Dell Controlpoint (Latitude E6400) connection manager
Dear community,
I have a Dell Latitude E6400 laptop with Win 7 64 bit, 5530 Card HSDPA, Wifi, Bluetooth and I can't download the Dell\Downloads controlpoint Manager application (it is automatically as updates/download drivers and applications for my laptop Dell based on the tag). Can you help me please where I can download this application, it works on my laptop, or have I reinstall it (However, I do not see something like that)?
Thank you very much!
Kind regards
MY
Hi maland,.
Please visit the following link to download and install the Dell Controlpoint Connection Manager Application: http://dell.to/132945B
Let me know the results.
Tags: Dell Products
Similar Questions
-
(Dell Latitude E6400) Windows 7 64 bit Dell control point
I installed Windows 7 64 bit on my Latitude E6400. I can't find any way to install the Dell Control Point. I got the Pack of drivers to install. I found a single download of the Security Manager who has worked, but I would like to than the power one Manager.
I looked on this forum a few times and all the links I click redirect just me at the page downloads and drivers. I get an error saying that my service pack is not supported... I'm on Windows 7 Service Pack 1. I have also some 32-bit errors, but it's my fault to have downloaded the 32 bit version.
Someone has a link to the full package of checkpoint Dell (Power Manager, Manager of connections, Security Manager) that works on Windows 7 64 bit?
Thank you
-Ryan
parrotrpg1
Here is a good article on reimage the Latitude E6400
Win 7 Control Point System Manager files are a little hard to find, but they can be downloaded from the following link.
www.dell.com/.../DriverFileFormats
This will help you if you have installed the drivers in the correct order.
TB
-
Original title: problem starting Latitude E6400 lappie
Hi all
When I start my dell latitude6400 is not start pressing the power instead button I have to remove the battery to the rear and place it again, and then the lappie starts... someone can help to...Thank youHello
1. what happens when you start the laptop, you receive no error message?
2 have you made any changes to the computer before the show?
I suggest to remove the battery and connect the laptop to AC power and then try to start the computer to see if the problem is with the battery.
I suggest you to contact Dell support on the issue, as this can be a hardware problem.
http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=DHS&CS=19
-
Latitude E6400, dell: HP officejet 4215 printer does not meet Dell computers
Dell latitude E6400 window 7 (directly connected to the printer), window of inspiron Dell 8 3520 (wireless), they do not meet the printer. I HP4215 like a printer by default on both computers, but I can't print anything. Please advise! Thank you!
Hello @azarita and welcome to the Forums of HP, I hope you enjoy your experience!
I understand that you are having problems printing from your system. I would like to help!
I would recommend you to do a power reset the printer. Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.
I suggest also download and run the HP print and Scan doctor.
Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!
-
Screen turns black during the installation of Windows 8 on Dell Latitude E6400
Hello
I have a Dell Latitude E6400
The specifications are:
Intel Centrino 2
4 GB OF DDR2 RAM
HARD DRIVE 160 GB
Core 2 Duo 2.53 GHz
NVIDIA Quadro NVS 160M 256 MB DDR2
I'm doing a clean install of Windows 8 pro 64 bit. The problem is that when I get to the stage where the installation application to connect to a wifi, all of a sudden, the screen goes black and then nothing happens. Sometimes I am able to move on to the next step where the installation process asks if I would like to use express settings or customize it. The same thing happens on this stage too. I could not go any further than this step.
I tried dozens of times, even tried 2 different iso files and event tried a 32-bit Windows 8.
Same thing happens evrytime, black screen and then nothing. I wasn't able to find that everything related to the internet.
One last thing, if it's a problem of display driver, I can't set either because I already formatted my HARD drive.
Can someone help me please:(c'est vraiment frustrant.)
Thank you
Hi shayanjalil,
Dell Latitude E6400 has not been tested by Dell for Windows 8. You won't find drivers of Windows 8 for this system.
-
Dell Latitude E6400 LCD / LED video screen has partial display of vertical lines
Hello
I have a Dell Latitude E6400 on which display LED screen / video shows the stable vertical lines in the right half of the screen (partial view on the left side is good, see photo). I have already tested the external VGA port - it is displayed correctly on an external LCD display. The vertical lines are constant and the same brightness, regardless of the position of the lid of the laptop. This could be a problem with the inverter or the water of the LED screen? Or something else? Thanks in advance for any comments.
P. S. Please note that glow Golden on the top left of the screen is just a reflection of ambient light.
It is not the inverter (assuming that the display has a); who simply controls the backlight. It may or may not be the cable - it's not likely. It resembles a billboard damaged.
-
More Compatible with Linux XFCE for Dell Latitude E6400
What version of Linux with XFCE interface do you recommend for the Dell Latitude E6400?
Xubuntu: http://xubuntu.org/
-
(Redirected) New keyboard for Dell Latitude e6400 does not
I recently purchased 2 computers laptops dell latitude e6400, but both have the same problem, the keyboard does not. I'm even not go into the BIOS (F2) settings using the keyboard of the laptop. using a wired USB keyboard works very well. any suggestions?
As you have a laptop, better make this laptop in the computer Forum post here:
http://en.community.Dell.com/support-forums/laptop/default.aspx
Bev.
-
Dell Latitude E6400 running slow
I have a Dell Latitude E6400 - it has 4 GB of RAM and a processor 2.53 Ghz running Windows 7 Enterprise 64-bit - how is it is slow? I ran all the troubleshooting I can think, made malware scans, virus scans, and it is still slower than my other laptop that has 1 GB of RAM and a processor 1.73 Ghz - ideas? Thank you!
The problem is that the CPU is overheating and when it the fact that the processor at 800 mhz speed and stay there the CPU goes to 100% usage and the system dies. I had this problem for 2 years before I understood what it was. I took off the bottom of the computer (a screw in the middle). Removed the heatsink to the CPU/GPU and cooling fan. I have removable fan and removed the therma spent the CPU and the GPU thermal pad. I have then divide a tube of thermal paste Arctic Silver 5 Radio Shack ($10) and replaced the heat sink and let it heal from one day to the next. I also bought a block of cooling fan powered to the computer but never needed to use it. The machine works like a monkey assed stipped running multiple video streams at the same time and cool enough to keep al running stayng. I was ready to relegate this machine to a storage device, but now it it GREAT. Good luck
-
factory setting dell latitude e6400
I have a Dell Latitude E6400, it came with Windows Vista 32-bit, there now Windows 7 64 bit. should I try to go back to Vista or just stay with Windows 7 64 bit?
Hello
Thank you for contacting Microsoft Community.
You can continue with Windows 7 64 bit. It is safer and more stable than Windows Vista. You can get all the necessary drivers for the hardware of the Dell Web site, in order to work with Windows 7 will not be a problem.
See you soon.
-
Original title: keyboard disabled in windows 7
Physical keyboard on my Dell Latitude E6400 got off after my kid pressed some keys randomly.
It runs on Windows 7 OS. Same external keyboard does not work. only the touchpad and mouse work.
Any help would be much appreciated.Thank you
Hello
Run the Troubleshooter:
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-TroubleshooterCheck if you are able to use the keyboard to the screen.
On screen keyboard
http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboardIf this does not help, I suggest you to contact Dell support and see if they can help you start on the BIOS and check the settings for the keyboard. You can also check with them if you can run any hardware diagnostic tool.
Link to contact Dell support: http://en.community.Dell.com/support-forums/laptop/f/default.aspx
-
Latitude E6400 taken helmet does not
I have a Dell Latitude E6400 with Windows 7 Enterprise 32-bit Edition. I installed the chipset drivers, then the rest drivers until there is no bangs in Device Manager. When I plug in external speakers to the headphone jack, however, there is no sound. Test the speakers on another system, and they work.
I worked on it for a few weeks and I'm out of ideas.
faithmarianDell service manual does not (or I couldn't find) information on how to fix an audio input jack broken.Hello. The plugs are on a track called ' I/o card' in the maintenance manual. You need to replace the circuit board, but it there are 2 different according to the graphics in the computer. See here.
-
Latitude e6400 network controller
Hi, try to install the network and Broadcom USH controller for a latitude E6400 driver and can't seem to find the correct file to download.
Running Vista 32
Service Tag 1MDXZ1S
Any help would be greatly appreciated!
Thank you
Normally this driver do not something other than what you have seen.
However, if you are not signed in, then obviously it has failed.
Now that I know you have the wireless card, then try the driver from the Dell support site for your model.
-
Rick2425
When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start." Also, I can not restore the system to come and let me run it.
It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.
Hello Rick2425
See the thread below and let me know if it helps thanks.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1
-
Can not get to start remote access connection manager and the connections don't work Internet
Original title: wired & wireless connections does not.
I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?
I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.
Hi Rick,
1. what happens when you try to start the remote access connection manager? You receive messages or error codes?
2. you receive error codes or restore messages when you perform the system?
You can check the status of the following services and make sure that the services are started.
a. Click Start and type Services in start search and press ENTER.
b. in the services with the right button on the phone and then click Properties.
c. under the general tab, select automatic next to startup type.
d. under the general tab, click Start under the service status and then click apply and then click OK.
e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.
Hope this information is useful.
Maybe you are looking for
-
I am a member of FineartAmerica and I have a work of art that I need to download on the site, however I have tried several times over the past week and was unable to do so, even if I can to other sites, I've gone through their checklist and everythin
-
Update the BIOS on the Satellite Pro L500 (PSLS4E-00C00HIT)
I just received the newsletter of thir FTP - URL of the bios - 20100629135948.zip Data di ultima change 29/06/10Ragione social ToshibaUpdate the BIOS typeWindows-based SottotipoSize - Super (Kb) 2679Version 2.10 - WINUniversal linguaa World WideDescr
-
Updated my payment information still does not and I have a deadline, how can I speed this up?
-
How do you define the ID of a symbol when you dynamically add it to the stage?
I use this to try to give the symbol ID:s.setVariable ("id", data [i] .title);The problem is that I try to hide all the symbols later on a button, click. I can't understand how to hide them. I tried to use Firefox to inspect the divs in the browser,
-
I just got a new desktop and I'm working on how to get the creative programs cloud I use (bright room and Photo Shop) off my old on desktop and on the new office. Someone know how to do this or have already done, or you cancel the subscription on the