Database not available

Similar Questions

• Bug in "DBSS" - not available on a database mirror? Or a real failure?

  Does anyone else make false positives on 'DBSS' rule - not available for mirrored databases?

  Once every week or two I get a fatal alert "Not available" for the 'DBSS' rule - not available on all databases mirrored to my server.  It takes only a few minutes in Foglight, then goes back to a normal state.

  I looked at the newspaper database monitoring for the mirror and the principle, all SQL server and Agent logs, all the server event logs... nothing.  The history of all mirrored databases have no signs of availability according to the real itself SQL Server issues.

  The only reference to this rule Foglight is:

  https://support.quest.com/search/SolutionDetail.aspx?ID=SOL76183

  Go through the article, I looked at the data stored in the "DB" State for the affected databases, it says "Not available" for the times, that the alert has developed.  However, I can't find anywhere on the current SQL Server where this error can come.

  I have not particualrly want to go rushing to false positives fatal alert indicating that my mirror is not available

  Any thoughts on what I might try?  Everyone knows about this problem?

  Or is this just a blip?

  See you soon,.

  Paul

  Thank you, Paul.

  We opened a proof of support as well.  It turns out that we have the updated version of the cartridge, is currently under investigation.

  Brian

• ORA-38754: FLASHBACK DATABASE not started; required redo log is not available

  Hello

  I am getting below error when executing the activities of flashback. Currently we have backups, so when I tried the command flashback in RMAN my question solved.

  But if I want to do the same thing using SQLPLUS what steps should I take?

  ERROR:

  ORA-38754: FLASHBACK DATABASE not started; required redo log is not available

  ORA-38762: redo logs needed for SNA to SNA 20062842936 20062842926

  ORA-38761: redo log sequence 4 in thread 2, 65 incarnation cannot

  consulted

  DATABASE:11.2.0.3.0 (UAT)

  RMAN will automatically restore logs archived redo required for the operation of blowback when they are not present on the drive, while (as meyssoun said) when using sqlplus required archived redo logs must be available on the disc.

  Concerning

  AJ

• Database Oracle ORA-01034 starts do not: ORACLE not available and ORA-27101

  Dear Sir.
  
  today I rebooted (GR 11, 2) database server after the database service does not start, the error message is
  
  ERROR:
  ORA-01034: ORACLE not available
  ORA-27101: shared memory realm does not exist
  Linux-x86_64 error: 2: no such file or directory
  Process ID: 0
  Session IDs: serial number 0: 0

  http://www.krenger.ch/blog/ora-00845-memory_target-not-supported-on-this-system/

• Remove a database option is not available in the wizard DBCA

  Hello
  
  I have 11v3 of HP - UX. I installed Oracle Standard Edition 10.2.0.1 and after that, I installed 10.2.0.4 Patch Set.
  I configured the two databases using DBCA. At the end I save scripts (not create database) and run the shell script.
  The databases are running.
  
  I tried to delete a database using DBCA, but option delete a database (and also "set up the Option database") are not available, they are grey.
  
  What is the problem? What should I do to get the opportunity to delte the two DBCA databases?
  
  Kind regards
  Lovro

  Pavli wrote:
  Hello

  I have 11v3 of HP - UX. I installed Oracle Standard Edition 10.2.0.1 and after that, I installed 10.2.0.4 Patch Set.
  I configured the two databases using DBCA. At the end I save scripts (not create database) and run the shell script.
  The databases are running.

  I tried to delete a database using DBCA, but option delete a database (and also "set up the Option database") are not available, they are grey.

  What is the problem? What should I do to get the opportunity to delte the two DBCA databases?

  Kind regards
  Lovro

  DBCA reads the ORATAB UNIX file to determine which databases exist to be deleted (and DBUA did the same thing to determine which databases are to be upgraded). Most likely the ORATAB file contains no entry without comment for your database.

  Niall Litchfield
  http://www.orawin.info/

• If the parent database is not available

  Hi masters Oracle
  
  I have script below, I would add a pice of code that actully check and stop the script if the parent database (TEST) is not available.
  Can you please guide me aur modified script below.
  
  # Connect to the 'TEST' database and run the scripts to update of the
  # waiting for database that now must be open on read - only mode
  echo "'date': from the updating of the schema to user_rep...» »
  export ORACLE_SID = TEST
  sqlplus/nolog < < EOF
  user_rep/password login
  set echo on
  coil $SPOOL_FILE append
  @user_rep.refresh.sql
  spool off
  EXPRESSIONS OF FOLKLORE
  
  Thanks in advance.

  Prashant,

  This is a double post. close this message and use suggestion posted in your previous post and let us know I fyou have any questions.

  Concerning

• Setup of the 4.1.0 IVI compliance 'Photos E:\My' package error is not available

  I try to install ICP4.1, on the XP machine without maps OR or the software installed.

  The installer says:

  This installer needs to access "my images". However, this 'E:\My Photos' location is not available. Make sure that this directory exists and is available, and rerun Setup.

  I don't have any drive "E:\. » ! so I can't create it!

  OK, I found the problem!

  I needed to add this to the registry database:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders\My photos

  must be set to %USERPROFILE%\My Documents\My Pictures

  with type REG_EXPAND_SZ

• Tags created in the Windows Photo Gallery are not available in xp.

  I have marked all my 30 000 photos in Windows Photo Gallery. My Vista computer is dead and the tags are not available in XP. Is there a way to access all the tags, I created in order to sort and display them by tags.

  I have marked all my 30 000 photos in Windows Photo Gallery. My Vista computer is dead and the tags are not available in XP. Is there a way to access all the tags, I created in order to sort and display them by tags.

  ========================================
  As Anteaus... some or all tags have
  archived only in the exclusive Pictures.pd4' or 'Pictures.pd5 '.
  file of database "Windows Photo Gallery" / "Windows Live Photo
  Gallery "... but... If you have not installed Windows Live Photo
  Gallery on your XP machine, it may be worth a try.

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• ORA-01034: ORACLE not available ORA-27101: Kingdom is no Linux-x86_64 shared memory error: 2: no such file or directory process ID: ID of Session 0: 0 serial number: 0

  Hello

  In our society, we have oracle server on Suse Linux with two instances TETA and TETA201.

  One day on a server broke down, because there is no free space due growing files 'archivelog.

  After that I manually deleted several older archivelog files, but after the reboot, the server error occurs when connecting to the database:

  "ERROR:

  ORA-01034: ORACLE not available

  ORA-27101: shared memory realm does not exist

  Linux x86_64 error: 2: no such file or directory

  Process ID: 0

  "Session ID: serial number 0: 0"

  $ ORACLE_SID is set to TETA, if export it to TETA201 connection works correctly

  Oracle service startup there is no errors but only one instance is running TETA201 works correctly

  #############################################################################

  # Beginning of start O R A C L E section #.

  #############################################################################

  PARAMETERS from/etc/sysconfig/oracle

  -Set the Oracle kernel settings: Yes

  -Start the Oracle Listener: Yes

  -Start the Oracle database: Yes

  -Start the Oracle Web server: no

  -Start Oracle EManager: Yes

  -Start Oracle iSQLPLUS Manager: Yes

  -Start Oracle Agent: no

  -Start Oracle Internet Filesystem: no

  -Run Oracle Directory Manager: no

  Can not find required file: isqlplusctl - START_ORACLE_DB_ISQLPLUS setting = no

  Undefinied Agent Oracle or not properly configured. Please check.

  Setting the parameters of the kernel for Oracle, see the file

  / etc/sysconfig/Oracle of explanations.

  Shared memory: SHMMAX = SHMMNI(5) 3294967296 = 4096 SHMALL 2097152 =

  Semaphore values: SEMMSL = 1250 SEMMNS = 32000 SEMOPM = 100 SEMMNI = 256

  Other values: FILE_MAX_KERNEL = 131072 IP_LOCAL_PORT_RANGE = 1024 65000

  RMEM_DEFAULT = 4194304 WMEM_DEFAULT = 262144 = 4194304 = 262144 WMEM_MAX RMEM_MAX

  Huge pages:

  ULIMIT values: MAX_CORE_FILE_SIZE_SHELL = unlimited

  FILE_MAX_SHELL = 65536 = 16384 PROCESSES_MAX_SHELL

  Kernel defined for Oracle parameters: fact

  -Start listener... done

  + From databases...

  Start entry for SID TETATEST to /oracle/product/11.2.0/dbhome_1/ inskippedratab

  Database instance "TETA" of treatment: save the /oracle/product/11.2.0/dbhome_2/startup.log file

  Instance of database 'TETA201' of treatment: save the /oracle/product/11.2.0/dbhome_1/startup.log file

  Status of Oracle database start: fact

  -Starting Apache... unused

  -From unused application server

  -From Application Server Console... unused

  -Start of Agent... unused

  -From Enterprise Manager...

  DB console departure for TETA starting DB Console for TETA201 done

  -Jumped from iSQLPLUS Manager...

  -From... unused Oracle Internet file system

  -From Oracle Internet Directory... unused

  #############################################################################

  # End of O R A C L E section #.

  #############################################################################

  #############################################################################

  # End of O R A C L E section #.

  #############################################################################

  /Oracle/product/11.2.0/dbhome_1/startup.log

  
  

  SQL * more: Production of the version 11.2.0.3.0 on Mon Jan 18 11:43 2016

  Copyright (c) 1982, 2011, Oracle.  All rights reserved.

  SQL > Polaczono.

  SQL > ORACLE Instancja zostala zamknieta.

  SQL > Odlaczono od Oracle Database 11g Release 11.2.0.3.0 - 64 bit Production

  SQL * more: Production of the version 11.2.0.3.0 on Mon Jan 18 11:43:01 2016

  Copyright (c) 1982, 2011, Oracle.  All rights reserved.

  SQL > connect to an idle instance.

  SQL > ORACLE instance started.

  Total System Global Area 1043886080 bytes

  Bytes of size 2234960 fixed

  603981232 variable size bytes

  432013312 of database buffers bytes

  Redo buffers 5656576 bytes

  Baza danych zostala zamontowana.

  Baza danych zostala otwarta.

  SQL > Odlaczono od Oracle Database 11g Release 11.2.0.3.0 - 64 bit Production

  /Oracle/product/11.2.0/dbhome_2/bin/DBSTART: warm welcome of the instance 'TETA201' database has started.

  /Oracle/product/11.2.0/dbhome_2/startup.log

  
  

  PON sty 18 11:42:52 THIS 2016

  SQL * more: Production of the version 11.2.0.4.0 on Mon Jan 18 11:42:52 2016

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  SQL > connect to an idle instance.

  SQL > ORACLE instance started.

  Total System Global Area 4175568896 bytes

  Bytes of size 2259840 fixed

  1409287296 variable size bytes

  2751463424 of database buffers bytes

  Redo buffers 12558336 bytes

  Baza danych zostala zamontowana.

  ORA-03113: end of file on communication channel

  Māju ID: 10080

  Sesji ID: 33, serial number: 3

  SQL > Odlaczono od Oracle Database 11g Release 11.2.0.4.0 - 64 bit Production

  /Oracle/product/11.2.0/dbhome_2/bin/DBSTART: hot "TETA" database instance started.

  Linux: ~ # service oracle State

  #############################################################################

  # Begin State O R A C L E section #.

  #############################################################################

  Kernel parameters

  Shared memory: SHMMAX = SHMMNI(5) 3294967296 = 4096 SHMALL 2097152 =

  Semaphore values: SEMMSL, SEMMNI, SEMMNS, SEMOPM: 1250 32000 100 256

  Database Instances

  TETA instance is out of service (autostart: Y)

  Instance of TETATEST is broken (autostart: N)

  TETA201 of the instance is declining (autostart: Y)

  AMT-listener: to the top

  Webserver (Apache httpd): low (0 process)

  List of processes by user oracle:

  PID TTY STAT TIME COMMAND

  9855?        SSL 0:00 /oracle/product/11.2.0/dbhome_2/bin/tnslsnr LISTENER

  10128?        SS 0:00 ora_pmon_TETA201

  10130?        SS 0:00 ora_psp0_TETA201

  10132?        SS 0:00 ora_vktm_TETA201

  10136?        SS 0:00 ora_gen0_TETA201

  10138?        SS 0:00 ora_diag_TETA201

  10140?        SS 0:00 ora_dbrm_TETA201

  10142?        SS 0:00 ora_dia0_TETA201

  10144?        SS 0:00 ora_mman_TETA201

  10146?        SS 0:00 ora_dbw0_TETA201

  10148?        SS 0:00 ora_lgwr_TETA201

  10150?        SS 0:00 ora_ckpt_TETA201

  10152?        SS 0:00 ora_smon_TETA201

  10154?        SS 0:00 ora_reco_TETA201

  10156?        SS 0:00 ora_mmon_TETA201

  10158?        SS 0:00 ora_mmnl_TETA201

  10166?        SS 0:00 ora_qmnc_TETA201

  10338?        SS 0:00 ora_cjq0_TETA201

  11195?        SS 0:00 ora_q000_TETA201

  11197?        SS 0:00 ora_q001_TETA201

  #############################################################################

  # End of O R A C L E section #.

  #############################################################################

  Help, please

  RMAN target /.

  RMAN > startup mount;

  RMAN > overlap archivelog all;

  RMAN > delete archivelog expired;

  RMAN > alter database open;

• Payroll Online gives "the selected action is not available. The cause may be related to security"error

  Hello world

  We are in the HRMS Oracle 12.1.3 using 12 c database and try to understand this employee self-service - payroll can be used.

  However, it gives the error "the selected action is not available. Them may be security-related.

  Please notify.

  Thank you

  Elmer

  Hey Elmer,

  We are also in 12.1.3 and I searched HR% SS_FUNCTIONS_SEED and I had the time of 243 cases.

  You need to find the Menu not the name of the user Menu. Screenshot below shows one of the results

  

• Cisco ASA5505. Not available through the firewall identity web services

  Hello, everyone!

  Then put the puzzle patterns to ensure that users are connected using AD and went to the internet.

  Given Cisco ASA 5505. On the domain controller expected agent AD (which says dc - up and customer - facing upwards), ASA quietly takes user connections.

  IP addresses on the network are distributed by DHCP, which is triggered on a domain controller.

   

   

   

  The essence of the problem is that, after the authentication of the user online falls after awhile. That is the user logged on to the computer, and then open the browser, open a few sites, then went 5-7 minutes of inactivity, and Internet is not available. Internet appears when the reconnection of the user at a certain time or the computer disable "LAN network connection" for 1 minute. You don't have to dig?

  This configuration on the SAA as follows:

  object-group user ACTIVE_ALLOW
 user-group DCU\\CASA61_Allow
 user DCU\User1
 user DCU\User2access-list inside_access_in_1 extended permit ip object-group-user ACTIVE_ALLOW
192.168.1.0 255.255.255.0 any log debuggingaaa-server ADA protocol radius
 ad-agent-mode
 interim-accounting-update
 reactivation-mode depletion deadtime 1
 merge-dacl after-avpair
aaa-server ADA (inside) host dc61-01
 key *****
 radius-common-pw *****
 no mschapv2-capable
aaa-server AD protocol ldap
 reactivation-mode depletion deadtime 1
aaa-server AD (inside) host dc61-01
 ldap-base-dn dc=DCU,dc=local
 ldap-scope subtree
 ldap-naming-attribute sAMAccountName
 ldap-login-password *****
 ldap-login-dn CN=CISCOASA61,OU=Users_MC,dc=DCU,dc=local
 server-type microsoft
user-identity domain DCU aaa-server AD
user-identity domain DC61-01 aaa-server AD
user-identity default-domain DCU
user-identity action domain-controller-down DCU disable-user-identity-rule
no user-identity action mac-address-mismatch remove-user-ip
no user-identity inactive-user-timer
user-identity logout-probe netbios local-system probe-time minutes 60 retry-interval seconds 5 retry-count 5 match-any
user-identity poll-import-user-group-timer hours 12
user-identity ad-agent active-user-database full-download
user-identity ad-agent aaa-server ADA
user-identity user-not-found enable

  At this point, while writing this message here (20 min), 1 hour from the Internet threw.

  Hello;

  Remove the NetBios sensors and see if the problem goes away.

  Mike.

• expdp ORA-39213: treatment of metadata is not available

  -bash-3, $ 2 expdp patterns userid=vertex64@orcl2 = directory = DB_DUMP filesize = 1 vertex64 G dumpfile=exp_vertex64_26022014_%U.dmp logfile = log_vertex64_26022014.log

  Export: Release 11.2.0.2.0 - Production on Thu Feb 27 10:48:09 2014

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  Password:

  Connected to: Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  With partitioning, Real Application Clusters, Automatic Storage Management, OLAP,.

  Options of Data Mining and Real Application Testing

  ORA-39006: internal error

  ORA-39213: treatment of metadata is not available

  one suggests how to troubleshoot or what is the problem

  SQL > SELECT identifiant_composant, version, dba_registry;

  STATUS OF THE VERSION ID_COMP

  ------------------------------ ------------------------------ --------------------------------------------

  OWB 11.2.0.2.0 VALID

  APEX 3.2.1.00.12 VALID

  EM                             11.2.0.2.0                     VALID

  AMD 11.2.0.2.0 VALID

  SDO 11.2.0.2.0 VALID

  ORDIM 11.2.0.2.0 VALID

  XDB 11.2.0.2.0 VALID

  CONTEXT 11.2.0.2.0 VALID

  EXF 11.2.0.2.0 VALID

  RUL 11.2.0.2.0 VALID

  OWM 11.2.0.2.0 VALID

  CATALOGUE VALID 11.2.0.2.0

  CATPROC 11.2.0.2.0 VALID

  JAVAVM 11.2.0.2.0 VALID

  XML 11.2.0.2.0 VALID

  CATJAVA 11.2.0.2.0 VALID

  APS 11.2.0.2.0 VALID

  XOQ 11.2.0.2.0 VALID

  RAC 11.2.0.2.0 VALID

  -bash-3, $2 sqlplus / as sysdba

  SQL * more: Production of liberation 11.2.0.2.0 Thu Feb 27 11:02:48 2014

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  With partitioning, Real Application Clusters, Automatic Storage Management, OLAP,.

  Options of Data Mining and Real Application Testing

  SQL > execute dbms_metadata_util.load_stylesheets

  PL/SQL procedure successfully completed.

  SQL > exit

• Not available for the 11.2.0.2.0 SUPPRESSTRIGGERS?

  I want to delete triggers in my replicat, so I try the following in my settings:

  replicat myRepl

  assumetargetdefs

  dbOptions deferrefconst suppresstriggers

  username myUser, password myPw

  card schema_1.*, target schema_2.*;

  But the replicate does not start, and I get the following in the ggserr.log:

  ERROR OGG - 017646 Oracle GoldenGate for Oracle delivery, myrepl.prm: support for the suppresstriggers parameter is not available in the version of RDBMS you're using.

  If I remove the suppresstriggers, the replicat starts.  According to the reference Guide:

  "... You can use this setting for Oracle 10.2.0.5 and later patches for Oracle 11.2.0.2 and later, instead of manually disable triggers. To use this option, replicate user must be an administrator Oracle Streams, which can be granted by calling dbms_goldengate_auth.grant_admin_privilege. The default value is NOSUPPRESSTRIGGERS. »

  I ran the dbms_goldengate_auth.grant_admin_privilege.  In fact, I tried to grant all privileges, but still no luck.

  I'm using the version of Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit on SunOS 5.10 on sparc sun4v

  I'm under Oracle GoldenGate version 11.2.1.0.3

  Can anyone provide any indication as to why I can't include the suppresstriggers in my replicat?  Can someone tell me how to disable the triggers can be handled differently?

  Thanks in advance for any info!

  Yes. You are right. I do not see properly. One more possible reason, that I could find is that you mention the SUPPRESSTRIGGERS option after DBLOGIN.  So try using this settings replicate file.

  replicat myRepl

  username myUser, password myPw

  assumetargetdefs

  dbOptions deferrefconst suppresstriggers

  card schema_1.*, target schema_2.*;

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• ORA-16014: connect 2 sequence # 283 not archived, not available destinations

  When you try to start my database shows my journal alerts

  ORA-16014: connect 2 sequence # 283 not archived, not available destinations

  ORA-00312: wire 2 1 online journal: ' / home/app/oracle/oradata/PRIMARYP/redo02.log'

  I can get the ok of the instance, but not actually open the database

  My db_recovery_file_dest_size is 22 GB and and the mount point defined by db_recovery_file_dest has pleanty of free space

  Also

  Select *.
  v $ recovery_file_dest;

  sufficient free space of FRA - shows

  NAME

  --------------------------------------------------------------------------------

  SPACE_USED SPACE_RECLAIMABLE NUMBER_OF_FILES SPACE_LIMIT

  ----------- ---------- ----------------- ---------------

  / Home/app/Oracle/fast_recovery_area

  + 10 5506131968 3297617408 159 2.3622E

  Select error
  v $ archive_dest;

  shows no errors

  Can anyone help!

  Thanks, Jim

  The broker indeed seems to have changed all parameters of LOG_ARCH_DEST_n when I did a swap / switchback using the PRIMARYP and STANDBYP databases.

  Data not archived clear alter logfile Group 1;

  indeed to create a space that was insoluble. I had to rebuild / recover the standby

  Jim