Delay in keyboard IMAC 5 K

Similar Questions

• keyboard iMac repeating letters after waking from sleep

  The wireless on my 1 year old iMac keyboard do not like to wake up! When I try to type a password, it supports just repeatedly touches, nothing can stop him except a reboot.  There seems to be no key stuck or anything, the keyboard has never been damaged in any way.  It happened awhile :-(

  Ideas or suggestions appreciated!

  Reset the NVRAM/PRAM memory.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "on Mac Laptops with non-removable battery.

  https://support.Apple.com/en-us/HT201295

  Boot mode safe. http://support.Apple.com/kb/PH18760

• Repeat and delay in keyboard

  Hello

  is it possible to speed up keyboard delay and repeat?

  I have already put in faster in XP, but my Toshiba P10-792 with XP - SP2 has a much slower than my PC keyboard regularly. I couldn't find a setting in the BIOS for this.

  I just bought this laptop, it is very good except for the slow keyboard.

  Thank you

  Peter Manders
  the Netherlands

  Hi Peter,.

  do you have you tried to update the bios, maybe a newer version is available!

  As much as I know there not the possibility to "speed up" the keyboard.

  Sorry!

  Antoni

• Delay of keyboard on Windows XP

  Hello
  I an A80-131 and after installing Windows XP - SP2, I found that I have a delay of a few seconds after I hit the keys because they will be displayed on the screen. Also during this second computer cannot click on anything whatsoever.

  I thing this is a problem with the drivers, but I have not found the driver. Can you help me? Thank you

  Hello

  Please check the keyboard settings in the control panel for setting 'filter keys. If checked, this can have the effect described in makes the strikes delayed on-screen. Parameters are normally under the tab "accessibility".

  HTH

• Satellite M105-S1021 - delay of keyboard problem

  My keyboard does not work right. Just typing this is atrocious. When I press a button, I have to hold it down for a good three seconds until the letter is displayed. I tried to reboot several times, I've defragmented, I checked my keyboard settings in the Control Panel, I uninstalled the only program that I installed in the last month or more - this following Asian thing so I can display Japanese characters on my computer - no luck.

  I really don't want to have to buy a new keyboard or laptop. My laptop is only a little less than two years.

  Any help would be greatly appreciated. Basically, I have my laptop for writing.

  Can you get somewhere external keyboard and test how it works? It will be interesting to see if the problem persists.

  The fact is that you use the keyboard very intensely and perhaps that the contacts are not so good more.

• How do you do dictation works when you have a computer keyboard, and imac of microsoft

  How activate you the microphone to a computer with a Microsoft keyboard iMac?

  Instructions for Apple to use dictation you use your voice to enter text on your Mac - Apple Support. You must find what Microsoft used as the FN key may need to contact MS to support on their product.

• Satellite L505-13n delay keyboard - lag in claire win7 installation prob

  Hello.

  I have a laptop Toshiba Satellite L505-13n I buy a week before and I clearly install windows 7 ultimate 64 bit Greek with all drivers 64-bit for this laptop that I find in the toshiba site.

  I have delays major keyboard when I press a letter, this letter, start typing itself many times it stops for 1-2 seconds and continue typing.
  This is the problem because under conditions normal conditions this letter and each letter or text go he must be entered WITHOUT ANY BREAK.

  I check the hard drive, and has no problem.

  I try to run LiveCD:
  1 Ubuntu and other linux editions
  2. Windows xp
  3. Windows vista

  and to clear formatted the hard drive try to install:
  1. Windows 7 64 bit
  2. Windows xp Greek sp3

  The problem remains.

  Please tell me what to do and I can try to solve this MAJOR problem for me.

  THANK YOU FOR YOUR TIME AND YOUR ANSWERS.

  Retest with original Toshiba recovery image. With the settings everything should work well. If this is not the case, there must be a hardware problem.
  You can try with the BIOS update, but in my opinion, it is not best idea.

  Laptop is new and everything should work again.
  Test it with the original recovery image without having to install the updates or other software, just clean recovery image. If the problem persists, contact the nearest Toshiba service provider to check the functionality of the keyboard.

  What else can you do?

• on board the keyboard beep with each character pushed and be maintained for 3 seconds to type each letter

  Help, please. This is beyond frustrating. each key will beep when they are affected, but if I touch it will type. Please help with ideas.

  Hi jerry dorchester.

  If the computer will beep while you type, key levers or sticky keys are active. The ToggleKeys can emit a beep when you press the lock keys. The function StickyKeys can emit a beep when you press the CTRL, Alt, shift, and locking. Use the following steps to disable the ToggleKeys:

  1. click on Start, and then type ease in the search field.
  2. Select from the list the easy access programs.
  3. scroll and select make the keyboard easier to use.
  4. If selected, remove the selection to turn on sticky keys.
  5. click on Configure keys to sticky.
  6 remove the selection to activate StickyKeys by pressing SHIFT five times.
  7. click on Save.
  8 remove the selection to activate the ToggleKeys.
  9. If selected, remove the selection to activate the ToggleKeys in now key Numlock for 5 seconds.
  10. click on Save.

  Check if it works.

  For the keyboard typing slowing down everything by typing you need reduce the time between the characters pressed.

  To change the delay before keyboard characters repeat

  1. open the keyboard by clicking the Start button, clicking on Control Panel, hardware and sound, tap keyboard.

  2 by the repetition of the characters, move the repeat delay slider to the left to increase the amount of time that you must press and hold before the keyboard character repeats. Move the slider to the right to decrease the amount of time before repeating characters.

  Change keyboard settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-keyboard-settings

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Key combination does not respond before the start

  Hello. I have a macbook pro 13 "2015 retina.

  The problem I have is the same as the title, but it's not regular "choose the appropriate settings startup disk' because I tried already several times.

  Mind you, none of these problems remain once Mac OS startup has finished, it is just the period prior to initialization.

  Here is the list of problems.

  1. There is a very long period of black screen (backlight on) between the startup sound and the apple logo appears on the screen.

  2. start after key combinations take a long time to register. For example, 'boot disk selection window' takes more than 2 minutes of waiting. I have to wait while pressing the option key. It also applies to enter recovery, reset pram, entering the diagnosis, enter safe mode, etc..

  3. once I finally get a function running, there is a delay of keyboard/trackpad. Interactions appear unusably slow on Boot Disk selector and Internet Recovery(wifi selection). Trackpad responds a minute after I hit, it is the keyboard.

  4. There is no wifi signal on Internet recovery for about three minutes (my hotspot is 5 cm behind my mac).

  To sum up, it feels like the processor is clocked at 5 Mhz or something.

  Here is a list of what I tried.

  1 reset the smc, pram

  2 reinstalling Mac OS

  3 internal SSD flash disk formatting and installing Mac OS

  4. remove the boot camp

  5. remove the magsafe

  6 safe mode (no matter, because I do not think it is related to Mac OS anyway)

  I have no external devices or readers, all that is present is the magsafe.

  I always have Apple Care has left, so feel free to tell me if you think it's a hardware problem. Thank you for reading, and I appreciate your help.

  Please make an appointment at the Apple Store - Genius Bar store and bring it into service. If you are in the United States or is unable to make an appointment in this way, contact your Apple store.

• Please update lenovo... Firmware...

  Lenovo is really a trustworthy brand... So, in order to get the full customer support... And give a complete customer satisfaction... Needs of Lenovo to take care of already released and sold phones... wishing them luck with o also release more... Because a an organizational behaviorist... I can tell clients... When buying a new item to try to find loopholes. Instead of background when comparing with other products...
  Now, I would like to give some suggestions.
  Please... Make UI lighter in the next update... As to free more ram... Please focus on... question of heating... Battery... However, your products are very good... Also try to incorporate some... Virtual reality app to... Next update for lenovo k3 notes

  Please keep in mind please. To rectify the problem of delay of keyboard in this note K3

• Clients of remote desktop in Windows XP Professional

  Hello - the situation I describe is very strange and somewhat reproducible in my environment. Really I am looking for the elements to look and see if anyone else has experienced this problem.

  When you are in a session of the Bureau (specification of environment at the end of this post) and you start the desktop connection program remote (Version 6.1.7600 RDP 7.0) you connect to a server using RDP. In our environment, the servers are Server 2003 or 2008. If you do not have capital letters or special characters (! @# $% ^ & *) your password so this issue does not affect you. However if you do not have capital letters and/or symbols then this problem usually affects you. What happens is that you type your password as usual, but it will not let you on the server - it will show you your password or user name is incorrect. If you type really slowly, now the SHIFT key for longer than 1 second before hitting the combination key, then it will normally leave you.

  It feels almost as if there is a delay of keyboard with the SHIFT key, but only in the RDP program window. If you type your password in Notepad then it turn out very well. Also, once you are on the remote server, there is no keyboard lag. In fact you don't see any shift of the keyboard when you type the password in the password box, but you cannot verify that the characters are accurate because of the mask of password.

  I never noticed this problem before because my passwords were still tiny with numbers. A new user in our environment is one that for the first time the question because his password has the symbol @.

  Any ideas?

  Environment: View 4.01 with Windows XP Professional x 86 infrastructure related clones. Not persistent.

  Thank you

  Richard

  If you are connected with PCOIP?   If this KB on the shift to the right in order to check key does not not via RDP connected through PCOIP

  http://KB.VMware.com/kb/1018654

• Problem of PICTURE PROCESSOR typing changes

  With CS5 IMAGE PROCESSOR, both snow leopard and lion: I'm trying to implement a batch resizing script: after you have selected both files, check "resize to fit", "Save as jpeg", I can't type in any new parameters of quality or W px. Keyboard produces sounds of error on every shot. What did I miss?

  The keyboard, iMac 21 "OS x 10.6.8

• I cannot connect to my iMac and have keyboard problems.

  I got my Imac since 2009.  Currently, I have the installed El Capitan OS but I still have the original

  Drive on OS X that comes with it.  I'm the only person who uses it to my account is the only one on this subject.  I have installation log on password for security protection.  Today when I tried to log on it would not accept my password.  I tried to enter several times and it wouldn't work.  I tried to reset my password via the master password, but I could not remember what is my master password.  Then I rebooted and went into recovery mode.  However, when I tried to type resetpassword in the box Terminal, my keyboard would not type the correct letters.  I would like to start typing and rese appears on the screen, but no "t" and the word would always come wiord or some other drift upward.  I tried to type several times watching my keyboard to ensure I was hitting the right keys and still nothing worked.  I don't know whether it was a problem of keyboard or if my Imac is infected.  I would be very happy and support - could someone give me

  It's more; y as a KB problem, but have you tried at that time to unplug the KB & reconnect it?

• Share the iMac screen and keyboard with Mini?

  If I have a Mac Mini, can he share the screen and the keyboard of my iMac (27-inch, 3.4 GHz with OS X 10.11.6 end 2012)?  Or I need additional hardware on my desk?

  Bluetooth keyboard/mouse with two Macs sharing

  February 2016 https://discussions.apple.com/message/29761388#29761388 - "whether or not you can use your old iMac as secondary screen for your new iMac (known as the target Display Mode) will depend on the model."

  Use your iMac as a display with the target - Apple-Support - https://support.apple.com/HT204592 Display Mode

  I'm guessing that you are going to reach the point where you click on a button and the keyboard and display switch between a computer and the other simply.

• IMac, by default, the keyboard

  I use an APPLE Wired Digital keyboard, when I press the key "a" I am me "az", even for the 'q' = 'qs' and 'w' = 'xw', 't' and 'y' (even in the capital) lost. I check again with the new keyboard with the same problem. I checked keyboard settings.

  I launched "Applejack", active disk and permissions (no problem).

  My iMac seems OK, but the only problem with keyboard?

  Reset the SMC 2 or 3 times, if the problem persists after reset then try another USB keyboard and test. If the problem disappeared with the 2nd keyboard then you know the original is defective and must be replaced. Keyboards can and wear out or can be damaged because of the abuse of the owner.