data transfer help please :) (I am a fool!)

Similar Questions

• My iPAD asks me to update to OS 9.3, but the update fails because it says that the iPAD is not connected to the internet and when I connect to my computer iTunes it say my OS is up to date.  Help, please.

  My iPAD asks me to update to OS 9.3, but the update fails because it says that the iPAD is not connected to the internet and when I connect to my computer iTunes it say my OS is up to date.  Help, please.

  I'm surprised to hear that for an iPad 2 that the issue had apparently been set for 2 s. Please see this for more details as I know them. Maybe the servers at your site have not been updated yet for the new version of the iPad 2.  ???

  Apple released the update iOS 9.3 for older devices (air of iPad and previous iPhone, 5 s and previous) due to problems with Activation. See the following for details and possible solutions.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  https://support.Apple.com/en-us/HT206203

  A new version for the iPad 2 is now available which does not require the activation step. A new version for other devices is not yet available.

• I forgot my password and got my iphone disabled after several attempts. its display to connect to itunes, but I am unable to connect to itunes too. How can I unlock my phone without losing any data? Help, please

  I forgot my password and got my iphone disabled after several attempts. its display to connect to itunes, but I am unable to connect to itunes too. How can I unlock my phone without losing any data? Help, please

  In short - you can't

  IF you have a computer with iTunes on which you did a prior backup - the phone will be recognized and iTunes offer todo backup before it clears your device - that - except if you know the access code the content cannot be saved

• How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!

  How could a routine walk-run? Inside, Indoor walk or another run? I do this routine outdoors with Gps first so that I'm not kidding my calibration data? Help please and thank you!

  Hello

  Choose indoor walk or run Indoor (it does not matter which) to an indoor walk-run routine.

  Even if Apple Watch does not currently offer as a workout interval training, choose one of these allows the most appropriate data sources (which are the same for market and short) to use to track your training.

  If walking or running, the accelerometer is used to estimate pace and the distance (allow your arms swinging naturally) as well as the frequency heart sensor for the estimation of calories burned.

  Run or walk inside will not affect your calibration data. Calibration is based on the GPS of the iPhone data and is only held during the outdoor walking training or race outdoors when the iPhone combined is taken along.

  More information:

  Use of the workout on your Apple Watch - Apple Support

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

• Lightroom 6 suddenly very slow.  All my changes drag on the screen at least + 10 seconds.  The screen seems frozen between each edition.  I use a macbook pro and all my programs are up to date.  Help, please

  Lightroom 6 suddenly very slow.  All my changes drag on the screen at least + 10 seconds.  The screen seems frozen between each edition.  I use a macbook pro and all my programs are up to date.  Help, please

  Hi janeslens,

  • Go to Lightroom > Preferences.
  • Also please go to preferences > Performance tab and uncheck the box "use graphics processor.
  • Restart Lightroom and see if it works.
  • Please make sure you also update of Lightroom to the latest version, which is 6.3 Lightroom

  Let me know if it helps.

  Kind regards

  Tanuj

• Update is not store data! Help, please!

  It's driving me crazy! I have a form of update that throws any errors on presentation, but stores no data either. I checked through my cfdump data fields are spent and in the correct data types. I am sure that the problem is in the primary key. It does not appear in my cfdump but I don't know that it should because it is a hidden field. It appears in my source code (which I don't understand since this kind of defeats the purpose to be hidden) so I think it's happened, but I still don't get any update. Help, please!

  Here is my form:

  < do action = "update_product.cfm" method = "post" > "

  < cfoutput query = "getProducts" >

  < input type = "hidden" name "ProductID" value = "" #ProductID # "/ >"

  < table >

  < b >

  < td width = "178" style = "width: 178px" > < table >

  < td width = "375" style = "width: 375px" > < table >

  < td width = "175" style = "width: 105px" > < table >

  < /tr >

  < b >

  < style td = "width: 178px" > logo maker: < table >

  < td colspan = "2" style = "width: 375px" > < input name = "ManufacturerImage" type = "text" style = "" width: 230px "value =" #ManufacturerImage #"> < table >"

  < /tr >

  < b >

  < style td = "width: 178px" > manufacturer: < table >

  < style td = "width: 375px" > < input name = "Manufacturer" type = "text" style = "" width: 230px "value =" #Manufacturer #"> < table >"

  < style td = "" width: 105px "valign ="top"> < table >"

  < /tr >

  < b >

  < style td = "width: 178px" > product title: < table >

  < style td = "width: 375px" > < input name = "ProductTitle" type = "text" style = "" width: 230px "value =" #ProductTitle #"> < table >"

  < style td = "" width: 105px "valign ="top"> < table >"

  < /tr >

  < b >

  < style td = "width: 178px" > the product image: < table >

  < td colspan = "2" style = "width: 375px" > < input name = "ProductImage" type = "text" style = "" width: 230px "value =" #ProductImage #"> < table >"

  < /tr >

  < b >

  < style td = "" width: 178px "valign ="top"> product description: < table >"

  < td colspan = "2" rowspan = "3" valign = "top" > < textarea name = "ProductDescription" cols = "50" rows = "10" id = "ProductDescription" > #ProductDescription # < / textarea > < table >

  < /tr >

  < b >

  < style td = "width: 178px" > < table >

  < /tr >

  < b >

  < style td = "width: 178px" > < table >

  < /tr >

  < b >

  < style td = "" width: 178px "class = 'auto-style1' > Group catalogue: < table >"

  < style td = "" width: 375px "class = 'auto-style1' > < select name ="CatalogGroup"required ="Yes"message ="Please select a group of catalog">"

  < option selected = "selected" value = "#CatalogGroup #" > #Group # < / option > < / cfoutput >

  < cfoutput query = 'getGroups' >

  < option value = "#ID #" > #Group # < / option >

  < / cfoutput >

  < / select > < table >

  < style td = "" width: 105px ' class = "' auto-style1 > < table >"

  < /tr >

  < b >

  < style td = "" width: 178px "class = 'auto-style1' > species: < table >"

  < style td = "" width: 375px "class = 'auto-style1' > < cfoutput query ="getProducts"> < select name ="Species">"

  < option selected = "#Species #" > #Species # < / option >

  < option value = "Birds & poultry" > birds & poultry < / option >

  < option value = "Caged Bird" > Caged Bird < / option >

  < option value = "Canine" > Canine < / option >

  < option value = "Cattle" > cattle < / option >

  < option value = "Deer" > deer < / option >

  < option value = "Equine" > equine < / option >

  < option value = "Cat" > Feline < / option >

  < option value = "Fish" > fish < / option >

  < option value = "Goat" > goat < / option >

  < option value = "Llama and alpaca" > llama and alpaca < / option >

  < option value = "Rabbit" > rabbit < / option >

  < option value = "Sheep" > sheep < / option >

  < option value = "Swine" > swine < / option >

  < option value = "Wild birds" > wild birds < / option >

  < option value = ' Multi/All' > Multi/All < / option >

  < / select > < table >

  < style td = "" width: 105px ' class = "' auto-style1 > < table >"

  < /tr >

  < b >

  < td bgcolor = "##FFFFCC" style = "width: 178px" > product type < table >

  < td bgcolor = "##FFFFCC" style = "width: 375px" > < select name = "ProductType" required = "Yes" message = "Please select a product Type" >

  < option selected = "selected" value = "#ProductType #" > #ProductTypes_ProductType # < / option > < / cfoutput >

  < cfoutput query = "getProductType" >

  < option value = "#ID #" > #ProductType # < / option >

  < / cfoutput >

  < / select > < table >

  < td bgcolor = "#FFFFCC" style = "width: 105px" > < table >

  < /tr >

  < b >

  < style td = "width: 178px" > < table >

  < style td = "width: 375px" > < table >

  < style td = "width: 105px" > < table >

  < /tr >

  < b >

  < style td = "width: 178px" > < table >

  < td > < input type = "submit" value = "Update" > < table >

  < style td = "width: 105px" > < table >

  < /tr >

  < b >

  < style td = "width: 178px" > < table >

  < style td = "width: 375px" > < table >

  < style td = "width: 105px" > < table >

  < /tr >

  < /table >

  < / make >

  Here's my action page:

  < cfdump var = "# FORM #" >

  <!--> update product data
  < cfif IsDefined "(FORM. ProductID") >

  < cfquery datasource = "farmky" name = "updProducts" >
  UPDATE products
  WHERE ProductID = #FORM. ProductID #.
  < / cfquery >

  < / cfif >

  < cflocation url = "products_master.cfm" >

  Guess what it was... a *' lack of equal sign;

  name "ProductID" value = "27" / >

  Watch this kind of stuff long enough and you can't see the obvious cause, you're too fixed on the search for the strange. Thanks for your help ilssac!

• My computer motherboard laptop disappeared. Connected my hard drive to another laptop but still, no data is found, nor my hard drives are detectable? Very depressing and need the data. Help, please

  My laptop broke down (motherboard, Gone) and is not repairable. The technician took my hard MovieFrame and there is a very important document that I need very badly. I bought a proper case and connected my hard drive to another laptop but unfortunately no data can be found, nor my hard drives are detectable? I am very depressed and need the data. Please helllllllllllllllllllllllllllllllllllllllllllppppppp

  Hi Adel Bushager,

  I suggest you contact the store local tech or the manufacturer of the system to help with recovery of data from the hard drive.

  Hope this information is useful.

• How can I update, insert into existing data staged in Oracle Disqualification reference data. Help, please

  Nice day

  I created data staging of the data store (server and category: Oracle database). Now the same staging data, I created reference data.

  I created work processes to regularly update tiered real data but the same updates should also reflect in the reference data.

  Is there a profile that I can use to update live data in the reference database. Please help me.

  Thank you

  Kind regards

  Muhammed Faraz

  Hello

  Versions 11.1.1.7.4 Disqualification and 12.1.3 allow writing data directly in the process. Previous versions are not, although they allow you to use the research on the staged data that can then be used as a reference with the same features except that it is not editable in the tree.

  Kind regards

  Mike

• Data merge help please!

  First of all, let me say that I am quite new in InDesign, so this can be pretty basic for you, but I'm going to be as accurate as possible.  I am putting together a directory of photos simple enough for our Church and has serious problems with the InDesign data merge.  I have my numbers (Excel) document divided into fields and saved in a .csv file, I am able to select it as the source document and provide the information in my target document.  The problem I encounter is that no matter what I do it's split up my data in separate documents.

  Thus, for example, I have my source list .csv file as follows (more detailed but it is the base):

  Name, address 1, address 2, phone 1

  SMITH, John, 123 random circle, any where, USA 12345, 555-1212

  Now I have my destination InDesign document what follows, clicked on directly from my window of data merge:

  < < name > >

  < < address 1 > >

  < < address 2 > >

  < < Phone 1 > >

  However, my overview displays the following text:

  SMITH, John

  Random circle 123

  Nothing else shows until I click on the tab 'next' for the next document, and then it will show:

  Any where

  USA 12345

  555-1212

  And as a result this page it with the email address... will follow that back to return to the next entry in my database.

  Suggestions?  Ideas?  I was wondering if it has something to do with commas... but I tried going one last, address 1, city, State, Zip format first and it still will fill part of address at a time.  I'm just at my wit's end... Please help!

  For a multiple recorsd merger you must configure exactly a set of placeholder fields ID will dupicate them, as well as the rest of the page (if set up on the page of the document) as many times that can hold using the spacing you specify. If the fields are on the master page, other things on the master page, like headers and footers, will not be duplicated. Many beginners tripped upwards on how to implement a merger of several record.

• IPhone DEAD data transfer help

  My old iPhone was ruined by a faulty repair shop, I want to buy a new phone and transfer my old data to it. How do I do that?

  PS My old iPhone has everything saved on iCloud or itunes

  You haven't, if you don't have to store the data anywhere else.

  The data must be somewhere to put on a new phone.

• I have a hp compaq pressario c797ee, I not create recovery disk and lost data. Help, please.

  I not create recovery disks, in fact could not create because the DVD could not be the installation program appropriate for the burn. When I realized how do it, I had already deleted the recovery partition and had lost data recovery. The name of product HP Compaq pressario C797ee, the operating system is Windows Vista Home Basic Edition. Please tell me the link where I can download the recovery disks from which any alternative appropriate.

  Hello

  Please use this:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00810334

  Kind regards.

• Generate report with a date picker. Help, please

  Hello

  I'm building an interactive report which should display the records corresponding to the date picker.

  I'm going to pull a report emp_name and LOAD_DT.  LOAD_DT is a date column from table1.

  Select "emp_name," LOAD_DT from table1

  where LOAD_DT =: P44_PICK_A_DATE;

  I chose article page to submit P44_PICK_A_DATE

  When I choose a date, he gives no error data

  Help, please.

  Thank you

  KJ

  Bind variable in the APEX will behave as strings. I normally apply TO_DATE(:P1_MY_DATE) without the date format and rely on application session formats / align.

  In your case, it would be more efficient to

  where load_date = to_date(:P44_PICK_A_DATE)

  unless you do something specific with date formats, then you would be just details the to_date

  Keep in mind, this also applies to the numbers, it would be more explicit

  where id = to_number(:P1_ID)

  Which is related to why there is a function v() and nv().

• I have a macbook pro: 2.3 GHz Intel Core i5, 4 GB of 1333 MHz DDR3 Ram. 10.7.5 version. When I open some websites, I get a message that web browser is obsolete. I use safari. When I do a software update, it says that the software is up-to-date. Help, plea

  I have a macbook pro: 2.3 GHz Intel Core i5, 4 GB of 1333 MHz DDR3 Ram. 10.7.5 version. When I open some websites, I get a message that web browser is obsolete. I use safari. When I do a software update, it says that the software is up-to-date. Help, please.

  Safari maxes in a version of Mac OS x.  New version of Mac OS x would be needed for the new version of Safari.

  Firefox is not limited within an OSX and probably has a version that works.  Chrome may as well but is a Devourer of resources.  Opera is a third option.

• Constant BSOD! Help, please!

  Get the constant BSOD stops. More than 5 - 10 times a day! I have no idea, and also my knowledge, everything is up-to-date. Help, please! :(

  Here is a link to my most recent minidumps.

  Current Minidumps link

  http://www.mediafire.com/download/76d7v7z904d6o46/CrashMinidumps.7z

  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  
  Don't forget to download any other DMP files (especially those running auditor)

  If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Get it here
  Boot from the CD and let it run at least 5 or 6 passes.
  Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.
  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  But sometimes it will crash and will not tell you the driver.
  Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems.
  Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  Click Start and type "auditor" (without the quotes) and press enter
  Select 'Create a custom settings (for code developers)' and click 'Next' (or Type "check/standard/all" (without the quotes) If you want to check each of them (this will slow down your computer))

  Choose "Select custom settings from a full list" and click "Next".
  Select the entire document except for "Low resource Simulation" to win 8 do not check concurrency stress test and the verification of the conformity of DDI, click "next".
  Select "Select driver names from a list", then click "next".
  Select all drivers that are NOT provided by Microsoft, and then click "Next".
  On the next page, select "Finish".
  Restart the system and wait as he crashed to blue screen.
  Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  If you are unable to Windows because it crashes too early, try safe mode.
  If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  Further reading
  http://support.Microsoft.com/kb/244617

  Words of driver verifier
  
  Information check driver driver Windows Vista - Microsoft Search Verifier
  Questions of Verifier within Vista / Windows 7 http://support.microsoft.com..default.aspx?+verifier1&res=20
  Pilot feature pool http://support.microsoft.com/kb/188831

• My browser is running do not. I uninstall, install several times. Uninstall cookies, delete the data from the user, install in another user - no reaction. What's wrong? Help, please

  My browser is running do not. I uninstall, install several times. Uninstall cookies, delete the data from the user, install in another user - no reaction. What's wrong? Help, please

  Start Firefox in Safe Mode {web link} by holding down the < shift >
  (Mac options) key and then from Firefox. Is always the problem?

  Start your computer in safe mode with network. Then launch Firefox.
  Try the sites secure web. Is always the problem?

  Start the computer in Mode safe;
  Free online encyclopedia