No installation option for CVI 2009 sdk

Similar Questions

• Cannot get the installation option for AFP 10.1

  I have a new version and install with Windows 7 and Firefox 4.0 Beta 1. I downloaded AFP 10.1 several times, but cannot install it. I get a dialog box on which the SETUP option is grayed out until you accept the contract become.  By clicking on that link takes me to a list of Adobe product licenses, select AFP 10.1 taking me in a document of 280 pages with many languages, from (I think) with Arabic. You are looking for an 'English' found nothing.  I see no way to indicate that I have read and accepted the FPLSA.  Through the links in this Forum, I found a copy in English but no way to make a link to the installation process.  I can therefore not an active installation option.  (I have not tried to install on IE 8, but there are often specific browser versions of such software and I usually use Firefox).

  I didn't see anything relevant in the Forum or the FAQ and would welcome a solution because a lot of things online requires Flash.  Thank you.

  You must click the check box next to "I have read and agree... "until the INSTALL button is enabled:

  

  P.S. I agree that the coloring on this installation panel system is terrible!

• My installation disc for windows vista has an option "fix." This option allows to reset lost passwords?

  original title: repair windows

  My installation disc for windows vista has an option "fix." This option allows to reset lost passwords? If yes how?

  Hi Martine regina,.

  We will not be able to reset the password by using the option repair; you will need password reset disk.

  For more information on the same, you can check the link below:

  What to do if you forget your Windows password:http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-you-forget-your-Windows-password

  Create a password reset disk:http://windows.microsoft.com/en-US/windows-vista/Create-a-password-reset-disk

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I would like to buy and install a stand-alone version of Lightroom on my iMac. I do not want to join the CC program. The CC is not an option for me. I'm iMac late 2009 user, osx el capitan, installed on a formatted hard drive 1 t, 16 GB of ram with1066 MH

  I would like to buy and install a stand-alone version of Lightroom on my iMac. I do not want to join the CC program. The CC is not an option for me. I'm iMac late 2009 user, osx el capitan, installed on a formatted hard drive 1 t, 16 GB of ram with1066 MHz PC3-8500 DDR3 SDRAM. Everyone uses LR6 on iMac late 2009? anyone has any experience with el capitan and LR6 osx?

  Hi Piotrsta,

  With the last update of Lightroom, most of the problems have been corrected.

  Also, you can read the following article: Lightroom and El Capitan | Mac OS 10.11

  Kind regards

  Tanuj

• Old computer with Photoshop is dead, had to buy a new computer.  How to install this on the new computer?  I do not have a disk, I bought online.  I looked in my account shows, I bought it, but don't see an option for installation.

  I do not have a disk, I bought online.  I looked in my account shows, I bought it, but don't see an option for installation.

  You can do so here:

  Download Photoshop Elements products | 10, 11, 12, 13

• I just installed for CS5 and my option for installation of the shares does not... How to install?

  I just installed for CS5 and my option for installation of the shares does not... How to install?

  I'm just not my palette actions checked.  Fact.  Thank you.

• CVI 2009 Build Distribution: create shortcuts

  When I change the settings for Distribution to build, I want to install my application under C:\Program Files\myFactoryDir\myAppDir, so in the "Edit" window, I use the tab "Files" to change "Installation of files and directories" as I need.

  So, I want to create the following shortcut:

  [Start>>Programs]\myFactoryDir\myAppDir\myApp.exe

  but I'm not able to specify "[start > programs] \myFactoryDir\myAppDir" as the Destination Directory (in the menu ring, only [start > programs] \myAppDir is available).

  Is it possible to do in CVI 2009 (as I am used to doing with LabVIEW)?

  In fact, please ignore the previous screenshot. Looks like I misunderstood where you want to place your shortcut. But it's even easier, then, since all you need to do is to rename the folder shortcut in the files tab:

  

• Cannot uncheck the installation options

  Hello

  When you try to download the latest version of Skype, the installation window is too small and I can't uncheck options for default search engine BING, etc..

  You cannot resize this window either.

  Anyone know a solution to this?

  Thank you

  

  

  This occurs when you have selected a font size larger on your monitor. Unfortunately, the developers of Skype did not account when designing the installer screens.

  If you do not want Bing or any additional software garbage installed during the installation of Skype, you can use an msi installer. The currently latest version of Skype 6.18.0.106 can be installed using the msi installer:

  http://download.Skype.com/MSI/SkypeSetup_6.18.0.106.msi

• No option for "Scan to Computer" Lion mountain on Mac

  I installed the latest drivers from "full functionality" for my Officejet Premium 8600, v12.23.0.

  I'm running OS X 10.8.2 (Mountain Lion).

  I want to be able to scan directly from the printer to my laptop, using the function "Scan to Computer".  However, when I open the HP utility, I see no option for "Scan to Computer" in scanning settings.  I don't see options for 'Scan to email' and "Scan to Network Folder".

  In the search of these forums, only suggestions that I found are to install the full featured of the printer drivers, I have already done.

  Many thanks in advance for any help!

  -Nate

  Click your desktop, then click on the menu to go to the top and select Applications you should see the Hewlett-Packard folder.

  If you do not see such a folder, run the installation once more, make sure you check the HP recommended software during the progress of the installation...

• Liaison GPIB CVI 2009 real-time error

  The code of source GPIB only call the ibdev function.

  ibdev (0, 1, NO_SAD, T10s, 1, 0);

  When I tried to compile the code source GPIB CVI 2009 real-time, I received the error message following link.

  Project link error:

  Symbol not defined "__imp__GetCurrentProcess@0" referenced in "c:\program NIUninstaller instruments cvi2009\cvi2009\bin\msvc\cvistart.lib '...

  But the GPIB source code can be compiled and run under windows XP.

  Any help out there?

  Thank you.

  Vincent,

  Hello.  First of all, I wanted to mention that the NI GPIB library is not officially supported on systems time real LabWindows/CVI.  Your customers use it more in the earlier applications of CVI RT?  Can you tell me what features they use?

  While the NI GPIB library is not officially supported in CVI RT, errors of link that you see in CVI 2009 were not intentional.  You can tell your customer to copy the file gpib.lib to the location of the CVI 9.0:

  \National Instruments\\bin\msvc\gpib.lib

  the location of CVI 2009:

  \National Instruments\\bin\msvc\gpib.lib

  This should fix the problem.

  If your client has never repair or reinstall their installation of CVI 2009, they will have to make this change again.

  We intend to fix this in the next version of LabWindows/CVI.

  -Jeff

  NEITHER

• "Value is invalid or out of range" when you build the project in CVI 2009

  I converted a project to the wire of the CVI 9.0.1 to CVI 2009, and whenever I try to compile the distribution I get immediately the error message "Value is invalid or out of range" and stop the construction.  This error message is not too terribly useful to determine what the problem is, and I don't see anything obviously wrong with the signs of 'change the Installer '.  Any idea what's going on?  Thank you.

  Well, I'm a little confused by what I see. The newspaper confirms my suspicions earlier that one of the values of timer progress cached version is cause of an error. However, the values in the file "TriboScan OFFLINE.cds" you posted appear very well and do not cause an error when I copy in .cds another simple distribution (since I do not have the files to test your actual building distribution). Are you sure that you build the 'TriboScan OFFLINE.cds' distribution? In any case, I recommend a little offending the .cds hand editing. Save first (just in case), open it in a text editor and delete everything between and (that should be all down). This should solve your problem.

  Let me know what you find.

  A. Mert

  National Instruments

• HP Photosmart 5500 series main: installation procedure for the printer software

  In my attempts to install the software of series of Prniner of 45510e-all-in-one Photosmart hp, I think that the process does not complete the installation of the software. After I clicked on that I accept the terms of the agreement, that he turns back to the ilnstall screen and a few seconds, it indicates the installation is complete. I don't think that the process is quick. It seems that there may be interrupted the process.

  In support of this contention, the printing software HP and doctor Scan shows the software seems incomplete and that there are problems of dirver.

  Can someone provide explanations that the question of the installation is deficient in this case, or that he really install this fast?

  Arthur

  The initial installation software for the HP Photsmart 5510 series was the correct software.  I finally resorted to re - install Windows 10. I was then able to uninstall properly the remains of the 5510 installs my computer which allowed somehow not all subsequent installations trying to finish. Unfortunately, the software would not overwrite the wrong files and it does not alert me to the fact that it was not complete installation.  It simply says that the installation is complete.  My guess is the ultimate failure of the procedure was the result of some entries in the REGISTRY, creating a conflict with the installation and full installation process was abandoned.

  The process automated to re - install then took place without a hitch and all the functions of the printer now appear to work as expected.

  I think that an option in the installation process to allow overwrite existing software on the computer may well have solved this problem without pain. The alternative that I had to go through has been extremely laborious and frustrating.

  ArthurmB

• the .c and .h files still open in CVI 9.0 even with CVI 2009 is installed

  I had this problem for a while but have managed to live with her. Since I installed LabWindows/CVI 2009 my .c and .h files still open in LabWindows/CVI 9.0. all .cws, .fp, .uir and .prj files will open in 2009. I tried the files in "file types" remapping and even fiddled with the registry to try to get the .c and .h files to open with the correct version of the CVI. This has been without success.

  Any help would be appreciated.

  Thank you!

  I found myself fixing entering into the registry and change the path to cvi.exe. He was always set the path to the executable file for CVI 9.0. That's what the types of files for .c and .h files were SEO even if I selected the executable file in 2009 of the CVI.

  It seems that the path was never changed when I installed CVI 2009.

  Regards-

  John o ' c

• I lost the disc to restore my phone and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  I lost my laptop computer restore disc and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  My title says it all. I have an old HP laptop that they do not send to restore the disc more (I don't know yet I had one; his old laptop from my brother) and I have an installation disc for my new PC. I have a Windows XP Home edition SP2 installation disc. However, as the hard drive of my laptop broke down, I don't know what version of windows it was. I think it should have been an OEM version and the sticker says it was Windows XP Home Edition.

  Now, anyway I tried to install my installation on laptop computer disc, offering series of laptop computer but now it asks me to activate. Will it work if I activate it?

  Thank you

  Unless you are lucky enough to know someone who has a generic OEM drive, which you can borrow, I don't see a practical solution for you.  I advise you to spend the money to buy one, even if you could find one to buy from a reliable source (not eBay!).  Although a generic OEM disc should work with your product key, there is no guarantee that it will work with your product key.

  If your laptop can be retrieved through a restore partition, and you can't borrow a disc that will work with your product key, then you have pretty much exhausted all reasonable or practical options.

  I finally did! I borrowed a copy of a generic OEM drive, through activation and it is!

  Thank you much for the help...

  Now I've done could you help me more? Say now, I returned the drive OEM back (don't want to make an illegal copy) and want to be able to use my current system installed to generate a system disk that will allow me to avoid all the problems I've had up to now. What would you recommend? I've read a few articles on other forums (I did some research!) but is a little confusing. I hope you could help.

  Thank you

  @Carey Frisch - positive Get... you want to help here not only your view of what I would do with my money!

• My new HP Pavilion Desktop PC has no option for my old Canon Pixma iP 2600 printer usb connection

  Greetings:

  I can locate is no longer the installation disc for my my old Canon Pixma iP 2600 printer.  I am able to install it w / add it as a printer in the Control Panel, but the Office feature fails to read that the printer is connected via the usb cord.  I'm not find no possibility to install it as a usb printer.  Please help as soon as possible.  I can't afford to replace the printer and I have several documents that I need to print today or early tomorrow, or there will be dire financial complications for me.  I NEVER had that problem w/Dell.  (the operating system is windows 7, which is exactly what I was running on my old dell model - I searched this forum and find a similar question, but that the consultant has been able to find a usb option in the drop down menu to the port facility.)  that option is absent in my attempts).

  Thank you!

  Interestingly, I discovered (after wasting a ton of time online and on the phone w/less useful HP tech) that the problem was in the two faulty usb ports on the front of this new processor.  at this point, I plan to return to the model of costco and return to dell.  Thank you for your help.