'demand on other devices' shows same device twice

Similar Questions

• Why not Time Capsule shows under "other devices" in the Finder?

  Why not Time Capsule shows under "other devices" in the Finder on my MAC?

  "Devices" are connected directly to a Mac and would include things like USB hard drive, FireWire drive and Thunderbolt drive, etc.

  The Capsule is a "network" connected to a network drive... If the operating system on your Mac behave, Time Capsule will appear in the Shared section.

  If you have added a NAS (Network Attached Storage) disk, this product would also appear in the Shared section.

  A wireless printer can also appear under shared.

• Device Manager is showing "Other devices - Mass Storage Controller" as having no driver installed

  I noticed since I put Windows 7 on my laptop, the Device Manager is showing under 'Other devices' "mass storage controller" has no driver installed and has the famous yellow triangle and an exclamation point. I have a gateway MX6920, if this is of any help.

  Too bad.  I found the solution.

  In the case where you did not, go to:

  http://support.gateway.com/support/drivers/GetFile.asp?ID=21836&UID=290679

  Download driver, nav for cabins (location listed in the included readme file) folder, right-click the setup.exe and "compatibility test".  Go through the wizard and select the option "he worked directly with Windows XP SP2" and it should install with this compatibility.  My SD card reader just read my transflash Reader which contained my my Droid microSD card.  It's all good now.

• Sync doesn't show tab by other devices

  I have two computers running Windows 8.1 FF 26: at work and at home. Both are synchronized, however, whenever I want to see the tabs on the other computer (history - tabs from other devices), all I see is a blank tab. sync the two settings are to synchronize everything (tabs option checked).

  Is this a bug, or is there anything else I should do to see the remote tabs?

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test to see if that helps.

• AVT Guppy 033 B device is the same image twice on the < Session Out > event: Frame made

  Sometimes the event gets the same image twice, but with an increase, correct the image of the index (see photo index 125, 126).

  We use a type AVT Guppy 033 B firewire camera to measure the distance between plants. The camera fires all 40mm the breakpoint of the NI7344 of motion control output.

  We work with the latest Labview and Vision version 8.6.1 could the firewire driver cause this problem. We use the original driver

  Microsoft XP, SP3. Should install us the driver of the TRA instead, other suggestions?

  Thanks for any help.

  

  

  Syn66,

  Looks like your code without taking into account the fact that the Images are passed by reference. It seems that you still spend the same image GetImage and then put it in your queue. Each iteration you will be overwrite the content of the image of the singular and all the elements in the queue is pointing to the same data of the image.

  If you want to structure your code like this, you'll probably want to create an image of each iteration of the loop, call GetImage use it and then put it in the queue. When you treat it and get out of the queue, you can then destroy it. You can optimize the image allocate/free sentence (which may or may not be meaningful) with a strategy of ping-pong by having a separate queue images empty and then you delete the images of this queue empty, GetImage to use and place it in your existing queue of images to process. After the treatment, instead of simply releasing them you would put them back in the empty queue.

  Hope this helps,
  Eric

• Using FF 35.0.1 on three devices, one of them shows the new synchronization, the other two show an old, so what's the problem?

  I have Firefox on three systems using sync to keep them in line. All have been updated to 35.0.1, however, only a new sync watch, the other two show the synchronization of the former. The new synchronization version runs on Win7, the other two move on Win7 and Win8-systems. What can be wrong?

  Finally got round to then separate connection for the synchronization service, and it worked.

  • See synchronize your bookmarks from Firefox, history, passwords, etc. ~ J99

• Get airport utility to forget the other devices on the network view

  Hello

  Is it possible to get the Airport utility to forget other devices, it's on the graphic display? I live on a college campus so it displays about 15 other aircraft from the airport in the vicinity of my home and I would like to see it just mine! When I was updating the name and password on my base station, Airport utility gave me the option when I clicked on the other devices to 'Forget' them, but as soon as I close, then reopen the Airport utility all return and the only option I have to then when I click on another device must enter the password for it (which of course) ", I do not have).

  Outside him cluttering up the graphic display, I wonder whether, if all these devices are recognized as part of 'My network', is sometimes interfere with my access internet and wi - fi as the speed and the same connection seem to go up and down like a yo-yo (sometimes up to 90 Mbps but also weaker than 0.05 Mbps - less than the old dial-up!). I have been informed by our IT Department University detects a problem with your local network, it can "bleached you' which cuts or slows down your connection into a net - and if all these devices are considered by Airport utility as part of my network so I'm guessing that a problem in one of the base stations that could affect the rest.

  So, is it possible to get just the Airport utility will display only my own base station (Airport Extreme) over a wi - fi (Airport Express) extension?

  Excellent question...

  First airport utility keeps a history of all the airports that he never sees and even if you select forget he never forgets... you need to dip down and remove the plist... as with all things Mac.

  / Users/youusername/Library/Application Support/Apple/AirPort/SavedTopos/Topo-nIfc=en0,nHsh=00000000.plist

  There are a lot of them dated for every time the network topography change. Close airport utility and delete the entire lot... a new will be created when you restart.

  What OS you are using... There is an option... but I'm not sure it works... to show only devices you set up.

  So, open airport utility preferences. Click monitor airport basestations for problems... then don't watch that airport base stations which I configured... Tell me what happened to him.

  

  Outside him cluttering up the graphic display, I wonder if, if all these devices are recognized as part of 'my network ',.

  No, it's just the airport utility is a bit too excitable to find other airports of apple around the place and wants to watch all the...

  They are not part of your network... but in small areas Wireless will cause problems... it, without doubt. Most of the colleges banning people who run their own wireless routers because the result is what you feel... CHAOS.

  There are 3 channels for 2.4 ghz and perhaps 6 or 7 for 5 GHz Wireless AC must so much bandwidth, you have more than 3 or 4 channel without overlap... This means that for every 3 airports you have exhausted all channels... (and all airports after it's battery on the mill).

  15 other aircraft from the airport in the vicinity of my home

  So that means at least 5 airports are run on the same channel you are on average. Wireless was never designed to ensure that the density of life. It's only the airports... think how no apple routers wireless there's around you that are not displayed.

  Open any program wireless diagnostic... There is a built-in to your Mac. see how many names wireless mac can pick up.

  I highly recommend that you stick to the use of the 5 GHz band using a different name... and choose depending on the channel works best for you. No Auto and just stick...

  You'll never find that it works without problems... but there is no doubt that life is easier if people started to build a faraday cage to live in or used ethernet.

• Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

  Hello

  First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

  So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

  In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

  -Device type Other devices

  Reference of the manufacturer- Unknown

                       Location     -         Bus PCI 3, device 1, function 3

  
  

  Under device status, it says the following:

                         The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information

  To find a driver for this device, click Update driver.

  Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

  list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

  I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

  computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

  the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

  He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

  I could really use some help here.    Any ideas or help would be greatly appreciated.

  Thank you

  Bryan Ray (Richmond, WILL)

  BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

  Thanks Steve!

  Roger

• Calls to other devices works do not.

  Hi all, after upgrading to iOS 10 and MacOS, I found that my call on other devices does not work, the person can hear me but I can't hear them. I tried reset hard and my iCloud Add/Remove to see if that fixed it, but it didn't. Anyone have any ideas on how to solve this problem, or if someone else has the same problem.

  Hi imaxmain,

  I understand that after update of your devices, you encounter some trouble hearing callers using continuity to make or receive calls on devices other than your iPhone. I know it's nice to be able to handle calls on other devices, so I'm happy to help you.

  To start, make sure that you have correctly configured the parameters of audio output of your iMac. This article contains additional information:
  macOS Sierra: adjust the audio output of your computer settings

  Once you have verified that it is correctly configured, you can troubleshoot your settings of continuity with this article:
  Use continuity to connect to your Mac, iPhone, iPad, iPod touch and Apple Watch - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• I can't sign in with the Apple ID on my nut iPhone it works on my other devices

  Hello. I can not connect to icloud or App Store etc on my iPhone. He sees ID or password invalid, but it works fine on all my other devices. So, I know that the ID and password are correct.

  I use iOS 10 but had the same problem on 9.

  Hello, you can use these troubleshooting steps to resolve your problem iCloud: If you have problems logging into iCloud.com

• USB key used in iMac unrecognized by any other device

  Hi all, I recently encountered a problem using USB keys with my iMac 2010 10.11.3 running OSx.

  My iMac will recognize UBS sticks and allow me to save documents and files for them, but when I insert into any other device (e.g. a few friend PC and Macs, professional printers to Officeworks etc.) the USB stick is not recognized and does not see the same on their system.   Then when I insert the USB in my iMac, it is recognized immediately as well as its content.

  Before that, I was able to share files and documents with family, friends and clients on USB with no problems at all.

  I tried a variety of different USB keys (old and new) and what is happening to all of them, whatever the brand, age, size, etc.   Is produced only for a few months and at first I was in denial and thought that it was my friend PC, but now I see that it is certainly a problem with my iMac.  He may have started happening around the same time that when I upgraded to IE Captain earlier this year.

  Any ideas please?

  Thank you.

  eccydee

  The fact that this happens with different computers suggests that the problem could be the configuration.

  Go to Applications/Utilities/Disk utility. Insert your flash key and look at the settings. It may look like this:

  

  Everything on this list must be verified. While you're there, see if your USB is correctly configured:

  http://www.PCAdvisor.co.UK/how-to/storage/how-format-USB-stick-on-Mac-3434423/

• I signed on the sync, I have the code, but do not seem to be able to enter on my other devices

  Running W7 on PC and laptop and have Android signed all managed to synchronize. the PC has generated 12digit code, but I can't find how to pair the devices I tried using Mozilla, but my computer doesn't seem to have the same screen and can not get the possibility of devices pair

  29,0 Firefox and later use the new synchronization version that uses a Firefox account and use just the name and the password and no longer use a sync (recovery) separated key (the key of synchronization is derived automatically the password).
  
  This version is completely different from the version previously, and you need to install Firefox 29,0 or later versions on all connected devices.
  
  You can enter the name and password of the account Mozilla on other devices with a Firefox 29,0 or later to add additional devices.

  The new version of synchronization used in Firefox 29 and later again use a recovery key to encrypt the data locally before you download, but this recovery key is generated internally from the password of the account in Firefox, so you no longer need to worry about this.

  • https://support.Mozilla.org/KB/how-to-update-to-the-new-Firefox-sync
  • https://wiki.Mozilla.org/identity/Firefox-accounts
  • https://blog.Mozilla.org/services/2014/02/07/a-better-Firefox-sync/

• Wi - Fi calling on other devices

  My Info.

  Verizon

  iPhone 6

  Calls Wi - Fi works when necessary.

  However, I don't have the option of the "appeal of Wi - Fi on other devices" as it shows in the Apple article.

  https://support.Apple.com/en-us/HT203032

  See this photo of the "add a WiFi calling for other devices' which I don't have on my phone.

  Someone has add devices Wi - Fi call for other on their phone for any carrier?

  

  Is this something that other carriers, but Verizon does not work?

  My another parameter for "Calls on other devices" does not show 'ON' as pictured below.

  He said: "when nearby.

  The article seems confused.

  

  Thanks for any input.

  Well, I think that I found my answer for me in the USA anyway.

  https://support.Apple.com/en-us/HT204039

  The carrier must support "Calls over Wi - Fi taken in charge of connected devices iCloud"

  I missed than before on the specification of Verizon that has just "Calling Wi - Fi.

  Looks like I have to wait and see if Verizon never adds to the foregoing.

  Fortunately I can still use calls on the iPhone that I have a low cell signal where I live Wi - Fi.

• Apple TV remote app gen4 records do not in other devices

  Hello

  I tried to configure the remote application as the two House shares and manually, but no work because the application does not appear in 'other devices '. I have read many sites and nothing seems to tackle this problem. I'm on the same wifi network/sharing, I checked my firewall, reset the wifi and disabled the sharing of home and an if function I'm trying to add manually. . Please help, I just can get this to work.

  Thank you!

  I think that you need to update your tvOS last, 9.2. The remote application has been added with this release. While there will be a new entry for Remote App, click on it and you will see devices paired and unpaired.

• HP Elitebook 8570W: driver problem: other devices - device base system and unknown device.

  Hi guys,.

  After doing a clean update on my HP elitebook 8570W I had a few unknown devices in my device manager.

  The first is a device called "base system" in PCI Slot 2 (bus PCI 36, device 0, function 1). I tried everything in my ability to determine what is this device and what drivers to install, so far without success.

  In the same section. other devices, there is another unknown device on PCI Express Root complex that gives me the same headache.

  I hope you guys can help me understand this.

  If you need further information, I will be happy to provide that.

  Kind regards

  Didier

  Hello:

  The base system device is certainly the JMicron card reader needs the driver, not the alcor one.

  You need this driver...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5257503 & swItemId = ob_124666_1 & swEnvOid = 4158

  If the driver above does not installing it automatically, try to install manually.

  To manually install the driver, go to Device Manager, click the Base system device.

  Click the driver tab.  Click on set to update driver.   Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  The file is located in C:\SWSetup\sp63637

  Make sure that the include subfolders is selected and see the driver installs like that.