Custom problem race workspace via the SSL protocol

Similar Questions

• Problem with JMS via the SSL protocol in clustered environment

  Hello
  
  We run Weblogic 11 g Cluster (area) which consists of admin server and two managed server MS1, MS2.
  LIKE and run it on the computer 1, MS1 MS2 runs on machine 2. Both machines have two network interfaces, a public used for client connections and an intern for cluster communication, monitoring etc. The default channel of each Weblogic Server is listening on the internal network interface, and Moreover we have two channels (for http and t3 Protocol) configured to the public interface.
  The two managed servers are JMS provider and there is a JMS Module myModule in the field with the following JMS resources: custom connection factory myConnFactory (Load Balancing active = true = false server affinity, target: entire cluster JMS) and myQueue, which is a uniform distributed queue (targets: MS1, MS2). The queue is accessed by its logical JNDI name, but she is stuck on each managed server.
  
  JMS communication flows normally through t3 dedicated listening on the public interface. However, a new external client will send messages to myQueue and communication must be encrypted for security reasons. For this reason, we have implemented SSL. Instead activate a DefaultSecure channel, we left 'SSL listen Port active' = false (as the default channel would be linked to the internal network interface) and created a new channel T3SChannel t3s Protocol on the public interface for incoming client connections.
  
  The customer creates a t3s connection to the cluster (through T3SChannel) and gets the factory connections and the queue, use the JNDI ( source) search. The JMS connection is in real-time with MS1. If we want to create two consumers for this queue, the consumer of fist is created the MS1 and the second will be created on MS2 (thanks to active balancing). However, the creation of the second consumer fails with an exception (it is thrown on the client):
  
  java.rmi.ConnectException: no valid port known for: "DefaultSecure [t3s]: t3s (t3s): mserver1 - internal .company .com: 56213:null:-1 ';" No router available at destination
  at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:464)
  at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:396)
  at weblogic.rjvm.RJVMImpl.ensureConnectionEstablished(RJVMImpl.java:303)
  at weblogic.rjvm.RJVMImpl.getOutputStream(RJVMImpl.java:347)
  at weblogic.rjvm.RJVMImpl.getRequestStreamInternal(RJVMImpl.java:610)
  ... 18 more
  
  We were told that the exception can be avoided with t3s < default protocol > - < / default protocol > element (default is t3) added to the config.XML in the Weblogic domain. If we configure t3s as default protocol, we also need to activate the DefaultSecure channel on each server and then everything works and the customer is able to correctly create consumers.
  
  However, as a side effect, the entire cluster on weblogic.rjvm communication layer and then by t3s. We do not want that because internal cluster communications are set enough with other methods and it will have impact on the notable performance in the production environment. In principle, it should be possible to enable the external client to connect to the JMS provider via the channel new, safe, without affecting the existing internal communication in the cluster (which should be a black box for the customer).
  
  My question: is it possible to run the example described without defining the default protocol to t3s?
  
  Thanks for the reply.

  My question: is it possible to run the example described without defining the default protocol to t3s?

  Thanks for the very clear problem description. I checked with our customer support guru and I'm sure that the answer to your question is no, I think you have encountered a known problem and have already struck with the recommended workaround.

  That said, you can be able to avoid at least partially the problem by setting "server-affinity = true" on your CF. as you probably well know, affinity = false encourages consumer and producer traffic to route customer, on its server host connection, then possibly on a "second leap" to another server in the cluster. It looks like the attempt of an implicit downgrade of a secure request origin SSL in the first bond on a channel not secure in this second jump is to throw the exception.

  HTH,

  Tom

• BlackBerry, call web services via the SSL protocol

  Hi guys,.

  We are developing an application BlackBerry to OS 4.1 and we test it on the 8330.  This application calls several web services on a remote server via the SSL Protocol (side).  There is a valid certificate from Entrust installed on the remote server - it works properly with all major desktop browsers.  The certificate has not been installed on the BES - is it necessary?  Some BlackBerry devices will be linked to a company BES, others not.

  When the application calls the web service, a window opens with the following message: "you try to open a secure connection, but the server certificate is not approved."  Continue to push works fine, but the window opens again a few moments later.  Pushing view certificate indicates that the certificate is considered invalid ('unverifiable Cert chain').  The same information is given when you navigate to the certificates of the aircraft.  Certificate trust pushing watch a 2nd window asking you the key Store password, which we are not aware of.

  You guys can help us with this?

  Thank you!

  We have solved the problem.  It seems that the BlackBerry device is having a hard time with a certificate signed by the Entrust 2048 bit root certificate.  Give us a new intermediate certificate signed by their 1024-bit root certificate, which we have installed on our Apache server.  While the window 'certificate is not approved' arises at once, pushing "Continue" worked and it never came up again.  To do this, it will probably install the certificate on the BES, something we don't have yet.

  Thank you for taking the time to answer!

• How to get the JSP to transmit a request via the SSL protocol?

  I'm new to JSP and servlets, although I worked with Java for a long time. I am writing a registration system and connection of single user to teach myself JSP. I want to put things up so that the user is able to connect securely over https. I don't know how to do this, however. There seems to be no place in the relative URLS to indicate that you must send a request via the SSL protocol. I've got sample page to login below - someone knows how to change it so that it happens safely?
  
  Also, do I need to install a certificate on my web server?
  
  index.jsp

  <html>
      <body>
          <h1>Index</h1>
          <a href="login.jsp">Login</a>
      </body>
  </html>

  Login.jsp

  <%@page contentType="text/html" pageEncoding="UTF-8"%>
  <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
     "http://www.w3.org/TR/html4/loose.dtd">
  
  <html>
      <body>
          <h1>Login</h1>
  
          <jsp:useBean id="userLogin"
                       class="com.kitfox.webrpg.UserLogin"/>
          <jsp:setProperty name="userLogin"
                           property="*"/>
  
          <%if (userLogin.isValid()) {%>
          <jsp:useBean id="userId"
                       class="com.kitfox.webrpg.UserIdent"
                       scope="session"/>
          <jsp:setProperty name="userId" property="*"/>
  
          <jsp:forward page="index.jsp"/>
  
          <%} else {%>
  
          <form action="login.jsp" method="post">
              <fieldset>
                  <legend>Enter login information</legend>
  
                  <label for="login">Login</label>
                  <input type="text" name="login" value="${userLogin.login}"/> <br/>
  
                  <label for="password">Password</label>
                  <input type="password" name="password"/> <br/>
  
                  <input type="submit" value="submit">
              </fieldset>
          </form>
  
          <%}%>
      </body>
  </html>

  The first step would be to install an SSL certificate on your web/application server and ensure that it works.

  You can add something like the following to your web.xml file to automatically switch to https

  
    
      Secure Login
      /login.jsp
    
    
      CONFIDENTIAL
    
  
  

• Several clients that connect to the same user via the SSL protocol

  It's possible? I can't find any documentation about it. Essentially, because of the way our system has been designed, connect us the two our system and our front-end web server to the same processing back-end user. Now, we have an obligation to use PKI/SSL to connect users.

  I have experimented with OWM and the TCPS, and was finally able to get a connection between Client1 and the server a user to test called PKI_TEST. The problem is that I get an ORA-28860 error when I try to connect Client2 to the server to the same user. I tried to import the Client2 certificate into server's wallet, but which is perhaps the origin of the problem. So here are my thoughts/questions.

  1. how to import the client certificates in the server with the same CN wallet? Seems to be a 'no', but maybe I am doing something wrong.

  2. can I import certificate user of Client1 Client2 portfolio so Client2 performs authentication by using the same certificate that worked for Client1?

  3. can I copy portfolio of Client1 to Client2 so Client2 uses the same portfolio that has worked for Client1?

  4. can I associate a single user with multiple CNs for the client certificates will be different in the wallet of server?

  Any help would be appreciated.

  Hello

  You can just copy the client1 client2 on portfolio, so the client2 can connect / authenticate over SSL to the same DB user.

• SG300-28 import self-signed SHA2 certificate to the SSL Protocol (including the format? How do I?)

  1. What is the format a certificate and private key combination should play during import to use SSL?

  2. how actually import you - via CLI or web interface.

  I'm trying to import an SSL certificate that is self-signed in the SG300-28 to secure the connection to the web interface of the switch. The certificate is signed by my own 'certification authority' / custom root certificate.

  I tried to do it via the graphical interface of web management (security > SSL server > server SSL authentication) and the command-line via SSH. I will detail my exact process below. I had no problem importing a certificate created in the same way to the Cisco RV320 router, although the web interface is different.

  How to create a certificate that is accepted by the switch?

  (Image Active) firmware version: 1.4.0.88

  My approach:

  1. OpenSSL 1.0.1f January 6, 2014; on an ubuntu 14.04 machine
  2. Create my own, certificate of self-signed root:

   openssl genrsa -out rootCA.key 2048 openssl req -x509 -new -nodes -key rootCA.key -days 3650 -out rootCA.pem

  3. create a private key and the real certificate and sign them using the rootCA.pem:

   openssl genrsa -out switch.key 2048 openssl req -new -key switch.key -out switch.csr openssl x509 -req -in switch.csr -CA rootCA.pem -CAkey rootCA.key -CAcreateserial -out switch.crt -days 3500

  for later use, export the public key of the switch.key - file using

   openssl rsa -in switch.key -pubout > switch.pubkey

  4. open the web interface of the switch and check for the SSL settings (Security > SSL server > server SSL authentication).

  4.1 click "import certificate".

  4.2 paste the contents of the switch.crt file in the ' certificate:'-textbox

  4.3 to import pair of RSA keys

  4.4. Paste the contents of the switch.pubkey file in the public key field

  4.5 by selecting the 'Clear text' radiobutton control and paste the contents of the inside switch.pubkey

  4.6 click 'apply '.

  4.7 receive an error message 'invalid key head '.

  The private key looks like this (oviously, I created a new one for this example):

   -----BEGIN RSA PRIVATE KEY----- MIIEpAIBAAKCAQEA3gOvNzKqULXnT7zL9fl4KJAZMo5eYHfwPSN0wl385na37oHz [23 more lines truncated] aB7Pooa60anjIVJmlSIp4WJ8U+52BMKJZ5rqHnJ1sBBo1zpAtcdspg== -----END RSA PRIVATE KEY-----

  I also receive a header invalid key error when you try to import the private via CLI SSH key using:

   switch(config)#crypto key import rsa

  I also converted the certificate and the private in PKCS12 and then back to the PEM key that gives me the following private key "head" which is not always accepted when pasting in the CLI:

   Bag Attributes localKeyID: FE 24 88 34 66 BE E9 DB CE 4E 91 23 2C 0E 03 B1 A7 58 32 24 Key Attributes:  -----BEGIN PRIVATE KEY----- MIIEvgIBA[...] -----END PRIVATE KEY-----

  What key header miss / what am doing wrong in general?

  It seems that ' import key cryptographic rsa "command is not suitable for import SSL key related private, but rather for the importation of SSH keys. Code "key header is missing" means that switch expects anything other than "-----BEGIN RSA PRIVATE KEY-----", for example the headers that you can see after the execution of ' view keys cryptographic rsa "(- START PRIVATE KEY ENCRYPTED SSH2-).

  To get your SSL certificate installed, you have two options:

  The CLI option:

  • create a RSA private key with command

   switch(config)#crypto certificate 2 generate key-generate 1024

  • create the certificate request with

   switch#crypto certificate 2 request

  (don't forget to provide all information for this order, including '' cn '' and so on). Note that this command must be executed inside the privileged mode and not in mode configuration as the previous command.

  • After you run this command, you'll get sign certificate request (CSR). Copy and paste it into the new file on the server that hosts your certification authority.
  • now sign this CSR file with the command that you have already used:

   openssl x509 -req -in switch.csr -CA rootCA.pem -CAkey rootCA.key -CAcreateserial -out switch.crt -days 3500

  • After signing to just open the file "switch.crt" and copy all content between BEGIN and END section including.
  • and import this certificate with order

   switch(config)#crypto certificate 2 import

  • and finally for your certificate to be active, do it with the following command:

   switch(config)#ip https certificate 2

  WebGUI option:

  Here, the procedure is similar to the CLI:

  • You must click on "Generate certificate request" in the "Security-> SSL server-> server SSL authentication" section, fill in all necessary data and click on "Generate certificate request."
  • you will get CSR data you need to paste into the server with the certificate of the CA.
  • sign the certificate with the command openssl similar as mentioned previously
  • and import a certificate with maintaining "import RSA Key-Pair" unchecked.

  Personally I've never managed to get imported both key and certificate from the outside.

• Canon printer does not connect via the IPP Protocol

  I work in a company that sells printers offices/schools/etc. Yesterday, we received a call from a customer indicating that the Copier, we sold them connected not to a new computer they bought.

  I went to the site and noticed that the computers in question were all purchased during 3 months and all loaded with Mac OS X El Capitan. Most was registered on 10.11.3, and some 10.11.2 and 10.11.1. All computers work turned Yosemite.

  We receive a message somewhere in the sense of "Communication error. This printer may not be able to [print], you want to save it anyway? »

  It was a cannon imageRUNNER Advanced C5235. The client declares that if he saved the printer, it would not be able to print, but would still see jams paper, messages and other statutes of the computer printer toner. After attempting to remove and reinstall the printer using the most recent driver available on the Canon Website, we received the same error, the customer received. We escalated it to Canon support, who asked us to choose LPD instead of the PPI for the Protocol, allowing the printer to you connect and start printing on all devices running El Capitan.

  After further research, to my knowledge, the ISB is more recent and has more features that the LPD, although I couldn't find much on it so I was uncertain about the origins of these two protocols, except that they were introduced in the 1990s. I know it's kind of vague, but is better/more recent than PPI LPD? If so, great. Otherwise, is there a way to solve this problem and get computers that run El Capitan to connect correctly using IPP?

  The problem here is that the driver Canon UFR2 or PS that was used on the Mac to print in ADVANCE of Canon C52xx does not support PPI. This is why you must use an alternative Protocol.

  Note that it is possible to print to the C5255 using the PPI, but you need to use the Canon PPDs which means the copier must have the kit installed Postscript printer and you get not the pretty picture base views the pilot UFR2 and PS to give you.

  Second point is that the Canon UFR2 and PS drivers, it is preferable to use HP Jetdirect-Socket to the LPD protocol. He sent larger packets and verifies the status of the target unit - LPD simply sends data to the fixed IP address so if the printer has a problem you don't get this information until you walk up to the photocopier.

  I hope this helps. Answer if you need more information.

• Problem creating DEV_PORTAL via the remote control

  Hello
  
  I would really appreciate your help to meet slot problem:
  
  in OBIE11g when creating patterns via the remote control, all the patterns, I chose to be created are working well except DEV_PORTAL, which throws the error
  
  SQL error when connecting with thin driver (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST=HOST_NAME) (PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = SERVICE_NAME))): ORA-01017: invalid user name password login denied
  
  The problem is this role/user/password is correct, because:
  
  1 other patterns are created by using the same credentials (with SYSDBA rola)
  2. I can connect (via SQL developer) to database using the same settings and everything works
  
  I encountered a similar problem on the forum under
  
  Creating DEV_PORTAL schema for Oracle Forms
  
  but without any solution working :(
  
  Thanks in advance

  Why you install DEV_PORTAL scheme, for the installation of obiee 11g select Oracel Business Intelligence in the performance of the remote control. It will install only two MDS and BIPlatform patterns.

• Failed to configure Acrobat to connect to LiveCycle RM due to the SSL protocol error

  I get the following error when I try and configure Acrobat to connect to the LiveCycle RM server.

  Unable to connect to the service at the: < host > https://: 443

  SSL protocol error.  Certificate is either not valid, or the common name or authority are not recognized. If the problem persists, contact an administrator.

  When I configure SSL on JBOSS, we used a certificate self-signed using the keytool JDK.  I can confirm that SSL is correctly configured on JBOSS.   Type < host > https://: 443 in a browser that brings me to the JBOSS page.  Also https:// < host >: 443/edc opens the user interface rights mgmt.

  This means, I won't be able to test without a real cert of a like Entrust certification authority?

  Also, what is the name of user and password in the settings menu?  Is a login in livecycle?  or for the cert?

  You must ensure that the host (443https://) is the same as the one you specified when you created the keystore. Do not use localhost.

  Jasmine

• Problem after connecting via the USB port of the printer. Error 0x0000007a

  Recently, I plugged my HP Deskjet2360 printer via the USB port on my HP laptop (running w7 Home premium 32-bit) and can not print at all. When I try to print a test page I get the following message ' operation could not be completed. Error 0x0000007a. Operation failed.

  My usual Setup is to have my printer connected to my desktop (Windows XP Pro). My HP laptop is connected via a wireless connection to my home network, which is also connected to my desktop computer. Of course, this means that I have the office turned on to be able to print from my laptop.

  Everything worked great until I decided I'd rather have my connected printer to directly to my laptop via USB.

  When I connect the printer via the USB port on my laptop, windows installs the software and reported no problems. Yet when I try to print a test page, I get the mentioned error. When I then reconnect the printer to the desktop and try to print a test page to my network, I get exactly the same error message. The office and the printer still work fine, it's just that I can't print from my laptop.

  I uninstalled and reinstalled the printer on my laptop with the USB connection and the network, but it still does not work. The resolution of the problems on the laptop reported no problems, and the printer is set as default printer. I also get an another error msg when I click on the Preferences button in the printer properties: address of the 0x5aeba4f1 function caused a protection fault. (code 0xc0000005 exception) Some or all property pages cannot be displayed.

  
  

  The only way I found to get around this is to use windows restore and restore my laptop before the point when I connected the printer via the usb port.

  Any suggestions?

  Hello
   
  This error 0x0000007A describes the data area passed to a system call is too small. ERROR_INSUFFICIENT_BUFFER
  You can try to uninstall and reinstall printer driver and check if that helps.
   
  Here's how you can do:
   
  1. open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features.
  2. Select a program and then click on uninstall.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  http://Windows.Microsoft.com/en-CA/Windows7/remove-unwanted-programs-from-your-computer
   
  After you have uninstalled the driver to restart the computer, this should install it the appropriate drivers for it. You can also try to download the latest driver from the manufacturers website and install it.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1101015&lang=en&cc=us&TaskID=135&prodSeriesId=1101113&prodTypeId=18972
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
   
  Kind regards
  Umesh P - Microsoft Support

• Problem of forms via the "submit" button

  I am distributing a PDF via Microsoft Outlook and then compile the answers on my local server.  However, when participants click on 'submit', there is an error in the script that causes Outlook give me this message:

  

  Any help is very appreciated!

  J. Klaybor

  Hello

  No problem. Just open the Script Editor in the designer of the LC (if not already open). Window menu or F5.

  

  Drag to the bottom of the window (if it's only to show a single line), so that you can see several lines.

  Should be good to go! You can then the script against different manifestations, etc.

  Niall

• Cisco ISE 1.1.2.145 Admin authentication via the LDAP protocol

  I have configured the LDAP protocol and able to retrieve our LDAP directory structure. Now, I'm trying to point authentication "Admin Access" Source 'External identity', which is the new LDAP IS I created. But I couldn't find an option to authenticate locally if for some reason the LDAP configuration does not work. I learned that the ISE can automatically return to local auth as external sources Idenitity are inaccessible. How can I test the LDAP authentication with breaking them our Admin Access? I thought to open two parallel sessions, one with Super Admin account Local and one with the domain account. But I noticed that ISE communication is smart enough for the closing session/connection no matter what other sessions in different browsers so, basically, I can't open two parallel sessions the same machine to test. Suggestions? or am I missing something here?

  Thanks in advance.

  Hi Srinivas,

  Even if you configure LDAP as a source of external identity of admin access, you can always internal relief without having locked. According to the ISE user guide:

  During the operation, Cisco ISE is designed to "fall back" and try to perform the internal identity database authentication, if the communication with the external identity store has not been established, or if it fails. In addition, whenever an administrator for which you have configured external authentication launches a browser and initiates a logon session, the administrator must still the option authentication of demand through the local Cisco ISE database by choosing 'Internal' to the Selector drop-down storage of identity in the Connect dialog box.

  http://www.Cisco.com/en/us/docs/security/ISE/1.1/user_guide/ise_man_identities.html#wp1351543

  Please see the attached screenshot by my lab ISE:

  

  I configured the admin authentication against AD, but I still see both 'Internal' and 'AD' at the time of the connection.

  I hope this helps.

  Thank you

  Aastha

• Problem installation ALCE via the extensions Manager

  Try to install ALCE via the extensions Manager to the latest version of photoshop CC but get message saying "extension cannot be installed. It requires Photoshop 13 or more. Any advice?

  Please refer to this topic: Add it will not install

• Problems to connect via the Cisco VPN client IPSec of for RV180W small business router

  Hello

  I tried to configure my router Cisco of RV180W as a customer VPN IPSec, but have encountered a problem that I hope someone can help me with. "" I managed to do the work of configuration so that the Cisco's VPN IPSec client authenticates successfully with the XAUTH user, I put on the router, but during the negotiation, the client ends with the following, which appears several times on the router error message: ' Mar 20 Oct 19:41:53 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [34360] has no config mode.

  I've read around the internet and a number of people seem to say that the Cisco VPN Client is not compatible with the router, but the same thing happens to my iPhone VPN client.

  Is it possible that this can be implemented? Below, I have attached the full configuration files and the log files. Thank you much in advance.

  Router log file (I changed the IP addresses > respectively as well as references to MAC addresses)

  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: floating ports NAT - T with counterpart > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] WARNING: notification to ignore INITIAL-CONTACT > [44074] because it is admitted only after the phase 1.
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [4500]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received unknown Vendor ID
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received Vendor ID: CISCO-UNITY
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT detected: is located behind a device. NAT and alsoPeer is behind a NAT device
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: request sending Xauth for > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association established for > [4500] -> [44074] with spi =>.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REPLY' of > [44074]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: login successful for the user "myusername".
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser connected from the IP >
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: sending of information Exchange: Notify payload [10381]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REQUEST' of > [44074]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: ignored attribute 5
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28683
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28684
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: remove the invalid payload with doi:0.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: purged-Association of ISAKMP security with proto_id = ISAKMP and spi =>.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser Logged Out of the IP >
  Mar 20 Oct 20:03:16 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association deleted for > [4500] -> [44074] with spi =>

  The router configuration

  screen_shot_10-20 - 15_at_09.00_pm.png

  

  IKE policy

  screen_shot_10-20 - 15_at_09.00_pm_001.png

  

  screen_shot_10-20 - 15_at_09.01_pm.png

  

  VPN strategy

  screen_shot_10-20 - 15_at_09.02_pm.png

  

  screen_shot_10-20 - 15_at_09.02_pm_001.png

  

  Client configuration

  Hôte : < router="" ip=""> >

  Authentication group name: remote.com

  Password authentication of the Group: mysecretpassword

  Transport: Enable Transparent Tunneling; IPSec over UDP (NAT/PAT)

  Username: myusername

  Password: mypassword

  Please contact Cisco.

  Correct, the RV180 is not compatible with the Cisco VPN Client.  The Iphone uses the Cisco VPN Client.

  You can use the PPTP on the RV180 server to connect a PPTP Client.

  In addition, it RV180 will allow an IPsec connection to third-party customers 3.  Greenbow and Shrew Soft are 2 commonly used clients.

• Problem reading data via the Bluetooth Serial Port

  My request is meant to connect with a PC via Bluetooth.

  The PC runs a simple server that reads a string from the BlackBerry UTF and writes a UTF string in response.

  DataInputStream istream = connection.openDataInputStream();DataOutputStream ostream = connection.openDataOutputStream();
  
  System.out.print(istream.readUTF());
  
  ostream.writeUTF("Hello client");ostream.flush();
  
  ostream.close();istream.close();
  

  The sound written BlackBerry pin and reads the answer.

  DataInputStream istream = connection.openDataInputStream();        DataOutputStream ostream = connection.openDataOutputStream();ostream.writeUTF(Integer.toString(DeviceInfo.getDeviceId(), 16));ostream.flush();
  
  _rtf.insert(istream.readUTF());
  
  ostream.close();istream.close();
  

  The server reads and prints the PIN successfully, but the client raise EOFException at readUTF().

  What could be wrong?

  Solved. The server side must not empty its output stream.