Defender stops.

Similar Questions

• Windows Defender stop working after the malicious software removal tool

  I ran windows software and after this removal tool, my windows Defender stopped working says its turned off, but when I try to turn it on nothing happens

  This problem can occur because another security application is used or the Windows Defender service has stopped, or components of Windows Defender are corrupt.

  You install any new programs recently? Windows Defender is not designed to protect against the extent of malware. If programs like Microsoft Security Essentials and Windows Defender both run, your system may experience degradation in performance and other problems caused by the conflict of two services providing real-time protection at the same time. I recommend that you keep the Defender off if another application of security protection is running.

  If no similar security application is installed, I suggest that we have follow these steps to resolve the problem:

  Step 1: Check the Windows Defender service
  =================================
  1. click on start, in the search box, type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. double-click on the service "Windows Defender".
  3. click on the 'general' tab. Make sure the "Startup Type" is "automatic". Then please click on "Start" under "Status of Service" to start the service.

  If the problem is not resolved, please refer to step 2:

  Step 2: Save the associated DLL files
  ========================
  1. click on start, type "cmd" (without the quotes) in the box start the search. Right click on CMD listed above and click 'run as administrator '.

  2. in the command prompt, type the following and press ENTER to each order:

  regsvr32 atl.dll

  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 softpub.dll
  regsvr32 mssip32.dll

  3. close the command prompt, and then run Windows Defender.

  If the problem persists, please after return.

• Windows Defender stops on index.dat

  Malfunction of Windows Defender

  Windows Defender scans until it reaches the file C:\Users\Cake\AppData\Roaming\Microsoft\Windows\Cookies\index.dat then stops?

  Why is this happening and how can I solve this problem?

  Hello

  Did you change your computer?

  Method 1:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  Troubleshooting of Windows Defender

  http://support.Microsoft.com/kb/555957

  Enable or disable the Windows Defender

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Update definitions for Windows Defender

  http://Windows.Microsoft.com/en-us/Windows-Vista/keep-Windows-Defender-definitions-up-to-date

  Search for spyware and other potentially unwanted software

  http://Windows.Microsoft.com/en-us/Windows-Vista/scan-for-spyware-and-other-potentially-unwanted-software

  How to delete cookie files in Internet Explorer

  http://support.Microsoft.com/kb/278835

• Windows Defender stopped running on 6/17. Now I get the error 0x800705b4.

  I rebooted, attempted to restart and got the above error message.  I also received a message of error 0x800106ba.  I tried to down load Windows Defender for Vista, but it will download it will not be installed.  The message is 'you don't need to install this software, because Windows Defender is included in Windows Vista.  You can access Windows Defender from the Security section of the Windows Control Panel. "Of course, when I try to run Windows Defender, I get an error message of"0x800106ba.  A problem caused this program service stop.  To start the service, restart your computer. Well I have and I still can't Windows Defender to start.  All of my Microsoft updates are in place.  Help!

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Why is windows defender stopped every time I turn on my compurtrer

  Defend Windows is turned off when I start my compurter and sometimes even if I'm on it, I'm so constqntly again.

  WHY?

  If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok.
  It's normal.
  List of AVs which will stop Windows Defender:

  Norton
  McAfee
  AVG
  Microsoft Security
  Essentials

  If you don't have AV programs above, here's how to restart Windows Defender:

  Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows
  Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• Windows Defender stopped yesterday on my Windows 7 (SP1)?

  I check Services and its has been arrested - when I tried to Start, I got these two messages.

  "The program is disabled.
  Click here to start"

  Gave me this error
  "The program is blocked by group policy.
  Error 0x800704ec

  It is a 1st for me, running Windows 7 (Sp1) (with a blocker GWX Control Panel, don't want OS 10 again) Avast Internet Security (who had an update to version 2 days ago) + MBAM, & SAS & Malwarebytes Anti-Exploit (no changes to the MBAE) but I didn't add Defender as one Exclusion on the other three?

  I can't open to all the Defender & I got the downloads for it several days ago. I almost tried everything? All security programs used to run?  but no Defender... Trend Micro House Call - is clean.  anyone help - or someone else?  best regards & thanks. I hope I posted this in the right area?

  Please see: Avast 12.2.2276 and Windows Defender (Windows 7)

  See you soon,.

  J

• How windows Defender to continue to run with security essentials

  How windows Defender to continue to run with most of the security. When I installed the essentials Defender stopped running. I tried everything I know. missing in admin tools and all programs and it starts and stops. Oh, I'm on Dell Inspiron 545 Vista 64-bit Service Pak 2

  Hello

  Defender is NOT supposed to work with MSE, and there is no worlaround.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Windows Defender does not start automatically now.

  Since last week, Windows Defender will automatically start.  He has always done in the past.  It shows to the extent permitted in the list in the Windows Explorer startup programs and also listed as automatic in the section of the computer management services.  I opened a few days ago to check the updates, and I got a little window that says "Windows Defender is disabled" and it had a link to activate it, I clicked, and it did turn on.  Because of this, whenever I turn on my laptop, I check Windows Defender and of course, she is still not and I have to turn it on manually.  I also have McAfee Security Suite, Spybot Search & Destroy and Microsoft Security Essentials, Ad Aware, Malware Bytes.  More McAfee is the only one that I pay.  But I had all these programs installed to the Windows Defender stopped automatically starting.  I don't have the error messages and have never know on this subject if I did not check for updates once.  I am running Vista Home Basic 32-bit with SP2.

  Alice L.

  See the excellent response of Mick [Hi Mick].

  In addition...

  In order to avoid conflicts and errors please do not run two antivirus programs (McAfee and Microsoft Security Essentials) and two antispyware programs at the same time.

  "McAfee 2009 for Windows Vista consumer products disable Microsoft Windows Defender to improve the performance of the system. Windows Vista users who have installed the McAfee 2009 consumer products should not activate Windows Defender... »
  See: http://service.mcafee.com/faqdocument.aspx?id=TS100610

  If still no joy, please contact McAfee Support

  Hope this helps, Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop experience & Security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• Windows Defender won't let me to open the startup programs

  Hello, I have a Vista ultimate on my computer. I use Norton Security. I want to delete some startup programs. Go to the Control Panel, clicking Startup Programs - Windows Open saying that Windows Defender is disabled... I click on the link to activate on - nothing happens.   If I go to the computer - manage-Windows defender - turn on the green line starts to load, then says: "Windows Defender stopped... because it will be not necessary" or sth. Like this. Looks like I have this problem after installing Norton. There are options to disable firewall and Antivirus-if I use them that nothing changes. Any suggestions?

  Hello, I have a Vista ultimate on my computer. I use Norton Security. I want to delete some startup programs. Go to the Control Panel, clicking Startup Programs - Windows Open saying that Windows Defender is disabled... I click on the link to activate on - nothing happens.   If I go to the computer - manage-Windows defender - turn on the green line starts to load, then says: "Windows Defender stopped... because it will be not necessary" or sth. Like this. Looks like I have this problem after installing Norton. There are options to disable firewall and Antivirus-if I use them that nothing changes. Any suggestions?

  How to check and change Vista startup programs

  1. open the Start Menu.

  2 in the white line (search) box, type msconfig and pressenter .

  3 click on continue in the UAC prompt.

  4 click the Start (see screenshot below)

  5 to disable a startup - program

  (A) uncheck the startup program.
  NOTE: Button click on disable all uncheck all startup programs.

  6 to allow a startup - program

  (A) check, start the program you already disabled (unchecked) front.
  NOTE: Click on turn on all the button to check all startup programs.

  7 click OK .

  

  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My Windows Defender will not remain, it turns off

  original title: My Windows Defender

  My Windows Defender will not stay on, even though I have a scan scheduled @ 02:00 every day. I do not understand why the Defender stops, and I get a warning telling me it's off. It analyzes every day @ 02:00, and I manually do a quick scan when I see the warning icon. Help!
  Thank you for your help.

  Bonnie Mayer

  Copy davidhk129 answer to the question of Windows Defender won't start do not:

  Here's a direct copy...

  If you have
  one of the following AV, antivirus, programs installed, it will stop your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok.
  It's normal.
  List of AVs which will stop Windows Defender:

  Norton
  McAfee
  AVG
  Microsoft Security
  Essentials

  If you don't have AV programs above, here's how to restart Windows Defender:

  Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows
  Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• Cannot activate Windows Defender after uninstalling Norton - laptop HP 2000

  I can't get Windows Defender to turn back. I uninstalled Norton.  I've updated for Windows 8.1 verifying that I have all the DLLs required, I could not access waueng.dll (error no code given) and c:\windows\system32\dllcache\wucltui.dll (error code 0 x 80070003). I don't want to reinstall or buy Norton.  Help, please.

  Hello

  I would say after the Norton Removal Tool to ensure there are no reminders left:

  https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us

  If it persists, try following these steps and check if this may help:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/Windows-Defender-stopped-working-error-0x80070003/1914d53c-8E6E-411F-A35b-b1cd1d7297e4

  Shlomi

• Do I need antivirus protection if I already use windows Defender?

  original title: Windows defender

  Need me anti-virus protection if I already use windows Defender. And why windows Defender stops whenever I turned off the computer?

  Defender is not an Anti Virus program, it's an Anti Spyware/Maleware program. Yes, you need an Anti Virus program to use along side of it. To answer why it turns off you must provide the details.

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• I can not install McAfee antivirus

  Original title: I installed cenot can virus anty bocouse Defender stop BitDefender antivarus McAfee
  -----

  I tray to install McAfee antivirus I have BitDefender antivirus stop mid problem

  Original title: I installed cenot can virus anty bocouse Defender stop BitDefender antivarus McAfee
  -----

  I tray to install McAfee antivirus I have BitDefender antivirus stop mid problem

  Three points:

  1. do not try to run nore than both antivirus protection.

  2, in my opinion (and that of many others of us here), McAfee is one of the poorest possible choices. I strongly recommend against it.

  3. for an anti-virus program, I recommend eSet NOD32, if you are willing to pay for it. If you want a free anti-virus, I recommend one (do not run more than one) of the following three:
   
  Avira AntiVir
  Avast
  Microsoft Security Essentials
   
  You also need anti-spyware software (even if you run a program like Microsoft Security Essentials, with anti-spyware feature integrated into it). I recommend that you download and install MalwareBytes AntiMalware (freeware)

• Install Wizard fails in WIN7 - file missing error?

  I had printing problems recently with my C6180 all-in-one printer.  For some reason, the print jobs have been suspended in the spooler or somewhere in the network (not sure yet but because of this new problem).  I've decided I want to uninstall then reinstall the printer drivers in the hope that the driver has been corrupted.  Uninstall seemed to go ok.  When I tried to reinstall, the wizard fails every time just after the screen where you can select which components to install and you must accept the EULA.  I get an error popup that says: "the system cannot find the file specified."  He didn't tell me which file it needs, and ends the installation at this point.

  I've tried everything I can think of doing work - cutting the antivirus (AVG & Windows Defender), stop out-no Microsoft, installation services in safemode, I went into my system and removed all the HP files I can find and identify, and I followed several different patches, I found here and online.  All fail at the same point.  HP does not have a newer version of the software (AIO_CDA_FSW_Full_Win_WW_130_140.exe), but I downloaded it again just to be sure.

  I think it's probably a Windows file that it is absent, but I really have no way of knowing for sure.  You would think that with a 300 MB installation file, they understand all the * beep * the files needed to install in itself!

  My system is running Windows 7, 64-bit with all latest updates.

  I'm at my wits end now and all ideas!  Can someone help me please?  Thank you!

  Finally figured it out!

  I uninstalled HP Solution Center again completely and reinstalled once more.  This time he actually found my printer, although he posted only the wireless configuration.  I thought it was weird, because I had the ethernet cable is connected and the wireless off.  I tried several times in different ways so that it can establish a connection, but whenever he failed and told me to turn off my firewall, etc..  I tried with and without the firewall.  Nothing did not work.  I therefore decided to return to my router settings and check again for any problem here.

  The control panel of my router is very basic and almost no parameters to be set.  I reinstalled the software of the router and now, I had total control of all the options I want.  One thing jumped out of me almost immediately - my C6180 and my Chromecast both share the same IP address!  Go figure!  I'm gone in my printer, changed the IP, rebooted the router and re-directed the installation of device HP program.  It went pretty well, except for hanging them on one of the screens.  I force closed, and Installer picked up right where it hung and continued the installation successfully.  Printing and scanning now work correctly.

  Thank you very much for your help!

• My windows Defender is set to off, when I try to change as a result, he stops and tells me to reset, I try and it always goes back to zero.

  Original title: security settings

  My windows Defender is set to off, when I try to change as a result, he stops and tells me to reset, I try and it always goes back to zero.

  How can I solve this problem

  Hello

  
  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?
  3. What is the full error you get, when you try to activate windows Defender?
  4. what anti-virus is installed on the computer?
  
  Method 1: Check if the Windows Defender service is enabled.
  a: Type Services.msc in the start search box and click on enter.
  b : now, look for a service called Windows Defender, double-click to open it.
  c: Now Start the service and make sure that it is set to automatic.
  
  Method 2: Temporarily disable the antivirus and check if the problem occurs.
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  
  Note: Activate the anti-virus program after you perform this step, because it would protect your computer from threats.
  Note: If there is an antivirus installed, then it might be turn off Windows Defender, so temporarily disable the antivirus and check if the problem occurs.
  
  Hope this information helps.