CyberLink PowerDVD 10 Blu - Ray not playing is not in Windows 8

Similar Questions

• I have Windows 7 I can't get one say Blu Ray to play with HP MediaSmart DVD.

  I have a Pavilion DV7, but I don't have any idea of other number that you want.  I can't find another number from anywhere.  The problem is with the HP MediaSmart DVD player.  It will not play a Blu Ray disc.  It will load then wants to do an upgrade.  However it won't do it.  I have open the setting and try to update manually.  It shows not anyupdates.  How can I get Blu Ray to play once AGAIN.  I have Windows 7 Pro.  The version of the MediaSmart drive is 4.2.2.5122

  Hello

  As you use HP MediaSmart DVD to play Blu ray discs, I would suggest trying the following.

  HP now provides a version of PowerDVD 10 Cyberlinks which seems to be a better solution.  Download the latest installer for it on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56904.exe

  Once the download is complete, open windows control panel, open programs and features, make a right click the entry for HP MediaSmart DVD and select uninstall - when this process is complete, restart the laptop.

  When windows has reloaded, open your downloads folder and double-click Setup for PowerDVD 10 start the installation.  Once this done, see if your Blu ray disks will now play OK.

  Kind regards

  DP - K

• PowerDVD 10 Blu - ray allows for crashes frequently.

  I have a new pavilion dv7-7047 cl and Powerdvd 10 but reading blue-ray crashes frequently. DVD plays perfectly but not the Blue-Rays not. I tried several different disks. Hang some immediately and others will play for a minute or two. New discs or elders make no difference. This could be a hardware problem. My machine is still under warranty.

  It is a new machine and must play!  I could call them and see what they say.

• Blu - ray not playing does not sertain movies

  I have usually experienced small problems with BD playback, up to now. Currently some movies refuse to play, and at least one poster a warning.

  Your Blu - ray player requires an update to play this disc.

  The manufacturer of your Blu - ray player recommends THST you go to the site below...

  http://CyberLink.com \BDUpdate

  Problem is, HP Mediasmart is no longer supported, and according to the need of websiteI to buy a new version of cyberlink locks mediasmart is no longer supported.

  First of I must say when I buy rater portable media costly, with Blu - ray player as one of the main points of sale, then I expect to support all Blu - ray movie discs, any ideas stupid hollywood comes with.

  But I don't know if it would work eiter. Because I tried to download free software that, according to the developer should be able to play the last BD - drive on the market, and they do not have too.

  Is this really a software problem, or is it a firmware issue?

  SUGESTIONS?

  Apart from a few BD movies, all disks usually times very well.

  @ Serpentbane

  FTP://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54746.exe

  Save this file to power DVD10 on the desktop and install it from there, not in a temporary folder. This version is free for owners of HP.

  After installing, restart your computer and load the disc using the eject button on the DVD drawer.

  Allow Blu - ray charge automatically with output power DVD10 of openness, to give him a little time.

  If it won't play, please let me know what Anti Virus software you are using, what your operating system and what the the model number of your machine.

  If it is a 'B' or 'C' region as Banhien suggested and then you need to change the region code, but you can change it only 5 times. Any DVD from SlySoft can remove the region code, but it is not free.

  Permission of now Media Smart DVD where he is, power DVD10 and MS DVD can exist together.

  What is the name of the movie that will not play, I can see if I have it my collection and try and play on my machine?

• Media Smart DVD, not so smart... Will play only some blu ray, not all.

  When I get a computer with a drive blu - ray I expect to read blu ray discs... all of them. It works with some but not all.

  Records, it does not work with, what happens is it will ask me 'Do you want to check updates' and there will be a box to check yes or no. Basically, it will say disc is ready to play, just play to push. Easy right? HELL NO.

  If you check Yes, it will make the symbol of the wait little and the request of updates, then come right away and you still ask once, a circle without end to check updates. If you press n, it will go away, then you have a few options, one is to open the menu and see if there is actually an update... No. no updates it. the other option is to do what he says and push the game because he thinks that the blu ray is ready to play. Once I press play it starting to think and appears as "you want to check for updates" again. It's so frustrating. HEY HP, FIX CELA DUMB TRAP CIRCULAR THAT USED LET ME WATCH BLU RAY.

  And it is a blu - ray disc video block buster movie. Not some copied disk random. So, I know that it is not the disc.

  After spending a lot of time chatting with their service Dept. It seems that this will not work until the next update mediasmart. The technician told me to use Cyberlink power dvd 10 until then, I downloaded the free trial version, and it worked fine. Thus, they have 30 days until my free trial exhausted.  We will have to see.

• Drive Blu - ray BDX1200 play is not all content - sometimes!

  Hello

  Sorry if this is in the wrong section of the forum, but there is no Blu - ray section.

  I have a UK model BDX1200 Blu - ray that I bought there is a little less than 2 years.
  Recently purchased 2 Blu - ray discs, I found that he would play not all content.

  The player seems to be stuck loading the content with a black screen and generally sound as the drive is being spun over and over again and cannot be read.
  I have to power off the power at the wall outlet to get the drive working again.

  Specifically, I couldn't play most of the peculiarities of The Avengers, although I could get some of them to play by power cycling the player, and the actual film played end.

  In addition, I couldn't play the Hobbit film, although I have power rolled several times, and the disc plays on the machine of a friend. I just tried and the film plays without problem, it's an intermittent thing.

  I checked the firmware updates, but I already have the latest version.

  Anyone has any suggestions, or do you think it is a failure? TIA.

  Hello

  > Also, I couldn't play the Hobbit film, although I have power rolled several times, and the disc plays on the machine of a friend. I just tried and the film plays without problem, it's an intermittent thing.

  Well, I put t think its firmware problem, because the same disc worked properly after reattempt.

  Maybe it s a question of laser lenses? I had some problems with my camera of player playing DVD discs, because the laser lens was dirty. I used special CD/DVD cleaning kit to clean the lens of the laser. Just an idea that you know...

• While a Qosmio - Blu - ray player plays not double-layer disc BD - 50

  Hi guys

  I have an all-in-one computer with a blue-ray player, and I can't read the disc double layer BD - 50, but the BD-25 single-layer so thin.

  Can anyone help?

  Seems his disc is not compatible.
  Have you tried different disc double layer BD-50 from different companies?

• 6000 series, 6770 m, Cyberlink Power10! = Blu - Ray

  
  

  I think I got the question here, WITHOUT the help of HP or Cyberlink support .  It seems that the version of PowerDVD 10 that shipped with the dv7tqe (# XW899AV) is indeed DIFFERENT than what is installed if you choose to upgrade to MediaSuite 9 ultra (not quite as Super, aye?).  You should use "sp53029.exe" If you want to be able to use the 6770 m GPU for display of Blu - Ray (Intel HD work in BOTH versions)

• Drive Samsung R720 Blu Ray not recognized in Windows 7

  I have BD E DS4E1S on Samsung R720, Windows7 32 bit. I have installed the Cyberlink software provided with the computer to play the BlueRay disc and it worked fine until about a month ago. Then, I received some updates for Windows 7 and Cyberlink and now when I insert disc BlueRay is unclear, said no. DISK. I did factory restore and reinstalled Cyberlink suite on the same installation CD but it did not help and I still can't play Blue Ray discs.

  Thanks in advance.

  * original title - cannot play Blue Ray discs, just stopped... *.

  Hi Sidnokarb,

  See the article after some troubleshooting for your question:

  http://support.Microsoft.com/kb/982116/en-us

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• problem with blu ray player playing

  My computer has played a blu - ray player before and now it will not. It is said that a program is running that is not compatible with what I want to do. I can't find the program. I downloaded an update, she needed and I was in everything I do. It is my first computer and have self taught myself, that's the biggest problem I've had so far. For 4 can hours, I tried to fix it, you please help? Thank you.

  My computer has played a blu - ray player before and now it will not. It is said that a program is running that is not compatible with what I want to do. I can't find the program. I downloaded an update, she needed and I was in everything I do. It is my first computer and have self taught myself, that's the biggest problem I've had so far. For 4 can hours, I tried to fix it, you please help? Thank you.

  =========================================
  The following link might be worth a visit:

  Windows 7 - open the reading and burning CDs, DVDS,
  and the resolution of the problems of Blu - ray discs
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

• How to play discs Blu - ray using Windwos Media player in Windows 8?

  Title: WDS8 original media player 12 codex bluray

  I have download the extras for media player, to get the full value of the program and it won't play Blu - ray DVD. Yes, my machine has right legacy to read Blu - ray!

  Hi Richard,

  Thank you for choosing Windows 8 and join us on our community.

  Please answer a few questions to help us better understand the issue.

  1. have you installed third party codecs needed for playback of Blu - ray discs?

  2. what options you have downloaded to play Blu - ray discs?

  3. what happens when you try to play Blu - ray discs?

  4. do you get an error message?

  I would like to inform you that Windows 8 has need of third-party codecs to play Blu - ray discs. Then I would like you to install third-party codes and try again.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I would also like to inform you that Windows Media Player in Windows 8 does not support DVD playback. So to play DVDs, you must have Windows 8 pro with the feature pack of Media Center. You can go through the link for your reference.

  Playback of DVD for Windows options

  http://Windows.Microsoft.com/en-us/Windows/DVD-playback-help

  Your answers are important to us. Get back to us with your answers. We will be happy to help you.

• Bad burn on Blu - Ray; not enough space?

  Hi all

  I bought a blu ray burner =:

  http://www.bhphotovideo.com/c/product/1051647-reg/samsung_se_506cb_rswd_sam_slim _exterior_blue_ray.html

  Create the disk opens its doors to about 66% asks me to insert a disc. The project is only about 3 minutes. long.

  Then, at some point, I get the error message; "Not enough space on the startup disk.

  Once the error was; not enough space on the disk, but it's a Virgin blu - ray disc. (BD - R)

  There is plenty of space on the hard drive of my iMac.

  The burner did not come with software to Mac but I chose the burner in the FCX share window.

  Other: When I right click on a movie on the desktop file I see an option for burning, but where can I say it blu - ray?

  Thank you

  Al

  Is the library of the PCF on your startup disk and where the media is stored?

  If you burn a movie from a file in the Finder, it is a data disk and will not readable on a Blu Ray player.

  Russ

• My Blu ray player no longer recognizes DVD or Blu Rays, still plays CDs

  I have a HP Envy 17, everything worked fine until I started to want to rip DVD for my my player and convert it to MP4 for my tablet.

  Installed DVD decrypter, who then tried to define regions of DVD and c... Has started the stalled DVD ripper to half way through now, the reader does not recognize Blu Ray and DVD, CD is not yet well.

  Have removed DVD decrypter and re installed device drivers and did a system restore but still not fixed

  Any tips?

  Hello

  OK, let me know if this is not the problem.

  Kind regards

  DP - K

• CyberLink PowerDvD 5.1 will not play DVD

  I recently had to replace the hard drive on my Inspiron 1200. After you install the software from the restore disks, I get a message "Protected content" or words to that effect. Any help will be appreciated.

  
  

• Why my Blu - ray discs play no more after the application of all updates

  I applied all updates for Win 7 x 64 to my e9180t.

  Media Smart now plays regular DVD but not of bluray. That is what it is?

  Hey TXGuy,.

  Take the update mentioned in the Mr. Do. the process of upgrading to Windows7 if you qualify for the upgrade HP is to load the upgrade wizard HP first disc. It copies all of the updated drivers and applications on the system if you do not have to go hunt down them on HP.COM.