Vista Ultimate 64 - Driver scanner Canon 4400f not recognized/corrupted

I have a USB of Canon 4400F scanner that works fine with other computers (Vista laptop and a desktop Windows XP), but for some reason any drivers/registry for this device is messed up on my PC, and it will not (re) install correctly.
It worked perfectly for a long time (over a year), but do not use it for a while, after he is now stuck in the same unusable state, no matter what I do. I suppose that some day that something has caused this.

All started with Device Manager telling me that the scanner was disabled when I had a glance to see why the scanner did not work. So, I allowed it. Status changed and then "no drivers are installed for this device. Yet, in the tab drivers, drivers are listed (good version) and appear as it should (the driver dll files are still visible and correct).

So here's what I've tried:

(1) uninstall the device and drivers. Reset. Reinstall the drivers, then plug in the device. Status: disabled. Activation of gives the original problem no 'drivers '.

(2) uninstall again, this time including the devices 'hidden' when he was in other USB ports. Searched the registry for all traces of the appliance, by product ID, code provider GUID, name of the manufacturer etc.. Deleted every file temp (windows General and specific user) and also the windows update "DataStore" and "Downloads" folder just to be safe.
Now, this method worked in the past for a U3 USB key that there was an identical error. This time? Restart, install the drivers, install device - FAIL. Even disabled error followed by 'pilots No. "

Drastic 3) measures - (2), but also uninstalled and reinstalled the USB drivers themselves for controllers and hubs. Rebooted and waited while each unique device USB driver has been installed from scratch (mouse, keyboard, etc.). Install scanner drivers and plugged into the scanner. Same end result - all USB works except the scanner.

I tried the above with both versions of the drivers from the Canon Website and the original driver CD.

Is there another location on the C: drive or in the registry that I might be missing? Again, this scanner works fine when I install it on other PCs that have never seen before, so I'm convinced it's my registry or files corrupted, hidden somewhere in C:\Windows\. All my other USB devices work perfectly.

Without having to reinstall Windows, is there a way to reset all USB and Windows thinks that he has never seen a single USB device before? As I said, the scanner works perfectly when I plug it into another PC - no need to install the drivers as Windows Update Gets the last and it works!

System information:
Windows Vista Ultimate 64 bit
4 GB OF RAM
AMD Phenom 9950 CPU
Lots of disk space

Karena,

Thanks for your suggestion - but I managed to fix another way before I saw your post, so I have not been able to test your method.
I uninstalled SP2 (with the intention of doing a repair using my Vista SP1 DVD). However, after removing SP2, the scanner worked! Then I reinstalled SP2 and it still works. A little boring because we won't know what was arrested exactly-, but I guess that this method could have changed the location of the registry that you mentioned?

I bookmarked this thread for future use so, thank you again for answering.

Dave

Tags: Windows

Similar Questions

  • Pandigital PANSCN02 scanner that is not recognized by the computer

    I have a Pandigital PANSCN02 scanner that is not recognized by the computer.  Help.
    * original title - programs compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs *.

    Hello

    You can see the Microsoft Windows Compatibility Center, which says that the device has no information about the compatibility in windows 7.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&s=Pandigital%20scanner%20PANSCN02%20&type=hardware

    I suggest trying to launch the device in Windows Compatibility Mode and check if it works. See the link below:

    Make older programs in this version of Windows

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Hope this helps,

  • I'm trying to upgrade from windows vista to windows 7 - my western digital not recognized hard driver

    I am trying to upgrade to windows Vista Home Basic to windows 7 ultimate - my western digital not recognized hard driver. When upgrading the hard drive is not in the list of places to install. In addition, the driver is not found.

    Windows Update has nothing to with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • After Vista Ultimate Clean install battery Manager will not work Rundll32.exe error at startup

    I did a clean install of Windows XP SP3 Vista Ultimate SP 1. It was a total reload once installation is complete I used the insall system update all the drivers. Now Manager of battery will not work right, when I boot it hangs with an error rundll32.exe. I tried to uninstall and reinstall and allowed me at least open the program a bit, but there is no power management in the Manager. He says that I can create a new, but he does not appear once it is made. I can't counter is displayed in the taskbar and at this point I'm kind of at a loss.

    Any help would be great

    Thank you

    I have actully solved my problem. What I had to do was reboot the machine and after Vista installation was done I did the installation of battery first Manager and just downloaded from the section the T61 drivers (without using the update system) then once the battery Manager installation manual was full (it was then works well) I ran the system update to install the rest of the drivers and utilities Lenovo. If apperentally battery meter do not be installed via updater. My sugestion would be so to reload the machine once more and battery Manager install before running system update this is what worked for me.

  • My CD/DVD drive has disappeared / is not recognized

    My CD/DVD drive is not recognized. I don't see what may have caused it, the only thing that I changed it recently on my computer is a windows update.

    In the Device Manager under CD/DVD-ROM drives, there is a subcategory of TSST corp CDDVDW SH - S223F ATA Device (I presume it's the name of my drive) and when I go on properties in that under device status it says

    "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

    Click "Find solutions to send data about this device to Microsoft and to see if there is a solution available."

    After clicking on "check for solutions" nothing seems to happen, can anyone help?

    Hello

    19 code means there is a driver conflict such as two devices attempt to use the same resources.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack.

    Normally the above will solve this problem otherwise working your way down through them, even if you did
    them before.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    Hope these helps.
    Rob - bicycle - Mark Twain said it is good.

  • Drive CD/DVD is not recognized.

    Original title: problems with ' Drive

    Yesterday, Fix it Center has replaced the driver for my CD/DVD. It has worked perfectly for a few seconds and then 'frozen '.
    After several attempts to restart it, I ended up doing a system restore, which (as you know) 'lost' the driver for it had "lead to new!
    This morning I tried again to use Fix it Center, but get now an error code: 0 x 80092003.
    Any help to this sorting will be appreciated.
    Kind regards.

    Hello

    Looks like the drive may be faulty, did you add that any CD or DVD of recent programs-
    especially those that load at startup?

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Driver webcam, peripheral USB not recognized?

    I have the MSI WIND U135. I use Windows XP and everytime I turn on my webcam, it comes up with the bubble yellow saying: USB device not recognized. In Device Manager, I usually have a scanner and camera tab, but I have now.  I don't know what to do. Thanks in advance for the help.

    Hello Megan, you can resolve this problem by updating the drivers...

    Download each of these files and right-click on it and click on extract all. Then go to the folder and run the Setup file and follow the instructions.
    Each of them, install in the order that they are listed below.

    After installation, restart your PC, and it should work.
    If it does not, then there is a hardware failure in an integrated device. If it is under warranty, you can get it checked by the manufacturer.

  • Driver for my printer not recognized by windows 8. Device

    I tried to install an old printer in windows8. The pilot was not available and none was available at HP. I get the message not recognized usb device and I can't get rid of the message. Chat help or tech support Microsoft have not been able to help. all of the suggestions.

    If this printer manufacturer provides no driver win7/8 and windows update via Add printer has no drivers, its does not work

    And any workaround method will be more expensive than buying a new printer compatible

  • DBMS driver exception was: locale not recognized

    I am deploying example demo on weblogic Server intgrated hr using hr on the oracle database schema.

    the HR_EJB_JPA example compile with an error but not deployed and I get this error: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: unrecognized locale [13: 47:27] deployment cancelled. [13: 47:27] - incomplete deployment. [13: 47:27] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer) # can't run application HR_EJB_JPA due to the deployment on IntegratedWebLogicServer error. [HR_EJB_JPA application stopped and cancelled Server Instance IntegratedWebLogicServer]

    What is your locale.

    Can change you to English of the United States, if they are not.

    To change the country or region setting

    1. Open region and language by clicking on the Start button, click on the Control Panel, clicking clock, language and region, and then by clicking on the region and language.
    2. Click the location tab, select your location from the list, and then click OK.

    Refer

    My Java Dev Blog: Weblogic datasource error: locale not recognized after upgrade the Oracle 9 pilot - & gt; 10

    Thank you

  • Canon MP830 not recognized as a scanner to Yosemite

    Hi all

    I managed to get my Canon MP830 printer to print in all applications (Word / Photoshop) using the Gutenprint Canon servers. But I can't get the part scanner of the printer at work? Am I missing something? Or I have to delete some of the old Canon stuff? It's driving me crazy! Any notice received with gratitude. I don't mind where I scan to - any application - as long as I can then import this file into Photoshop (10 items)

    Any help gratefully received!

    Contact Canon technical support

    That is the software that you use to analyze?

    http://support.Apple.com/kb/PH18614 OS X Yosemite: reset the printing system

    http://support.Apple.com/kb/HT3669 printer and scanner software available for download

    A scanner driver, you may want to consider: VueScan Scanner Software

  • I tried to install 17 and with EACB updates of them, I get the error 646... follower of the tried help the regcure, and I am running vista ultimate 64-bit wich regcure support not... What can I do?

    need help with the code 646 error and unltimat of vista running 64-bit... Let me know what you need to know to help.  Thank you...

    Hello

    Try this 1st to see if it helps, and it should:

    Description of the Patch registration cleanup tool
    http://support.Microsoft.com/kb/976220/

    ------------------------------------------------------

    If necessary :

    Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
    or the update itself - double click a view more information (or click top then discovers on the right)

    Those who will take you to a page where you can download the update.

    Or go here and the KBxxxxxx number to download it.

    Download Center - mount the KBxxxxxx.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN

    Then you can right click on the update in the updates Windows and HIDE.

    If you get an error Installer install this version:

    Windows install 4.5 Redistributable
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    ----------------------------------------------------

    Then run this:

    How to reset the Windows Update components? -a Mr Fixit
    http://support.Microsoft.com/kb/971058

    Description of the system for Windows Vista, Windows Server 2008, update tool and
    for Windows 7
    http://support.Microsoft.com/kb/947821

    ------------------------------------------------------------
    Because these are all Office updates you might get more information if necessary in the Agency of those groups that
    may have experienced the same problem.

    Office newsgroups
    http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

    Microsoft.public.office.misc discussions
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

    ------------------------------------------------------------

    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Vista Ultimate 32, HP 6110 printer does not

    Help needed here... Printer and the computer worked until yesterday when I need to print a doc somewhere part/whole way a problem was generated. I followed the advice of Vista Solutions Center to try to download the updates from HP 6110. First, as suggested, I inserted the HP 6110 installation disc and he ran at about 52% and stopped. Then I tried to download from the list of available printers, also no luck. No movement, no options, no nothing.

    I've uninstalled and reinstalled the printer, which still does not work. HP drivers printer and other components needed are already located in the Vista system and HP solution is to 'plug in' and it (the computer to recognize the drivers and programs necessary... it's not work guys.) HP says that Microsoft manages updates.

    What to try next? I would not buy another printer if I don't need it. I had perfer not to add no matter what more trash in our landfill sites...

    Thanks for any help or work arounds,

    Unplug the printer from the PC and go to printers & peripherals (printers, Start)... the printer itself should still be there because you have not uninstalled.  Click Properties from the server (top-right) and the tab drivers, remove any reference to it.  Click on apply, OK, go back to where the printer is in this Panel, right-click on it and choose uninstall.

    Now restart and all traces of it should be gone.

    Connect the printer to the PC – if possible, using another USB port.  Now, the PC recognizes there is a printer is connected, and if so, do you go to find the correct drivers?

    If nothing is found, then it might be that the printer is really dead.  If you have a friend of the PC you can try it, it's a good time to call, maybe they could bring a laptop in your place and you can check in this way.

  • new drive HARD Seagate Barracuda not recognized in the BIOS

    Hello

    The Inspiron 530 desktop computer BIOS does not recognize my new HARD drive. It's a Seagate Barracuda 500 GB (ST3500413AS). I try to reinstall Vista, but installation can't find a drive with 3.9 GB. Wrong type of drive in the BIOS found, I think that.

    Tried several things, but no results: check the BIOS, but with automatic selection drive only to find a 4 GB (wrong type), updated the BIOS drive (now 1.0.18), tried several drivers with startup etc.

    Think I need a good driver, but on the site Web of Seagate, they say that there is no firmware for this drive.

    can someone help me?

    THX, David

    Thanks for all the support.

    It wasn't a problem with the SATA 3 or something like that, but the HARD drive was missing. There is no other choice. Come back with my HARD drive (and information) to the store and finally got a new. I hope that the other works :)

    THX and greetings

  • 160 GB external hard drive of Gigastore is not recognized correctly

    Hi, hope someone can help me!

    I bought a 160 GB external drive Gigastore hard today, but the plug inside, the computer did not recognize it. In fact, nothing happened. I tried all the usual as control to see if it was in my computer and then right click my computer, manage, etc computer management, but again, she did not show. I tested it on another pc and still does not work. I'll put up the wires correctly, so this isn't the issue.

    When I turn on the power, the hard drive light constantly flashes blue. I would have thought that will be that the hard drive has been slowed down, that he would stay on continuously without blinking. Could someone let me know if this blinking determines that the disk does not just and it is indeed tired?

    Phil

    Hello

    It seems that it s not a laptop fault because the other laptop or PC can not recognize the external HARD drive.
    Have you checked if some additional drivers or tools were shipped with this external HARD drive device?
    If please connect the HARD drive and use the Add Hardware option

  • DVD-R drive SD-R6012 is not recognized on 6000 SP

    Hello

    I tried to install this drive in my notebook 6000 SP, but the system will recognize and when to start the laptop I get always an error 'IDE #1. Can someone help me?

    Hello

    As Joey says he s seems that the disc is not compatible due to the assignment of pins.
    You should always check the parts if they are compatible before buying.
    I think that this road is to master. In this case, BIOS have problem to recognize this part correctly because the HARD drive is also set to master.
    In this case, you need a new. It of not possible o solve this problem another way :(

    Good bye

Maybe you are looking for