Cut the speakers when headphones unplugged.

Similar Questions

• How to disable speakers when headphones unplugged

  I have a Windows 7 and I find that my helmet always come out when I'm in the library and the speakers begin to shout to the world all of a sudden everybody is looking at me or give my dirty looks like. Since then, I stopped going to the library, but it's the only place where I can concentrate and actually do the studies. I searched on google but never really found a solution. Please help me my embarrassment. Thank you

  Hello

  There is a hardware mute button somewhere on your laptop. What brand and model of the computer number you have?

  Besides the hardware button, you can cut your headphones / speakers at any time by a left click on the speaker icon on the right side of the taskbar. When the volume control opens, click on the speaker icon at the bottom of the volume slider, which will cut everything.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Always sound coming from the speakers when headphones are connected

  When I plug my headphones, the continuous sound coming out the speakers with no sound at all through the headset. When I go on manage audio devices, the helmet will appear, but it says that they're disconnected even if they are connected. I know the headset works very well because they work with my phone. I have Windows 8. What can I do?

  Hello. This is usually a driver problem, especially on models having Realtek audio.

  If you need more help please give the complete model name of the laptop.

• Re: Satellite C660: Sound through the speakers when the headset is connected.

  I have a brand new 258 C660, running on Windows 7.
  Playback device: Realtek High Definition Audio

  * Whenever I have headphones or external speakers connected via the 3.5 mm jack plug, sound still comes through the built-in distant.*

  Here's what's happened so far:

  When I plugged the external speakers were first, I was asked to choose if I had plugged a headphone or speakers. I selected "speakers" and then also, perhaps foolishly, choose "do not ask me again".
  Now, I can't to this selection again.

  Here's what I've tried so far:
  -Reboot
  -Try different headphones, try them on other devices
  -System Restore (not, for some reason any)
  -all settings via the sound control panel

  Basically, I think that I am looking for a way to disable the internal ATAPI Jack when the external Jack 3.5 mm is used.

  I am aware, there was a similar thread some time ago, but the problem may be slightly different and perhaps due to the fact that I chose "do not ask me again". At least, I hope this isn't a hardware problem...
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=241409𺼁

  Thanks in advance for any advice

  Don t think there s hardware issue.

  Try this:
  Connect the headphones.
  Go to the control panel-> Sound-> playback tab
  Here, you should see the speakers and headphones.
  Now choose the headphones and set this default value.

  This help you?

• Satellite A50 no sound on the speakers but headphones work fine

  Hello

  Satellite A50, Win Xp, its installed driver, the speakers are not silent, but when I use the headphones the sound is ok.
  Speakers do not work!
  There are two of them, I opened the laptop there are two sheets separated
  Are the speakers are down?

  But how it comes together at the same time are down?
  Is there any other configuration I need to do?

  Help, please
  Thank you

  Hello

  Maybe the speakers are not defective but the small switch located in the dysfunctions of helmet?  :|
  The little switch turns Mute speakers when headphones are connected.
  Try to move the headset jack a little bit maybe you will notice a few differences

  But just a question; you see yellow exclamation marks in Device Manager? Have you tried reinstalling the audio driver?
  If this isn't the case, then I recommend to reinstall!

• Audio comes through the speakers and headphones plugged headphones

  Audio sound plays through the headphons and speakers when headphones are connected.

  Any advice appreciated

  Hello again Nervuz,

  Thanks for the quick response!

  Based on the information you have provided, I recommend to uninstall and reinstall the audio driver for your desktop. To do this, please follow this document on follow-up with the IDT High Definition Audio Driverdownload and software uninstaller (Windows 8). If this does not work and you hear again audio to both the speakers and earphones, please follow the next step.

  The next step is to run a diagnostics using Automated Troubleshooting (Windows 8)program. This should help with the audio in question.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• How can I disable the speakers when you use headphones?

  I plug in headphones, but keeps the sound from the speakers so chromebook.

  So simple. Never took place for me to place the order. Thank you very much.

• Satellite A200-1AE: sound from speakers when headphones are connected

  Hello. Sorry for my English.

  I have problem when I started a player (winamp player or a movie or a game with the sound) and I want to change the sound from the speaker to the helmet by plug them into the headphone jack. The sound is still speaker.

  So I just restart this player or the game and then sound is switched to the headphones.

  So in sum up: when I want to listen to the sound of some player I have to plug in headphones first and then start the player in order reverse, the sound is not switched to the helmet line.

  In other laptops with Vista I have check this problem is not to happen.
  Do you have any suggestions?

  Hello Pawel

  I have the Satellite A200 too preinstalled with recovery DVDs. I was very curious and I tested it on my laptop. In my case everything was OK. Through the use of headphones, Laptop speakers are automatically TURNED off. Remove helmet speakers work again.

  I am really confused, and it is really not easy to say what the problem is here. AFAIK in headphone plug it is small, and through the use of headphones this past should disable Laptop speakers. All you can do is check if it happens after clean OS installation, maybe update the BIOS or install the latest driver sound.

  Sorry, but I don't see any other possibilities. If anything maybe you must contact the service in your country. I really can't imagine that this little mixer may be defective but service may only do a check.

  Bye and good luck!

• Try to use the speakers and headphones

  • I have a Durabrand 5.1 speaker system and normal headphones with microphone included. The speakers plug in a headphone and headset (of course). I'm trying to figure out how make my computer recognize them both at the same time. Until my recent updates I could disable my speaker and sound was still coming through the headset but either headphones now have no audio or the speakers do not have. Realtek Hd Manager doesn't seem to like them both at the same time. At the same time I didn't need the microphone turned on the headset due to having a Logitech cam with a. Any help would be appreciated.

  Hi Xerosk,

  First try to run the Audio troubleshooter built into Windows 7 and check if it can find any question and fix. Access the link below and follow the steps to run the Audio troubleshooter in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Also, make sure that the default sound device is set correctly for the audio device you are using. To set the default device, follow these steps:

  a. click on, and then type Sound in the box to start the search.

  b. click sound in the search at the top of the beginning menu.c results. Click the reading notice the check mark next to the default device. For most users, the default device is speakers. Make sure that the audio settings are configured as expected.

  Follow these steps:

  d. on the Read tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.

  e. on the Read tab, select the playback device, click on configure and make sure that the configurations are set correctly.

  f.Select the audio device you want as the default audio device and then click on set as default.

  g. click OK to save your settings and close the sound dialog box.

  Determine if you can now hear. If you can hear the noise, the problem is resolved.

  Also try to update the audio drivers supplied by Device Manager and check if it helps. You can access the link below and follow the steps to update the drivers on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also contact relatek and check if you need to make changes in the settings in Realtek HD manager for the device to work.

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Volume display shows options for the speakers and headphones

  Whenever I click on the window of the volume in the corner, it shows two sliders, one for my speakers and one for my helmet. This wouldn't be a problem if my headset work now. I plugged them (brand new, by the way) and his memory to come through the speakers. I went through the troubleshooting, searched this forum very and discovered that my headphones are the communications device by default and not to the default device. I've been trying to put my headphones by default, but it wouldn't let me, doing nothing when I clicked "Set as default". I tried to turn off my speakers, which almost worked if it wasn't the fact that now almost all the sound elements was not present at all.

  If someone could tell me how to solve this problem, or what I am doing wrong, please do so as soon as possible.

  Try the forums on the web site of the mfg of your machine, or a form by its IDT.

• The speakers and headphone devices are passed around. (speakers are now set as headphones)

  I was going through my sound settings and then all of a sudden the headphones and speakers device device swap and my sound sticks to the top and sometimes works and sometimes doesn't. Especially when im on the internet the sound does not work.

  Help, please!

  Its working properly now with the names wrong so I changed the name back to the speakers and now I hope that it stays that way

• Microsoft LifeChat LX 3000 stops the sound from the speakers when connected

  Hello

  I bought a USB Microsoft LifeChat LX 3000 headset, and when it is plugged into my USB port, no sound is heard from the speakers.

  When I disconect the speakers rund LX 3000 perfectly.

  Someone knows how to fix this problem, please

  I wanted to check if Microsoft LifeChat LX 3000 has all the entries in this section and if it has settings to enable or disable speakers when it is installed.  It is obviously the installer to work this way by default--I know not how to change the value by default if there is no entry in the audio section.

  Try to download updated drivers for your sound card - she is in the speakers and contolling the LifeChat for an upgrade can provide options that are not currently available and you should be able to control if both can work at the same time.  While you're there, download and reinstall the updated drivers LifeChat as well.

  Here is a link to the Microsoft Support - I don't know if it will be free or not (I can't go past the area enter the product id field). https://support.microsoft.com/oas/default.aspx?gprid=12368&st=1&wfxredirect=1.  If free (I'm not sure I want to pay for support) and then explain the problem and they may be able to tell an easy solution that we have lost.

  Here is a link to the product documentation that can explain what is happening and why.  Maybe it's just the way they are designed to work. http://www.microsoft.com/hardware/documentation/default.aspx?type=LifeChat&sku=JUG-00001.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• laptop computer closed off the power when you unplug

  Original title: laptop turns off

  I just replaced my battery because my only original suggested I do. Now, when I unplug my laptop with the new battery in, my computer turns off. I checked the BIOS system set in place and my adapter shows she is good, fully charged battery display and works normally. Why did the computer turn off?

  Hello

  What is the number and the model of the computer?

  It is made from material that I would say you to the manufacturer of the contact system to solve the problem.

• My audio jack is "cut", the speakers still work, but when I plug the headphones there is no sound. Help please.

  Basically, I dropped my phone on the carpet with the headphones in. Now, the audio jack is pushed inward.  What is the best way to go about fixing this problem without having to disassemble my laptop me?

  I just noticed in the title of this thread you wrote there is no noise of the taking. In this case, repositioning just decision-making may be insufficient, and the plug should be replaced. As I said, this could involve replacement of the motherboard.

• Qosmio X 770 - 11 c - how to disable on board the speakers when you use Line Out?

  Hello

  Is it possible to disable on board to intervene when the output line is used.

  Currently, if I plug in a cable to the socket of hadphone and choose alignment on the realtek Control Panel, sound is output line out as expected, but also through the internal speakers.

  Is it possible to stop this and don't have sound out through the output line?

  Thank you

  Graeme

  If you want to hear his helmet only you should choose option helmet.
  Disconnect the cable and reconnect it. When you see the small window on the screen where you can choose between the headphones and output line options choose headphones and you'll hear on external display only.

  In case you have disabled this pop-up dialog box you can activate it manually. Open the Realtek Manager connect the external device and when you see active point black on the right side make double click here and change the settings.