Wi - Fi calling on other devices

Similar Questions

• Calls to other devices works do not.

  Hi all, after upgrading to iOS 10 and MacOS, I found that my call on other devices does not work, the person can hear me but I can't hear them. I tried reset hard and my iCloud Add/Remove to see if that fixed it, but it didn't. Anyone have any ideas on how to solve this problem, or if someone else has the same problem.

  Hi imaxmain,

  I understand that after update of your devices, you encounter some trouble hearing callers using continuity to make or receive calls on devices other than your iPhone. I know it's nice to be able to handle calls on other devices, so I'm happy to help you.

  To start, make sure that you have correctly configured the parameters of audio output of your iMac. This article contains additional information:
  macOS Sierra: adjust the audio output of your computer settings

  Once you have verified that it is correctly configured, you can troubleshoot your settings of continuity with this article:
  Use continuity to connect to your Mac, iPhone, iPad, iPod touch and Apple Watch - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• I have a 6 s with Verizon iPhone. Can I send/receive calls (using this service and calls on other devices functionality) on my iPhone 5s, who was with AT & T service, but has no service now since I switched to Verizon?

  I have a 6 s with Verizon iPhone. Can I send/receive calls (using this service and calls on other devices functionality) on my iPhone 5s, who was with AT & T service, but has no service now since I switched to Verizon?

  Note: I'm able to get two phones to ring with an incoming call, but the 5s consist not out. Whenever I dial a number, it says call failed.

  Do not dial a number. Try to choose a contact in the contacts App and tapping on telephone button.

  That said, I don't think that outgoing calls work on continuity since another iPhone. given that the iphone is designed to make calls through its own service.

  Document to support that you just did not mention calls from a secondary iPhone at all, it points to Mac, iPad and iPod touch, which leads me to believe that it won't work.

  It runs from devices such as iPads and Macs, who have no other way to place a cell call.

• Cannot disable "invites other devices."

  Hello, I bought a new iphone 6 s, data backed up from my iphone via iCloud 5s upwards.

  Now I have two phones with the same id to icloud. I would like to turn off the function "invites other devices."

  I go to settings-phone calls on other devices. There are some iphone and my macbook. I can't disable macbook, but not the iphone? Why?

  How could I solve this problem? Thanks in advance

  Use another Apple ID on each phone.  Create a new ID for one of them.

• Why is my new iPad Pro so more time to alert me on the texts then my other devices?

  I recently bought an iPad Pro 9.7 inches and looks like a backup and restore of my iPad 2. I have also an iPhone 4S and an iPad 2. I noticed it takes about 30 seconds for my iPad Pro to get them then my other device. I checked all my settings and reset the iPad and it still does not seem a job quicker. receive calls via my iPhone was also not working (after checking all settings). also have had problems with the sending of sms messages from my iPad. Thanks for any help.

  As you know the texts SMS are sent on the portion of cellular signal and are conveyed by the mobile phone service provider. The fact that it affects your phone calls and other messages on other devices - makes me want to suggest that you can be better to talk about this with your carrier

  Also given that the SMS through the iPad is mediated through the service of text messaging on the phone via the continuity - I'd look for a carrier update see if available

• HP Elitebook 8570W: driver problem: other devices - device base system and unknown device.

  Hi guys,.

  After doing a clean update on my HP elitebook 8570W I had a few unknown devices in my device manager.

  The first is a device called "base system" in PCI Slot 2 (bus PCI 36, device 0, function 1). I tried everything in my ability to determine what is this device and what drivers to install, so far without success.

  In the same section. other devices, there is another unknown device on PCI Express Root complex that gives me the same headache.

  I hope you guys can help me understand this.

  If you need further information, I will be happy to provide that.

  Kind regards

  Didier

  Hello:

  The base system device is certainly the JMicron card reader needs the driver, not the alcor one.

  You need this driver...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5257503 & swItemId = ob_124666_1 & swEnvOid = 4158

  If the driver above does not installing it automatically, try to install manually.

  To manually install the driver, go to Device Manager, click the Base system device.

  Click the driver tab.  Click on set to update driver.   Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

  The file is located in C:\SWSetup\sp63637

  Make sure that the include subfolders is selected and see the driver installs like that.

• updated my pavilion tx1000 for win 7 and missing a driver. under other devices - coprocessor... help

  Updated my tx1000 Pavilion to Win 7 and missing a driver I can't find online. The missing driver is listed under other devices and called coprocessor... help please

  Hello:

  Here is the link for the driver you need.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-51717-1&CC=US&DLC=en&LC=en&os=2093&Product=3185028&sw_lang=

  Paul

• I use windows XP service pack 3 and I can't connect to the internet on your laptop even if I can connect using my other devices.

  I have tried everything I can think of nothing doesn't. The strange thing is that it connects as usual and I can even use Skype and download updates, but I can't surf the net. I can't understand. I have tried ipconfig release and then renew, repairs of stack TCP/IP, Winsock reset and the use of different browsers. I ran the XP connection troubleshooting tool and received the following message, that this is probably caused by your firewall settings

  "check the settings of the firewall for the HTTP port (80), HTTPS (443) AND ftp PORT (21) port.

  The problem is that I can't change my firewall settings that I can not start the firewall and get this error message every time I try

  Cannot start the service Windows Firewall/Internet Connection Sharing (ICS) on the Local computer.
  Error 0 x 80004015: the class is configured to run as a different caller's security id

  I downloaded the hotfix from microsoft, but it made no difference unfortunately.

  I use AVG 2011 antivirus protection. I tried connecting via the wireless and wired. I did ipconfig and tried to rattle of my other devices and my router and everything seems normal because they can communicate with each other. See below.

  Microsoft Windows XP [Version 5.1.2600]

  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and Settings\Administrateur > ipconfig

  Windows IP configuration

  Ethernet wireless network connection card:

  The connection-specific DNS suffix. : gateway.2wire.net

  IP address...: 192.168.1.72

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. : 192.168.1.254

  C:\Documents and Settings\Administrateur > ping 127.0.0.1

  Ping 127.0.0.1 with 32 bytes of data:

  Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">

  Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">

  Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">

  Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">

  Ping statistics for 127.0.0.1:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 0ms, Maximum = 0ms, average = 0ms

  C:\Documents and Settings\Administrateur > ping 192.168.1.72

  Ping 192.168.1.72 with 32 bytes of data:

  Response to 192.168.1.72: bytes = 32 time<1ms ttl="">

  Response to 192.168.1.72: bytes = 32 time<1ms ttl="">

  Response to 192.168.1.72: bytes = 32 time<1ms ttl="">

  Response to 192.168.1.72: bytes = 32 time<1ms ttl="">

  Ping statistics for 192.168.1.72:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 0ms, Maximum = 0ms, average = 0ms

  C:\Documents and Settings\Administrateur > ping 192.168.1.254

  Ping 192.168.1.254 with 32 bytes of data:

  Request timed out.

  Response from 192.168.1.254: bytes = 32 time = 2ms TTL = 255

  Response from 192.168.1.254: bytes = 32 time = 4 ms TTL = 255

  Response from 192.168.1.254: bytes = 32 time = 1ms TTL = 255

  Ping statistics for 192.168.1.254:

  Packets: Sent = 4, received = 3, Lost = 1 (25% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 1ms, Maximum = 4ms, average = 2ms

  C:\Documents and Settings\Administrateur > ping 192.168.1.70

  192.168.1.70 ping with 32 bytes of data:

  Response of 192.168.1.70: bytes = 32 time = 2ms TTL = 128

  Response of 192.168.1.70: bytes = 32 time = 94ms TTL = 128

  Response of 192.168.1.70: bytes = 32 time = 8ms TTL = 128

  Response of 192.168.1.70: bytes = 32 time = 13th month TTL = 128

  Ping statistics for 192.168.1.70:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 2ms, Maximum = 94ms, average = 29ms

  C:\Documents and Settings\Administrateur > ping 192.168.1.254

  Ping 192.168.1.254 with 32 bytes of data:

  Response from 192.168.1.254: bytes = 32 time = 1ms TTL = 255

  Response from 192.168.1.254: bytes = 32 time = 2ms TTL = 255

  Response from 192.168.1.254: bytes = 32 time = 3ms TTL = 255

  Response from 192.168.1.254: bytes = 32 time = 3ms TTL = 255

  Ping statistics for 192.168.1.254:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 1ms, Maximum = 3ms, average = 2ms

  C:\Documents and Settings\Administrateur >

  I worked on it for 2 days straight trying to find a solution and this is my last resort. I really hope that someone can help me because I even tried technicians internet ATT who couldn't help me. There must be a solution out there. I must be missing something. It must be a software problem or something simple. Help!

  Hello

  You can check this link:

  http://support.Microsoft.com/kb/920074

  Note:

  It implies also on Windows XP SP3

• Network adapters, other devices, display adapters

  Hello

  I recently had my HP Pavilion G7 accident on me who took place of windows 8 (OEM), I was unable to restore. I decided to downgrade to windows vista and do a clean install due to the fact that I cannot locate my w8 installation disc. The problem im having is my network, display adapters, and other devices are not working and showing a yellow triangle with an exclamation point and ive done some research and tried fixed like unistalling and reinstalling but it still doesn't work do not.

  Here's what is coming with the yellow exclamation points

  network cards

  -acer NIC - 559A pro / 100 + with alert on LAN 2

  Other devices

  -Bus Controller SM

  -Controller universal serial host

  -(usb) universal serial bus controller

  Unknown device-

  I feel like if I can get online and get windows to update some of these things will be clear and correct. Now I got problems with realtek PCIe FE Family Controller but I went to found the driver for it.

  Here is some info system:

  system manufacturer: Hewlett-Packard

  system model: notebook pc HP pavilion g7

  system type: x 86 (32-bit) pc-based

  Processor: AMD A8-4500 M APU WITH RADEOM (TM) HD GRAPHICS, 1900 HMZ 4 CARROTS

  I called HP support free as my warranty has increased and they told me it looked like a software problem or corruption and they were confident, they could fix, but they wanted me to pay for technical support which I don't mind, but it would be a monthly service fee which I did not need constant technical support it is the first time ive met this problem they also told me that the tech would have me to enter some commands at the command prompt to resolve this problem. I mentioned this because maybe someone knows what he was talking about.

  My name is Ronald any help would be MUCH appreciated.

  If I don't answer any suggestions or any help, someone gives me im not ignoring you but I work 12 hours a day, 4 days a week, but I will check at least once a day

  Hi, Ronald:

  First install the amd chipset drivers and reboot.  You want the first file on the Web page.

  To install the smbus and usb 3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  You can then use all the W7 x 64 drivers and software of this model in the g7 on your own, except the wireless.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h10025.www1.HP.com/ewfrf/wc/product?product=5275619&LC=en&cc=us&DLC=en&task=

  Try this driver for the wireless card...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_123191_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  The PCI device needs the Realtek card reader driver (under the storage section)

  The Ethernet controller needs the Realtek LAN driver (under the section network)

  The unknown device needs the driver HP Protectsmart (under section solutions)

• Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

  Hello

  First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

  So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

  In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

  -Device type Other devices

  Reference of the manufacturer- Unknown

                       Location     -         Bus PCI 3, device 1, function 3

  
  

  Under device status, it says the following:

                         The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information

  To find a driver for this device, click Update driver.

  Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

  list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

  I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

  computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

  the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

  He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

  I could really use some help here.    Any ideas or help would be greatly appreciated.

  Thank you

  Bryan Ray (Richmond, WILL)

  BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

  Thanks Steve!

  Roger

• PC does NOT automatically connect to the wifi network, other devices do

  I have a pc windows 7, and we have used to have a SIEMENS router + modem via a wifi network. The pc would always auto connect to it.

  We now have a new feature called HOTBOX, used by the new company of internet infrastructure that we moved - HOT.
  I did change the password first because who really cares? His writings on the HOTBOX, my family and my guests can know, and thanks for the auto connect, which i obviously checked when I connected to it, everything should be good. Alas.
  Other devices connect, it's my smartphone nokia, iPhone, PC. Only this computer can not.
  Note: the first time where I put the password on this computer to connect, there is also an option for a fast connection or something like that. I did with my nokia phone, but not with pc - it's an easy way by pressing on a button of twinning on the refrigerator, then you can easily connect or w/e.
  IN ANY CASE! This option seems to have disappeared! Now all that appears when I click on the network name is the password field and a checkbox to auto-connect, no quick option.
  Any help is appreciated. Thank you.

  Hello

  Welcome to the Microsoft community.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• I can't sign in with the Apple ID on my nut iPhone it works on my other devices

  Hello. I can not connect to icloud or App Store etc on my iPhone. He sees ID or password invalid, but it works fine on all my other devices. So, I know that the ID and password are correct.

  I use iOS 10 but had the same problem on 9.

  Hello, you can use these troubleshooting steps to resolve your problem iCloud: If you have problems logging into iCloud.com

• How to share movies of iphone4 with access to other devices like ios7 and icloud desktop

  How do I share movies THST, I bought movies itunes iPhone4 with other devices such as desktop?

  My iPhone4 ios are 7 and it does not support icloud

  Download your purchases past - Apple Support

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices &amp; their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• I have an iPhone 6 and get this message. Continue coarse iCloud on this iPhone approve him to one of your other devices using iCloud or enter your iCloud security code.  I don't know my security code and only have my book of power with me.

  I get this message on my iPhone 6.  To continue using Icloud on this iPhone, do agree with your other devices using iCloud or either your iCloud security code.  I don't know my security code.  I have my book of power with me how check my iPhone 6.

  Mike.

  Hello

  For checking your apple iphone should send you a massage to your other device

  With a code.

  See you soon

  Brian