Delete locations of XY graph at design time
Thanks to LabView 8.6
I inherited several screws maintenance and have met the 'next question' - there are multiple XY graphs, tracing a variety of data and by optimizing things to remove redundant data or unnecessary properties of the XY graph reflect still have 6 slots instead of the 3 that are connected on it. I reduced the caption to include only 3 plots that are actually linked, but properties dialog box still shows 6 locations, both named 'conspiracy 3' and 'Plot 4' and a "V2" Unfortunately duplicate name for what would be the plot 5. Running the VI does not seem to change what contains the properties dialogue box, although it is not all negative effect (within a few seconds of running).
Is there a correct way to remove the plots exist or is - this something where I have to delete the XYGraph and place a new user interface and connect as usual? My biggest concern is that there is a duplicate name that could cause problems at some point, or that this thing is just lose the memory and the CPU cycles and there will not be a problem until the system has worked for 10 hours.
I have attached a picture of the relevant connections (the VI is ridiculously huge and unwieldy to post... don't get started me on the ineffectiveness, it's just that I inherited to maintain), but there isn't really anything unusual here.
All the plots of old who receive more data will not appear, so it is not really so important to remove them. Resize the legend the number of valid locations.
Yet the current situation is not ideal, that's why I posted this idea a long time ago. Please vote for him!
Tags: NI Software
Similar Questions
-
Photos crash when deleting location
On his return from holiday, I imported hundreds of photos from my camera Panasonic ZS40 in Photos. The ZS40 has a built-in GPS receiver and embeds location information in each photo if available.
Seen in Photos, many (but not all) imported photos appear to have incorporated location information (the little icon 'card' is displayed in the corner down left), but photo location does not appear on the map in the information area. A map appears, but there is no bug. On the other hand, the info box displays "looking for information about the location..." This opinion never disappears, and location of the photo never appears on the plan (which is not relevant to where the photo was taken).
I suspect that the ZS40 had not yet acquired GPS lock when these photos were taken. Maybe he wrote by default (or defective) lat/long coordinates in EXIF data structure embedded in the JPG file. In order to correctly assign to the right place in the Photos, I clicked on Image/location/delete location, with the intention to then manually add the location where the photo was taken. Photos promptly crashes as soon as I click delete location.
This happens every time. I have tried on dozens of different relevant photos, with the same result: pictures of accidents.
There seems to be a coding bug in the program of Photos (I don't like any more whenever I use it).
Can anyone suggest a work around with (or without) photos?
Can anyone tell me the location of the actual JPG image file which Photos has hidden somewhere in its database? (With iPhoto, it was easy to find the actual file...). If I can find the JPGs, I might be able to inspect (and perhaps correct) defective lat/long data in the EXIF data with a geo-tagging 3rd party utility.
1.3 photos
10.11.3 OSX
Try to manually add the correct location before removing the current location
You can export the unmodified original (menu, file == > export) and then import the corrected photos and remove all original with Photos photos, as it should
The original files are in your photo library in the Masters folder - you can see by clicking on the photo library and shows the contents of the package
BUT, be VERY well sure, you have a great current backup
It isn't really a good idea to waste time in it - there is no serviceable parts by the user in the photo library, it is not designed for human interaction and there is background and iCloud library current operations that may cause problems or even damage your library - it has never been taken in charge are smart to waste his time inside the library and with pictures it's very dangerous
and there are a few user scripts to deal with GPS - they might be useful in determineing you have or even fix - Photos for Mac
LN
-
Location of custom and overview of design-time component
Hello! Is it possible to have overview of time to design for localization?
I would also like to know that from where flex builder gets all the default values for the example button label?
I believe that you can saw design time of strings localized resource bundles. You will need to launch the application.
If this post answers your question or assistance, please mark it as such.
Greg Lafrance - Flex 2 and 3 certified ACE
www.ChikaraDev.com
Flex / development, training, AIR and Support Services
-
https://blogs.Oracle.com/ADF/entry/changing_endpoint_url_for_a_web_service_data_control
Using this link as a reference, I created a data control Web Service, and when I deploy via JDeveloper for different environments I can change my point of endpoint accordingly on this screen:
However when I change my point of termination at the design time, the changes do not appear in the screen "Configuration of the deployment. This would not normally be a problem, but our automated deployment (maven/ant) seems to keep picking up the url "Deployment Configuration" instead of what we change in the DataControl.dcx. So I have a few questions:
1. Why is there a difference between what we have in the source code and what is shown on this ""Deployment Configuration "screen for manual deployment of JDeveloper? "
2. where is this "Deployment Configuration" end point url located? I can change it during an automated deployment as I can on a manual deployment?
3. What is the best practice to change a url endpoint to the Web Service data control with during an automated deployment?
It turns out that the connections.xml had the url of the endpoint that the profile of the deployment and jdeveloper was referencing at deployment time.
In order to get our automated generation work, we use a search and replace of Ant utility to change endpoint in this connections.xml before construction/deployment of the application.
-
Hi - I created a photo album on my iMac with 241 photos in it, but my iPhone shows that 220 photos from the same album. I've deleted the album and created a second time, but got the same result, only 220 photos appear. I 2.9 GB available in iCloud, so it can't be the issue.
Al
Try the settings/iCloud and remove the synchronization. Wait a few minutes and then resynchronize.
Have you tried the signature to iCloud and then reconnect?
-
data is plotted on the graph of absolute time delay
Hi all
I'm plot data on a graph of absolute time and I find 2 hours difference between the data displayed by the debugger (left) and data on the graph (X - SCALE AUTO).
The time saved in ptTime, was acquired by using the function 'time' and the PC has Amsterdam, Berlin, Rome as time zone.
Here, under a screen shot that implemented the code, the debugger and the result.
The debugger is also showing the version in good time!
Can anyone suggest me how to process data in order to have the same result on the debugger window and on the graph?
A big thank you and best regards
Sergio
Question: in the CVI debugger show you, the time_t variable appears as a double, while its definition in 'time.h' is ' typedef unsigned int time_t; "so I am a little confused.
Response: I did something nonsense in this screenshot: I took a variable of type double (it happened to be a UIDateTime, actually) and configured the debugger to format as if it were a time_t variable. The formatted values that the debugger shows me, therefore, are not valid, of course. But I just wanted to show the time_t format, because it corresponds to what you have in your screenshot, and I was already suspicious that you use time_t variable to pass to the curve.
Furthermore, if you are not familiar with the way in which you can change the formatting in the debugger, this is how you do it:
Usually, the debugger can automatically pick the best format to use, based on the data type of the variable (for example, with variables of time_t). But in this case, what the debugger calls a variable "Date Time" is all just a double. The debugger cannot assume that you want to display all your double variables as a 'Date Time', and so you need to replace yourself.
Question: I was not able to find UIDateTime using the ICB type, this is the value returned by GetCurrentDateTime(double *)?
Response: There is really no such thing as a type of data "UIDateTime". I've been a bit remiss with my terminology. Unfortunately, when you're dealing with dates and hours, there are several possible representations of these quantities in the world of C, and it is important that you use the correct the intended variant you use for. In this case, the chart controls expect that you pass the time format used by the library of user interface, that is, one that is returned by the GetCurrentDateTime or MakeDateTime functions. The underlying C for this representation of the time data type is simply twice, and so it is not a good name to refer to it. That is why I used UIDateTime, but I should have been clearer than that.
Question: Y at - it a function to convert time_t values UIDateTime values
Response: Yes. You can use the functions of the programmer's Toolbox following two, in exactly this order:
CVIAbsoluteTimeFromCVIANSITime (time_t ansiTime, CVIAbsoluteTime * absTime);
CVIAbsoluteTimeToCVIUILTime (CVIAbsoluteTime absTime, double * uilTime);
-
the value of Listbox fonts at design time
Is there a way to set the font for all the lines of a ListBox at design time?
I found some examples on how to do it programmatically, and I was able to do by changing each line at a time.
Just select the list box, and change the font! Presto, everything is done at the time.
-
Attempt to delete pictures in my pictures and every time you send to trash, it makes a duplicate copy. How can I remove it without the computer by creating all these copies. Pls help. TKS.
original title: remove duplicate photosUnwanted copies have file names with
copy "prefix of"?Example: Copy of IMG_1455.JPG
If_yes_maybe the following tutorial, I wrote
for XP offers a few ideas:Here's how to reproduce the unwanted
copy of...Hold down your CTRL key and select multiple files...
Place your pointer over the selected group
(holding the key ctrl) and left click / drag
the group even just the slightest bit... now
release the mouse button.Oooops... multiple copies...
Maybe the following will help:
Sometimes most of the person who
trying to select multiple by holding the CTRL
or the SHIFT key down while clicking on the left to select the
image files.Copies are created when you are unable to
completely release the mouse button before
you move the pointer to another file. When a group
the selected file is dragged... even the slightest
release the mouse button will produce a bit...
copies of all the files previously highlighted.It's a little easier if you have your folder
Options set at single click... that way you can
select/deselect a file with just a mouse more
and you don't have to click. For multiples you
I have to keep... CTRL or Shift.Do not click on... no slip... no copy... maybe that of
your solution. To adjust the click...
Open a folder and go... Tools / folder
Options / General tab... Check... 'single click '.
To open an item"/ apply / OK.If you want to delete all the files in a folder
You can try the following:Reach... Edition / select all... or type... CTRL / has...
With all of the files selected... go... Drop / delete...
or press your delete key... or... click on the
Group and choose 'delete '.How do I find and remove unwanted 'copies '.
of your image files.Open the folder that the images are saved in and
on the left, click on the button 'Search' in your toolbar.(If you view the files from a montage
program and do not know where the record is... right
Click on one of the image files and the menu...
choose... Properties. The path to the folder will be
in the tab 'General' to 'Place').In the research pane select... "All files and folders".
In the "All or part of the file name" field. Come in...
a copy of
Now... on the left, click on the search"" button.
When the search is complete... go to... Edition / select all...
Then go to... Remove / delete.
You will see a dialog box asking if you are sure
you want to delete the files, click Yes.Now... on the left, click on the 'Back' button in your toolbar.
Now the remaining files should be your originals.
If you delete the wrong files... recover from
your basket now.Also see the following article:
Trouble fixing: stop Windows copy
Files accidentally when Ctrl-click selecting
http://www.howtogeek.com/HOWTO/Windows-Vista/fixing-annoyances-stop-Windows-from-copying-files-accidentally-when-CTRL-click-selecting/ -
Windows System 32 does not locate khatra.exe is move every time when I start my laptop that I have to remove khatra.exe from my laptop
Hello
Information KHATRA.exe
http://www.bleepingcomputer.com/startups/not_used-24897.html
It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
the Windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
no visible vertical/horizontol scroll bars at design time
Hello
I use jdev 11.1.2.4.
How can I make scrolling vertical/horizontol bar appear during design time?
Thank you
Are you talking about the scroll bars in the visual page JDeveloper Editor?
If so - try and set the resolution of the Visual Editor from the drop down above.
I would recommend picking up of components in the component structure.
-
Hallo,
ICH tests zur Zeit den Dreamweaver CC 2015 und bin bisher danke sehr.
However fehlt mir eine important Funktion, die ich kenne aus Dramweaver CS6. VIELLEICHT kann mir einer well, sharp Funktion im newest DW finde ich wo.
IM DW CS6 kann man per Rechtsklick im - sheets of Style CSS-Stile-Fenster für die Entwurfsphase festlegen. -Wo finde ich sharp Funktion im DW CC 2015?
Vielen Dank im Voraus as Eure that!
Gruss
Jorn
[Line object translated in English to facilitate the solution to find]
Thank you, David.
I found a solution to my problem.
I can manually create information DW CC 2015 needs to time Design-Style-sheets.
When this information is then DW CC 2015 use it.
For example:
I have the /pages/download.html file and want a design-time-stylesheet for it with the css file in /css/bootstrap.css.
1 create a _notes folder in the pages of the file.
2. create a text file named download.html.mno in the _notesfolder.
3. the content of download.html.mno must be:
She's.
Thank you.
Jorn
-
I put my button icons in a signed gif, and they work fine when running.
The problem is at design time, I can't display their icons properly.
I have to convert the GIF to ico and place them in a folder referenced by the UI_ICON registry variable old.
Also, since gifs are 16 x 16, they are harvested at the time of the design, because I see them as if they stretch to size 32 x 32.
At least, it would be enough, if I could place the gifs directly somewhere, without conversion to ico.
It seems as if oracle did not put all development work in the generator, which is like a direct version 6i c/s port.
Since you don't mention exactly what forms version you are using, I guess that and I guess it's one of the many versions after 6.0.8. The 9.x + Forms Builder supports gif, jpg and ico files. It does not however read of a jar. Therefore, you have to extract to a directory defined by UI_ICON. In addition, the files must be of the same type (jpg, gif, ico). Mixing formats is not recommended or supported. The format of your choice can be defined in UI_ICON_EXTENSION
So, for example in your registry, you might have something like this:
UI_ICON = C:\myImagesDirectory
UI_ICON_EXTENSION = gif
"Gif" being the default, there is no need to set this if you use "GIFs".
-
How can I delete CS 5.5 Standard of design of a stolen computer?
How can I delete CS 5.5 Standard of design of a stolen computer?
ask a number of adobe support resetting activations. Contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html
-
TextInput style, change at design time.
I'm new to Flash and working on the development of an iOS app.
I have my first app of base running.
My question is, how do I change the style of my TextInput at design time?
I see how to do it in the code, but I hope I won't have to have a lot of extra code, justto set the styles of the entries.
Thanks in advance,
Clint
One way you can probably do is to doubleclick the component on the stage and manually change the parts that compose it by doubleclicking and their modification.
If you use a component TextInput and you have problems with the fact that code for this style, you might consider switching to just by using a Textfield. Components tend to be somewhat heavy creatures, partly because of the various graphics they carry but mostly because of the code that they carry. To see how the TextInput contributes to the weight of a file, start a new file and place a TextInput onstage. Then, with the Flash option publish Settngs to generate the report of chosen size, publish the file and see the bytes contributed in the output panel.
-
VBOX properties created at the Design TIME vs time
So I am familiar with the Vbox property horizontalAlign and I would have put in general to the center when I create a design-time. Now I create components to run and to align all the children of the Vbox (or under-delivery in the Vbox) so that they are centered, but there is no horizontalAlign property to set. So my question is, one how can I ensure that all my Vbox components are centered and two, will I run into this sort of thing with all components.
horizontalAlign - is not a property you could although at first, it's a style
Thus, in order to put in it use vbox.setStyle ('horizontalAlign', 'center');
Maybe you are looking for
-
CyberLink youcam is blury and blurred
Why is my cyberlink youcam went blury and blurry all of a sudden? Skype is also like that. How can I solve this problem?
-
Hi all I am having some problems trying to connect to a Kollmorgen AKD P00306. For the setup of the car, I used the following step-by-step guides. http://www.NI.com/PDF/manuals/375516b.PDF and http://www.Kollmorgen.com/UploadedFiles/products/drives/A
-
IRQL_NOT_LESS_OR_EQUAL (0X000000A)
Just, I formatted my HDD and reinstalled Windows. Initially, I had tons of problems for Windows Installer (very random BSOD), and after running Memtest86 on each stick of RAM, I found a wrong key. So, while I'm waiting for an RMA on that... I conti
-
Windows Media Player play my video on the side. How to fix this?
This isn't my problem phone or the way I shot the video or the angle, it has been taken. It is a MP4 video file. If I play the same video in Quicktime or other programs this is very well, but not in Windows 7. I would like to know how to solve this p
-
I have a desktop with windows 7 and a Linksys E1000 router and you want to connect a laptop with windows 8, it will work router?