Dell U3014 Rev A01 Scanline problem and translation mistake...

Similar Questions

• Dell Dock has encountered a problem

  When I start my computer I get this message: "Dell Dock has encountered a problem and needs to close. We are sorry for the inconvenience ". When I try to reboot, I get the same message. I am also unable to send the error report. When I try I get this message "there was an error when the error report is sent. Please try again"I'd like to solve this like using the docking station, Dell proved very useful.

  Hello

  Uninstall the application dock the computer Dell, and then reinstall the same and check the results.

  To uninstall, you can check the link below: Uninstall or change a program: http://windows.microsoft.com/en-US/windows-vista/Uninstall-or-change-a-program

  You can download Dell dock from the link below:

  http://www.DellDock.com/

  For help you can publish in Dell support, link: http://en.community.dell.com/?~ck_=_mn

• I bought the Tablet st 2 Dell Latitude with oem windows 8. After a few months. But since August the year last, I am facing problem and my device hung on several occasions.

  Dear Sir, almost a year I bought the Tablet st 2 Dell Latitude with oem windows 8. After a few months, I go to 8.1 and it worked very well. But since August the year last, I am facing problem and my device hung on several occasions. I restored the device, I tried to restored on the plant but no help. Is it possible if I replace win 8 for windows 7 because I feel very uncomfortable.

  Thanks & best regards,

  Hassan jamal Shah

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 
  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• Rotation problem and saving photos

  There is a problem in my computer dell laptop. while trying to turn and save the photos uploaded from my phone, is to show a mistake this windows Photo Viewer cannot save changes to this picture because there is a problem with the file of the image property. How can I solve this problem? Please help me.

  There is a problem in my computer dell laptop. while trying to turn and save the photos uploaded from my phone, is to show a mistake this windows Photo Viewer cannot save changes to this picture because there is a problem with the file of the image property. How can I solve this problem? Please help me.

  ===============================================
  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• "Dell Support Center has stopped working and microsoft has closed the program in order to find a solution."

  Original title: I get a box indicating the dell support center has stopped working and microsoft has closed the program in order to seek a solution, then nothing happens, and the box comes up again and again?

  I get a box on screen telling me that the dell Center support has stopped working, and microsoft has completed the program to check the solution

  It happens every 5 minutes but never comes up with a solution

  Hello

  Refer to this article and follow the steps to help solve this problem.
  Dell Support Center has stopped working error appears
  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=427832

• Vista Home Prem - problems since installation on 26 August updated - USB problems and everything deleted before the update restore points

  I have a Dell XPS 430 quad-processor. Receipt of the August 26 as update automatic updates. Since the computer was restarted after autoupdates, I have problems. Biggest problem is when I switch to another port my 4 ports KVM Trendnet TK - 407K and back on my Dell computer - the computer is blocked and the video is all garbled. My only recourse is to start the computer cold. After the first time it happened, I knew immediately updates, so I went in my restore points to restore back before the update. When I did restore bluescreened, but I was unable to capture data as computer restarted itself and get into the routine of starting fix. Difficulty of startup said it could not solve my problem.

  When I returned to restore to try to restore once again, I found that all my restore points have been removed. I found a utility called the shadow on the web Explorer and installed. He seems to find all my data restore point on the recovery D: drive, but Windows is not seeing them.  I should also mention, usb-wise, given that these updates have been applied, my Canon digital camera is not recognized when I hang it in one of the USB ports.

  Don't know what to do at this point. If I stay on the port on my computer using the KVM switch, my PC at home works well. Unfortunately, it is not realistic that I need to do my job in two laptops that are also connected to the switch.

  I'm tempted to just delete all the updates that have been installed on 8/26 to see if that helps - esp KB973879 I read on this patch causing a lot of problems with other computers.  Another thing that I have not tried is to use the restore from a command prompt application.

  Any suggestions would be greatly appreciated!

  Thank you!

  Hi brab61,

  Welcome to Microsoft Vista answers Forum!
   
  It is good to know that you're not faced problems with your computer.
   
  However, I suggest you go ahead and turn on Windows automatic updates to fix security vulnerabilities and it is beneficial for you to have these updates installed.
   
  Learn more about Windows Update, you can use the following link: -.
  http://www.Microsoft.com/Windows/downloads/windowsupdate/default.mspx
   
   
  You can run the System File Checker tool before you activate the automatic updates.
   
  To run the System File Checker tool, follow these steps:
  1. Click Start and type cmd in the box start the search.
  2 right click "cmd" in the list programs, and then click Run as administrator.
  3. you are asked to enter an administrator password or a confirmation, type your password or click on continue
  4. at the command prompt, type "sfc/scannow", and press ENTER.
   
  Note:- After that, you can now install an update both manually and check the update is causing the problem and let us know to help you and solve the problem.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Hope this information is useful.
   
  Let me know if it worked.
  All the best!
   
  Thank you, and in what concerns:
  Divya R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message: "the site has encountered a problem and cannot display the page you are trying to view", while running Windows updates.

  Original title: Windows updates works do not, cannot get windows updates

  I had to reinstall Windows XP service pack 2. I went to the updates and got this message. The website has encountered a problem and can not display the page that you are trying to view  I tried several times and got the same results.

  The problem is that you need to install Service Pack 3 before being able to get all post-SP3 updates. :-)

  Here's what you need to do:
  Preliminary work:

  Download the installation files of SP3, IE8 and Microsoft Security Essentials, which is an effective antivirus/antimalware program. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials (for MMS)

  1. physically disconnect from the Internet. Also unplug all unnecessary devices!

  2. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  Select "Turn off automatic updates" and click OK.

  3. install the SP3. Restart TWICE.

  4. switch to IE8. Restart TWICE. (Note: it is important to let IE at the level before the upgrade to SP3 IE6.) After you are in SP3, then you can switch IE6 to IE8).

  5 install MSE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  6. make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  (Now you can physically reconnect to the Internet. Update Antivirus program.)

  7. visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  8. reactivate the automatic updates.

• Error "the site has encountered a problem and cannot disply the page you are trying to view" when I run Windows Update

  Original title:

  I just reinstalled xp pro on my Dell D620 and it is not allowing me to run the updates. Error message: the site has encountered a problem and cannot disply the page you are trying to view. I have service pak 2

  Hello

  You get this error when you try to open the windows update or when you check for windows update?

  Check out the following link.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

• problem with update of Windows 'site has encountered a problem and cannot display the page you are trying to view.

  Hi all, I recently rebooted my dell xps m140 older and I would get all the updates from microsoft. When I go to this webiste - http://www.update.microsoft.com/windowsupdate/v6/default.aspx?ln=en-us...i click on purpose and he says:-"the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "no work around for this?

  You must be at Service Pack 3 level before you can use Windows updates.

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  You have not provided us with sufficient detail as to what level you are at

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:
     winver

     A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

• The website has encountered a problem and cannot display the page you are trying to view. Error number: 0x8024400A

  Same problem, hating computer2,

  I have restored my Dell Dimension 3000 for 2005 Winxp sp2, and I went in circles with microsoft.  Bottom line people, Windows XP with Service Pack 2 is no longer supported.  AND most of the WinXP CD come with SP2.  I think that microsoft is TRYING to make it difficult to continue to use Windows XP, they want to update, but I'd rather Win XP Pro!

  See this recent & related thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/the-website-encountered-a-problem-and-cannot/0c919ed3-489f-4b29-b6d1-e7968eb47083

  Or you can follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  Note: The computer must NOT be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

• Need help for - LifeCam.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

  Trying to get my Microsoft Life Cam HD5000 video work.  He worked until a week on Windows XP there and all of a sudden stopped sending this message

  LifeCam.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

  I uninstalled the program and reinstalled and this notice appears again with this 'mistake' being

  AppName: lifecam.exe AppVer: 3.60.253.0 ModName: kernel32.dll

  Any ideas on how to fix as all drivers are up-to-date and update of the software.   As mentioned he wasn't working a week so there is no idea why the video suddenly stopped.

  Concerned

  Hi Concerned25,

  This problem may occur if you have one of the programs listed below, installed in conjunction with the lifecam.

  Earthlink total access.

  Venturi VClient

  Nero

  Studio9 Pinnacle systems software

  F-Secure internet security

  Dell Web cyber coach

  AOL or Yahoo toolbar

  FixIt utility.

  To solve this problem and find workarounds, see the link below.

  http://support.Microsoft.com/kb/953692

• My Dell 1014 works on Windows Vista and I want to install Windows XP on it. "I am train to install a version that is older than the version that I already have."

  My Dell 1014 works on Windows Vista and I want to install Windows XP on it. When I insert the XP CD and try to install, the system throws a message saying that I am trying to install a version that is older than the version that I already have. How to solve this problem?

  original title: Windows XP installation

  Hi Ribhu,

  How did you start the Windows XP installation? This is the start of the Windows CD or Windows itself?

  You can try a new installation of Windows XP after formatting the hard drive Vista and check.

  You can consult the following wire link and check if it helps.

  How can I replace Vista with XP?

  Note: The above mentioned thread contains third party links.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Also check out the link:

  How to install or upgrade to Windows XP

• mail electronic outlook express pop - up-"outlook express has encountered a problem and the need to close.

  I am running XP.

  When I select an email or try to create an e-mail, I get the Outlook Express "pop up" where it is said

  "outlook express has encountered a problem and need to close... Sorry ".  Asks me if I want to send a message

  for Microsoft, when I click on the option, the screen freezes and I have to type the keys del Alt, control, in order to free

  and end of the task.

  You may have a damaged identity especially if it's the default main identity. File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

• Explorer.exe has a problem and needs to close, then no icons on the desktop or taskbar.

  Dell Dimension XP SP3 Media Center. Started with the error box of explorer.exe has a problem and needs to close to logging in any user. Information about the error is explorer.exe 6.0.2900.5512 user 32. dll mod ver 5.1.2600.5512 offset 000d9d9

  When you click on debug a doctor Waston has encountered a problem error box. Error closing box you take at bottom of screen with no icons or taskbar. You bring up the Task Manager, but does not run any new task. After studying the problem found that run sfc/scannow will bring back normal office and functioning of this session. Problem returns the next time the computer is started. Update history audit showed an installation failure of update KB 971029. Reinstalled update and normal office appeared for this session. sfc/scannow application of Service Pack 3 CD 4 times and WinXP CD2 6 times. Using XP CD provided with the computer says it's the wrong CD. Cancellation through sweeping back normal functioning during this session.

  Hi ChrisGangaware,

  · Do you remember all the recent changes on the computer before the show?

  Try the methods below:

  Method 1:

  I suggest to complete the process of analysis of the system, you can follow the steps in the link when he asks for the CD-ROM service pack below: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  Method 2:

  If that does not help, then try to perform the system restore and restore the computer to the previous date it worked great:

  How to restore Windows XP to a previous state: http://support.microsoft.com/kb/306084

• Printing error: "Spooler subsystem APP has encountered a problem and needs to close."

  Original title: cannot print to the network printer.__I have a net wifi Windows XP, SP 3 and an IBM laptop.

  Printers seem to be installed (XP has the printer connected via USB) but when I try to print from IBM I get an error as follows:

  "Subsystem spooler APP has encountered a problem and needs to close."

  The printer is a HP Deskjet D2660 and the LAN is configured correctly by using the wizard.

  I also discovered that the print spooler is never started.

  In addition, even when I start the spooler it remains not said during the next time I start up.

  Can anyone help? I've been banging my head for two weeks.

  Salvation;

  Thanks for responding.

  My IBM ThinkPad running XP - Pro

  My computer is a DELL and running XP-Home Edition

  Printer installed on DELL

  I have a WIRELESS LAN installed by the installation wizard. The net works fine except for the printer.

  Every time I start the spooler does not work. If I set the spooler of runing the choice is never registered. the next time I start up, the spooler does not work.

  I finally asked some experts to solve the problem of no access to the network printer. It took them more than 4 hours (for a cost) to make it work. Everything was going well until the next day. The problem is back. My thought is that the register should be updated so it will retain the corrtions.

  I downloaded the MATS_RUN.printing.exe utility. It corrects everything except this message on the Spooler subsystem.

  Any advice you can give me would be greatly appreciated.