Dark screen / low intermittent on my Pro Sat 1110

Similar Questions

• Screen broke on my A10 Pro Sat

  Hi all
  I have a Satellite Pro A10 Celeron, and I think that the screen is cracked. However, I want to confirm that the screen is cracked in fact.

  It looks like this:

  When the power is off, I can see a jagged black line of thinking, running in a shallow sloping curve in the upper part of the screen. The 'crack' starts about 4cm from the left and 3.5 cm high with a diagonal line from the top of the screen and 2cm from the left at the beginning of the crack. At the end of the crack, it is another diagonal line running to the top of the screen and is about 1.5 cm from the right side.

  When I turn on the laptop black pit curved Garni is available with a flat bottom where is the crack. The screen is mostly white, but it is a band of about 1.5 cm wide on the left of the screen that works. (I can see my desktop). On the edges of the white box, there are a few very fine horizontal and vertical lines.

  When I press on the screen I seem to be able to open the crack, doing little more big black!

  I think it's a cracked screen...

  So if it is cracked, I need a new screen. A new Toshiba will cost £323,00 TTC!

  My main questions are:

  (A) what is the actual type of the screen that I have, and what its part number, description, and name of the template?

  (B) what other portable use this screen? I think that it is a Samsung screen and is used in other portable Toshiba and other manufacturers. Maybe I could get a screen of another laptop that would fit.

  (C) where would be a good place to look for a 2nd hand screen. There must be a place full of laptops with good screens and motherboards exploded or a place that sells the savlaged screens.

  (D) where can I find a tech document that will tell me how to disassemble this A10, so I can get the screen? I know that these technical documents are somewhere on this web site, but I can't find them so far.

  (E) what could happen to the screen? My father said that he became aware, nothing has happened. He was put in it is transported in his car to another place and when he's out of the case and it works... Broken screen.

  Help, please.

  2-6

  Hello

  A: Satellite Pro A10 comes with two different screens: 15-14.1
  HTTP://UK.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=UK&ACTION=PRIN T_WITH_BACK & PRODUCT_ID = 66214 & DISC_MODEL = 0

  HTTP://UK.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=UK&ACTION=PRIN T_WITH_BACK & PRODUCT_ID = 69234 & DISC_MODEL = 0

  B & C: Please see this page:
  http://www.screentekinc.com/Toshiba__Satellite_Pro__A10_lcd_screen.html

  I also recommend to check out the offers on Ebay.

  D: If you wish to have information on the replacement of more detailed material, please contact the ASP.

  E: Not easy to say why or what happened. It s a physical damage. In this case, I assume that the laptop has been abandoned or something like that.

  Concerning

• HP Pavilion 15 n043ee - dark screen

  The screen of my hp pavilion 15 043ee N laptop is extremely low. I am unable to see anything on the screen, unless I have shine a flashlight on him, and even then, I can barely see. When I connect it to an external monitor, it works very well. I restarted and press f8 to access the bios screen and is also dim there as well. My laptop is only a few months old, and it's very disappointing. Please advise me on how to solve this problem. Thank you

  Hi iverson999,

  Welcome to the HP community! I saw your post about the dark screen on your new building. Good call by connecting it to an external monitor. From what you described, it seems that the converter to display may not work. Since it is a hardware problem and a few months, I would recommend that contact you HP. You can reach HP Total Care at 1-800-474-6836 in North America or Start here if you live outside of North America.

• Failed to start; dark screen extended

  On the attempt to start, the screen was black. Screen brightness then returned; It appeared that I was in 'safe mode' and that, perhaps, I forgot my password. I then initiated a reboot, but the same cycle repeated, starting with a black screen. Help. MacBook Pro OS X El Capitan.

  Reset the NVRAM/PRAM memory.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.

  https://support.Apple.com/en-us/HT201295

  If this does not help, please contact Apple.

  Click 'Contact Support' at the top right of this page.

• where the screen low re load photoshop after computer updatingmy

  Ive had my computer updated and wiped where is the screen low re load photoshop

  Hi Davidl41073247,

  In addition to what Derek suggested, please click here to Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial

  Sign in with your Adobe ID (email address) used for the purchase of the subscription/membership of the creative cloud after installation.

  See also, connect and disconnect activate Cloud Creative applications

  Let us know if that helps.

• I bought the Creative Suite 5 cloud in June 2010 (Ser # DELETED) if I recall with two licenses, one for my laptop iMac book Prod and one for my iMac 27 "flat screen.  My Mac Book Pro needs to be replaced by a newer Mac Book Pro wi

  I bought Cloud Creative Suite 5 in June 2010, if I recall with two licenses, one for my laptop iMac book Prod and for my iMac 27 "flat screen.  My Mac Book Pro should be replaced with a new Mac Book Pro with recent operating system software upgraded OS.  What can you do for allowing me to transfer my course in Creative Suite 5 for my new Mac Book Pro?

  [NEVER SEND A SERIAL NUMBER IN AN OPEN FORUM.]

  [personal information... [Mod - https://forums.adobe.com/docs/DOC-3731]

  [This is an open forum, not the Adobe support, please do not post personal information]

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• Satellite Pro 4600 dark screen

  Hello

  I use an old satellite pro 4600. If I try to use them in the operation of the line, the screen is always black. Even if I press the sleep button, it becomes only completely briefly (1-2 seconds) sound, then immediately again darkly. If I use them on akku, it works. Will be - it only occasionally after dark, can however still vivid be squeezed. I also feel he crosses with online operation more power than akku. Is this a problem of attitude or the laptop needs to be repaired? Thank you very much for your answers!

  I had to same problem with my laptop A100... It is very annoying. Can someone give some answers please?

• Blue screen when installing Win XP Pro on the Satellite A100-211

  Hi all.

  I'm started to get really desperate here! I just bought my new Satellite A100-211 and now I want to install my own copy of Windows XP Professional (as the laptop comes with XP Home). But, when I try to boot from my Win Xp Pro CD (with no SP1 or SP2 integrated), I get a blue screen of the STOP just as the installation application reached the phase "the installation program starts Windows! The STOP message says something about a file named "pci.sys".

  I don't know what the problem is or how to install XP Pro! It should be so simple! I even tried the SATA drivers from intel and load the Windows XP Pro install the program installation (F6) with a floppy, but I always get the same blue screen at the same stage of the installation.

  Can someone help me please? Can someone explain how to install Win XP Pro on this laptop?

  Thank you very much in advance! I'm really really freak out with this
  Octavio.

  Hello

  Did you get this error message?
  "stop error 0x7E in Pci.sys".

  I found information on the Microsoft site that you need the latest Microsoft service pack.
  http://support.Microsoft.com/?kbid=839641

• Charging intermittently on Satellite Pro P100

  Charging the battery intermittently, the screen flickers, mousepointer jumpy, Ko misses key hits.

  Very often, when the connected power cord, my Satellite Pro P100 enters a State where all these symptoms are the nearby unusable computer. The battery in the change status bar icon also between the connected and not. And when it says connected, more often it's "connected but no charging current. The charge to the front LED changes between off and orange.

  Even when he sleeps, the LED changes to orange wide and battery does not charge.

  I think it is associated with heat, I can usually load by closing and wait a while.

  Yes, I regularly check for the latest drivers and BIOS.

  Can anyone suggest something to help me? Is this a warranty issue?

  Krikke
  Vista SP1

  > I have exactly the same problem in a P105-S9337. It is very annoying, any ideas anyone?

  The user above posted some ideas; He said:
  > the new battery did not help. Must be another hw question

  So as you can see, the battery should be checked. If it doesn't help then the problem must be bound to the hardware problem and in this case he should contact a Toshiba ASP!

• S 3000-S353: dark screen

  Hi, I wonder if someone can help me.

  For a few months now, the screen darkens, as soon as I turn on the computer. Dark as in as no display, but if I squint really, really hard I can still see everything in the background.

  It is used to occur intermittently, as it would happen and if I restarted for about two or three times it goes back to normal without problem.

  But the last two days, it darkens and no matter how many times I reboot it will not brighten up.

  I think this isn't the energy saver, and I can not yet use the FN combination.

  Any thoughts?

  Thanks in advance

  Hello

  I think that you have a physical problem with your computer. my suggestion is to contact a service partner and they give you an estimate on how much it will cost to fix.

  BR

  Tom

• Dark screen

  My Thinkpad X 201 has been slain with a Dim screen all day - I think that since I have connected to its docking station to connect my external monitor. Problem persists when I remove but

  When I go into the power settings to adjust brightness, that nothing is happening despite the displacement slider and keys change of brightness on the keyboard do nothing either - does not even show the brightness on screen display

  The screen is not dark just very dark (near the lower brightness I guess)

  Does anyone else have this problem?

  If you are in a completely dark room, the screen emits no light?

  Try changing the brightness using the keys while in the configuration screen of the BIOS (F1 big ThinkPad logo valve).

• Black screen on computer Lenovo Yoga Pro 2 after the opening session in Windows 8 screen

  I return this laptop Lenovo Yoga Pro 2 about a month and it has Windows 8. I start the laptop and once I enter username and password, I have a black screen with the mouse pointer. Lenovo support has been useless. They asked me to run c:\windows\system\restore\rstrui.exe by using the Task Manager, but I get the file not found. When I go to the command prompt by using the Task Manager and check dir listing in the directory of restoration, it shows empty.

  Very frustrated. Can someone please help here on the Microsoft Forum?

  Thank you in advance.

  It seems to me a solution, it worked for me, so hopefully it will work for you as long as you experience the same problem.

  Because you can always go to the sign in screen, do the following:

  Click on the power icon in the lower right to open the menu,

  Hold down the SHIFT key while clicking the button of /restart/ once.

  A screen will appear after a few moments.

  Click and follow the instructions /Refresh/ and let him go during its cycle...

  all fixed!

• Kernel_Security_Check_Failure blue screen of death. First Pro CC 2015

  I'm having the same problem with Premiere Pro CC 2015... I deleted the Sniffer.* file... running PP as administer... all my drivers are updated to the current... still not blue screen... only when you run Premiere Pro CC 2015... other programs are working fiine... Please advise... Thank you

  Hi all

  Thank you all for your support on these forums. I had a huge problem with the first bombing and blue screening with Kernel_security_check_failure myself. I searched high and low and tried a lot of things. I am running the latest version of the Adobe software with a home win 10 Dell Alienware brand new 15R2, the construction of 10586.36, processor Intel core i7-6820HK @2. 7 GHz 2.71 GHz, RAM 16BG, 64 bit with NVIDIA DeForce GTX 980 M with the version of the driver 10.18.13.6143. I contacted DELL for 2hrs, Adobe, then NVIDIA, we checked the equipment, power, heat, the drivers (latest) and considered a reinstall. But, first, I cleaned the registry of multiple attempts to pilot and ADOBE installs, sets off using CCleaner (can use other FREE software). I then talked to NVIDIA. It turns out later drivers are good for the games, but may have a problem with other software using the video card. It may change in the future when they make an update of the driver. However, they proposed the following text:

  Please click the link below to download and save the file to the desktop:

  http://International.download.nvidia.com/Windows/359.12/359.12-notebook-win10-64bit-intern ational.hf.exe

  Once the download is complete, please do the following:

  1. start the installation
  2. choose custom installation and click Next.
  3. check all the boxes in the custom install options windows and also check the box which says ' Perform clean install '...
  4 restart your computer.

  You don't have to restore the driver (device - properties of NVIDIA card Manager), just follow the steps and make sure that you perform a clean installation. It should work. I have worked for me. If you are not sure, contact NVIDIA because they were very helpful. Hope this helps someone. I lost a few days on it and I hope this helps others. Mike

• I want to use my old imac as a screen for my new macbook pro. Should what cable I use?

  My imac has a port mini screen but my macbook pro is not, however, it has a bolt of lightning and a HDMI port.

  What is the best way to connect them?

  update - the imac has a mini DVI port not a mini display port

• Big screen for the new Mac Pro

  Looking to buy a new Mac Pro.  I like to work while sitting on the couch with my feet supported, but a laptop is not very good for usability, and my neck has had enough.  So, I think trying to upgrade a number of things and to combine the entertainment center with work stations, so I can do both comfortably from my couch.  Ideally I would love it if Apple made a gigantic Retina display, but as they do not have, my current theory includes a 48 "-52" class 4 K HDTV connected to a surround sound via HDMI system, which hangs in turn a blu - Ray player and a Mac Pro via HDMI.

  If someone has done something similar?  I'm assuming that, unlike the old flat screen TV model at work sometimes I mirror my iPad on, a 4 K Pixelize text.  Is this correct?  Or should I still the same problem?  As far as the projectors are a pain, which is the only really good solution here?  Any other question, I would need to know that displays the parameters or incompatibilities if I went with the 4 K HDTV?

  May be useful to take a look at http://www.macrumors.com/guide/4k-5k-displays-buyers-guide-mac/ which covers the 4 K screen with Apple hardware support pretty well.

  You will encounter one of the limits is the HDMI output on the current Mac Pro supports only 4K at 30 Hz not full 60 Hz, which we are used to on most screens. You can watch a form of Thunderbolt to the HDMI connection for display to work properly at 60 Hz.