Delay of link XBOX360

Similar Questions

• delay 10s ~ when clicking on links before loading starts

  I have a delay of 10 seconds after clicking on links before loading starts. On some sites, it's worse than on others, the worst being on reddit.com. I tried to reset firefox but that did not help. Thanks in advance for any help.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables some settings and disables most Add-ons (extensions and themes).

  (If you are using an additional theme, place you in default theme.)

  If Firefox is open, you can restart in Mode without failure of Firefox in the Help menu by clicking on the restart with the disabled... modules menu item:

  

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

  Thank you.

• Delay clicking on links

  It's on a Windows domain, but that only one workstation is having this problem. There is a delay of 10 seconds when you click on a link to a Google search in Internet Explorer 8. Or any engine of research Yahoo, Bing, etc..

  If they go to a Web site and click on a link in this Web site, its very good. Its only when you click on a link from a result of the research. The screen turns off for about 5-10 seconds and then goes to the site you clicked on.

  I tried everything short of reloading the system to solve this problem. Checked against virus and spyware using various programs. I have factory reset. I checked the hosts file and DNS settings. I tried using DHCP and static IP. I connected with the domain administrator account. I tried to use FireFox and Chrome. It doesn't matter what she always does the same thing.

  Think only I have not tried to reload IE 8, but then I don't know why the same thing would happen in Firefox and Chrome.

  Help!

  Edit: do not know how he got in the Vista forum, but it's on a XP machine. Don't know if a Mod can move it there.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  As you say, these are Forums of Vista.

  See you soon

  Mick Murphy - Microsoft partner

• Ago 10-15 second delay after you have clicked on a link from any application Windows 8 Metro... before opening the web browser.

  Title explains the problem: ago 10-15 second delay after clicking on a link from any application Windows 8 Metro... before opening the web browser.

  Any browser (IE, Chrome, etc.). Any application as long as it's a subway app (mail, etc.). If I click on a link to a Web page from any metro Windows 8 app it is 10-15 second delay before its opening.
  I tried to repair Windows, disable Windows defender, and a bunch of other things and nothing is set.
  Anyone have any ideas?
  Thank you!

  Hello

  Try to manually configure the DNS servers in the network card settings (guide: http://www.plus.net/support/software/dns/changing-dns-windows-8.shtml).
  It fixed the problem for me.
  Apparently it has something to do with the reuter incorrectly redirect DNS queries (I use D-Link).

• Delay link script

  From here.  I'm not sure how to adapt this to my page. He does not what parameters are placeholders and syntax.
  
  
  
  
  
  <!-TWO STEPS TO INSTALL a LINK DELAY IMAGE:

  1. copy the code in the HEAD of your HTML document
  2. Add the last code in the BODY of your HTML document->

  <!-STEP 1: paste this code in the HEAD of your HTML document->

  < HEAD >

  < SCRIPT LANGUAGE = "JavaScript" >

  <!-this script and many more are available free online to->
  <!-the JavaScript Source! http://JavaScript.Internet.com -->

  <!-begin
  page of the var;

  cool var = new Image();
  Cool. SRC = 'users ';

  var link = new Image();
  Link.SRC = "link.gif;

  function redirect() {}
  Window.Location = page;
  }

  function gotoPage (image, photo, time, url) {}
  page = url;
  eval ("document ['" + image + "'] SRC =" + pic + "src ;");)
  Timer = setTimeout ('redirect () ', time);
  }
  -> End
  < /script >
  < / HEAD >

  <!-STEP 2: copy this code in the BODY of your HTML document.

  < BODY >

  < center >
  < img name = "image1" src = "blank.gif" width = 74 height = 30 > < a href = "javascript:gotoPage('image1',_'cool',_'5000',_'___http://www.yahoo.com___')" > see the Cool Page < /a > "
  < p >
  < img name = "image2" src = "blank.gif" width = 74 height = 30 > see < a href = "javascript:gotoPage('image2',_'link',_'5000',_'___http://www.yahoo.com___')" > link < /a > "
  < /Center >

  < p > < center >
  < police = "arial, helvetica" size = "-2" > free JavaScripts provided < br >
  " by < a href =" http://JavascriptSource.com "> JavaScript Source < /a > < / police > .
  < / center > < p >

  
  

  612wharfavenues wrote:

  Ive re-read your answer for more than an hour now, and nothing about this script makes no sense.

  This is the problem by relying on the copy / paste scripts. If you understand JavaScript, it is easy to adapt. But if you understand JavaScript, you would probably write it yourself first. Catch 22.

  What im trying to do is ensure that when the user clicks on an image, he made a break for x seconds, then go to the previous page [onclick = "history.go(-1); return false;"] »]. How can I do this?

  This makes it much easier to understand what you're trying to do.

  The JavaScript setTimeout() method accepts two arguments: the action you want executed and the number of milliseconds of delay. The first argument of setTimeout() must be either the name of a function (without the quotes) or the actual commands in quotes. Because the onClick event handler is wrapped in double-quotes, history.go(-1) must be wrapped in single quotes. The false statement is necessary to prevent the browser from trying to follow the link.

• Delay on a link Rollover

  I am very new to Dreamweaver CS5. I'm currently doing a site and I work on the properties of a link.

  I have the word 'Enter' link to the homepage of the site. I have the color change to a lighter color when the mouse over the word. However, this happens instantly. I wonder if there is a way for the lightest color to fade in the what you overview with the mouse instead of simply changing immedietely?

  Thank you very much!

  You can use a css transition...

  http://www.w3schools.com/CSS3/css3_transitions.asp

  It only works in CSS3 compatible browsers (all but IE9 and more).

• Error in link delay/reduction

  Hi all

  I had a problem of text or images moving and shrinking then never completing the front to the linked page.

  This looks similar to the mistake of recent link that someone just posted today.

  I look forward to the advice to solve the problem on the sidebar at http://www.jcgsmo.org .

  Thank you

  leaftech

  Whenever you change the font size or style in a link you ask for trouble. I will try this

  Change this

  a:link {     color: #009;}a:visited {     color: #F00;}a:hover {     color: #090;}a:active {     color: #630;     font-size: 10%;     font-style: italic;     font-weight: normal;     text-align: center;}
  

  For this

  a:link {     color: #009;}a:visited {     color: #F00;}a:hover {     color: #090;}a:active {     color: #630;
  
  }
  

  See what for you.

  Gary

• Follow-up of applications for security delays

  When you use the private mode on http://www.lensbest.de/ with activated protection of follow-up, most of the requests are delayed by 1 to 2 seconds. Loading animation is not present in this time interval. For example, the links in the menu and in the footer are affected by the problem.
  If I disable the protection followed in the address bar, the delay goes away.

  I found the problem in Firefox 42. Firefox to reset to the default values and creating a new profile didn't help.

  I can do something on the server to resolve this problem?

  h.Klaus said

  When you use the private mode on http://www.lensbest.de/ with activated protection of follow-up, most of the requests are delayed by 1 to 2 seconds. Loading animation is not present in this time interval. For example, the links in the menu and in the footer are affected by the problem.
  If I disable the protection followed in the address bar, the delay goes away.

  I found the problem in Firefox 42. Firefox to reset to the default values and creating a new profile didn't help.

  I can do something on the server to resolve this problem?

  Could be closed. The problem was caused by a Timeout of Google Tag Manager.

• Click for links does not work in firefox

  Hello

  Having a strange problem with firefox - simple click will not open links - always needs a double click (even one with a long delay between the first and second clicks) to navigate. This problem started a month ago. I have used firefox for years without encountering this problem.

  Apart from firefox (including Windows, IE...) this problem will not occur. Interestingly, the problem also does not occur in firefox toolbars, menus, etc. It seems that for the links...

  I'd really rather not reset firefox because it will be a good pain to recustomize settings lost etc.

  Any help appreciated

  For others who may be in the same boat: culprit has been found - Webroot filtering Extension (v1.0.2.42). I use Webroot as my antivirus and installed their firefox search engine 'screens' results link extension

  I think it's maybe a recent update to this extension, which is the issue that I think I've been using this extension for more time that I had the problem... In any case, problem resolved once off extension. It's a shame, as I've found most useful.

• Inactive links for quite awhile when opening pages

  Recently I faced a problem when all the page links are inactive for some time (from 10 to 20 sec) when opening/refreshing of web pages.
  Loading of the page its content, it can be the object of a scroll, flash works, but links can be used only with a certain delay.
  Include http://newsone.ua/ , www.censor.net.ua, http://www.bbccanada.com/, jerk
  The same thing happens to my family in another city.
  Tried to reinstall, reset profile, disable plugins, empty cache...
  What can be?

  Best regards, Alex

  Problem solved. There was a Trojan horse malware in the system. Everyone, thanks for looking in this

• Last update adds a new tab with social media links to the exsisting homepages. How can I stop this?

  When I open Firefox, my home pages (4) shall, after a slight delay, a new tab appears with links to social media and the new tab is active. I want to stop the new tab to open!

  Uh-oh, you may have installed a non official package containing the update. If your download history indicates the source, can report you here?

  Your "more system details' shows the extension MySearchDial. I recommend you to remove that from the addons page (if possible) or from the control panel.

  Either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click Extensions. Then find MySearchDial and remove (or at least turn it off).

  If necessary, open the Control Panel, uninstall a program, then click on "installed on" heading of the column to bring recent infections, uh, additions, upward.

  Hopefully he cleaning?

• The middle button does not open links in a new tab.

  If your only solution is to tell me:
  1 restart my computer
  2. start Firefox in safe mode
  3. use an another keyboard shortcut to open a new tab that isn't the central button of the mouse.

  Even bother replying. As I did the first two and it makes no difference and the 3rd option is a solution to everything.

  It's frustrating and I'm a little upset that after reading 20 + Pages of the same problem of 2011 that there are no answers.

  I'm on a new installation of Windows XP (yes I know old school) with firefox version 27.0.1.

  COR - El I made everyone everyone else offered on all of the other forums.

  I plugged my mouse on another computer and it worked fine. Then allows me to know its either something fishy with firefox or my computer.

  That I wrote that I discovered what my problem was. But I'm not sure why. I'll explain here in case someone else has a similar problem.

  If I Middle click on + hold click here for a solid second on the link, it will open a new tab.

  It just seems like there is a huge delay in my middle mouse click speed on this system.

  Either passing I'll discuss this further on my own. I appreciate all of your time.

• Where is the link to download 10.0.3?

  I need to download the latest version of 10.0.x and there is no download link on the homepage or on the FTP site. This release has been delayed?

  You are wanting to install Firefox 10.0.3 on another computer? Because the computer with that you posted this already running Firefox 10.0.3.

  You can download the Extended Support Release (exclusively for large organizations) to http://www.mozilla.org/en-US/firefox/organizations/all.html.

  Or, if you want the best and newest Firefox, you can download at www.getfirefox.com.

• Problems with LAN RJ45 Ethernet on Tecra A8 PTA83E link

  I experienced some problems with the onboard Intel PRO/1000 PL Ethernet adapter. The adapter in most cases works very well: it connects normally in 100 or 1000Mbps - full duplex - speed, depends on wich internetworking devices connected and the link has any problems.

  But, in some cases, with multiple Eth, the adapter devices involved the link at all, the Green LED on the right (link?) continually flashes with a delay of 2 seconds (0.5 "-1.5" wide) and the yellow on the left (traffic?) is always idle. On the other side of the Cat5e cable, the unit (now a Linksys WAG325N router) sign no link. There is NO cable problem.

  Windows (XP Pro, SP2) sometimes reports in the small icon of the LAN adapter on the traybar a driver connection established at different speeds (often 100 Mbit/s, but sometimes 1000Mbps!), but soon he returned to status "cable disconnected".

  I tried to upgrade the drivers directly from the pages of Support Intel because the support of Toshiba does not recognize my laptop (!), and because originally I did a downgrade to XP (I'm sorry, but I don't want to use the original MS Vista!), but nothing changes.

  The only way to establish a connection that I found is to manually reduce the speed (10 Mbps - full duplex) of XP driver advanced settings link. In this case, everything works, but a low speed.

  Can someone help me? Someone already noticed this problem?
  Thank you!
  Paolo

  Hello

  I m not very good if it isn't a cable delivers.
  Have you tried to connect the two devices using a crossover cable (cross cable)

  There are three different types of crosscable:
  -100BASE-TX-Ethernet 10BASE-T-und
  -100BASE-T4-Ethernet
  -Ethernet 1000BASE-T

  The difference is the use of pairs of crossed wires.

  However, the use of crossed cables is not necessary if you connect a router or switch device.
  But in case you want to connect two laptops, the crossover cable is required.

• Airport Extreme delay in navigation

  Hello community,

  Need your help to solve this problem, went recently with a brand new Apple Airport Extreme, I have comcast as my ISP, I own my own a modem surfboard 6183 I have the service of the explosion. I'm running a brand new late 2015 5 k iMac. I had a router Netgear before this one and when I went on the navigation pages, everything was quick and fast, now that I have Airport Extreme, I noticed that it is not as fast as it was before and it feels like a slight delay when you go to the pages, is still not happen but its 'there' If you know what I mean. Someone at - it suggestions? I use Safari as my browser. Happy to add more info if needed.

  There are problems known between all modems of the sb series and airports... especially the AC series...

  The problem is not related to either be defective... they don't like each other.

  My recommendation is to replace the Modem... the Zoom works much better... However, I must warn you... It is not the panacea for all ills.

  Zoom modem.

  https://discussions.Apple.com/thread/7360161

  https://discussions.Apple.com/thread/7427491

  Or to replace the AE as the main router... you can always keep it to wireless and even part of the DHCP server... but not the main router. A cheap substitute may well work... since it does not need wireless... I recommend one of the TP-Link for example WR1043ND v2 or v3, which costs only $50.