Defragment disc runs slowly after installing new software antivirus

Similar Questions

• Vista won't open in Mode safe (after installing new software)

  I loaded new software (Stop Motion Pro) and the next time I rebooted, Vista is entered directly in Mode safe without asking.  I guess it's Safe Mode, although I have read some talk online that maybe he just screwed up my display settings and/or theme.  I tried readjusting my display settings and can't figure out how.  I also tried to remove the new software, but I don't see the option Add / Remove programs in Control Panel.  (The problem is that I want this software, so if I remove it, so what?)

  Hello

  Try a system restore before that has happened - you will need to re - install the software.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error when you try to install QuickTime: another installation is being run-cannot install new software

  Original title: another installation is being run-canot install new software.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I can't identify what software is running. I had this problem in recent weeks. It cannot install QuickTime.
  Thank you

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi marvinsadovsky,

  ·        What is the exact error you get when you try to install QuickTime?

  ·        You are able to install any other application?

  You try to install QuickTime by starting the computer in a clean boot state, because some background programs may interfere with the installation process. To put the computer in a clean boot state, follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After installing new ink cartridge cannot print from ipad hp 5510 series

  Unable to print from the iPad after installing new ink cartridge in a printer hp 5510.

  I can print from the laptop based on windows.

  the two settled on a wireless router.

  Help!

  (I reinstalled the software, reset the wireless, reset the computer, the hp 5519 is listed as the default printer.)

  Thanks for your reply. I did all these things and more... Finally observed that the IP address of the printer was 2 'off' the IP address of the iPad numbers.

  I've corrected the printer IP addy... and viola.

  IPad and laptop computer are once more compatible with the printer.

  Appreciate your message...

  Louise

• After installing new cartridges, printer icon says printer is off line. Tried to go in the passage of the off-line online, without any change.

  The printer itself doesn't seem to be the problem. Have disconnected the cables, and the message is offline, offline. Reconnect and he said just in offline mode. This makes me think that it is a software that I'm not waking up switching.

  I did the online diagnostics and he thinks that the printer is turned off. But it's not. Were do form here?

  "After installing new ink jet cartridges.

  The problem began after you opened the printer.

  I suggest you contact the manufacturer of the printer.

  See you soon.

  Mick Murphy - Microsoft partner

• I get error install 2894 window when I try to install new software.

  I apparently have a corrupt riched20.dll and riched32.dll.  This is the second time in a row that I can't install new software.  I worked with the seller on the first and told me I had a problem with riched32.dll and they can't fix this.  I ran Microsoft FixIt program, but it didn't turn anything.  I have a Windows 7 64-bit PC.  Is there a way to get a new copy of them. Thank you.

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• 2012 MacBook Pro running slowly after installation of el capitan

  I saw this post made by many people many times - that their computer started running slowly after the installation of the el capitan. I tried to read every post I could on this topic, and I can't find the solutions.  I was told that it could be everything from upgrading ram and an SSD hard drive, to the delivery of programs to remove the adware.  In the end, I can't understand why it runs very slowly now, the only change has been the upgrade to el capitan, otherwise everything went much before.   If someone knows a way to understand the problem or to find a solution that would be amazing!

  Download and view a report of Etrecheck:

  http://www.etresoft.com/etrecheck

  Ciao.

• DeskJet f4180: always E error message and empty cartridge light flashing after installing new cartridge

  I always get the error message E and empty flashing cartridge light after installing new black cartridge.

  Welcome to the @vinylzappaforum!

  I read on the 'E' and the empty cartridge light blinks after I installed a new black ink cartridge. If you have tried the guides that I suggested in our other thread here, so the next step would be to call phone support at HP to discuss your printer options coming with them. I let the info below.

  Please click the "accept as Solution" if we reached a solution and the "thumbs up" to say thank you for my help.

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Cannot install new software because XP has said that there is another current installation

  I try to install the new software of the printer and it stops telling me that there is an another current facility and cannot install new software until the current instalation ends.  She does whenever I try to install new software.  He did it with zune, Quicken, etc.

  Hello

  1. have you you can all changes on the computer before this problem?

  Check if the problem persists in the clean boot state.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

• Printer does not print after installing new ink cartridges

  I have a Lexmark X 2500 printer. After installing new print cartridges, the printer gives me the error message to order more ink. The printer does not recognize the new ink cartridges that have been installed.  There is a warning on the ink cartridges to do not touch the contacts on the bottom of the cartridges. If this happens, how can I make them work?

  Richard

  You should contact Lexmark as they know their best products and we can onlu support of Microsoft products on this site.

• Can not access iTunes store or Google Chrome after installing Trend Micro Antivirus

  How will I know how my firewall is supposed to be setup? Can't access iTunes store or Google Chrome after installing Trend Micro Antivirus.

  Maybe ask the experts in Trend Micro is the best for you...

  http://community.trendmicro.com/

• Update to Windows 7 RTM failing - error 80070652 - cannot install new software or run Windows Update successfully.

  I upgraded from Win 7 RC for Win 7 RTM on my 64-bit machine from Dell and started installing all my software.  Everything was fine until I started Windows Update and had a list of 15 updates that needed to be done.  Several have had agreements that I had to accept, he wasn't the normal process of "update in the background.  I had to leave and is concerned to let the process of continuous updating on its own and potentially hang, so I cancelled it.

  Since then, I can't install any software or to upgrade my system.  Updates fail with the error message "WindowsUpdate_80070652" which seems to be undefined.  In some cases, I get an error message another installation is running and the current installation or update cannot be performed until the end of the current installation.

  I restarted my dozens of machine time and then immediately began installing or upgrading windows - without success.

  Any suggestions would be greatly appreciated.  It seems that there is a dead plant that does not block updates and installs.

  Jeff

  It is not an error "undefined":

  WindowsUpdate_80070652 = ErrorClientUpdateInProgress ERROR_INSTALL_ALREADY_RUNNING
  The program to be upgraded is may be missing or the patch may update a different version of the program

  You could always...

  Launch a collateral request for assistance free Windows Update:
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Cannot access the printer software after installing new ink cartridge

  I installed new ink cartridges. It prints well but I can't access the printer on the computer action tab. I can't check ink levels, align the pages or check on maintenance. When I click on the folder of the printer it opens but it says it's searching for items. The printer of action file is not there. Anyone know what could cause this? I can't open the Toolbox of the product. What I have to reinstall the printer software, or is there something else I can do to fix this. I have windows 7 and a 3000 deskjet printer. Thank you.

  Harold R. Rodgard

  Hello Harold,.

  The question most likley do not have much to do with the replacement of the ink cartridge.

  Lately, HP has released a new software, due to the latest MS updates, you must update the software to get all the features.

  Go to start > programs > HP > select your printer folder and follow uninstall them.

  Now, download and install the new version of the software from here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=DJ-109022-2&cc=us&DLC=en&LC=en&OS=4062&product=4066429&sw_lang=

  Shlomi

• Bluetooth driver after installing new hard drive

  Hello:

  RE: HP Pavilion DV7 - 4270us Windows 7 64-bit

  Two weeks ago, I replaced the internal hard disk on the above referenced pc. I added slowly back the necessary drivers and software using a large HP Expert.

  (Note: I have create recovery discs when the pc was new, but for some reason, they would not install new hard disk.) This is the reason why I'm adding drivers and software available, one at a time.)

  3 questions please:

  (1) because my pc's bluetooth, I don't remember adding a bluetooth driver. How could I know?

  (2) Lightscribe software has been installed at the factory on my pc, but I have not just now. Is it possible to get that back?

  (3) reviewed the upgrade from Windows 7 to Windows 8.1, but was afraid that I wouldn't be able to find the drivers for my pc if I have upgraded. In addition, read on the forum, it seems to be quite a number of issues upgrading from Windows 7 to Windows 8. 1. What are your thoughts?

  Thank you for your help and suggestions.

  For the Bluetooth drivers:

  If you need drivers, follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

  Here is the link to the lightscribe software:

  http://download.LightScribe.com/LS/LS_Update_1.18.27.10_.exe

  Regarding Windows 8.1:

  If you are running Windows 7, you can use Windows 8.1 Upgrade Assistant to check if your programs and devices are compatible with Windows 8.1.

• RESOLVED: Loop of reboot after installing new disks in RAID of PERC S100

  A customer has a Dell T110 (with a PERC S100 RAID controller) running Windows 2008 R2. The system has two disks: a reader not RAID (C :) running the operating system and a RAID1 drive (E :) sharing data with network folders.) We need to install again, larger disks for the RAID.

  I thought I could backup the data on the RAID drive existing (e), install new disks, built a new table in the S100 (VDM) virtual disk boot manager, boot into the operating system, create the new partition for the data replaced E: drive and copy the data back. This was not the case. After installing the new disks and the new array of construction (which is reported as "READY (R/W)" when starting, Windows starts all the way in "press CTRL-ALT-DEL to log". After two or three seconds, the system reboots. The same thing happens when I try to start safe mode. The system IS NOT automatically booted to the Recovery Console. He never seems to know that an error occurred and the system was not shut down normally.

  I booted into the Recovery Console, installed the drivers for the PERC S100 and run recovery to start without success. Also in the Recovery Console, I ran 'chkdsk /f E:\. ' (remarkably, the drive letter for the data drive remained the same), and no error has been reported. I also reinstalled drivers S100 of the recovery using DISM Console, but that changed nothing.

  I started to 8.1 Windows PE, installed drivers S100, formatted the virtual disk, copied the data which he, and everything works fine. The only problem is when I try to boot from the system drive (which has no problem) with the new installed disks.

  When I put the old records, the system boots normally with no reconfiguration required. The VDM to start automatically remembers the discs and the table. Nothing shows up in the logs event indicating that there was an error during startup. (Ntbtlog.txt) start-up newspaper, after several boots with the new drives in place, indicates that the system restarts at various times during loading drivers. There is nothing coherent in the startup log to indicate what the problem is.

  The only clue I have is that, during the startup, the VDM reports the virtual drive of origin as 'NORMAL (R/W)' and the new virtual disk as "READY (R/W)", but I'm not sure of the significance of this difference or if it suggests a solution.

  I can't find clues in all the newspapers about what may be the problem. If anyone has any suggestions, I will be grateful. I'll be especially grateful for the wacky suggestions.

  I ran it. Nothing appeared unusual. However, I does not solve the problem.

  I connect the new readers to the same SATA ports as the old records. When I connect one of them to the SATA port that had not been used as part of the original painting, the VDM S100 reported the original failed array, because readers were is more connected and showed the new table as a LOAN. The operating system then started normally.

  The trick, it seems that you should remove the old virtual disk before connecting the new disks on the same ports.