Delay after connection - WXP & M200

Similar Questions

• delay after typing my password with the message: "preparing your desktop" displayed on the login screen

  I use Windows Vista for about 3 years now, it has been hurt on the first day.  However, it is the biggest problem I've ever known.

  My PC is currently the entire installation, which means that all the software, drivers and personal settings are applied to the way I would like it. But lately, I have had opportunities indicate that loggin, there was a long delay, after typing my password with the message: "preparing your desktop" displayed on the login screen (the PC was night shotdown, not having changed anything to the system), then I am connected to a desktop where I lost all my custom settings : wallpapers, plans, location of the updated table on the page icon, were all gone as if I start Windows for the first time, and every program I tried to run from there thought while they started upward for the first time.

  My office, I know, has completely disappeared.   How can I get it back?  Where at - it go?

  I am a school teacher and my student missions, etc. are in the files on the desktop.

  I'd appreciate any help you can give me.

  Please keep in mind that I'm not a techno person and very little familiar with several computer attributes.

  Thank you

  Press Alt + Ctrl + delete

  Start the Task Manager

  Click new task below or click file > new task

  Type explorer.exe

  Click ok

  Bring this back?

• Time Capsule A1355 no light, no sound? worked this morning now after connecting it, first go-ahead for colid quickly followed by the longest fixed Orange, which turns off and then nothing? He's dead now?

  Time Capsule A1355 no light, no sound? worked this morning now after connecting it, first green light solid, quickly followed by amber is more solid, which turns off and then nothing? I'm not in the airport or if directly connected to the Macbook air utility. It is running the latest firmware, updated 7 days ago and everything was fine until now. Tried both a soft and a hard reset factory but still nothing, but the same brief glow only after restarting each time before going dark again? Any ideas if it can be fixed or if it's as I read elsewhere dead now?

  Thank you

  Any ideas if it can be fixed or if it's as I read elsewhere dead now?

  He died... the fact that the main witness turns off is unusual in this model.

  It is common to the next... A1409 (gen4)

  What happens in the Gen3 is normally a few deaths on the Board... or a bunch of capacitors is low...

  See s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

  If yours is a very fine introduces Gen3 just before Gen 4, it is possible that the same fix on the Gen 4 could work.

  s/Apple-time-capsule-repair/GEN4-a1409-issues https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

  I found early Gen4 may fail as Gen3 but must admit that I am yet to see the Gen3 with welding problems.

  I doubt repair is worth it. The Gen3 is now about 6 years... give or take... This is way beyond the standard lifetime of a TC.

  If you want to play, I'm happy to help you... but I would not spend money on it.

• Satellite A100 PSAA2E Setup hangs after connecting new HARD drive

  Hello

  I have a problem with TOSHIBA Satellite A100 PSAA2E (3 year old laptop)
  I bought the new SAMSUNG SPINPOINT 250 GB SATA (model HM250JI) hard drive.

  After connection, the computer hangs on the first screen. I can't access the BIOS Setup (press F2)
  I can't boot the CD of form (I can't select same drive to start by pressing F12)

  It just hangs.

  When the HARD drive is unplugged I can access the configuration of the BIOS or boot from CD. When the original hard drive (FUJITSU 40BG) is connected, everything is ok.

  I updated the BIOS to version 1.5 to the a more recent 2.6, but it did not help.

  HARD drive runs under windows xp, when connected by USB port. It is formatted with NTFS: a primary partition(15GB), a stretch with two logical partitions (20BG, GB 215).

  You have no idea where could be the problem?
  Should I format hard drive in a different way?

  BR,

  hosss

  Hello

  Check if your new HARD drive has been fitted with a small jumper that controls the master/slave/c-salt settings.

  A friend of mine bought a new HARD drive and BIOS didn't recognize because the rider has been set to the wrong position.

  Good bye

• computer disconnects immediately after connecting

  my computer disconnects immediately after connecting. He did also thisin safe mode, no idea how fix

  Reconnect to your Windows XP work.
  Go to Start -> Run -> type regedit ->OK -> Regedit should start.
  On the left side, click on HKEY_LOCAL_MACHINE
  In the Menu , go to file -> load the hive
  Find the file C:\Windows\System32\Config\Software -> clickOpen
  Type a key TEST name-> click OK
  Now, on the left, go to the HKEY_LOCAL_MACHINE\TEST\Microsoft\Windows NT\CurrentVersion\Winlogon
  Once you have clicked on Winlogon, values will appear on the right side.
  Search
  Shell    REG_SZ Explorer.exe
  UIHost    REG_EXPAND_SZ logonui.exe
  USERINIT    REG_SZ be C:\Windows\System32\userinit.exe (preferred) OR just userinit.exe
  If the data are not the same then double click on the registry value (Shell, Userinit, UIHost)
  a screen opens where you can insert the data from the correct value.
  Once all 3 of these registry values are the same as above, then on the left side once more go up and click on
  HKEY_LOCAL_MACHINE\TEST
  Then in the menu, click on file -> unload the hive -> clickYES to confirm the unloading of the TEST hive.
  Quit Regedit, restart the PC and try again.
  If you are unsure of any of the procedures above, please let us know.

• Delay after domain join

  Dear Microsoft team,

  We have six identical touchscreen PC ("sword of the FEC") "Windows POSReady 2009". This problem affects all of them, while this does not happen on another of our clients in the domain (XP and 7).
  The domain controller is running "Windows Server 2011 64-bit" "VMWare ESXi 5" with a single field.»
  Before joining the domain, clients asked me to wait while the 'domain' list is being created. This process took about four full minutes.
  Because customers are now reunited to form the area, they 'autologon' using a domain account and start our application of sales...
  The boot process is delayed nearly three full minutes then the PC does nothing... until the startsound of Windows is playing.
  It does not have software or drivers on the affected machines.
  This is my diagnosis up to now:
  • LMHOSTS: creating an lmhosts file has not resolved the problem (KB314108).
  • DHCP: Configuring a static IP address does not resolve the problem.
  • Services: startup time is down to two minutes when the 'TCP/IP NetBIOS assistance' is disabled. However, he breaks the updates of group policy at startup ("the network path is not found"). Manually run "gpupdate" is always present.
  • NMCAP: Attached are four screenshots of MS NMCAP. The PC has been powered at exactly 21:43:45, received his lease DHCP-47 seconds later, but did not respond to ping from 02:50 minutes after the power! You can see the last ping unanswered in "cap1.jpg" on the top and the first ping responded in 'cap4.jpg '. You may find solution inbetween. There are a few "Bad Checksum" - messages. This log file NMCAP begins at 2:40 Minutes after the ignition and is 22 MB.
  • XBOOTMGR: Attached are four screenshots of a "boot trace. The Analyzer said he got a "reversal of time. Could be the solution to our start delay? Track does not belong to the same machine as NMCAP. The ETL file is 141 MB.

  Thank you very much in advance for your help!
  
  
  Kind regards
  Gibisch W.
  • (Removed screenshots. Problem solved.)

  The solution:

  http://social.technet.Microsoft.com/forums/en-us/26cc9c7b-318F-4BE0-9f44-4ffbc2cc0e44/XP-startup-delay-after-joining-domain

• XP hangs after connecting an external hard drive via USB port

  When I connect an external hard drive of 250GB via a USB port on my system XP - SP3, the computer crashes immediately after the sound signal from the recognition of a normal connection PnP. There is no assignment of the station. I don't know that he had worked as can be expected before. A new 500 GB external hard drive is recognized as new hardware, the driver installed and ready to use, but after that, the PC shuts down completely new. However, when I do a system startup after connection of the same two drives, everything looks OK. Also, no problem with a USB stick of 2 GB. How to find what's the problem?

  Well - it's Windows for you, sometimes. :/

  Good luck with your new installation!

• Why after connect to my router it take 1-2 minutes to load the router's Web site? No software and the hardware has changed.

  Why after connect to my router it take 1-2 minutes to load the router's Web site? No software and the hardware has changed.

  Hello

  I suggest you check out the link to Linksys support:

  http://homesupport.Cisco.com/en-us/support

• How can I change regional settings after connection Wi - Fi was made on my xbox 360

  How can I change the locale of my xbox 360 after connection Wi - Fi has been made

  Hello

  You can check the link:

  How to set up your Xbox 360 console locale

  http://support.Microsoft.com/kb/906497

  Note You can't change your regional settings, if you have enabled the family settings feature. The language setting is integrated with the family settings feature and wireless network settings. Change the regional settings can change the wireless network settings. We recommend that you do not change the regional settings after you set up your wireless network.

  If you encounter problems after you change the regional settings, you can contact your ISP for assistance.

  Hope the information is useful.

• How to read the WebGate Agent user information after connected?

  Hi all

  I'm new to IOM and here's what they have so far

  1. the installer OUD with OAM

  2. setting up OSH/Wegate connection to OAM for SSO

  3. Configuring Weblogic server frontended by a setting of OSH in #2 and I am able to connect to the application by using OAM SSO.  However, I still have questions, read the information of the user (such as user id, name, email) after connected since

  WebGate and couldn't find the instructions so far.  Can you please give me some information on how to do this?

  Thank you

  Binh.

  Please mark discussions as replied if the response has answered your question.

• Ago 10-15 second delay after you have clicked on a link from any application Windows 8 Metro... before opening the web browser.

  Title explains the problem: ago 10-15 second delay after clicking on a link from any application Windows 8 Metro... before opening the web browser.

  Any browser (IE, Chrome, etc.). Any application as long as it's a subway app (mail, etc.). If I click on a link to a Web page from any metro Windows 8 app it is 10-15 second delay before its opening.
  I tried to repair Windows, disable Windows defender, and a bunch of other things and nothing is set.
  Anyone have any ideas?
  Thank you!

  Hello

  Try to manually configure the DNS servers in the network card settings (guide: http://www.plus.net/support/software/dns/changing-dns-windows-8.shtml).
  It fixed the problem for me.
  Apparently it has something to do with the reuter incorrectly redirect DNS queries (I use D-Link).

• Adobe products cc show trial yet even after connecting with a subscription account

  Everytime I open adobe photoshop or adobe first pro cc cc, he asks me to log in, after connection it said no subscription found where I connected with an account with subscription. Also it asks me to enter the serial number for adobe photoshop cc/adobe first pro cc. Please help as a matter of urgency

  Thank you

  Ask the serial number http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html

• State of session always invalid after connection

  Hello community,
  I have a functional connection process that uses my connection with username and password. After connection I branch to start the application page, but now, this session is different from the connection start session, so each connection is invalid and will be branch to the authentication of invalid schema page.
  
  My login is url: f? p = 100:100:123456
  
  Once the connection is correct (I tested in the database with a large number of inserts into tmp_table)
  I want to the branch with the wwv_flow_custom_auth_std.login () of page 1000 standard connection procedure.
  
  The correct url is displayed in the browser, but the current page is the page of connection 100, because the session (I think) is not valid. In the authentication topic, invalid session page is set to page 100.
  I tested several pages and still this page is branched.
  So im shure, that session state is not always valid after login.
  
  But why?
  
  Someone at - it an idea?
  
  Thank you for responding.
  
  Frank

  For what it's worth, dbms_obfuscation_toolkit has been deprecated when 10.1 is out. dbms_crypto is the package supported in the future.

  Tyler Muth
  http://tylermuth.WordPress.com
  [Oracle security application: development of secure database and Middleware environments | http://www.amazon.com/gp/product/0071613706?ie=UTF8&tag=tylsblo-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=0071613706]

• Portege M200: No COM-port after connection Replicator 3 +.

  Hello
  I am not on Device Manager com ports when I connect the port replicator 3 +.

  My external device does not see the com ports too.
  Do I have to install a special driver?

  Hello

  do you com availaable ports before you joined the Portreplicator 3 +?

  If I remember correctly, the M200 is free inheritance, which means that no ISA bus is built in.
  The serial port is normally connected to the ISA bus.

  BR

  Tom

• delay after each image record

  Hello

  Can someone help me please about an issue I'm facing. Basically, I managed to save five images in a directory, I now want to do is to save each image after a specific time period without interrupting the entire program. I tried to do this with the time elapsed time vi (under the calendar), but do not have to work. I know that it is possible using this vi. I think I have what I do is not the right way. Attached is a screenshot and the vi I haaving problems.

  Is that what you want? When you click on the button 'Save 5 images' type of lock, the VI is expected to produce 5 images, with a 3 second delay between them.

  Edit: this VI will also wait 3 seconds before you save the first file, if you want the first file to be created when the button is clicked, you must change the VI a little, so you can practice a little more

  Edit2: important to stress, that you didn't have any time in your loop to slow it down. If you run these timing loop, your computer tries to run it as soon as possible. This is not a good practice. So I put a wait 50 MS in the loop to be ok with this...

  Edit3: I also forgot to connect the cable to your digital indicator "picture #". You can put in the required place and connect the entire meter wire.