DATE of entry into sql

Similar Questions

• Need help get data with the most recent date of entry into

  Hey guys;
  
  I need help with fine tuning a query to get the one with the most recent implementation.
  
  Here's my current query:
  
  /**********************************************
  Select sge.seal_group_id,
  SGE.equipment_id,
  SGE.effective_date
  of seal_group_equipment EMS.
  seal_group sg
  where equipment_id = 48801
  AND EMS. SEAL_GROUP_ID = SG. SEAL_GROUP_ID
  and sge.end_date is null
  Group of sge.equipment_id, sge.seal_group_id, sge.effective_date
  After having sge.effective_date = max (sge.effective_date)
  
  ******************************************************/
  
  Which produces the following results:
  SEAL_GROUP_ID - EQUIPMENT_ID - EFFECTIVE_DATE
  25-48801 - 01/01/1993-00: 00:00
  11730-48801 - 22/08/2003 08:42:11
  
  
  What I really need, is to show only the line with the most recent date of entry into
  I hope someone can help
  Thank you

  MAX will not work because the SEAL_GROUP_ID could depart. I would say analytical:

  select seal_group_id,
  equipment_id,
  effective_date
  from (
  select sge.seal_group_id,
  sge.equipment_id,
  sge.effective_date,
  RANK() over (partition by equipment_id order by effective_date desc) r
  from seal_group_equipment sge,
  seal_group sg
  where equipment_id = 48801
  AND SGE.SEAL_GROUP_ID = SG.SEAL_GROUP_ID
  and sge.end_date is null)
  where r = 1;
  

  Keep in mind if two records have the same effective_date, they would both appear.

  Note: query above has not been tested, since there is no script provided.

• Date of entry into procedure statement

  Hi all.
  
  
  a DVICE me please what is the error in this statement 'a' in this procedure. the procedure to obtain the name of the table and date from the user and execute it.
  I think that my error for the format of the date in a statement. So, please give me the correction if you can.
  
  
  
  CREATE OR REPLACE PROCEDURE sp (table_name in varchar2, date_begin to date DEFAULT null)
  is
  type bulk_collect is table of index varchar2 (1000) by PLS_INTEGER;
  v_bluk1 bulk_collect;
  v_bluk2 bulk_collect;
  a varchar2 (300);
  c varchar2 (30);
  
  Start
  c: = table_name;
  r: = ' select rowid, id of ' | c | ' where date_of_ins > = ' | to_date(date_begin,'''dd/mm/yyyy'''); 
  
  immediately run a bulk collect into v_bluk1, v_bluk2;
  b in v_bluk1.first... loop v_bluk1. Last
  dbms_output.put_line (v_bluk1 (b));
  end loop;
  
  end;
  /
  
  
  
  
  SQL > exec sp ('emp', to_date (' 1/2/2006 ',' dd/mm/yyyy'));
  START sp ('emp', to_date (' 1/2/2006 ',' dd/mm/yyyy')); END;
  
  *
  ERROR on line 1:
  ORA-00904: "FEB": invalid identifier
  ORA-06512: in the 'END. "SP", line 13
  ORA-06512: at line 1
  
  Published by: Isabelle Sep 8, 2012 11:23

  Change according to your need...

  bkd@Oracle>ed
  Wrote file afiedt.buf
  
    1  CREATE OR REPLACE PROCEDURE sp(table_name in varchar2,dt IN date)
    2  is
    3  type bulk_collect is table of varchar2(1000) index by PLS_INTEGER;
    4  v_bluk1 bulk_collect;
    5  v_bluk2 bulk_collect;
    6  a varchar2(1000);
    7  begin
    8  a:= 'select last_name from  '|| table_name ||' where hire_date <= :dt';
    9  dbms_output.put_line (a);
   10  execute immediate a bulk collect into v_bluk1  using dt;
   11  dbms_output.put_line (a);
   12  for b in 1..v_bluk1.count loop
   13  dbms_output.put_line (v_bluk1(b));
   14  end loop;
   15* end;
  bkd@Oracle>/
  
  Procedure created.
  
  bkd@Oracle>exec sp('employees',to_date('01/02/2012','dd/mm/yyyy'));
  select last_name from  employees where hire_date <= :dt
  select last_name from  employees where hire_date <= :dt
  OConnell
  Grant
  Whalen
  Hartstein
  Fay
  

  Concerning
  Biju

  Published by: biju2012 on Sep 9, 2012 12:47 AM

  Correction: Replace for b in v_bluk1.first... v_bluk1. Last loop b loop 1.v_bluk1.count

• How to convert the Dates of entry into ReminderInfo in observed activity!

  Hello

  We read the Date and time of the reminder of the user via the form. We want to link this entry date and time with ReminderInfo data type to set

  Reminders in activity Task Assign.

  Please find the ppt for more information.

  Please help us in this regard.

  Thank you

  Praveen

  Drag a SetValue component and add assignments (see the screenshot to the assignment)

  Repeat the same thing for hours and minutes

  Nith

• Date of entry into monthly intervals

  Hello

  How could I do a count by month but from a certain date.

  I want to count the number of decreases from. So count on Jan 14, then another month to Feb. 14, March 14 etc...

  Jan - 14	Feb - 14	Mar - 14	Apr - 14	-14 may	Jun - 14	Jul - 14	Aug - 14	Sep - 14
  50	120	30	etc.

  example:

  SELECT COUNT (*), - the MONTH of

  TABLE

  Group by MONTH

  Hello

  Chloe_19 wrote:

  Hello

  How could I do a count by month but from a certain date.

  I want to count the number of decreases from. So count on Jan 14, then another month to Feb. 14, March 14 etc...

  Jan - 14	Feb - 14	Mar - 14	Apr - 14	-14 may	Jun - 14	Jul - 14	Aug - 14	Sep - 14
  50	120	30	etc.

  example:

  SELECT COUNT (*), - the MONTH of

  TABLE

  Group by MONTH

  To map all the dates in a calendar month with a common value, use TRUNC (d, 'MONTH').

  However, grouping which will produce a separate line for each month, not a separate column as you asked.  For the different columns for different months, use SELECT... PIVOT, like this:

  WITH relevant_data AS

  (

  SELECT TRUNC (MONTHS_BETWEEN (hiredate, DATE ' 1981-01-01')) + 1 AS month_num

  FROM scott.emp

  )

  SELECT *.

  OF relevant_data

  PIVOT (COUNT (*)

  FOR month_num IN (1 AS jan_1981

  2 UNDER feb_1981

  --  ...

  12 AS dec_1981

  )

  )

  ;

  Fill in the other months should be easy.

  Output:

  JAN_1981 FEB_1981 DEC_1981

  ---------- ---------- ----------

  0          2          2

  For more info on swivel (including other ways besides SELECT... See the FAQ of the PIVOT forum): Re: 4. How can I convert rows to columns?

• Cannot turn off the field from the date of entry into application workflow

  Hello
  
  We implement the workflow application in OIM11g.
  
  We use application templates to achieve this.
  
  We want to disable or remove the field from the effective date in the rationale page that appears when we raise a request. Did one of you has implemented or came across this scenario. Please update if you have an idea about that.
  
  Thank you

  The property system will remove the entire page of the process, including the justification box.

  -Kevin

• Date of entry into french? Possible?

  Hello

  I want to create a label that indicates the date:

  {" < mx:Label text =" {}df.format (new Date ())}" / > "

  " < mx:DateFormatter formatString ="EEEE DD MMMM YYYY - HH"id =""" df / >

  Then it works fine. But how to put french? Possible? : s

  Thank you very much!

  Chandler

  Took too long to respond...

  As I said in the previous message, use copylocale.exe in the folder "Applications/Adobe Flex Builder 3/sdks/3.2.0/bin/" command line to create the directories en_US missing.

• Date of entry into title of report output

  Hi all, I know that in BEEP you can insert the current date in the title of the report when a report is sent via FTP. Example my_file_%y%m%d.txt. In our database environment is always a day behind... so we need %d is essentially %d - 1. Does anyone have a creative solution to get around this?
  
  Thank you!

  If you use the break-up, you can decide on the name of the file.
  You use the burst, in that query, you can create your template file name.

• Date of entry into french

  I have a date I want to display in a text control.
  
  I have no problem to display it in the use of English
  < mx:DateFormatter id = 'dateFormatter' formatString = "EEEE D MMMM YYYY" / >
  and
  < mx:Text text = "{dateFormatter.format (mydate)}" / > "
  
  I got: Wednesday, July 11, 2007
  
  But how can I do the same in french: Wednesday, July 11, 2007
  
  Thanks for help
  
  Etienne

  There is a DateBase class that contains the messages localized to date in Flex, you can set the values of the DateBase trainer, like this: (this example is in Spanish)

  Import mx.formatters.DateBase;

  public function setDateBase (): void {}
  DateBase.monthNamesLong = ['Dom', "Lun", "Mar", "First", "Game", "Vier", "Sab"];
  DateBase.monthNamesShort = ["Ene", "Feb", "Mar", "Apr", "may", "Jun", "Jul", "There is", "Sep", "Oct", "Nov", "Dic"];
  }

  By doing this, you can set whatever string you want and objects Date, appear in your case, you just need define the days, the months in french and made.

  More information about the values that you can set:
  http://livedocs.Adobe.com/Flex/2/langref/MX/formatters/DateBase.html

• Date of entry into text field

  Hello
  
  I'm the problem by entering the date in submitted text (this is the data type is date)
  
  After that date to conclude this textfield cursor does not move to the next textfield.
  
  If I make the data type of this field as a number and then the cursor moves to the next field
  
  What is the problem
  
  Thank you
  
  ~ AC

  Enter the date according to the format of the field mask.
  for example. If the format mask 'DD-MON-RR' is then enter data in 4 December 08 '

• SQL error: ORA-01840: value not long enough for the format of the date of entry

  It is a delete SQL in a driver of demand, which gives no error, but does remove all the lines either. I have converted the removal 'from' to ' Select * ' and may see the following error:
  
  Select * FROM PS_GPDE_DV_TRIG40 WHERE EXISTS (SELECT FROM 'X'
  PS_GPDE_DV_ELIG_MO ELG WHERE ELG. EMPLID = PS_GPDE_DV_TRIG40. EMPLID AND
  ELG. EMPL_RCD = PS_GPDE_DV_TRIG40. EMPL_RCD AND TO_DATE (TO_CHAR (ELG. PRD_END_DT
  "YYYY"). TO_CHAR (ELG. PRD_END_DT, "MM"). '01', "YYYY-MM-DD") =.
  PS_GPDE_DV_TRIG40. GPDE_DV_EVT_EFFDT AND ELG. CAL_RUN_ID = "CAL_0812")
  Error report:
  SQL error: ORA-01840: value not long enough for the format of the date of entry
  
  
  The interesting thing is that if I attach a condition of emplid, then the SQL above does not give an error and return lines:
  
  Select * FROM PS_GPDE_DV_TRIG40 WHERE EXISTS (SELECT FROM 'X'
  PS_GPDE_DV_ELIG_MO ELG WHERE ELG. EMPLID = PS_GPDE_DV_TRIG40. EMPLID AND
  ELG. EMPL_RCD = PS_GPDE_DV_TRIG40. EMPL_RCD AND TO_DATE (TO_CHAR (ELG. PRD_END_DT
  "YYYY"). TO_CHAR (ELG. PRD_END_DT, "MM"). '01', "YYYY-MM-DD") =.
  PS_GPDE_DV_TRIG40. GPDE_DV_EVT_EFFDT AND ELG. CAL_RUN_ID = "FM_CG_0812")
  and emplid = "1234"
  
  now, if the number of lines is identified (by giving more number of emplids), it begins to give the error when the number of rows returned is greater than about 30. It is completely independent of what employee is used, so there is no question of data dependence.
  
  Function optimizer cost is off and a subquery nest is off on the init.ora file
  
  subquery UNNEST= false
  
  optimizercost_based_transformation = off
  
  
  I don't know if it has something to do with this problem.
  
  Explanations would be welcome!
  
  Thank you
  Vikas

  I think it is question of data combined with a not very sensible date format mask (it could fail when the null data, because of your concatenation with '01' and work when not null data).
  Have you tried with a simple TRUNC?

  Your code:

  ...TO_DATE(TO_CHAR(ELG.PRD_END_DT, 'YYYY') || TO_CHAR(ELG.PRD_END_DT , 'MM') || '01' , 'YYYY-MM-DD') =PS_GPDE_DV_TRIG40.GPDE_DV_EVT_EFFDT...
  

  After change:

  ...TRUNC(ELG.PRD_END_DT , 'MM') =PS_GPDE_DV_TRIG40.GPDE_DV_EVT_EFFDT...
  

  Nicolas.

• Trying to get ending entry into force for the groups of lines

  Hello world
  
  I searched the forums, but I can't find a post that is a problem quite like that.
  
  I have some data that looks like this:
  

          ID_NUM     EFFECTIVE ALLOC_PERCENT   ACCT
  ---------- --------- -------------   ----
         101 01-JUL-11            21   A1
         101 01-JUL-11            72   A2
         101 01-JUL-11             7   A3
  
         101 01-JUL-12            20   B1
         101 01-JUL-12            80   B2
  
         101 01-JAN-13            20   A1
         101 01-JAN-13            20   A2
         101 01-JAN-13            50   A3
         101 01-JAN-13            10   B1
  
         101 01-JUN-13            50   A1
         101 01-JUN-13            50   A2

  (note: I inserted manually empty lines for clarity)
  
  Here's the logic: the lines represent an assignment of percentage on the account for the identification number specified for this entry into force. A new date to cancel the previous, and if any line in the conceptual group is replaced, so they are all.
  
  I'll try to find the date when the effective period of each group ended and which includes in the game so that I can calculate then the number of days in a given line has been effective; something like that;
  

    ID_NUM     EFFECTIVE END_DATE   ALLOC_PERCENT ACCT
  ---------- --------- ---------- ------------- ----
         101 01-JUL-11 01-JUL-12             21 A1
         101 01-JUL-11 01-JUL-12             72 A2
         101 01-JUL-11 01-JUL-12              7 A3
  
         101 01-JUL-12 01-JAN-13             20 B1
         101 01-JUL-12 01-JAN-13             80 B2
  
         101 01-JAN-13 01-JUN-13             20 A1
         101 01-JAN-13 01-JUN-13             20 A2
         101 01-JAN-13 01-JUN-13             50 A3
         101 01-JAN-13 01-JUN-13             10 B1
  
         101 01-JUN-13 <null>                50 A1
         101 01-JUN-13 <null>                50 A2

  The end_date of the group is the EFFECTIVE_DATE of the next group (ordered by ID_NUM, EFFECTIVE_DATE).
  
  End_date of two rows is zero because there is no group of lines with an effective date the later - in my process, I'll NVL which sysdate so that my calculations of days will be valid.
  
  I tried some analytical queries with LEAD, but I couldn't figure out how to get the next date of the efficient group. I could get the entry into force of the next row, but not the next group. I couldn't specify how many lead lines to look forward, because there is not a number of rows in each group.
  
  How to fill the end_date column?
  
  Here's the code to create the above.
  

  create table t
  (id_num number,
   effective_date date,
   alloc_percent number,
   acct_code varchar2(4)
   );
  
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jul-2011',21.0,'A1');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jul-2011',72.0,'A2'); 
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jul-2011',7.0,'A3');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jul-2012',20.0,'B1');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jul-2012',80.0,'B2');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jan-2013',20.0,'A1');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jan-2013',20.0,'A2');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jan-2013',50.0,'A3');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jan-2013',10.0,'B1');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jun-2013',50.0,'A1');
  insert into t (id_num,Effective_date,alloc_percent,acct_code) values(101,'01-jun-2013',50.0,'A2');
  
  commit;
  
  select * from t;

  Oracle version information:
  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production
  PL/SQL Release 11.2.0.3.0 - Production
  "CORE 11.2.0.3.0 Production."
  AMT for Solaris: 11.2.0.3.0 - Production Version
  NLSRTL Version 11.2.0.3.0 - Production
  
  
  Thank you very much

  Hello

  Here is one more way to do using lead work.

  WITH ds as (id_num, effective_Date, lead (effective_date) select on end_date (id_num order, effective_Date))

  t

  Id_num group, effective_date)

  Select t.*, ds.end_date

  DS, t

  where t.effective_Date = ds.effective_Date;

• Inserting data in the form SQL database

  I'm sure this question has been asked before, but during my research, I couldn't find an answer.
  
  I have a field of file download a form where users can download a separator: excel file, which is inserted into the SQL tab. This method works correctly. In the same form, I have a couple of text entry boxes in which I want the data that the user entered to be inserted in every row in the database SQL - in conjunction with the excel data entries. I hope I explained this correctly. Let me give a Visual. Here are the fields of the form:
  
  FILE LOCATION: [] Browse...
  [TAIL:]
  [INSTALLATION:]
  [DOWNLOAD DATE:]
  [ENTRY DATE:]
  
  The user has access to their file and inserts the rest of form fields. In the background, Coldfusion downloads the file and it then inserts into the SQL database. I need to take the rest of the data entered by the user (TAIL, INSTALLATION, DOWNLOAD DATE, DATE of ENTRY) and add/update on the same lines as the data of the file upload (excel sheet).
  
  I am sure that this would imply a sort of < cfloop >, but not quite sure how to code correctly. Please notify.

  Found the solution. I have a will insert my excel data in a line at a time. I went ahead and added the 4 forms of the insert fields and it looped through each line while adding the values in the form. Thanks for your help anyway Westside, much appreciated.

• I have a laptop on vista home-use. When you look in Control Panel - be uninstall, should there be several entries for SQL server, or one or none?

  I have a laptop on vista home-use.  When you look in the control panel - and then to uninstall, should there be several entries for SQL server, or one or none?  Each entry seems to have a different digital denotation, but apparently I should have only one entry maximum.

  The reason that I ask is that I have had problems in the software.  I want to uninstall everything that is not supposed to be there.

  Some lines of programs listed show information... some lines are completed.

  When you click on a line that is complete, I am allowed the usuall to uninstall, options etc.

  When you click on a line that is not complete, I'm not allowed the option uninstall.

  The Compact Edition and the full SQL Server can be installed at the same time without any problems. I saw SQL Server2005 apparently installed by a manufacturer, perhaps to support some software they have grouped in. He could have an Acer.

  I do not know what cause the problem with the uninstall option is not available. Information to fill in these fields are in the registry.

  HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall if you want to watch.

  It could be the result of a broken uninstall or a bad registry cleaner. I'm not aware of anything that would fix this. You can try this http://support.microsoft.com/mats/Program_Install_and_Uninstall

  but you may have to reinstall programs later.

  You need two redistributable Visual C++ if you have programs that need it, which is likely. They had several updates that fits into the list programs. I have two for 2005 and six for 2008.

• Date fromats loading using SQL * Loader

  Hello

  I have the data to load into an Oracle DB using sqlldr below

  333. 789. 6 ||| 01-08-2013 | 2014-08-01 |

  334. 789. 6 ||| 01-08-2013 | 2014-08-01 |

  335. 789. 6 ||| 01-08-2013 | 2014-08-01 |

  It fails while the failed to load on date formats. How can I fix everything by using load data.

  Thank you

  Sylvie

  Works for me. You must validate the CTL file.

  Here is an example:

  Control line: -.

  DOWNLOAD THE DATA

  INFILE *.

  IN THE TABLE test_table

  REPLACE

  FIELDS TERMINATED BY ', '.

  (

  Col DATE 'yyyy-mm-dd ".

  )

  BEGINDATA

  2013-08-01

  2014-09-01

  2015-10-01

  2016-11-01

  2017-12-01

  -Create table

  SQL > create table test_table (date of the pass);

  Table created.

  -SQL * Loader

  C:\Users\43729434>sqlldr user/password@db_alias name control=C:\fakepath\test_ctl.ctl

  SQL * Loader: release 11.2.0.1.0 - Production Tue Oct 24 10:26:40 2013

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  Commit the point reached - the number of logical records 4
  Commit the point reached - the number of logical records 5

  -Check the data in the database

  SQL > alter session set nls_date_format = 'DD-Mon-YYYY ';

  Modified session.

  SQL > select col from test_table;

  COL
  -----------
  August 1, 2013
  01-sep-2014
  October 1, 2015
  November 1, 2016
  December 1, 2017

  SQL >