DBMS driver exception was: locale not recognized

Similar Questions

• Driver for my printer not recognized by windows 8. Device

  I tried to install an old printer in windows8. The pilot was not available and none was available at HP. I get the message not recognized usb device and I can't get rid of the message. Chat help or tech support Microsoft have not been able to help. all of the suggestions.

  If this printer manufacturer provides no driver win7/8 and windows update via Add printer has no drivers, its does not work

  And any workaround method will be more expensive than buying a new printer compatible

• My CD/DVD drive has disappeared / is not recognized

  My CD/DVD drive is not recognized. I don't see what may have caused it, the only thing that I changed it recently on my computer is a windows update.

  In the Device Manager under CD/DVD-ROM drives, there is a subcategory of TSST corp CDDVDW SH - S223F ATA Device (I presume it's the name of my drive) and when I go on properties in that under device status it says

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click "Find solutions to send data about this device to Microsoft and to see if there is a solution available."

  After clicking on "check for solutions" nothing seems to happen, can anyone help?

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Drive CD/DVD is not recognized.

  Original title: problems with ' Drive

  Yesterday, Fix it Center has replaced the driver for my CD/DVD. It has worked perfectly for a few seconds and then 'frozen '.
  After several attempts to restart it, I ended up doing a system restore, which (as you know) 'lost' the driver for it had "lead to new!
  This morning I tried again to use Fix it Center, but get now an error code: 0 x 80092003.
  Any help to this sorting will be appreciated.
  Kind regards.

  Hello

  Looks like the drive may be faulty, did you add that any CD or DVD of recent programs-
  especially those that load at startup?

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Driver webcam, peripheral USB not recognized?

  I have the MSI WIND U135. I use Windows XP and everytime I turn on my webcam, it comes up with the bubble yellow saying: USB device not recognized. In Device Manager, I usually have a scanner and camera tab, but I have now.  I don't know what to do. Thanks in advance for the help.

  Hello Megan, you can resolve this problem by updating the drivers...

  Download each of these files and right-click on it and click on extract all. Then go to the folder and run the Setup file and follow the instructions.
  Each of them, install in the order that they are listed below.

  1. Intel 5 Series Chipset cs_intel5series_9.1.1.1027_al00.zip
  2. Simple Face easyface_nb_all_11036.zip
  3. Simple camera app: webcamtool_vr630_xp32_nb.zip

  After installation, restart your PC, and it should work.

  If it does not, then there is a hardware failure in an integrated device. If it is under warranty, you can get it checked by the manufacturer.

• Vista Ultimate 64 - Driver scanner Canon 4400f not recognized/corrupted

  I have a USB of Canon 4400F scanner that works fine with other computers (Vista laptop and a desktop Windows XP), but for some reason any drivers/registry for this device is messed up on my PC, and it will not (re) install correctly.
  It worked perfectly for a long time (over a year), but do not use it for a while, after he is now stuck in the same unusable state, no matter what I do. I suppose that some day that something has caused this.

  All started with Device Manager telling me that the scanner was disabled when I had a glance to see why the scanner did not work. So, I allowed it. Status changed and then "no drivers are installed for this device. Yet, in the tab drivers, drivers are listed (good version) and appear as it should (the driver dll files are still visible and correct).

  So here's what I've tried:

  (1) uninstall the device and drivers. Reset. Reinstall the drivers, then plug in the device. Status: disabled. Activation of gives the original problem no 'drivers '.

  (2) uninstall again, this time including the devices 'hidden' when he was in other USB ports. Searched the registry for all traces of the appliance, by product ID, code provider GUID, name of the manufacturer etc.. Deleted every file temp (windows General and specific user) and also the windows update "DataStore" and "Downloads" folder just to be safe.
  Now, this method worked in the past for a U3 USB key that there was an identical error. This time? Restart, install the drivers, install device - FAIL. Even disabled error followed by 'pilots No. "

  Drastic 3) measures - (2), but also uninstalled and reinstalled the USB drivers themselves for controllers and hubs. Rebooted and waited while each unique device USB driver has been installed from scratch (mouse, keyboard, etc.). Install scanner drivers and plugged into the scanner. Same end result - all USB works except the scanner.

  I tried the above with both versions of the drivers from the Canon Website and the original driver CD.

  Is there another location on the C: drive or in the registry that I might be missing? Again, this scanner works fine when I install it on other PCs that have never seen before, so I'm convinced it's my registry or files corrupted, hidden somewhere in C:\Windows\. All my other USB devices work perfectly.

  Without having to reinstall Windows, is there a way to reset all USB and Windows thinks that he has never seen a single USB device before? As I said, the scanner works perfectly when I plug it into another PC - no need to install the drivers as Windows Update Gets the last and it works!

  System information:
  Windows Vista Ultimate 64 bit
  4 GB OF RAM
  AMD Phenom 9950 CPU
  Lots of disk space

  Karena,

  Thanks for your suggestion - but I managed to fix another way before I saw your post, so I have not been able to test your method.
  I uninstalled SP2 (with the intention of doing a repair using my Vista SP1 DVD). However, after removing SP2, the scanner worked! Then I reinstalled SP2 and it still works. A little boring because we won't know what was arrested exactly-, but I guess that this method could have changed the location of the registry that you mentioned?

  I bookmarked this thread for future use so, thank you again for answering.

  Dave

• 160 GB external hard drive of Gigastore is not recognized correctly

  Hi, hope someone can help me!

  I bought a 160 GB external drive Gigastore hard today, but the plug inside, the computer did not recognize it. In fact, nothing happened. I tried all the usual as control to see if it was in my computer and then right click my computer, manage, etc computer management, but again, she did not show. I tested it on another pc and still does not work. I'll put up the wires correctly, so this isn't the issue.

  When I turn on the power, the hard drive light constantly flashes blue. I would have thought that will be that the hard drive has been slowed down, that he would stay on continuously without blinking. Could someone let me know if this blinking determines that the disk does not just and it is indeed tired?

  Phil

  Hello

  It seems that it s not a laptop fault because the other laptop or PC can not recognize the external HARD drive.
  Have you checked if some additional drivers or tools were shipped with this external HARD drive device?
  If please connect the HARD drive and use the Add Hardware option

• new drive HARD Seagate Barracuda not recognized in the BIOS

  Hello

  The Inspiron 530 desktop computer BIOS does not recognize my new HARD drive. It's a Seagate Barracuda 500 GB (ST3500413AS). I try to reinstall Vista, but installation can't find a drive with 3.9 GB. Wrong type of drive in the BIOS found, I think that.

  Tried several things, but no results: check the BIOS, but with automatic selection drive only to find a 4 GB (wrong type), updated the BIOS drive (now 1.0.18), tried several drivers with startup etc.

  Think I need a good driver, but on the site Web of Seagate, they say that there is no firmware for this drive.

  can someone help me?

  THX, David

  Thanks for all the support.

  It wasn't a problem with the SATA 3 or something like that, but the HARD drive was missing. There is no other choice. Come back with my HARD drive (and information) to the store and finally got a new. I hope that the other works :)

  THX and greetings

• USB Flash Drive Digital Signature is not recognized

  During the summer, I discovered that there is a huge trojan virus on my Vaio laptop.  I had to buy phone support and Sony helped me catch the virus from my computer.  However, now that I'm in College that I discovered that my laptop is unable to do the only thing I need to do - recognize my flash drive.

  When I plug ANY flash drive into the USB port of no matter WHAT, he did not recognize.  I get this message: "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  When I try to update the driver software it says that it is up-to-date.  I tried the thing support page of this says Sony (https://us.en.kb.sony.com/app/answers/detail/a_id/31399/p/48903%2C49902%2C71535%2C71585/c/65%2C66/kw...) where you configure the Local Disk Manager to start automatically and I do not have a local disk on my computer management.

  Is there a way to get back or get my USB key to work without the Disk Manager?  I really need this to get fixed!

  Here is the info on my laptop if it helps:

  OS: Windows 7-64 bit

  Model: VPCEH3MFX

  I haven't downloaded or modified software since they fixed my hard drive since the virus, I don't know if maybe the person who fixed it has removed this feature accidentally or something.

  Thank you so much in advance!

  Hi kendall__bryant,

  Please try to reinstall the usb drivers using these measures or these steps to solve the problem.

  Nick-

• Portege R500 driver CD turns but not recognized

  Hello

  I have a Portege R500 in 8 months and 3 months ago, CD drive disappeared from the Device Manager and despite fiddling with the registry file (don't remove the top filter, there was no lower filter) is still u/s.

  I think the problem is a driver like when it starts it constantly tries to turn the cd before you go start. I use a dynadock to connect to my lan work.

  Any help gratefully received.

  Have you tried another OS (for example, a live recording of ubuntu)? We know at least that it is a hardware or software problem...

• DVD-R drive SD-R6012 is not recognized on 6000 SP

  Hello

  I tried to install this drive in my notebook 6000 SP, but the system will recognize and when to start the laptop I get always an error 'IDE #1. Can someone help me?

  Hello

  As Joey says he s seems that the disc is not compatible due to the assignment of pins.
  You should always check the parts if they are compatible before buying.
  I think that this road is to master. In this case, BIOS have problem to recognize this part correctly because the HARD drive is also set to master.
  In this case, you need a new. It of not possible o solve this problem another way :(

  Good bye

• Drive HARD secondary is not recognized

  I installed a new secondary 250 gb HDD in my counter top, but the computer does not recognize it. Help, please?

  Right-click on my computer, go in manage, go to disk management and find the 250 GB hard drive.  There's likely to be a black color.  Right-click on the drive and select initialize.  Then right click on the black section and select format.  Follow the prompt on the screen.

• Floppy drive to ASR disk not recognized at the end of the backup on external drive

  Before you back up to an external hard drive, I'm warned I need a disc to record recovery system information.  Once the backup is complete, I said that he cannot make the ASR diskette because there is no disk drive.  But there is a car and I loaded it with a new DVD.  It shows the disc and the MBs available on the DVD by clicking on 'computer '.  How can I get the backup program from Vista to recognize that the floppy drive is there and ready to accept the ASR information?

  Hi RitaGowen,

  (a) edition of windows vista you run on the computer?

  (b) how exactly you are trying to back up files? You try to create an automated system recovery (of the ASR system) disk?

  Please, give the full error you receive to better understand the issue.

  You might want to know

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files

  Back up your files - frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• drive hard Seagate usm is not recognized by the computer.

  Windows 8 does not recognize my portable hard drive Seagate USM when I insert into the computer Bay USM.  The computer is a new Lenovo K450 Windows 8.

  Thanks Ronnie,.

  I contacted Lenovo on the K450 and they said that their computer would only recognize drives of 500 GB USM and mine are 1 TB.  I asked if he would support the discs from 1 to 2 to in the future and they said that it is not in their plans.  Meanwhile, my Seagate drives will connect via cable USB3 Lenove USB3 ports.

  Ken

  I have a K450 and thought the slot of USM was in not recognizing my Seagate Backup more 1 TB drive as well.  Then I found another similar post elsewhere and the solution is to enter the upper part of the computer and push harder!  It feels as if it was there when it really is not completely.  My 1 TB works fine now.  No idea why someone said there is a limit of 500GB.

• Drive external HARD PX1265E - 1 16 not recognized by XP

  I recently bought an external HARD PX1265E - 1 16 drive and it is not recognized by my XP PC - please can anyone help?

  Thank you very much.

  Kind regards
  Martin

  Hi Martin

  What to say? Try to contact it PC friends. None of us do not know what PC you have.