definition of the margin on HP Photosmart C4580 series pilot 5.0.4

Similar Questions

• How can I change the SSID to a Photosmart C4580?

  I browsed the forum and read some articles which none still worked. I use a Mac and spin the OS of Yosemite. In the sourse of trying to get the ro printer recognize the new router I have rest the factory default, so he now tells me that the SSID is hpsetup. How can I now change that to pick up the new router SSID?

  Hey Andy,

  You can try to enter the password in the section "WPA - PSK", instead of "WEP encryption" section, to see if it will work. It won't hurt to not test.

  Here are a few screenshots from another thread with someone who has the same issue which may help:

  Photosmart C4580 spend direct USB for iMac, wireless through Time Capsule

  If try your password does not work, you can try an application called Keychain, which can be used to retrieve wireless password, just to make sure that you use the same one.

  How to manage passwords with Keychain Access

  I hope that helps you

• Reduction of the print size HP Photosmart C4500 series page

  I have a HP Photosmart C4500 series and it is not printing to fit the entire page. The page is reduced in size (from about a third of the page) and some words are cut off. This only happens when I print a Web page. The print preview shows she will be printed to fit the page, but it never does. I use a Macbook Pro and I print wireless. I don't have the CD to reinstall the printer with me. Help?

  Thank you!

  Hi @afc13,

  Welcome to the HP Forums!

  I understand that your HP Photosmart c4500 series prints a page of size reduced on your Mac, and I'm happy to help you!

  I recommend the following:

  1. Reset the printing system. OS X Mavericks: reset the printing system.
  2. Verify and repair disk permissions. 12.x disk utility: repair disk permissions.

  Let's start with these two steps, and then we'll go from there!

• HP photosmart c4580 program cannot find the installation 7zs7e9a file

  HP photosmart c4580 after installation at the start of problem cannot find the 7zs7e9a Setup file.

  cancellation of the attempt to install the software will run without problem.

  tried to extract files without 7zs7e9a file in the temp directory

  all solutions?

  I solved this problem. It was the error of Microsoft Installer program tried to run the corrupted original due to an MSI installation. the quickest way to fix the problem was to uninstall and reinstall the hp software.

  PS

  OS vista Home premium 64-bit

  Thank you for your quick response

  concerning

  clhxo

• I have a Photosmart C4580 all-in-one, do I need a wired connection to analyze instead of the wireless

  PhotoSmart C4580 - windows 7 - wireless set up - how to scan? No problem to print or copy, except the printing from the internet. Keep getting errror occurred in the script on this page. HP does support not any help so far

  Thanks Sabretooth04 works great now. Much better than with an old computer and printer just to analyze something

• HP Photosmart C4580 all-in-One: the hp Device Manager

  I recently moved and wireless printing is no longer available, because I have a new router, etc. I'm trying to go through the steps to get my printer to print wireless again. I started with the (difficult to understand) online books and forums, but I encountered a problem.

  A step now asks me to open on my Mac HP Device Manager, but I do not have this program. I guess that it has deleted along the way. Where can I download to continue to implement the capabilities of my wifi printer?

  Thank you!

  Hello @joyandlady,

  Welcome to the Forums of HP Support!

  I would like to help you today with the configuration of your HP Photosmart C4580 all-in-One printer to print wirelessly with your computer Mac OS X 10.7. The Device Manager is a feature of the Windows operating system. I don't know why you got a quick for you going into the Device Manager, but it is not possible for your Mac operating system. Now, because of the age of your unit HP Photosmart there is no downloadable HP full feature software or driver for your printer in Mac OS X 10.7. Therefore, you rely on an update from Apple to install printing and scanning of the capabilities of your printer on your Mac. For this reason, you are not able to perform normal wireless setup wireless for your printer configuration is done via the installation package. For this reason, we have two options.

  Option 1: Install the printer on a supported operating system and run the wireless installation. Once the wireless feature is successfully configured you simply (+) add your printer to your Mac OS X 10.7 for printing and scanning.

  Your printer has a pilot full of features in favor:

  • Mac OS X 10.4
  • Mac OS X 10.5
  • Mac OS X 10.6
  • Windows XP
  • Windows Vista
  • Windows 7
  • Windows 8
  • Windows 8.1

  These operating systems listed will allow you to easily configure the feature wireless on your printer.

  Option 2: Run an Ad Hoc of the wireless installation. This can be a bit difficult. To set up your printer through the Ad-Hoc connection, please follow the steps below.

  1. Let's start by you information computers Mac network gathering because we will need shortly. Go to the Apple and select System Preferences

  2. Select the network

  3. when the network window opens, choose Airport (or Wifi) on the left side:

  

  4. click on the button "Advanced" at the bottom on the left.

  5. Select the TCP/IP tab at the top

  6. take note of the IP address of your computer that we need to reference later

  7 enter your subnet mask and the numbers of your router (default gateway) , because we have also to those too:

  

  8. close the network window.

  9. click on the icon Wireless at the top of your Mac on the right side:

  

  10. connect to the network that appears with your HP C4580 inside.

  11. on your printer wireless light should go solid after a few minutes. At this point, you want to print a Network Configuration report.
  

  Print a Network Configuration report using the button Wireless on the product, press the grey button until print a Network Configuration Page is highlighted, and then press the Green button. A Configuration page prints, including the IP address you need to the next step.

  12. the Network Configuration report new take the new IP address 169.254.xxx.xxx and open your Internet browser.

  13. your Internet browser will not load a real Web site, because you are not on the Internet right now:

  

  14 take your new 169.254.xxx.xxx IP address and enter it in the address bar of web page anyway and go to this site. Do not include the www.

  15. click on the Networking at the top tab:

  

  16. Select connection on the left hand side

  17 select Wireless at the top and then Advanced:

  

  18 type your SSID (your home or business Internet network name)

  19 select Infrastructure

  20 choose your encryption. He will already be WEP or WPA (you may need to ask your internet provider if you don't know what yours is)

  21 type your network (password/password) in the field below WPA or WEP key, one that corresponds to your type of encryption that is given to you by your internet provider.

  22. click on apply bottom-right:

  

  23. on your Mac , click the Wireless at the top:

  

  24. reconnect to your normal Internet

  25. go to Apple - System Preferences - select print and scan

  26. click on the Plus (+) button to add your printer Hello

  Now that your wireless printer is added, please test printing.

  Please reply to this message with the result of your troubleshooting. If you prefer to run the installation Wireless under an operating system that is supported, please let me know which operating system you use, and I can guide you through these steps. Good luck!

• Cannot run the installation of the software for Photosmart C4580 with 8.1 (64)

  I deleted all the software my computer HP running Windows 8.1 (64-bit) and tried to reinstall the drivers and clean software for both my Photosmart C4580 and for my Scanjet G4010, but when the installation starts after downloading, I get an error for each device dialog box "the system cannot find the file (or reader) specified. The dialog box header is "Users/Philip/AppData/Local/Temp/7zS7D57/installation/hpzpnp"... »

  I can't get past this error message no matter how, I try to download and install. The printer still prints from another laptop in the network it is connected via the network, while the scanner is connected by USB.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  8. After completing the two printers installattions rename the old file name extension to Dat and restart your PC.

  Kind regards
  Shlomi

• Problems to install the driver for printer HP Photosmart C4580 point Windows 8.1

  I bought a new laptop (Asus i7 with Win 8.1) and I'am trying to install the current driver for my HP Photosmart C4580 printer. I downloaded the driver full HP website: size 233 Kb, but when I try to install it I get the same message: ' Impossibile find it file specificato: c:\Users\Appdata\Local\Temp\7zs08EC\Setup\hpzpnp.ic...» »

  Please help me. TXS a lot.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Cannot close the menu copy so we can print with the Photosmart C4580

  HP Photosmart C4580 all-in-One

  By mistake, we hit the button settings label number 3.  We do not have memory installed maps.  The instructions say that this:

  Otherwise, this button opens the copy settings menu.  Our problem is that we cannot close this menu so that we can print.

  We followed a hot and cold reset reset procedures without result.  The User Guide does not mention how to close this setting.

  So, we can now use the printer.  Can someone help us please?

  Thank you very much in advance,

  Yours,

  Sky22

  As I mentioned in the first post, I tried the hot and cold nothing works reset procedures.  I finally came to my senses and remove the printer and let windows 7 install the drivers again.  Then it worked.  I should have done that right away.

• No drivers on the HP PhotoSmart C4580 for Mac OSX Lion site

  I have a Photosmart C4580. I upgraded my Mac OSX Lion book about 6 months ago. Reinstalled the printer software and had no problems. It is up to AT & T Uverse sent me a new gateway/modem. I have of course with the new wireless modem get the printer connected to the network. I couldn't get this to work so I decided to uninstall and reinstall the printer. When I go to the HP website there are no drivers for this printer for Mac OSX. I'm not a tech savvy person, btw. Thank you.

  It seems that you have installed the printer twice and there is some sort of bug with the printer 'offline '. I would just move forward a delete it if everything works as it should with the new printer 'lazy '.

  -Sean

• cannot configure photosmart c4580 to connect to my wireless network

  I tried to connect my photosmart c4580 following your instructions and got to the last step and after I hit APPLY, the grip of the page for a while then it says "the server where the page does not.  I hit refresh several times but no luck.  I'm stuck.  Any suggesstions?

  Hi @BossLady2,

  Welcome to the Forums of HP Support! I see that you have problems affecting the printer through the network wireless on the Mac. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

• Photosmart C4580 all-in-One - color print is not true

  Regardless of the software application in use, our printer does not print the colors on the screen. We have worked through all the settings and the types of paper and color choices, and nothing seems to make a difference. Tonight I prepared a certificate using PowerPoint and one of the predefined themes - nice blue background prnited on a Brown dirty. Ideas, suggestions, etc.?

  Hello there Hermits2,

  I saw your post on the issue of "print quality" you have little matter where you want to print from your Photosmart C4580.

  I understand that you have already tried several troubleshooting steps however, browse the guide below and if anything that you have not yet tried, try them. The print heads could very well be on their way if do not help the steps. If this is the case, then I would say calling HP support to see about a trade in option for you.

  Missing colors in printing

  If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Monday

• Win 8 - Photosmart c4580 not scan with HP Solution Center lack wifi

  HP Photosmart c4580

  8 64-bit Windows

  My printer is Photosmart c4580, and I have Windows 8 64-bit operating system.

  I can print throw my wi - fi connection, but I can't scan.

  If I want to analyze I need to plug the usb cable (10 meters long, because the printer is in the other room).

  I want to see the level of ink and I can't because I don't have the win8 HP Solution Center.

  Try to install the drivers win7 and Solution Center (PS_AIO_04_C4500_USW_Full_Win_WW_130_140.exe) (propriety - win7 run mode), and the program crashes.

  What can I do to scan using my wifi connection and installation of HP Solution Center

  Thank you

  Everything is ok now with the new drivers.

  Thank you

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109997-1 & CC = UK & DLC = in & LC = on & os = 4132 & Product = 3418707 & sw_lang = El

• HP Photosmart C4580 Wireless - can't get to work

  I just had to get a new computer and a new printer.  While I was there, I set up a wireless network.  I am running Windows Vista 64-bit on the new computer (gateway) and a HP Photosmart C4580 printer with wireless capability.  I can't the printer to work regularly.  Whenever I have reinstall, it works very well until it's the computer goes to sleep or stops.  Then, it no longer works.  Reinstall... it works... sleep, it stops working... vicious circle.

  I spent hours with HP cat trying to solve this problem and even more time to try to find me a solution.  This is my first HP product and I must say that I am at the end of my mind with him.  I can't believe that I'm the only one on Earth with a similar problem, but I can't find any help anywhere.  I'm sure I'm doing something wrong, but I did not have enough experience to understand and can't seem to find someone who does.

  I'd appreciate any help I can get at this point.  This is my last resort before you give up and go back to Dell!

  I have a few questions and suggestions:

  1. The IP address of the printer, the computer or both changes over time?
  2. I recommend that you set a computer DHCP reservation and the printer.  Connect to your wireless router, look for LAN Configuration, address reservation.  You should see a list of clients connected to the wireless router.  Define bookings of at least the printer and the computer.
  3. The SW (sorry about that) to uninstall and reinstall.

  With the IP address of the computer and the printer now set, the SW should not have problems to find the printer when it wakes up from sleep (I hope).

  BTW - unless you are using a surge protector, very inexpensive, the printer should be fine tuned on.   I think that the Councils to plug the printer directly into the wall, as a way to solve the problems SW is very interesting.

• HP Photosmart C4580 WIFI adapter

  I just bought a HP Photosmart C4580 WIFI, purchased from the United States. The included adapter is universal? It is, I simply a European plug on my power cable, or do I have to order a European adapter as well?

  Hello @andreasfmpro,

  I'm glad to hear that your all got power problem sorted.

  Regarding your print cartridge compatibility problems, this HP Photosmart is regionalized for cartridges. First installed cartridges will set the region in your printer in any region that the cartridges are purchased. Because you can not buy the HP 74 black cartridge or cartridge three colors HP 75 in Europe, your printer can be reset to allow a new regionalization to happen with your European cartridges.

  In order to reset the process of regionalization of the printer, you will need to call our technical helpline by phone.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  HP worldwide Support

  Happy holidays!