Install a non-of a Dell Poweredge 2850 server operating system

Similar Questions

• A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  I can't believe it.

  When I start up a virtual computer, it gives a wrong message shown in the picture below.

  Does anyone have any ideas on this?

  Usually not enabled virtualization technology in host BIOS.

  Take a look at can not power on a 64-bit Windows VM

• Dell Poweredge 2850 and ESXi 4.1

  I have a Dell PowerEdge 2850 with 12 GB of RAM and two CPUs, hyperthreading with 350 GB of disk space.

  This box was initially installed with Redhat Linux ES 5.4 64-bit and OS 64 bit CentOS 5.5 with no problems, so I know the processor supports 64-bit.

  I then installed VMWare ESXi version 4.1 on the Dell Poweredge 2850 with no problems.

  Then, I created a few instances VM I want to install CentOS 5.5 64 bit.  During the installation of a VMware instance, I get this:

  msg.cpuid.notLongmodeQuestionFmt:This veritual is configured for 64-bit operating systems.
  However, the 64-bit mode is not possible.
  Longmode is disabled for this virtual machine.
  For more information, see http://VMware.com/info?id=152
  Continue without 64 bit support?

  Now the question I have is this: given that VMWare is problems with 64-bit OSes comments, how is it that I can install CentOS 5.5 64 bit on this Dell PowerEdge 2850 with no problems.  It seems obvious to me that the PowerEdge 2850 works well with the 64 bit OS but not ESXi 4.1.

  How can I get around this?

  Comments?  Thanks in advance.

  The dell series 8 (1850/2850) have no vt support, so not support 64-bit virtual machine, except 6850.

  The output of the processor shows the same thing, or rather, what he shows no vt in its ability.  It shows lm, long mode, so you can run 64-bit, that you are running ESX, but to succeed in this 64-bit support, you need the lm, you and vt, which you don't have.

  -KjB

• Dell PowerEdge 2850 does not start on a CD of ESXi 3.5

  Hello...

  I have a Dell PowerEdge 2850, who does not start on a CD of VMware ESXi 3.5.  The server works very well with Windows 2000 server.  My first thought to solve this problem was the BIOS.  This is all what I've updated in what concerns the firmware on the box today.

  BIOS - A07

  Perc4e/Di - 5B2D, A19

  BMC Firmware - 1.83, A10

  Here are the latest versions of firmware available from Dell on this box.  The machine starts to start the machine.  But all I see is the first line of text of the CD which is the following:

  ISOLinux 3.63 2008-04-10 Copyright (C) 1994-2008 h. Peter Anvin

  My next thought was that there was something wrong with the ISO image that I downloaded.  I tested it on another machine; has worked like a champ.  Now, I read on a few different posts within the VMware communities that some people have had luck with this question and others did not.

  The inventory number of Dell on the machine is 6HDGS81

  Any advice would be greatly appreciated.

  Some of the Dell CD-ROM may be little flighty. I had hard time to install a CD earlier which worked perfectly well on another machine. I made another copy of the disc, this time burning the CD at a 4 x speed. The installation went perfectly fine afterwards.

• Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?

  I have a PowerEdge 2850 server, that when he was initially put in place (by someone else) had Windows 2003 R2 top.  However, when they put in place, the partitioned the C: drive with so little space that it is running out of space.  We got a newer Dell server and I turned that 2850 off the coast.  It was interrupted for a month or two.

  But I would like to use it as a backup of database server.  Can I install Windows 2008 R2 Server on a PowerEdge 2850 Server?

  You need to install RAID drivers during the installation of 2008R2.

  1. Configure and initialize the RAID in the CTRL-M utility.
  2. Download and extract the drivers put on USB (or CD).
  3. Start on media 2008R2.
  4. On the screen that asks you where you want to install Windows, click on load a driver link at the bottom left.
  5. Navigate to the location of the RAID drivers.
  6. Choose the drive to install, then install.

• Cannot install ESXi 5.5 on Dell PowerEdge T620

  Hello

  I have a Dell PowerEdge T620 server and I want to install VMW VSphere Hypervisor 5.5 on that.

  I tried 2 ways above, but they are not successful.

  Track 1:
  -Start with DVD integrated with server
  -Config for RAID 5
  -Choose the option "VMW ESXI 5.5 HDD"
  -Error: "the provided raid configuration is not supported" and force reboot me.

  Track 2:
  -L' boot using an ESXI 5.5 CD-ROM
  -Follow the step on Setup screen.
  -Scan disk step HARD to install the process is too long too long scan...

  I hope that an idea can help me solve that.

  Thank you!

  You use the ESXi Dell installation?

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?DriverID=20VNP

• Impossible installed hp laserjet 3055 to windows 7 32-bit operating system

  Impossible installed hp laserjet 3055 to windows 7 32-bit operating system

  Hi Abhay,

  You can not install printer HP with Windows 7.

  1. do you receive an error message when you connect to the printer?

  2. what happens when you connect to the printer?

  3. were there any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Please let us know if you need more assistance. We will be happy to help you.

• OK, I NEED someone TO HELP me INSTALL LESS ESXi 5.0 on my Dell PowerEdge 1950 Server! And of course, HE IS No. TUTORIAL on this SITE FOR ME HELP!

  As I said earlier:

  OK, I am trying to install vSpere on my Dell PowerEdge 1950.

  Hardware specifications:

  4 GB FB-DIMM DDR2 memory

  x 2 processor Intel Xeon, 2 carrots, 3.00 GHz

  There a RAID BIOS, so I had to create a Raid 0 virtual disk to install anything.

  Drive hard WD 1 TB, it's the one I use for the VD.

  When I choose which hard drive I use, I select the VD, I created, I select my keyboard language, then the configuration scan my material, then he asks me if if want to install, I pressed F11. Then, when it reached 5%, it throws an error: "partedUtil failed with the message: error: can not have a partition outside the disk!

  He says that it cannot install it on a virtual drive? My server is not compatible?

  Edit: There is another error that says: cannot read the partition table for device:

  /VMFS/devices/disks/NAA.60019b90bd8289001e62575a584731e0

  What is going on!!! Why vmware cannot have tutorials on "How to install Esxi on a server with RAID BIOS"?

  Check if the virtual HARD disk you packed is initialized. It seems that the installation is not written on this HARD drive. Back to the HARD Disk Manager (you probably PERC5 / I) to start the process I think is CTRL + R? find your virtual drive and launch. Take a look at the image as an attachment.

• Step to convert the current Dell PowerEdge 1800 server in Esxi 4

  We have production server, which is Dell PowerEdge 1800 with Windows SBS 2003 with 3 hard drives in RAID. And then, we want to make this server as VMware Esxi 4 with the same Windows 2003 SBS server. We will replace the 3 new hard disks, but new readers are not the same as the old disks. What is the right next step? Because it comes to the production server, we cannot lose all data.

  1. use VMWare vCenter Converter to convert the current Windows 2003 SBS to VMWare workstation

  2. Replace with 3 new hard drives and install VMWare EsXi 4 CD

  3 use VMWare vCenter Converter to load WMWare workstation image into the new server Esxi 4.

  Please let me know if this is the correct order? Is there a risk? Thank you!

  Welcome to the community - that sounds about the right order =

• Dell powerEdge t420, server windows 2008 R2, RAID5, partitioning problem

  Hello

  [Dell powerEdge t420, windows 2008 R2, RAID5 Server]

  I have attached the picture of disk management.

  There are

  1 extended partition in which it is

  1 NTFS logical volume that completely fill the extended partition.

  But there is a small green free space 0 MB.

  Is this normal?

  Thanks for the info. I have install.

  I reinstalled the operating system

  and in OS partitioning step installation

  There were:

  a 1 Mb extended partition, then the logical partition.

  I deleted all and create 2 primary partition (1 for the Os) and 1 for DATA.

  I solved it.

  But I don't know if

  is the best performing primary or logical partition.

• How to install the upgrade after you have uninstalled infected by operating system

  A Trojan horse virus disabled by Vista operating system on a Dell computer. I don't have a return to the top of it. I have XP Pro OS upgrade purchased Ms Looks like I have to uninstall my current Vista operating system. Is there a way I can install my XP without an operating system on the disk hard once I uninstalled?

  A Trojan horse virus disabled by Vista operating system on a Dell computer. I don't have a return to the top of it.

  I suspect that Dell provides you with a hidden partition to reinstall Vista. Read the documentation that came with the machine.

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
  My Blog

• Why I can't install iTunes on my laptop with the Window 10 operating system

  Why I can't install iTunes on my labtop with Window 10 operating system

  Have you downloaded the latest iTunes from here and correct version

  https://www.Apple.com/iTunes/

  and then run the downloaded installer.

• Should I install a printer driver 32-bit on a 64 operating system?

  I have a wireless HP Officejet 6700e printer.  It is used by 2 computers.  The operating systems on the computers are as follows:

  1 - HP Pavilion laptop computer using Windows 8.1, 64 bit.

  2 - HP computer Pavilion laptop with Windows 7 Pro 64 bit.

  I noticed there are TWO 32-bit and 64-bit of the printer drivers for Windows 7 and Windows 8 and 8.1.

  I have 2 questions:

  First of all, given that two computers use 64-bit operating systems, shouldn't I install the 64 bit print driver?

  Second, is there an advantage to install the printer driver 32-bit on a 64-bit operating system?

  Thank you, Terry

  Install the driver that corresponds to the operating system and type of bits (32-bit or 64-bit) that is installed on each PC.

  Second, is there an advantage to install the printer driver 32-bit on a 64-bit operating system? There are no advantage at all. It would actually be a bad practice, unless the printer driver is compatible with both types of bit.

• How can I go on the upgrade by installing Windows Media Player 11 for Vista 32-bit operating system?

  I had all sorts of difficulties to install Windows Media Player 11 for Vista Version 6.0 system.  Can someone direct me as to how to install Windows Media Player 11 on my version of Vista?

  Thank you

  SWright20

  Windows Media Player is not installed correctly and must be reinstalled

  Restart your computer.

  Start > Search box, type cmd > u glance, upper-left, right click oncmd.exe > press Run As Administrator > at the flashing pronpt, type unregmp2.exe /UpdateWMPVersion > press the Enter key
  Note: to avoid strike fault and bad spacing, it is best to copy and paste the command line above instead of typing.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Adobe Premiere Pro requires new mac operating system. My Adobe programs already installed would work after the installation of the new operating system?

  Hey there,

  I think to get the Premiere Pro, which requires that the new Mac operating system. But I installed the other Adobe programs such as Photoshop, Indesign etc years ago.  These work on my current operating system (= Mac OS X 10.8.5).) Anyway, now I wonder if my programs already installed Adobe might work after the installation of the new operating system.

  Any ideas what to do?

  Thank you very much.

  Yes, they will work in the new OS.

  Kind regards

  Hervé Khare