Delay of touchpad after typing Windows 10 on Flex-2

Similar Questions

• Officejet OfficeJet Pro 8600 Plus: Pro 8600 more will not scan from touchpad after updating Windows 10

  After a Windows 10 update, my printer will not touchpad analyze. It will scan the troubleshooting utility. I unplugged and reset without success. I have updated to the latest version of the HP software for the printer. What else can I try?

  Hello

  You can try to install from the link here:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8600-plus-e-all-in-one-printer-series-N911/4322915/model/4323647

  Before installing the HP software above, please uninstall your previous version first.

  During installation, select the type of standard or recommended installation when you are prompted by the installation software. If you choose a minimum installation, read the description of each component software with caution to avoid the unintentional loss of functionality of the printer.

  You can check via "Control Panel" > "Hardware and sound"-> "Devices and printers"-> under "printers and faxes". There will be a green check mark is marked to your printer if it connected successfully.

  Hope this helps you.

• Stream laptop HP 13: can't move with touchpad after installed windows 10

  I can't use my touchpad to drag (or move a window or a window size) after the installation of Windows 10

  I have looked for updates, updated my setup and the problem is solved

  

• HP Pavilion: activate the touchpad while typeing windows 8.

  Hi I have a Hp pavilion and I noticed that when I type my touchpad turns off... I heard one solution is to disable the check of palm, but I can't find this option. What is no idea what to do now please help!

  Hello

  SmartSense is almost identical to Palm check, so turn off should allow you to use the keyboard and the touchpad at the same time - just click on the "gear" beside SmartSense, adjust the slider to turn it off, click close and then click on apply to save the change.

  Another parameter in Windows 8/8.1 you can also check is as follows.

  In the bar of charms, click setting and select change PC settings.

  PCs and devices, and select mouse and touchpad.

  Under the touchpad, select "no delay (always enabled) in the menu dropdown.

  Kind regards

  DP - K

• Satellite A300-1EG: problem with the touchpad after installing Windows 7

  Hello!

  I had a problem with my touchpad since I installed Windows 7 (64-bit version) on my laptop (Toshiba) A300-1EG.

  I tried many different solutions to this problem.
  I checked the alignment of the touchpad (be it on) in the BIOS, I tried to install several drivers (on a site of Synaptics, automatically by Windows) and none of these work. Of course, I tried FN + F9 key combination.
  When I check the alignment of the touchpad in the Control Panel, everything seems fine. It is written, that "device working properly.

  I have Toshiba Software, what may be the cause of the problem?
  But I have no idea where I can find something.

  I'd appreciate any help.

  I hope to be understandable - English is not my mother tongue :) Thank you very much in advance for any ideas. :)

  Hi mate

  I'm not quite sure what problem you have but you should first try to install the necessary drivers touchpad m.
  Maybe you used the wrong driver in the past

  So Sat A300-1EG belongs to the series of PSAG4E.
  The European driver Toshiba page does not provide a special touchpad driver for Win 7 for this device.

  But I noticed that Win 7 64 bit drivers touchpad (Alps & Synaptics) for Satellite L500 PSLS3E series is released on the European driver page.
  Try both drivers Touch Pad for this device and test it!

  Welcome them

• Laptop HP Pavilion G6: mouse pointer delay after upgrade Windows 10

  I installed Windows 7 to Windows 10. So far, the only glitch is with the mouse. After that I typed, the arrow of the mouse does not move during 3 seconds. I have:

  Looked to reinstall the driver. He said that it is up-to-date.

  Properties of the mouse adjusted to zero delay (from average delay) on pointer after typing.

  Both of the above should have potentially fixed, but as it won't let me update the driver, there is little I can do on this charge. Also, I rebooted it after the latter. It made no difference.

  Another person had the same problem AND fixed it? VAC

  I have it! This guy has the answer:

  https://www.YouTube.com/watch?v=l5gZE2_7gJs

• Satellite A200-10W: I lost dual-mode Touchpad after Windows update

  I got a satellite A200-10W. The touchpad worked well at the beginning. Then, an update of windows has been installed and I lost dual mode on my touchpad.

  It is for me a normal function as a touchpad, but the mode button does not work. It lights, it do give me the button options, volume control does not work it did not scroll even in normal mode either.
  I reinstalled the drivers both synaptics and alps, but nothing helped.

  How can I ever use dual-mode again?

  Thanks for any help!

  Hello

  Very strange I didn't noticed any problem with the touchpad after the windows update.
  I have updated my windows and then lost the sound. After restarting again I ran the update and the Øresund back

  But if you, it seems that the MS updates could be a bad influence on the functions of touchpad.

  Have you chosen the touchpad drivers just for the PSAECE series?
  The Synaptics Touch Pad driver to set the properties and the touch pad control functions.
  And the Alps Electric Touch Pad Driver allows you to set the properties and functions of mouse control.

  Perhaps you need to configure the settings again after the new installation of drivers touchpad?  :|

  But have you tried to update to Windows Vista again? Sometimes, you have to restart the laptop to get all the necessary updates that will fix the problems.

  In a value of the case, recover the laptop and does not perform the updates of windows

• delay after typing my password with the message: "preparing your desktop" displayed on the login screen

  I use Windows Vista for about 3 years now, it has been hurt on the first day.  However, it is the biggest problem I've ever known.

  My PC is currently the entire installation, which means that all the software, drivers and personal settings are applied to the way I would like it. But lately, I have had opportunities indicate that loggin, there was a long delay, after typing my password with the message: "preparing your desktop" displayed on the login screen (the PC was night shotdown, not having changed anything to the system), then I am connected to a desktop where I lost all my custom settings : wallpapers, plans, location of the updated table on the page icon, were all gone as if I start Windows for the first time, and every program I tried to run from there thought while they started upward for the first time.

  My office, I know, has completely disappeared.   How can I get it back?  Where at - it go?

  I am a school teacher and my student missions, etc. are in the files on the desktop.

  I'd appreciate any help you can give me.

  Please keep in mind that I'm not a techno person and very little familiar with several computer attributes.

  Thank you

  Press Alt + Ctrl + delete

  Start the Task Manager

  Click new task below or click file > new task

  Type explorer.exe

  Click ok

  Bring this back?

• HP ENVY Notebook PC m6: after updating windows 10 touchpad freeze shortly after using the keyboard

  Hello

  I've updated my laptop it has windows 8.1 to 10 and for a few days then my touchpad/pointer has been gel 4-5 seconds after I touch any key on the keyboard. for example. If I hit enter then I can't move the pointer for a few seconds... I can always use the left and right click while the pointer does not move.

  Everything worked perfectly until I upgraded to windows 10 and everything else outside the mouse freezing seems to work properly after the upgrade.

  Any help fixing this issue would be greatly appreciated, thanks!

  Hello @juibre,

  Welcome to the Forums of HP Support!

  I understand that you are having a problem with your TouchPad and wanted to help you!

  For starters, can you provide me with the product number of the laptop?  Here is a link, you can use that will help you find your model and product number: How can I find my model number or product number?

  In the meantime, please see the post by Member of the DanG82community.  In this post, you will find details of disputes with keys touch after installing Windows 10: Re: How do I solve the Post-Windows 10 questions about HP laptops Upgrade

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Satellite L305D - Touchpad does not work after installing Windows 7

  I had recently installed Windows7 32 Bit there is almost a week on my Toshiba Satellite L305D-S5934, and now the tablet to the PC no longer works.

  I was reduced to using an optical mouse on my computer. I've updated all my drivers and firmware etc on the windows update software and still I have not been unable to get the touchpad working. Windows 7 had installed the driver of synaptic for the touchpad pointing stick, but im guessing that he needs a special Tosiba firmware to recognize the touchpad for this model. What should I do to get the touchpad working again?

  Here are the specs of my model:

  PC x 86 ACPI
  64-bit AMD Turion X 2 processor
  ATI Radeon 3100 graphics card
  Synaptics PS/2 Port TouchPad

  I installed Windows 7 on my Satellite Pro P300 and touchpad works properly. The OS is naked and I didn't install any additional touchpad driver.

• M6-1035dx Pavilion: Pavilion m6-1035dx touchpad y axis too sensitive after upgrade Windows 10

  I installed my m6-1035dx Pavilion at 10 Windows laptop. Everything seems to work pretty well, except the touchpad. The Synaptics 10 Windows driver is much too sensitive along the y-axis (vertical movement), but it is very well along the x-axis (horizontal movement). If I try to move my cursor in a circle, I get an ellipse instead, and this disparity makes it very difficult to use touchpad. Sensitivity adjustment does not help, because it scales sensitivity times X and Y at the same time.

  I tried these different drivers with varying results:

  1. latest Synaptics touchpad driver for Windows 10 (version 19.0.19.1): Y axis is too sensitive with respect to X axis. Otherwise, this driver seems to work perfectly.

  2 no driver (Windows using the generic PS/2 mouse driver): X / axes are correct, but no other feature of the trackpad works (scrolling, etc..)

  3 last Synaptics touchpad driver driver from HP for Pavilion m6-1035dx (version 16.0.5.1) page: X / axes are correct, but scrolling does not work in many applications. This driver does not officially support Windows 10 (I think that it supports up to 7), but it seems to work correctly in Windows 10, aside from the problems with scrolling.

  I would point out to Synaptics, but they do not seem to support (as far as I can tell), so I'm posting here in the hope that someone would have an idea of what I can try next. There may be a hidden registry setting that I can change?

  Hello @mrbumpy409,

  Thanks for the reply.

  I also looked in the registry, I couldn't find anything that jumped. I speculated with the values of height and width of the corner, but change does not seem to do anything.

  I have no information on the release of driver, but you can try the driver compatible windows 8 rather than windows 7 one.

  Version: 16.2.10.12
  sp58572.exe

  Thanks, I look forward to your response.

  If this post helped you, feel free to click on the thumbs up!

• Anyone know how to use the buttons on the touchpad while typing? (Windows 8)

  I've already solved the problem when I use the touchpad when typing, but not the buttons on the touchpad while typing, I really want to play this shooting game where I have to run and I can't shoot while running I have to stay still and push that I will be bitten by zombies does anyone know how to solve this?

  Have you already checked this option?

  

• lost touch pad dell drivers after installing Windows updates.

  Separated from this thread.

  I did the update and lost contact dell drivers pad and now I can't play all the games that I got on the computer. The previous update lost my sound card drivers.

  Hi Craig,.

  Thanks for posting your question in the Microsoft Community forums.

  I'm sorry to know that you are facing problems after installing Windows updates.

  Any Windows specific update which is the origin of the problem or you face the problem after installing updates? This is to check if the updates you receive are associated with hard devices.

  To view your history of update, follow these steps:
  a. open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), tapping or clicking on settings, tapping or clicking change PC settingsand then by typing or clicking on update and recovery.

  b. press or click view update history.

  I wish that you install the Dell Web site touchpad drivers.

  You can refer to this article for the procedure: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=1JW07

  In addition, if all of the updates are at the origin of the problems with the hardware on the PC, then I suggest you also update the drivers from the Dell Web site chipset.
  See the article:

  Download and update drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• Firefox runs very slowly after updating Windows 10

  Saturday, December 12, 10 Windows spent an age of update itself, with several reboots. Since then, the navigation is horribly slow with Firefox, although my internet connection is always very well (fast my Smartphone using Microsoft Edge). I have two PCs, and both seem to have been affected in the same way. Using the Task Manager, I see that Firefox uses a lot of CPU most of the time - often more than 50%. Even typing and scrolling are very slow, not just downloading.
  I disabled all my add-ins and plug-ins, run in safe mode, rebooted and reinstalled Firefox without result. So far, I'd say that Firefox is the fastest browser. I think that Firefox updated itself 42.0 version a few days, so I have a suspect that this slowdown has occurred just after a Windows Update.

  Update: Windows update itself again today and, like magic, Firefox is again well. So problem solved.

• Spotlight closes after typing a few characters (El Capitan, Mac)

  I have updated to ElCapitan 10.11.3 version last week.

  Projector worked fine the first few days. But now the spotlight window closes just after typing a few characters. Normally after 2,3,4 characters. I tried to index all the files again, but that he has not solved. Reset did not help either.

  Does anyone have an idea?

  Thank you very much!

  PS: this question is posted because I wrong the other marked as resolved...

  There are problems now with the latest updates to Safari - El Cap & iOS - where it crashes when you type in the address bar WITH active... 'Suggestions of Safari"you recently updated El Cap? If Yes, what date & time (important - the parsed page Apple database has been corrupted for a period of time) - Spotlight may hit the same DB

  try disabling 'Spotlight Suggestions' OS X El Capitan: search with Spotlight

  Let us know the results of that thing