DVD-R drive SD-R6012 is not recognized on 6000 SP

Similar Questions

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• My CD/DVD drive has disappeared / is not recognized

  My CD/DVD drive is not recognized. I don't see what may have caused it, the only thing that I changed it recently on my computer is a windows update.

  In the Device Manager under CD/DVD-ROM drives, there is a subcategory of TSST corp CDDVDW SH - S223F ATA Device (I presume it's the name of my drive) and when I go on properties in that under device status it says

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click "Find solutions to send data about this device to Microsoft and to see if there is a solution available."

  After clicking on "check for solutions" nothing seems to happen, can anyone help?

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Driver for my printer not recognized by windows 8. Device

  I tried to install an old printer in windows8. The pilot was not available and none was available at HP. I get the message not recognized usb device and I can't get rid of the message. Chat help or tech support Microsoft have not been able to help. all of the suggestions.

  If this printer manufacturer provides no driver win7/8 and windows update via Add printer has no drivers, its does not work

  And any workaround method will be more expensive than buying a new printer compatible

• DBMS driver exception was: locale not recognized

  I am deploying example demo on weblogic Server intgrated hr using hr on the oracle database schema.

  the HR_EJB_JPA example compile with an error but not deployed and I get this error: weblogic.common.ResourceException: weblogic.common.ResourceException: could not create a connection from the pool. With the exception of the DBMS driver: unrecognized locale [13: 47:27] deployment cancelled. [13: 47:27] - incomplete deployment. [13: 47:27] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer) # can't run application HR_EJB_JPA due to the deployment on IntegratedWebLogicServer error. [HR_EJB_JPA application stopped and cancelled Server Instance IntegratedWebLogicServer]

  What is your locale.

  Can change you to English of the United States, if they are not.

  To change the country or region setting

  1. Open region and language by clicking on the Start button, click on the Control Panel, clicking clock, language and region, and then by clicking on the region and language.
  2. Click the location tab, select your location from the list, and then click OK.

  Refer

  My Java Dev Blog: Weblogic datasource error: locale not recognized after upgrade the Oracle 9 pilot - & gt; 10

  Thank you

• DVD-ROM drive works, but does not appear in 'Computer' and discs can be played

  I totally messed up my DVD - ROM drive. After graduating the famous blue screen of death once yesterday and once today, I thought that my PC settings reset would fix the problem. Then, I pressed F2 when my computer starts and resets all settings. Unforunately, this is something serious to my DVD - ROM drive. Initially, it did not work, so I opened my computer and somehow got it works. But now, it does not detect the disks I insert in there. I get the message "no DVD - ROM drive found."

  Anyone know if it's fixable? I hope I don't have to take my computer somewhere for repair. Unforunately, I don't know the make or model of the hard drive. My the PC features that I think are important are listed below.

  I watch this thread, so if I'm on my PC I will be notified by email of responses.

  Characteristics of the computer:

  Model: Dell Dimension E520
  OS: Windows Vista Home Premium (32 bit)
  Video card: ATI Radeon HD 2400 PRO

  Message edited by Jesant13 on 27/06/2008 20:47
  
  

• Driver webcam, peripheral USB not recognized?

  I have the MSI WIND U135. I use Windows XP and everytime I turn on my webcam, it comes up with the bubble yellow saying: USB device not recognized. In Device Manager, I usually have a scanner and camera tab, but I have now.  I don't know what to do. Thanks in advance for the help.

  Hello Megan, you can resolve this problem by updating the drivers...

  Download each of these files and right-click on it and click on extract all. Then go to the folder and run the Setup file and follow the instructions.
  Each of them, install in the order that they are listed below.

  1. Intel 5 Series Chipset cs_intel5series_9.1.1.1027_al00.zip
  2. Simple Face easyface_nb_all_11036.zip
  3. Simple camera app: webcamtool_vr630_xp32_nb.zip

  After installation, restart your PC, and it should work.

  If it does not, then there is a hardware failure in an integrated device. If it is under warranty, you can get it checked by the manufacturer.

• The DVD - R Matshita Uj-898 is not recognized by windows xp.

  or when run fix - it, the drive is recognized but there is a problem with the installation and in the end, the issue is not fixed-WHAT TO DO - cannot read any CD

  The standard driver does not work, and there is no specific driver for the DVD drive. Microsoft software to fix recognizes the issue but is not fixation ti here is the message that drive is detected but problem with the installation took place, and it will not work properly.

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• CD/DVD RW drive bed but will not write...

  I use Windows XP and use the disk drive: Optiarc DVD RW AD - 7530A. Under "Properties" is the State of the device "working properly" and he plays both CDs and DVDs. However, it will not write. I tried several software programs, including windows Media Player. When I right click on the driver, there is a recording tab.

  The drive appears to work at first, but it can progress remains at 0% and the drive will continue as he does something, but it's not. If I try to cancel the burning using buttons in the software, nothing will happen. It will freeze my computer. The Task Manager will not work, and my only option is to keep the off button on the laptop until it dies. When I turn it back on, a small window pops up saying files are waiting to be transferred to disk, click on the bubble to continue (or something like that). If I click on it, then I see the blue screen of death and the computer shuts down.
  He also seems to have done something for my Explorer, it freezes too (I'm on Safari now)

  may be a full AV scan VIRUS.

• Vista Ultimate 64 - Driver scanner Canon 4400f not recognized/corrupted

  I have a USB of Canon 4400F scanner that works fine with other computers (Vista laptop and a desktop Windows XP), but for some reason any drivers/registry for this device is messed up on my PC, and it will not (re) install correctly.
  It worked perfectly for a long time (over a year), but do not use it for a while, after he is now stuck in the same unusable state, no matter what I do. I suppose that some day that something has caused this.

  All started with Device Manager telling me that the scanner was disabled when I had a glance to see why the scanner did not work. So, I allowed it. Status changed and then "no drivers are installed for this device. Yet, in the tab drivers, drivers are listed (good version) and appear as it should (the driver dll files are still visible and correct).

  So here's what I've tried:

  (1) uninstall the device and drivers. Reset. Reinstall the drivers, then plug in the device. Status: disabled. Activation of gives the original problem no 'drivers '.

  (2) uninstall again, this time including the devices 'hidden' when he was in other USB ports. Searched the registry for all traces of the appliance, by product ID, code provider GUID, name of the manufacturer etc.. Deleted every file temp (windows General and specific user) and also the windows update "DataStore" and "Downloads" folder just to be safe.
  Now, this method worked in the past for a U3 USB key that there was an identical error. This time? Restart, install the drivers, install device - FAIL. Even disabled error followed by 'pilots No. "

  Drastic 3) measures - (2), but also uninstalled and reinstalled the USB drivers themselves for controllers and hubs. Rebooted and waited while each unique device USB driver has been installed from scratch (mouse, keyboard, etc.). Install scanner drivers and plugged into the scanner. Same end result - all USB works except the scanner.

  I tried the above with both versions of the drivers from the Canon Website and the original driver CD.

  Is there another location on the C: drive or in the registry that I might be missing? Again, this scanner works fine when I install it on other PCs that have never seen before, so I'm convinced it's my registry or files corrupted, hidden somewhere in C:\Windows\. All my other USB devices work perfectly.

  Without having to reinstall Windows, is there a way to reset all USB and Windows thinks that he has never seen a single USB device before? As I said, the scanner works perfectly when I plug it into another PC - no need to install the drivers as Windows Update Gets the last and it works!

  System information:
  Windows Vista Ultimate 64 bit
  4 GB OF RAM
  AMD Phenom 9950 CPU
  Lots of disk space

  Karena,

  Thanks for your suggestion - but I managed to fix another way before I saw your post, so I have not been able to test your method.
  I uninstalled SP2 (with the intention of doing a repair using my Vista SP1 DVD). However, after removing SP2, the scanner worked! Then I reinstalled SP2 and it still works. A little boring because we won't know what was arrested exactly-, but I guess that this method could have changed the location of the registry that you mentioned?

  I bookmarked this thread for future use so, thank you again for answering.

  Dave

• 160 GB external hard drive of Gigastore is not recognized correctly

  Hi, hope someone can help me!

  I bought a 160 GB external drive Gigastore hard today, but the plug inside, the computer did not recognize it. In fact, nothing happened. I tried all the usual as control to see if it was in my computer and then right click my computer, manage, etc computer management, but again, she did not show. I tested it on another pc and still does not work. I'll put up the wires correctly, so this isn't the issue.

  When I turn on the power, the hard drive light constantly flashes blue. I would have thought that will be that the hard drive has been slowed down, that he would stay on continuously without blinking. Could someone let me know if this blinking determines that the disk does not just and it is indeed tired?

  Phil

  Hello

  It seems that it s not a laptop fault because the other laptop or PC can not recognize the external HARD drive.
  Have you checked if some additional drivers or tools were shipped with this external HARD drive device?
  If please connect the HARD drive and use the Add Hardware option

• HP DVD A DS8A9SH SATA CdRom Device not recognized by my laptop

  All of a sudden, my laptop does not recognize my CD / DVD player

  What can I do?

  HP laptop with windows 8.1 455 OS

  Hello:

  Please see if the steps following resolution 2, 3, 4 or 5 to solve the problem.

  Normally, one of them will.

  http://support.Microsoft.com/kb/314060

• HP Pavilion Slimline s5212y: my camera to DVD A DH16AAL ATA s5212y Pavilion not recognized in the system after the installation of Windows 10.

  After you have installed the free version of Microsoft Windows 10, I realized that my DVD was neither effective nor recognized in Device Manager. Try as I may to address the support of hp in any problems and try to find updates or fixes to the problem, I have since restored my OS to the older operating system to Windows 7.

  I would like to know if there is a simple patch patch out there in the community that would allow my DVD-ROM to 'see' if I chose to upgrade to Windows 10?

  If there is a "patch" of sorts, I need to have the new operating system installed first?

  Hello:

  The only suggestion I can offer if you haven't tried these, would be to perform the steps listed in each step resolution 3 or 5 from the link below.   Try them both.

  https://support.Microsoft.com/en-us/KB/314060

• Drive HARD secondary is not recognized

  I installed a new secondary 250 gb HDD in my counter top, but the computer does not recognize it. Help, please?

  Right-click on my computer, go in manage, go to disk management and find the 250 GB hard drive.  There's likely to be a black color.  Right-click on the drive and select initialize.  Then right click on the black section and select format.  Follow the prompt on the screen.

• new drive HARD Seagate Barracuda not recognized in the BIOS

  Hello

  The Inspiron 530 desktop computer BIOS does not recognize my new HARD drive. It's a Seagate Barracuda 500 GB (ST3500413AS). I try to reinstall Vista, but installation can't find a drive with 3.9 GB. Wrong type of drive in the BIOS found, I think that.

  Tried several things, but no results: check the BIOS, but with automatic selection drive only to find a 4 GB (wrong type), updated the BIOS drive (now 1.0.18), tried several drivers with startup etc.

  Think I need a good driver, but on the site Web of Seagate, they say that there is no firmware for this drive.

  can someone help me?

  THX, David

  Thanks for all the support.

  It wasn't a problem with the SATA 3 or something like that, but the HARD drive was missing. There is no other choice. Come back with my HARD drive (and information) to the store and finally got a new. I hope that the other works :)

  THX and greetings