x directly from the terminal event. No need to ungroup.

  

• Help running SimCity 4 on W7 64 bit pc / cursor problems

  Hi all - I have a brand new custom HP 450 t. Intel CPU quad core i 870 and 2BG GPU Radeon HD 5570. 8 GB of ram.

  I'm a * die hard * SimCity 4 players and you have installed the disk 1 and 2 on my machine without problem. During my 1st game play, the cursor passed its form of arrow normal to a line about an inch long, smooth on one side and rigid, model triangle on the other. All the features of the mouse has stopped at this stage. The cursor is then in a square, about an inch in size with pixels of colors of the Rainbow and still not the possibility to click or select anything. The task manager has been the only way for me to close the game.

  I ran SC4 on our house built 8 years without ever a problem (XPpro) pc. Even for a short time, I start the game on my Vaio laptop, with the only question being incredible RAM consumption resulting in the gameplay being too slow to even bother.

  But I've never seen this kind of problem before. I have not yet tried. After reading online compatilbility issues possible between SC4 and W764bit, I'm not sure how to proceed. Yes, I know Microsoft site advises that SC4 IS compatible. But I really think that if this was the case, so many hundreds of users would not be have reported problems on this forum as well as others.

  Any advice on the question of whether I should even bother, stuff, tips would be greatly appreciated. Thank you very much!!!

  Hi aenflex,.

  Through my research, I found that SimCity 4 is companies; Please correct me if that's wrong.

  Windows 7 says SimCity Societies Compatibility Center is not not compatible and if the game maker

  Windows 7 Compatibility Center

  EA requirements

  Method 1: You can install the update is available for this game and see if that makes a difference

  Update available for SimCity 4, install and check to see if the problem persists

  http://support.EA.com/app/answers/detail/A_ID/223/kW/SIM%20City%204%20system%20requirments

  Method 2: You can follow the steps described in the article below

  Troubleshoot display with Microsoft games

  http://support.Microsoft.com/kb/263039

  (Article apply to Microsoft games, steps for other games)

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP 1010 a 320 touchscrreen: cursor problem touch screen model 3201010a HP

  Hello

  I had a touch screen 320 HP 1010-a computer model of office. I hurt me with the departures of cursor.it movement crazy everything in a sudden.it seems that someone starts to control the other place.all open webpage start moving cursor will disappear and the cursor move still crazy. Any suggestions to fix this? Furthermore, I don't know much about computer. Thanks in advance.

  Hi @mechpilot, thanks for your help. I appreciate your help. Anyway, someone here in this forum had the same problem and he has found the solution... I applied the solution and it's been 3 days I have no problem... it's here...

  Go to the MANAGER of DEVICES

  find The DEVICES of HUMAN INTERFACE

  search for HID-compliant touch screen

  Right click and select Disable.

  Thanks for your help.

• Microsoft Windows Vista cursor problem

  I'm having a problem with the cursor in Windows Vista.  If I let the cursor sit in a text box or a spot on a document, I'm typing, the cursor automatically "jumps" to this place.  If I'm not on the screen I have typed several convictions in the wrong place or if I type a user name and password, the cursor will break again in the user name box and my password is registered at the end of my user name.  Is there a setting where I can change this doesn't happen?

  Hello

  Control Panel - mouse - uncheck the default position and watch the other parameters.

  Some programs also have similar controls/assets.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Pointer / cursor problems

  My cursor/pointer works fine except that I get the circle of rotation now constantly.  The system is not "hung" but rather just the "arrow", the circle of rotation is here as well.  Need help.

  Hi WRGasior,

  1. have you made changes on the computer recently?
  2 does the problem occur when you open any perticular programs or all programs?

  I suggest you perform the clean boot and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

  More information
  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-mouse-settings

  Make the mouse easier to use
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-the-mouse-easier-to-use

• Windows 7 cursor problem.

  At the start, my cursor looks like and acts normally. But after some use, IE. display Web pages, folders, opening, the size of the cursor is growing! Although in the properties of the mouse - pointer, he says that he is currently using the system windows aero system, it seems as if his appeal to the schema of the extra-large system. And if I change my pointer to this plan, the cursor appears even more great. He returned to its normal size after a reboot, but eventually the problem comes back.

  What graphics card you have? Is the ATI Radeon...?

  You can also read this topic: huge mouse under Windows 7... pointer

• Echo of cursor problem

  I had problems with an application that I have loaded on my Windows 7 laptop. I removed it.

  Now I have problems in every application on the PC that involves text entry.

  When I type a character the cursor is always returned to the right place.  So when I type more I crush or even delete the text.

  Hello

  Thanks for posting the request in the Microsoft community forums.

  I understand that the cursor is not in the right place after typing characters. Please answer the following questions.

  1. What is the brand and model of the laptop?
  2. using a mouse or a touchpad?

  To resolve this problem by following the advice given:

  Method 1:
  You can check if the problem occurs in safe mode.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2:
  If you use a mouse, then you can try to reduce speed and other options for the mouse pointer and check.
  Check out the link.
  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Method 3:
  You can also try to set the mouse pointer to hide when you type. Here are the steps:
  a. open the mouse by clicking the Start button, click on the Control Panel, clicking hardware, and then clicking on the mouse.
  b. click on the pointer Options tab and then do one of the following:
  c. uncheck box hide the pointer while typing of box.

  Method 4:
  You can also uninstall and reinstall /touchpad mouse drivers and check.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 5:
  If you are using touchpad you can reduce the sensitivity of the touchpad and check.

  a. turn on your computer and log in to Windows as usual. Open the "Start" menu and click on the "Control Panel" option.

  b. double-click the icon named "Mouse"... The "Mouse properties" window opens. Go to the tab "device settings". Click on the button "settings". A window titled "Properties" appears.

  c. examine the left panel of the 'Properties' window and expand the option "sensitivity." Click on the option "Sensitivity to touch."

  d. reduce tactile sensitivity in moving the slider to the right, to the label of "heavy touch. Experiment with different levels of sensitivity until find you one suited to your needs.

  e. click the 'OK' button to close the "Properties" window Repeat the operation with the control panel "mouse". Your new touchpad sensitivity settings are now saved.

  We know if you need help with the issue of cursor. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

• BlackBerry Smartphones cursor problem

  My Web slider does not work? When I go to google.com for example, my cursor allows me to click in the search bar, but when I click on "search", it won't let me. It is the same for all sites. I can't "click" on the links or anything. Anyone know what is causing this problem or how to fix it?

  Thank you

  Your options are enabled in the browser?

  When the browser is open, press the menu button and select Options.

  Then go to the Configuration of the browser.  Check all the boxes.  Additionally, make sure that the Identification of the browser is set to "BlackBerry".  Save the settings.

  If it still does not work, try to remove the battery to reboot the device.