DataGuard - primary not applying not newspapers in standby mode

Similar Questions

• Tablespace Temp created primary not replicated to standby mode

  Hello
  
  I configured Oracle 9i data guard recently, while doing, that I was forced to restructure primary db since maxlog files was 5, so I used backup controlfile to trace and changed the maxlogfiles to 6 and then transported the remaining steps. While I was using the trace file and restructuring of the Db, I did not notice that I missed to add the temporary file and moving it in standby mode. Yest.Day once get a team request error, that I created a new tablespace temp and logs switch made, however this tablespace temp tempfile was not copied to the standby server. Does this cause anything serious or can I do now to copy it in standby? Only the manual copy with primary db shutdown or any other means?

  standby
  SQL > SELECT NAME FROM V$ TEMPFILE;

  no selected line

  Use the commands below

  SQL > alter tablespace add tempfile ' D:\ORACLE\ORADATA\CTSOC\TEMPNEW01. DBF' size 31457280;

  If you take controlfile trace (or) metadata, you can see command DDL that too.
  Thank you.

• Archivelogs not transforing in standby mode

  Hello
  
  In dataguard parameter are configured in
  
  primary database to transfer the archivelogs as log_archive_dest_2 ='service = to_orcl
  
  and standby_file_management = auto and also created the directory structure.
  
  side database pending: standby_archive_dest = ' / u01/app/oracle/arch/orcl.
  
  
  Earphone works and also works in the tnsnames.
  
  But archivelogs transform not Eve elementary school.
  
  can you please let me know why it is like that.
  
  Thank you very much

  Vinciane wrote:
  LOG_ARCHIVE_DEST_STATE_2 = enable and log_archive_dest_2 = 'service = to_orcl'

  as this set of parameters.

  Two points must be considered in when it comes to Archives of newspapers are not shipped to standby mode:

  1. it should be:
  LOG_ARCHIVE_DEST_2 = SERVICE = MARKTEST LGWR ASYNC
  VALID_FOR = (ONLINE_LOGFILES, PRIMARY_ROLE)

  2 are you able to conn sys/pwd@stby as sysdba, if yes, it means that there are no connectivity issues; If not, this is the reason that's why newspapers are not shipped to the backup site. It is due to number with password file or something with the name of the service. Just drop it and create a new/freshpassword with the same password for both primary and standby.

  3. check if your OS username part of the ORA_DBA group.

  Concerning
  Girish Sharma

• Computer will not remain in standby mode.

  I have a computer with Windows XP, about 5 years old who often will not remain in standby mode. After 30-45 seconds it starts again and the display shows again the office.

  Does anyone have a suggestion/recommendation what to do about it?

  Thanks, any suggestions would be appreciated.

  Hello JJLinker, welcome.

  The issue is likely caused by "Wake by " settings in your power options. This gives a shot:

  1. click on START
  2. right click "My computer" and select "Properties".
  "3. click on the tab"Hardware", then select Device Manager.
  4. expand the "Network adapters" category
  5. right click on each of the devices and select "Properties".
  6. on each, go to the tab "power management."
  7 turn off the checkbox "allow this device to wake...". ' and click on 'Ok '.
  8. close all windows and restart the computer

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• PowerEdge T410 error: POWER: not available in standby mode

  Good afternoon!

  Has anyone caught the error described below with a PowerEdge T410?

  POWER: not available in standby mode

  Power: Off

  During this operation you tried these steps on both power supplies separately? If yes then it seems that the motherboard may have a problem.

• Model # 860-180 st: computer will not go to standby mode

  I just got this computer HP, model # 860-180 st, not even a month, "sleep" mode was working fine when I got it, but now it will not enter sleep mode. I checked everything in Control Panel, power options, so I don't know what the problem is. People of the idea?

  Jay_101 wrote:
  

  Greetings,

  Also check out tips found on thissite. She aims to win 8.1 but will also help to win 10.

  First generate a report of power. This will tell you which prevents the day before.

  See you soon!

  Hello Jay_101,

  Thanks for the link, I found what was preventing the computer in standby mode. It was the srvnet thing.  This link has all the tips and trick to solve this problem.

  I owe you a lunch.

  I contacted the HP Support by phone, the call is routed to the India, where else? The guy wanted remote access to my computer, I said no way Jose. These types of support for HP in India are unnecessary. All he wanted was Remoting to my computer, since I refused he won't talk to me more.

• Satellite Pro L10 does not go on standby mode

  After a virus and reinstall all my programs and drivers etc, my computer won't now, go in standby mode.
  When you go to "turn off computer" option ensures their but is grayed out and you can not click on it.
  Power options in my Control Panel on them is not an option to set the day before to the top.

  Can anyone help?

  Hello

  In my view, a Toshiba Power Saver must be preinstalled and there you should be able to enable or disable the standby or hibernation mode.

  Check it!

• PC does not go on standby mode

  Hello

  I have a strange problem with my Pavilion (Vista 64 bit): it just won't go/stay in stand-by mode.

  Whenever I go through start panel into position mode it seems to go through the process of orders-by only're - wake up' the very next second pressing strongly it's fans and check the dvd player (no matter if there is a CD-ROM/dvd-rom in it or not).

  Same thing happens whenever I'm away from the PC long enough for him to enter standby mode automatically. He tries to stand by again after a certain period of time without ever stay in stand-by.

  I had the problem since I bought the PC a few months - but having already had to return to the first person that I bought right away I didn't go through the hazzle and take the second return - once again.

  Thank you very much in advance for your help!

  Sorry for the late reply.

  The question that you mentioned usually caused if the network adapter is set to wake the computer from sleep. If you are usign an always on Internet connection then there will be a constant activity in the network card and it wakes you up the PC as soon as you put in mode 'sleep'.

  Please, check the following and verify that the settings are correct.

  -Press the Windows logo and the R button to open the control box run.

  -Type devmgmt.msc, and then click OK.

  -It will open up the Device Manager.

  -Click on + sign next to network card and right click on the name of the adapter listed.

  -Select properties, then click the power management tab.

  -If the option "Allow this device to wake up the PC" is checked, uncheck the box that and click Ok.

  Try to put the PC to sleep/wake and check if it is in "standby mode".

  I would like to know if the procedure worked. Give Kudos if it works.

• X120e bad DIMM location. System does not return from standby mode

  Hello. I have a X120e running Windows 8.1 Pro x 64.

  I just put the unit to 4 GB of ram (2 x 2) of 2 GB (1 x 2). Whenever the upper DIMM Slot is used, the system will not leave standby mode and all power, including the battery must be removed from the system so that it works normally again.

  Of interest, all the ram tested with Memtest86 +.

  If it's important the system has the e350 CPU and a 320 GB HARD drive.

  Let me know if you have any input.

  Thank you!

  Update: I've updated the BIOS from 1.16 to 1.17. The system now between and leave pending normally as it should, with the two occupied ram slots.

  Of interest, none of the BIOS settings changed after the update.

• Computer XP is not going to standby mode automatically

  I went to control panel, click on view and then clicked on power but I still can't get my computer to go to sleep automatically. Can you please help.

  * original title - I have a praoblem with my office. I have windows xp and I can't get my computer to go on standby automatically *.

  Hi sher john,.
   
  Here are some links that you might find useful:
  Windows XP does not enter standby after the exact period that is configured in the Power Options profile
   
  The computer cannot enter sleep or hibernation mode if a Direct3D screensaver is running
   
  How to solve the problems of hibernation and standby in Windows XP

• MY Office Pavilion model A6647C will not go to standby mode

  MY Pavilion desktop model A6647C won't sleep mode.

  How can I fix?

  The Sleep Mode can not activate or go out intermittently for several
  reasons:

  1. If the computer has a tuner card, TV tuner may be active.
  2. A virus protection utility is running an analysis of activate.
  3. Third-party wireless keyboards and mouse may cause the problem.
  4. An application is preventing Sleep Mode to activate.
  5. Ensure that all video available driver and software updates have been downloaded and installed.
  6. Make sure all available operating system patches and updates have been downloaded and installed.

• Windows do not go to standby mode after being left idle

  Windows 7 Home Premium, Dell Inspiron 1545 laptop

  My laptop won't sleep after be left idle.

  I checked all power options, including allowing the laptop to sleep when sharing multimedia. I checked the Device Manager for hardware that can wake up my laptop. There are no programs that are listed etc..

  When sections of battery, in that the critical level, my laptop will put into hibernation.

  I am currently using power options that don't work by default energy savings.

  I'm pretty sure that my laptop used to go to sleep with Windows 7 installed, but have no idea what has been changed and don't like formatting etc.

  It makes me crazy... I'm not a novice in computer and googled, I tried many different options etc.!

  Thanks for any help.

  I managed to fix this now.

  My audio driver (IDT High Definition Audio CODEC) observed an open audio stream, preventing sleep. Downloaded and installed the latest driver well.

  I discovered this by using "powercfg-applications" command at the command prompt.

• C40 Cisco does not go on standby mode

  Hello

  I have a problem with a Cisco C40 where the codec simply is not going to go into sleep mode. I tried every possible thing to make it work, but without success. When I use Putty and you connect to it and sent the normal control: xcommand Eve turn on it goes to sleep. I also did a system reset, without success.

  When using the graphical interface and tell the system to go into mode after 1 minute, the system will remain forever.

  Anyone else having this problem, I have a second Cisco C40 who started doing this morning so I'm not sure what to do. I also noticed that the codec comes out of sleepmode the source presentation will change also to the main camera.

  Kind regards

  Cornelis Stoop

  The problem may be caused (in the screenshot eln_1.png) to have the Source of presentation to the source of the main camera.  This must be set on an other sources and not the main camera.

  Able to provide the whole xconfig one of the devices having the question rather than just two screenshots of the web interface, which do not show everything?

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Archiver not sent to standby mode

  Hello, I'm having a problem with an archiver missing pending
  

  Parallel Media Recovery started with 24 slaves
  Waiting for all non-current ORLs to be archived...
  All non-current ORLs have been archived.
  Fri May 25 11:44:01 2012
  Media Recovery Log /u01/app/oracle/product/11.2.0/db_3/dbs/arch1_4519_779554453.arc
  Error opening /u01/app/oracle/product/11.2.0/db_3/dbs/arch1_4519_779554453.arc
  Attempting refetch
  MRP0: Background Media Recovery terminated with error 308
  Errors in file /u01/app/oracle/diag/rdbms/stp_stby/EL***P1/trace/EL**P1_pr00_29287.trc:
  ORA-00308: cannot open archived log '/u01/app/oracle/product/11.2.0/db_3/dbs/arch1_4519_779554453.arc'
  ORA-27037: unable to obtain file status
  Linux-x86_64 Error: 2: No such file or directory
  Additional information: 3
  Recovery interrupted

  He is always on the main site. How can I send it again?

  Hello;

  From your main server, run the query shown in this link and look for a gap:

  http://www.Visi.com/~mseberg/monitor_data_guard_transport.html

  Also confirm that the archives exist on the primary, you may need to save it manually.

  Best regards

  mseberg

• Satellite 1800-314: when I close the lid it won't go in standby mode

  I hope someone can help.
  I recently had my Satellite 1800-314 (Windows XP) re-formatted and now when I close the lid he's going to sleep... the power light flashes orange, when I opened the lid still once, Windows stops and then restarts. I tried to install the Toshiba power settings, defining "when I close the lid, in standby mode", does not.

  Have uninstalled then Toshiba power settings and all the settings of ordinary power in the Panel of 'sleep', etc., but it REST did not return to standby mode.
  I'm tired now.
  Is there a simple solution that I'm missing?

  Grateful in advance for any help!

  Hello

  You know it's very important to install drivers in the correct order.
  The installation of common modules at the beginning is important because some drivers of Tosh need this application to work properly.
  If the energy saver has been installed on the operating system windows power settings will not work.
  Toshiba crash parameters the parameters of Microsoft.

  In addition, please check your BIOS preinstalled. Compare the version with the BIOS on the page. If your uses of the unit the old version, so try to update.
  But be careful. You must use the good BIOS and the right procedure upgrades.