Defrag error message

Similar Questions

• Get error messages whenever I have try to defragment, & I also lost storage space. (less than 1%).

  Original title: memory problem & Defrag.

  I have a problem of the 2 part that has been building.  I get error messages whenever I have try to defragment, & then the Defragmenter stops.  I was just let go of the problem.  But then I noticed that I lost the memory space.  I deleted almost all of the programs that I can, but I still only 277MB of available memory (less than 1%).  I don't know what is using all my hard drive space.  There are only a few programs installed.  I'm also 99% fragmented.  Defrag won't work without releasing the memory of 15%, but even if I HAD the memory, all I ever get is an error message when I try to defragment.  Now, my computer is so slow, it takes about 3 minutes to open a web page.  As it should be obvious, I'm not all that tech savy.  What can I do?

  Right-click your drive (C :) and select Properties, click on disk cleanup, select the file that you want to remove and read the details below.) Put a check mark in the box of files that you want to remove and click OK.

  Now again click on disk cleanup and click on more Options tab ignore Windows components and programs installed.

  Under the system restore click clean up, and then click Yes if you do not experience other problems besides those that you mention in your message.

  Now, try to run Defrag and if you are unable to read the article below.

  http://support.Microsoft.com/kb/922379

• Ox80070002 and Ox8007000D error messages - I can't always solve the

  Hello

  It seems that my PC was unable to make an update of windows properly for a month now, and after having searched today, of Ox80070002 and Ox8007000D error messages come with updates.  I followed the advice of Microsoft online, but he is still unable to download the many updates.  As it also erases the log showing what are the files to download, I can now show you only those below.  I do not see anywhere how to ensure that these updates are downloaded successfully, so please can you help me?

  Windows XP Update security for Windows XP (KB2585542) February 12, 2012 Windows Update Windows XP A security update cumulative for Internet Explorer 8 for Windows XP (KB2618444) February 12, 2012 Windows Update Windows XP A security update for Internet Explorer 8 for Windows XP (KB2544521) February 12, 2012 Windows Update Windows XP Update security for Windows XP (KB2510531) February 12, 2012 Windows Update

  Try to download an update and manually install the same. You can search for manual downloads here:

  Search for a download
  http://www.Microsoft.com/downloads/search.aspx?displaylang=en

  Another suggestion, maybe a little maintenance hard disk as 'check disk' and 'defrag' can help to install the updates. This could be the cause of corruption, updates if the hard disk is fragmented badly etc.

  Your virus scanner is perhaps interfere with the update process.

  Recommendations for computers that are running Windows Server 2003, Windows 2000, or Windows XP Antivirus
  http://support.Microsoft.com/kb/822158

  Where you could get a support -

  Microsoft Windows Update support incident request:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Purchasing problems of installation of the security updates Microsoft may also visit the following page for assistance:
  https://consumersecuritysupport.Microsoft.com/

• I tried to run Check Disk and get an error message on the completion of the phase 2

  I tried to run Check Disk and get an error message on the completion of the phase 2. If I try to run a defrag without having completed verification of the disc it comes up with error message Disk Defragmenter has detected Chkdsk is scheduled to run on the Volume: c. Please run f / dskchk. I tried to run it and nothing seems to happen. I checked that I have no other programs running and she thinks that this is the case.

  * original title - I check disk / defrag problems *.

  Kevin.

  How old is the hard drive? It is still under warranty? The easiest way forward is to replace the drive.

• C:Windows/system32/rundll32.exe - Application not found - OK__I get this error message when you try to open a program

  Error messages occur now - seem to appear now, after I did a Defrag.  If I try to open AOL, it brings me to a display list who wants to choose from a list of programs.  For AOL, I click on AOL.  I didn't used to have to select from a list of display.  Then I tried to open an Astrology program and it took me to the same list, which of course is not.  Now, I get the same error as follows: C:Windows/system32/rundll32.exe - Application not found - OK

  Here's a Plan:

  Goto, start system restore restore Menu\All Programs\Accessories\System Tools\System

  Now select the oldest Restore Point and restore your computer, but first make sure that you have an external drive.

  After that C:\Windows\System32\Rundll32.exe copy the external drive and the disc is ejected

  Open the system restore and undo restore

  After the undo operation is copy the Rundll32.exe in the road to C:\Windows\System32

  and the problem solved

  Note: the rundll32.exe should be missed recently and you should have an old Restore Point which contains a file Rundll32.exe Intact

• I get this error message whenever I try to run the disc defragmentatio

  I get this error message whenever I try to run disk defrag c:\documentsandsettings\user\localsettings\applicationdata\microsoft\internetexplorer\recovery\active\recoverystore

  I really need to run defrag, but one can not because of that, I have looked everywhere but can't find and answer, please help it would be much appreciated

  I guess that a malware is the cause of the problem.

  Download this http://www.malwarebytes.org/

  Update and Scan. If this does not it, use this

  http://www.myantispyware.com/2009/10/28/how-to-remove-desktop-Defender-2010-uninstall-instructions/

• Error message saying no disk space on recovery drive E

  I have a laptop Dell Inspiron which is only a few months old and I use Vista Home Premium. I constantly receive an error message indicating that the recovery E: disk space is full. I went to the computer to check the available disk space and the bar is completely RED for drive E: of recovery. I have a lot of available memory on drive C: I tried to Defrag disk and disk cleanup. Disk Cleanup says 0 bytes will be released by empty my trash. That's because my basket is empty! I deleted all temporary internet files. I did a virus scan. I tried to save recovery E: files to an external site, but could not do this. I tried to delete the files and received a warning message if I did not complete this task. I copied the files to a folder of Documents, but that solves nothing. I called Dell Support and they said something on the partition. I tried to create my backup disks, but this error seems to be the way because he won't let me do this or the other. I cleaned my images and deleted all of the videos. I did everything that I know to free up space. I don't want to disable the error message, as some have suggested. I tried previously posted questions and answers on the forum, but I am unable to find my EXACT problem. If it is there, then I don't understand computer Lingo. My laptop is only a few months old, so I haven't added a large number of files. Why is that happening and how can I solve the problem? Please help!

  Dell computers are shipped with a recovery partition you can use to restore the computer to the way it was when it was new (usually by pressing F12 when the computer starts).   The problem is not that the recovery partition is almost full.  The problem is that Windows Vista should not access that partition at all and shouldn't the user.

  To delete the partition of Windows Vista and avoid the error message, remove the drive letter:

  1. click on the Start button.
  2 type diskmgmt.msc in the Search box and press enter .
  3. click continue at the user account control prompt.
  4. when the disk management window, right-click the E: partition, click change drive letter and paths... and click Remove .
  5. click on Yes .
  Steve Winograd, Microsoft MVP (Windows desktop experience)

• Blue screen and CORE-DATA-INPAGE-ERROR Message

  The blue screen and the CORE-DATA-INPAGE-ERROR Message appeared during extract some files, 2 consecuentlly. It has happened too, but not that often and during other processes. What should I do? The OS is Vista Home Premium.

  Indeed, I am here!

  Thank you for fixing links.

  The attached file of the DMP is to bug checking KMODE_EXCEPTION_NOT_HANDLED (1e) .

  This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  8th error checking, {c0000005, 9eaa4efc, e551bae0, 0}

  0: kd > 9eaa4efc ln
  (9eaa4eb2) win32k! PFEOBJ::vFreepfdg + 0x4a |  (9eaa4f65) win32k! MultiUserGreTrackRemoveEngResource

  The exception is produced in win32k! PFEOBJ::vFreepfdg + 0x4a.

  0: kd > k
  ChildEBP RetAddr
  e551b6a0 84071908 nt! KeBugCheckEx + 0x1e
  e551ba70 8409584 has nt! KiDispatchException + 0x1a9
  e551bad8 840957fe nt! CommonDispatchException + 0x4a
  e551bafc 8401e70c nt! KiExceptionExit + 0 x 186
  e551bb64 9eb38a95 hal! KfLowerIrql + 0 x 64
  e551bb84 9eafac21 win32k! RFONTOBJ::vDeleteRFONT + 0 x 130
  e551bbbc 9eafada2 win32k! vRestartKillRFONTList + 0x7b
  e551bbf0 9eaafcd7 win32k! PFTOBJ::bUnloadWorkhorse + 0 x 115
  e551bc1c 9eaaf8d9 win32k! vCleanupPrivateFonts + 0x4d
  e551bc34 9eaac06e win32k! NtGdiCloseProcess + 0x16c
  e551bc54 9eaabbad win32k! GdiProcessCallout + 0 x 145
  e551bc70 84262 has 48 win32k! W32pProcessCallout + 0x5d
  e551bcdc 8423f47f nt! PspExitThread + 0x4a0
  e551bcf4 840fde8e nt! PsExitSpecialApc + 0 x 22
  e551bd4c 84094d 42 nt! KiDeliverApc + 0x1dc
  e551bd4c 77a95d14 nt! KiServiceExit + 0 x 56
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  04adf6dc 0x77a95d14 00000000

  Associated police crashes, likely a buffer overrun.

  ---------------------------------------------

  1. remove the font cache and then restart > C:\Windows\System32\FNTCACHE. DAT

  * I recommend that you create a system restore point before that just to be sure: Vista - START | type rstrui - create a restore point.

  2 you have avast! + Security installed Aladdin, is at the origin of the conflict.

  Remove and replace avast! and Aladdin with temporary Microsoft Security Essentials for troubleshooting purposes:

  avast! removal - http://www.avast.com/uninstall-utility

  MSE - http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 uninstall Smart Defrag as soon as possible.

  4 uninstall RealNetworks as soon as POSSIBLE, the drivers are too old - 2003.

  Kind regards

  Patrick

• "windows has recovered from an unexpected error" error message has frozen.

  Hello, I have a problem with my laptop.  This has never happened before and just recently it spent d ' attribute.  I mainly use FireFox.  One day while browsing in the laptop froze as I began to browse Facebook with Internet Explorer.  It was frozen and stayed like that for over an hour.  The mouse icon showed something treatment but it shouldn't take an hour or more to process.  After pressing the power button to turn it off manually, I restarted.  A ran memtest that found no problem with the memory.  The HARD drive has been analyzed using System Mechanic for errors and claimed that fixed it.  I ran defrag my computer C:\ [Properties].  It froze again just by going to the homepage on FireFox.  After the reboot it froze after that came the message "Windows has recovered from a stop unexpected.".  I couldn't move the mouse, not capable of what be a right-click or bring up the Task Manager, but the mouse icon appears to show the transformation is done whenever I brought on the Windows error message.  What does that mean?  I've noticed more than a moment of mobsync.exe running when the system froze.

  Laptop a 3gigs of RAM and an Intel Pentium Dual-Core processor.  For some reason any reduced by concerts every week HARD disk space.  I'll update more and give more detailed specifications as soon as I can get my hands on my other diagnostic software.

  Update

  System Mechanic found the registry fragmented.

  Hi SoujiroMasaki,

  Thanks for keeping us posted and share this information with us.

  Please answer the question-

  The Windows was preinstalled on the computer?

  Method-

  If Windows was preinstalled on the computer, then I would have you contact the computer manufacturer to obtain a disc.

  We know if you need help. We will be happy to help you.

  Thank you.

• Parameters registry Highway 2007 error message

  Hello

  I used Highway 2007 on a daily basis for purposes of work for more than 5 years.
  Now, whenever I try to run the program I get the error message "your registry settings for the application were not copied correctly. To correct these settings, run put up again for this application etc"
  I uninstalled the program and re-installed, still no good. I uninstalled this new ran a defrag, and then re-installed with a new file name, still the same error message.
  Set myself up as a different user, still no good.
  I ran Microsoft fixit and still no good.
  I ran the other fixit of registry software and still no good.
  I've been on the site microsoft Web found this program but their web link does not work.
  I also have the same program on my laptop running windows 7 professional company and it works without any problem.
  My PC is quad AMD Phenom 9550 core 3 GB.
  Vista Home premium service pack 2.
  I spent hours trying to resolve this issue.
  Can anyone help!
  Chris

  Hello

  I would call and ask for more information:

  Microsoft UK
  http://www.Microsoft.com/en-GB/about/offices/readinghq.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Monitor blacks out, error message "does not signal.

  This problem just started today. My screen keeps blacking out. I checked the cables and they were good. I did a Defrag. I changed my settings to standby power screen forever. When the screen turns off, the error message is "" does not receive do not signal. "" Is this a hardware or driver problem? Thank you.

  Hello

   
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the computer?
   
  I suggest you try these methods and check.
  Method 1:
  Start your computer in last good known Configuration mode and check.
  Advanced startup options.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
   
  Method 2:
  If you find the same problem using last good known Configuration, start the computer in safe mode and check.
  Step 1:
  Start your computer in safe mode.
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  If the computer works fine in safe mode, uninstall the display driver, restart the computer in normal mode and check.
  Step 2:
  Uninstall the driver from Device Manager graphics card.
  1 right click on the computer icon
  2. Select manage from the menu.
  3. Select Device Manager in system tools that are listed in the resulting display.
  4. right click on the device.
  5. click on the driver tab.
  6. click on uninstall.
  7 restart the computer
  You can download and install the latest driver for graphics card on the computer manufacturer site.
  Graphics driver will reinstall after a reboot in normal mode, if the computer is connected to the Internet

• Media Center will not record or schedule, record of missing components error message, etc.

  1. removed internal tv tuner hauppauge HVR1600

  2. uninstalled the Hauppauge tv tuner driver,

  3 copied D: units media center TV recording to the disc ext file

  4 remove all records of Media Center TV to drive D:

  5 formatting D: drive

  6 disc cleaning & other defrag the C: drive.

  7. restarting the system... System in PLACE

  8 stop system

  9. reinstall the TV tuner

  10. system reboot

  11. the system automatically downloaded driver TV tuner

  12 Media Center has the same problems. !!!!!

  Before the problems of Media Center, I manually deleted all records of TV MC in the D: drive and copied manually on an external hard drive.

  I think that Manual deletions of records TV caused the problems of MC.

  How to uninstall the Media Center software?

  How to re-install this return?

  I don't have a recovery disk.

  I have a HP Media Center PC m7760n.

  Hi djsound,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. What is the exact error message that you receive?

  Method 1

  I suggest you reinstall Windows Media Center by following the below mentioned method and check if it works.

  (a) open the control panel in the start menu.

  (b) in the Control Panel, open programs and features.

  (c) Note: If the programs and features is not available, change the view by large icons at the top right of the control panel.

  (d) select Turn Windows features on or off in the left column of the window programs and features.

  (e) uncheck Windows Media Center, and then click OK.

  (f) click on restart now to restart the computer.

  (g) re-enable Media center of the control panel again.

  (h) try Media center.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-features-on-or-off

  A problem of recording TV on your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-recording-TV-on-your-computer

   

  Method 2

  If the previous step fails then I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• error message 0 x 81000005

  What to do about this error pls help my C drive is full

  Hi Giovanni,.

  Thank you for visiting Microsoft Community.

  1. According to the description, you receive error message 81000005 x 0.

  2. to which instance you get the error message?

  3. you get the message when executing backup?

  Step 1: Check the status of the drive in disk management:

  a. click on start

  b. type diskmgmt.msc in search field

  Follow the instructions in the links to free disk space:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Improve performance by defragmenting your hard drive

  http://Windows.Microsoft.com/en-us/Windows7/improve-performance-by-defragmenting-your-hard-disk

  For more information:

  
  Optimize Windows 7 for better performance
  

  http://Windows.Microsoft.com/is-is/Windows7/optimize-Windows-7-for-better-performance

  Data loss caveat:

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  For the anti-virus scanning:

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please post back with more details so that we can help you better.

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• error message when try to sync the iPhone, "invalid response from the device?

  What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

  -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.