Database to point different oracle_home on the same server

Similar Questions

• You can run several APEX headphones for different instances on the same server

  Please confirm that we can run several APEX headphones for different instances on the same server?  It is a configuration of xml configuration or do we need to do more?

  
  

  Thank you

  
  

  Tony Miller

  SmartDog Services

  Austin, TX
  

  Hello

  With last listener APEX, you can configure multiple databases

  Oracle Application Express listener configuration

  Is that what you mean?

  Kind regards
  Jari

• Restore the backup with a new name and a different location on the same server

  Hi all
  
  I did a complete backup of my current PROD. Is it possible to restore the database on the same server, but with a different instance name, db_name and on another location?

  PRM says:
  Hi all

  I did a complete backup of my current PROD. Is it possible to restore the database on the same server, but with a different instance name, db_name and on another location?

  If you use RMAN my awnser is not.

  You cannot change the name of the database before open resetlog.

  But you can make this work without problem using the same server.

  You will need to change some parameters.

  Create a PFILE from SPFILE (prod) change parameter 'db_unique_name' file new name (ex TEST).

  Change all the value of PROD TEST except db_name parameter must be PROD.

  CREATE a SPFILE from this PFILE (spfileTEST.ora)
  Create a new password file (orapwTEST)

  So you can start this new Instance_name (TEST).

  Restore the PROD to TEST instance database, you will need use set new name to the file data or database (depends on which version you use)

  Retrieve the instance PROD database (TEST)

  It is time to open resetlogs...
  !!!!!!!!!!!!!!!!!!!!!!!!!!!! ATTENTION HERE!

  You need change redo log location before open resetlogs, you must query v$ logfile member column and change it to another location.

  After change you can open resetlog.

  Now its time to change name of database.

  Stop and start Mount

  Use the NEST

  NEST target=sys/password@instance DBNAME = TEST

  When this process is complete, NEST will be closing database.

  So you will need to start with nmount change db_name to the TEST and reset the parameter 'db_unique_name' (alter system reset db_unique_name)

  Then stop and start upstairs question OPEN DATABASE RESETLOGS and is done.

  HTH,
  Levi Pereira

  Published by: Levi Pereira on August 27, 2012 13:09

• Use the UPD in different Versions on the same server

  Hello

  We're about to update some things on our print server (eg. name, queue) and want to upgrade the driver as well. A week to use two different versions of the UPD, at the same time on the same server.

  Is it possible or will that get us in trouble?

  I would recommend this ad in the Forums of HP Enterprise Support for better coverage, given that this may happen there anymore, it's here on the forums of consumers.

  You can access support at the following link enterprise forums.

  http://h30499.www3.HP.com/

• Clonning an ASM database on the same server with different names of sid.

  Hello people!
  
  I tried to clone an existing database on the same host with a different name with no luck.
  
  I tried what 415579,1 reccomends, but, when I reached the RESTORE CONTROLFILE from clause that it fails since this process the old and the new database must be the same. I don't want that. I want a separate copy, not a database of pending. There are other people in the company who will use this database, and I just want to replicate it.
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure to modify the order db at 26/05/2009 14:51:15
  ORA-01103: the name "OLD_DB_NAME" in the control of the database file is not "NEW_DB_NAME".
  
  I want to just clone a database with a different name, in the same way we used to do with ALTER DATBASE BACKUP CONTROLFILE to TRACE-> COPY DB_FILES-> RECREATING CONTROLFILES WITH a DIFFERENT NAME DATABASE.
  
  Exp/imp it's a possible solution, but I wonder if it is just another way to clone an existing database in the same node with a different namedo with RMAN? Just as we used to with BACKUP CONTROLFILE to TRACE-> DBF_FILES-> RECREATING CONTROLFILES WITH DB NAME DIFFERENT COPY.
  
  It's the links I tried to follow without success.
  
  http://www.Oracle.com/technology/deploy/availability/PDF/asm_cloning.PDF
  Duplicate by RMAN 10 g
  
  and many others...
  
  Thanks for your help.
  Alex.

  You'll need an auxiliary copy if you restore the database to a different name.
  Take a look at the following note:
  http://jhdba.WordPress.com/2009/04/02/cloning-a-database-ASM-to-ASM/

• WebDAV: use of the different logins to different WebDAV folders on the same server

  Hello

  I quite often use WebDAV to access the various folders on a server on the Internet. I do this "Add a network location" in Windows Explorer, then using the address https Server (for example https://www.myserver.com/folder1). The first time that I need to enter the credentials of the user and the corresponding password and Windows seems to store them somewhere so that I can connect to this folder also after a re-login without having to re - insert my credentials.

  The question I have, is that I also need access to different folders on the same server (for example https://www.myserver.com/folder2) that requires different user credentials and passwords. The only way I have found is to remove the first network location, disconnect and reconnect to the Windows and then add the new location of the network in Windows Explorer; Just delete the first network location and adding the second network location would not be enough that Windows had always stored the context of the 1st network location and tried to connect with the credentials of the user and the password of the 1st second.

  Question: is there a less cumbersome way to remove context from a WebDAV connection, so that I do not need to disconnect and reconnect if I need to connect to the same server with different user credentials?

  Thank you very much

  Johannes

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Multiple instances of oracle with characterset different on the same server database

  Hello

  We are finalizing plans to install Automic (software scheduliong formerly UC4) for our suite of retail applications and replace Uc4.

  The process came to know that Automic does not support AL32UTF8 database characterset.

  At this moment we have RMS and UC4 UC4 supports AL32UTF8 and schema for UC4 running on the same database server is inside the RMS database.

  From now on, it is recommended to have a separate database instance on the same server as the RMS database and with a different characterset which is WE8MSWIN1252.

  Is it possible to have 2 instances of database running with different charactersets, one with AL32UTF8 and the other with WE8MSWIN1252. ?

  There are configuration requirements before implementing instances of database?  THS APPWORX (for UC4) schema will be exported (data pump export) and imported into the new database.

  The utility Automic we want to use is not compatible AL32UTF8 and manage only a database of character set WE8MSWIN1252.

  Any help and advice would be much appreciated.

  Thank you

  RAM.

  PL post OS and database versions.

  Is it possible to have 2 instances of database running with different charactersets, one with AL32UTF8 and the other with WE8MSWIN1252. ?

  Yes - without any doubt - two databases are independent and have nothing to do with each other.

  There are configuration requirements before implementing instances of database?  THS APPWORX (for UC4) schema will be exported (data pump export) and imported into the new database.

  You may have - to test the export/import process rigorously. If your source is AL32UTF8 and target is WE8MSWIN1252, data loss may occur for those characters that are in the former, but not the last.

  HTH
  Srini

• Running the Single Instance and RAC on the same server of different homes.

  Hi guys,.

  I already have 4 node RAC12c installed on OLE 6.

  I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.

  Please correct me here if I am wrong...

  My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.

  Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.

  Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?

  2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?

  Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.

  K

  Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.

  See you soon,.
  Brian

• Several instance to the same server with same ORACLE_HOME and same SID

  Hello gurus, reduce costs my company looks to reduce the backup servers and the databases consolidade waiting on big 2 or 3 servers to reduce oracle licenses.
  It is that I have about 30 cases with SID same how to configure it to run as 10 instances with the same SID, ORACLE_HOME in the same machine? is this possible?
  
  will run oracle on unix HP - UX 11r2
  
  BR
  
  TI

  Right. Each database will have own SID. With multiply tnsnames.ora and listener.ora all have entries for each standby.

  If the folder structure is different from primary then the DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT parameters are used to convert to the new locations.
  These two taking input in two, the front of the location and the location after.

  Example:

  DB_FILE_NAME_CONVERT=('/u01/app/oracle/oradata/RECOVER2', '/u01/app/oracle/oradata/RECLONE','/u01/oradata/RECOVER2','/u01/oradata/RECLONE')
  LOG_FILE_NAME_CONVERT=('/u01/app/oracle/flash_recovery_area/RECOVER2', '/u01/app/oracle/flash_recovery_area/RECLONE')
  

  Standby for each primary SID can be all that you need. The DB_NAME parameter would be the same on both, but DB_UNIQUE_NAME would be different.

  Who is?

  So, if I have two PRIMARY and standby database, Eve will have its own password, its own file INIT file to its own directory structure (but it could be the same).

  Best regards

  mseberg

• How to run 2 different applications of the same Application Server

  Hello
  
  I would like to know how to run two different applications of the same Application Server with different databases?
  
  We use
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0
  Oracle Application Server 10g 10.1.2.0.2
  
  Kind regards
  
  Hassan

  You can have as much as you want, just your applications should have different names or URLs and point to a specific database (using data sources).

  Greetings.

• OK to install forms independent 10.2.1 on the same server as the database 10 g 2?

  Is it OK to install forms independent 10.2.1 on the same server as the database 10 g 2?
  
  According to the install for forms requirements check, I have until my kernel parameters of my original config that follows that install the values required for the database. Will I need to worry about these types of changes to the server on how it effects my current database?
  
  Thank you.

  Of course, there is no technical problem other than memory, drives, etc. constraints.

  We use these Frankenstein servers with a mix of Developer Suite and Oracle database of different development versions. Not the best situation, of course. Just be careful of path and ORACLE_HOME settings when doing things like patching with OPATCH since there is more than one instance in which these commands may apply.

  Published by: user577087 on August 28, 2008 01:24

• Is there a way to create a button etc to get different views of the same page?

  I have a page full of product images and wants to give the viewer an option to choose the size of the images on the page. So far, I just had two different pages with the same images and created a hyperlink button to switch between views. The reason why I want to get the two points of view on the same page, is I want to use the same name for each page. Muse won't let me create two pages with the same name, so now I have a parent page "Products" (with large images) and its child page "products 2" (with the small images) with a hyperlink linking them. "» This also creates a problem in the menus, since the 'product 2' does not have the active menu bar.

  I have the same problem with the creation of the site in different languages. I would like to make a simple drop-down list with options "Suomi" and "English". What I have to create two different sites in two different languages and have just the hyperlink connect for example home pages?

  Thanks for the tips!

  You can use any number of widgets to create online pop-overs / hover pods / galleries. Lightbox to the ToolTip, anything is possible. The language issue to indeed create individual sites and crosslink them.

  Mylenium

• He would work to have 3.2 and 4.2 on the same server of db with different web servers?

  Hello

  I have three existing environments which are 11g and Apex 3.2 on Linux (Dev, Test, Prod). I have also three front-end web servers that are Windows 2003 with IIS for Apex (Dev, Test, Prod)

  We have three new Windows servers running 2008 we upgraded to.

  So, my question is on the upgrade of Apex to 4.2 at the same time. I would like to have the new Windows Server (Dev), and then point to the same server to Linux as my old Windows 2003 db. And it points to the same instance of db. My goal would be to achieve production with this configuration and then just do a redirect to URL on the old Windows 2003 server and that it points to the new Windows Server 2008. In this way, that I wouldn't need to move data from one instance to another.

  Would this work? I have installed 3.2 and 4.2 on the same instance of db? A 3.2 Windows Server and have a pointed Windows 4.2 server on the same back-end server?

  APEX lives on the database instance. Run you the APEX on the database upgrades. The short answer to what I think is your question is No.

  I don't know what is the relevant motivation?

• Multiple vCenter on the same server database

  Hi all

  I'm migrating vCenter vCenter 5.5 5.1.

  Is it possible to use the same server SQL2008R2 for vCenter 5.5 database?

  Installation vCenter 5.5 database to the same server vCenter 5.1 will be will damage the 5.1 database? Use different database?

  What is the best way to secure the vcenter 5.1 during the installation of vcenter 5.5 database other than the database backup 5.1?

  Also does need seprate SSO database?

  Thank you...

  I used SQL dissferent account and vCenter was insalled on the new database without problems.

• How to divide the screen into two parts in order to see the two different parts of the same file? [Suggestion] [Android]

  I am Brazilian and I use Adobe Acrobat Reader DC a lot. I would suggest an implementation of features present in the PC, I missed a lot of things on Android, which is 'New window' or something like that, like split the screen into two parts in order to see the two different parts of the same file.

  For smartphones, its use is restricted, but for tablets, it can be really useful, because it allows the display of two distinct points of the same file,

  I have reduced considerably the use of paper using this application, however, I need to navigate the file always pick up a few points seen earlier, which causes a lot of discomfort compared to printed documents.

  This is a suggestion, but I would like it to be considered.

  Thank you for your request. We have taken note of the same and must try to integrate it into one of our future releases.

  Thank you.